2 * Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that: (1) source code distributions
7 * retain the above copyright notice and this paragraph in its entirety, (2)
8 * distributions including binary code include the above copyright notice and
9 * this paragraph in its entirety in the documentation or other materials
10 * provided with the distribution, and (3) all advertising materials mentioning
11 * features or use of this software display the following acknowledgement:
12 * ``This product includes software developed by the University of California,
13 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
14 * the University nor the names of its contributors may be used to endorse
15 * or promote products derived from this software without specific prior
17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
23 static const char rcsid
[] =
24 "@(#) $Header: /tcpdump/master/tcpdump/print-fddi.c,v 1.48 2000-12-18 05:41:59 guy Exp $ (LBL)";
31 #include <sys/param.h>
33 #include <sys/socket.h>
35 #include <sys/ioctl.h>
37 #include <netinet/in.h>
45 #include "interface.h"
46 #include "addrtoname.h"
47 #include "ethertype.h"
53 * Some FDDI interfaces use bit-swapped addresses.
55 #if defined(ultrix) || defined(__alpha) || defined(__bsdi) || defined(__NetBSD__)
62 * FDDI support for tcpdump, by Jeffrey Mogul [DECWRL], June 1992
64 * Based in part on code by Van Jacobson, which bears this note:
66 * NOTE: This is a very preliminary hack for FDDI support.
67 * There are all sorts of wired in constants & nothing (yet)
68 * to print SMT packets as anything other than hex dumps.
69 * Most of the necessary changes are waiting on my redoing
70 * the "header" that a kernel fddi driver supplies to bpf: I
71 * want it to look like one byte of 'direction' (0 or 1
72 * depending on whether the packet was inbound or outbound),
73 * two bytes of system/driver dependent data (anything an
74 * implementor thinks would be useful to filter on and/or
75 * save per-packet, then the real 21-byte FDDI header.
76 * Steve McCanne & I have also talked about adding the
77 * 'direction' byte to all bpf headers (e.g., in the two
78 * bytes of padding on an ethernet header). It's not clear
79 * we could do this in a backwards compatible way & we hate
80 * the idea of an incompatible bpf change. Discussions are
83 * Also, to really support FDDI (and better support 802.2
84 * over ethernet) we really need to re-think the rather simple
85 * minded assumptions about fixed length & fixed format link
86 * level headers made in gencode.c. One day...
91 static u_char fddi_bit_swap
[] = {
92 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
93 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
94 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
95 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
96 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
97 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
98 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
99 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
100 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
101 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
102 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
103 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
104 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
105 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
106 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
107 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
108 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
109 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
110 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
111 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
112 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
113 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
114 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
115 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
116 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
117 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
118 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
119 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
120 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
121 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
122 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
123 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
127 * Print FDDI frame-control bits
130 print_fddi_fc(u_char fc
)
134 case FDDIFC_VOID
: /* Void frame */
138 case FDDIFC_NRT
: /* Nonrestricted token */
142 case FDDIFC_RT
: /* Restricted token */
146 case FDDIFC_SMT_INFO
: /* SMT Info */
150 case FDDIFC_SMT_NSA
: /* SMT Next station adrs */
154 case FDDIFC_MAC_BEACON
: /* MAC Beacon frame */
158 case FDDIFC_MAC_CLAIM
: /* MAC Claim frame */
163 switch (fc
& FDDIFC_CLFF
) {
166 printf("mac%1x ", fc
& FDDIFC_ZZZZ
);
170 printf("smt%1x ", fc
& FDDIFC_ZZZZ
);
173 case FDDIFC_LLC_ASYNC
:
174 printf("async%1x ", fc
& FDDIFC_ZZZZ
);
177 case FDDIFC_LLC_SYNC
:
178 printf("sync%1x ", fc
& FDDIFC_ZZZZ
);
181 case FDDIFC_IMP_ASYNC
:
182 printf("imp_async%1x ", fc
& FDDIFC_ZZZZ
);
185 case FDDIFC_IMP_SYNC
:
186 printf("imp_sync%1x ", fc
& FDDIFC_ZZZZ
);
196 /* Extract src, dst addresses */
198 extract_fddi_addrs(const struct fddi_header
*fddip
, char *fsrc
, char *fdst
)
204 * bit-swap the fddi addresses (isn't the IEEE standards
205 * process wonderful!) then convert them to names.
207 for (i
= 0; i
< 6; ++i
)
208 fdst
[i
] = fddi_bit_swap
[fddip
->fddi_dhost
[i
]];
209 for (i
= 0; i
< 6; ++i
)
210 fsrc
[i
] = fddi_bit_swap
[fddip
->fddi_shost
[i
]];
213 memcpy(fdst
, (char *)fddip
->fddi_dhost
, 6);
214 memcpy(fsrc
, (char *)fddip
->fddi_shost
, 6);
219 * Print the FDDI MAC header
222 fddi_print(register const struct fddi_header
*fddip
, register u_int length
,
223 register const u_char
*fsrc
, register const u_char
*fdst
)
225 char *srcname
, *dstname
;
227 srcname
= etheraddr_string(fsrc
);
228 dstname
= etheraddr_string(fdst
);
231 (void) printf("%02x %s %s %d: ",
236 printf("%s %s %d: ", srcname
, dstname
, length
);
238 (void) print_fddi_fc(fddip
->fddi_fc
);
239 (void) printf("%s %s %d: ", srcname
, dstname
, length
);
244 fddi_smt_print(const u_char
*p
, u_int length
)
246 printf("<SMT printer not yet implemented>");
250 * This is the top level routine of the printer. 'sp' is the points
251 * to the FDDI header of the packet, 'tvp' is the timestamp,
252 * 'length' is the length of the packet off the wire, and 'caplen'
253 * is the number of bytes actually captured.
256 fddi_if_print(u_char
*pcap
, const struct pcap_pkthdr
*h
,
257 register const u_char
*p
)
259 u_int caplen
= h
->caplen
;
260 u_int length
= h
->len
;
261 const struct fddi_header
*fddip
= (struct fddi_header
*)p
;
262 struct ether_header ehdr
;
263 u_short extracted_ethertype
;
267 if (caplen
< FDDI_HDRLEN
) {
272 * Get the FDDI addresses into a canonical form
274 extract_fddi_addrs(fddip
, (char *)ESRC(&ehdr
), (char *)EDST(&ehdr
));
276 * Some printers want to get back at the link level addresses,
277 * and/or check that they're not walking off the end of the packet.
278 * Rather than pass them all the way down, we set these globals.
280 snapend
= p
+ caplen
;
282 * Actually, the only printer that uses packetp is print-bootp.c,
283 * and it assumes that packetp points to an Ethernet header. The
284 * right thing to do is to fix print-bootp.c to know which link
285 * type is in use when it excavates. XXX
287 packetp
= (u_char
*)&ehdr
;
290 fddi_print(fddip
, length
, ESRC(&ehdr
), EDST(&ehdr
));
292 /* Skip over FDDI MAC header */
293 length
-= FDDI_HDRLEN
;
295 caplen
-= FDDI_HDRLEN
;
297 /* Frame Control field determines interpretation of packet */
298 extracted_ethertype
= 0;
299 if ((fddip
->fddi_fc
& FDDIFC_CLFF
) == FDDIFC_LLC_ASYNC
) {
300 /* Try to print the LLC-layer header & higher layers */
301 if (llc_print(p
, length
, caplen
, ESRC(&ehdr
), EDST(&ehdr
),
302 &extracted_ethertype
) == 0) {
304 * Some kinds of LLC packet we cannot
305 * handle intelligently
308 fddi_print(fddip
, length
,
309 ESRC(&ehdr
), EDST(&ehdr
));
310 if (extracted_ethertype
) {
312 etherproto_string(htons(extracted_ethertype
)));
314 if (!xflag
&& !qflag
)
315 default_print(p
, caplen
);
317 } else if ((fddip
->fddi_fc
& FDDIFC_CLFF
) == FDDIFC_SMT
)
318 fddi_smt_print(p
, caplen
);
320 /* Some kinds of FDDI packet we cannot handle intelligently */
322 fddi_print(fddip
, length
, ESRC(&ehdr
), EDST(&ehdr
));
323 if (!xflag
&& !qflag
)
324 default_print(p
, caplen
);
327 default_print(p
, caplen
);