3 # This script runs one build with setup environment variables: BUILD_LIBPCAP,
4 # REMOTE, CC, CMAKE, CRYPTO and SMB.
6 : "${BUILD_LIBPCAP:=no}"
12 : "${TCPDUMP_TAINTED:=no}"
13 : "${TCPDUMP_CMAKE_TAINTED:=no}"
15 # At least one OS (AIX 7) where this software can build does not have at least
16 # one command (mktemp) required for a successful run of "make releasetar".
17 : "${TEST_RELEASETAR:=yes}"
20 # Install directory prefix
21 if [ -z "$PREFIX" ]; then
22 PREFIX
=`mktempdir tcpdump_build`
23 echo "PREFIX set to '$PREFIX'"
26 TCPDUMP_BIN
="$PREFIX/bin/tcpdump"
32 # The norm is to compile without any warnings, but tcpdump builds on some OSes
33 # are not warning-free for one or another reason. If you manage to fix one of
34 # these cases, please remember to remove respective exemption below to help any
35 # later warnings in the same matrix subset trigger an error.
37 case `cc_id`/`os_id` in
42 [ "$TCPDUMP_TAINTED" != yes ] && CFLAGS
=`cc_werr_cflags`
44 case `cc_id`/`os_id` in
46 # Work around https://www.illumos.org/issues/16369
47 [ "`uname -o`" = illumos
] && grep -Fq OpenIndiana
/etc
/release
&& CFLAGS
="-Wno-fuse-ld-path${CFLAGS:+ $CFLAGS}"
51 # If necessary, set TCPDUMP_CMAKE_TAINTED here to exempt particular cmake from
52 # warnings. Use as specific terms as possible (e.g. some specific version and
55 [ "$TCPDUMP_CMAKE_TAINTED" != yes ] && CMAKE_OPTIONS
='-Werror=dev'
57 if [ "$CMAKE" = no
]; then
58 if [ "$BUILD_LIBPCAP" = yes ]; then
59 echo "Using PKG_CONFIG_PATH=$PKG_CONFIG_PATH"
60 run_after_echo .
/autogen.sh
61 run_after_echo .
/configure
--with-crypto="$CRYPTO" \
62 --enable-smb="$SMB" --prefix="$PREFIX"
63 LD_LIBRARY_PATH
="$PREFIX/lib"
64 export LD_LIBRARY_PATH
66 run_after_echo .
/autogen.sh
67 run_after_echo .
/configure
--with-crypto="$CRYPTO" \
68 --enable-smb="$SMB" --prefix="$PREFIX" --disable-local-libpcap
71 # See libpcap build.sh for the rationale.
72 run_after_echo
rm -rf CMakeFiles
/ CMakeCache.txt build
/
73 run_after_echo mkdir build
74 run_after_echo
cd build
75 if [ "$BUILD_LIBPCAP" = yes ]; then
76 run_after_echo cmake
${CMAKE_OPTIONS:+"$CMAKE_OPTIONS"} \
77 -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" \
78 ${CFLAGS:+-DEXTRA_CFLAGS="$CFLAGS"} \
79 -DCMAKE_INSTALL_PREFIX="$PREFIX" -DCMAKE_PREFIX_PATH="$PREFIX" ..
80 LD_LIBRARY_PATH
="$PREFIX/lib"
81 export LD_LIBRARY_PATH
83 run_after_echo cmake
${CMAKE_OPTIONS:+"$CMAKE_OPTIONS"} \
84 -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" \
85 ${CFLAGS:+-DEXTRA_CFLAGS="$CFLAGS"} \
86 -DCMAKE_INSTALL_PREFIX="$PREFIX" ..
89 run_after_echo
"$MAKE_BIN" -s clean
90 if [ "$CMAKE" = no
]; then
91 run_after_echo
"$MAKE_BIN" -s ${CFLAGS:+CFLAGS="$CFLAGS"}
93 # The "-s" flag is a no-op and CFLAGS is set using -DEXTRA_CFLAGS above.
94 run_after_echo
"$MAKE_BIN"
96 run_after_echo
"$MAKE_BIN" install
97 print_so_deps
"$TCPDUMP_BIN"
98 run_after_echo
"$TCPDUMP_BIN" -h
99 # The "-D" flag depends on HAVE_PCAP_FINDALLDEVS and it would not be difficult
100 # to run the command below only if the macro is defined. That said, it seems
101 # more useful to run it anyway: every system that currently runs this script
102 # has pcap_findalldevs(), thus if the macro isn't defined, it means something
103 # went wrong in the build process (as was observed with GCC, CMake and the
104 # system libpcap on Solaris 11).
105 run_after_echo
"$TCPDUMP_BIN" -D
106 if [ "$CIRRUS_CI" = true
]; then
107 # Likewise for the "-J" flag and HAVE_PCAP_SET_TSTAMP_TYPE.
108 run_after_echo sudo \
109 ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
111 run_after_echo sudo \
112 ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
115 if [ "$BUILD_LIBPCAP" = yes ]; then
116 run_after_echo
"$MAKE_BIN" check
118 if [ "$CMAKE" = no
]; then
119 [ "$TEST_RELEASETAR" = yes ] && run_after_echo
"$MAKE_BIN" releasetar
121 if [ "$CIRRUS_CI" = true
]; then
122 run_after_echo sudo \
123 ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
124 "$TCPDUMP_BIN" -#n -c 10
127 if [ "$DELETE_PREFIX" = yes ]; then
128 run_after_echo
rm -rf "$PREFIX"
130 # vi: set tabstop=4 softtabstop=0 expandtab shiftwidth=4 smarttab autoindent :