University.
+ Yen Yen Lim
The original LBL crew:
Steve McCanne
VERSION
aclocal.m4
arcnet.h
+atmuni31.h
bpf/net/bpf.h
bpf/net/bpf_filter.c
bpf_dump.c
savefile.c
scanner.l
sll.h
+sunatmpos.h
--- /dev/null
+/*
+ * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Yen Yen Lim and
+ North Dakota State University
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/atmuni31.h,v 1.1 2002-07-11 09:06:32 guy Exp $ (LBL)
+ */
+
+/* Based on UNI3.1 standard by ATM Forum */
+
+/* ATM traffic types based on VPI=0 and (the following VCI */
+#define PPC 0x05 /* Point-to-point signal msg */
+#define BCC 0x02 /* Broadcast signal msg */
+#define OAMF4SC 0x03 /* Segment OAM F4 flow cell */
+#define OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */
+#define METAC 0x01 /* Meta signal msg */
+#define ILMIC 0x10 /* ILMI msg */
+
+/* Q.2931 signalling messages */
+#define CALL_PROCEED 0x02 /* call proceeding */
+#define CONNECT 0x07 /* connect */
+#define CONNECT_ACK 0x0f /* connect_ack */
+#define SETUP 0x05 /* setup */
+#define RELEASE 0x4d /* release */
+#define RELEASE_DONE 0x5a /* release_done */
+#define RESTART 0x46 /* restart */
+#define RESTART_ACK 0x4e /* restart ack */
+#define STATUS 0x7d /* status */
+#define STATUS_ENQ 0x75 /* status ack */
+#define ADD_PARTY 0x80 /* add party */
+#define ADD_PARTY_ACK 0x81 /* add party ack */
+#define ADD_PARTY_REJ 0x82 /* add party rej */
+#define DROP_PARTY 0x83 /* drop party */
+#define DROP_PARTY_ACK 0x84 /* drop party ack */
+
+/* Information Element Parameters in the signalling messages */
+#define CAUSE 0x08 /* cause */
+#define ENDPT_REF 0x54 /* endpoint reference */
+#define AAL_PARA 0x58 /* ATM adaptation layer parameters */
+#define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */
+#define CONNECT_ID 0x5a /* connection identifier */
+#define QOS_PARA 0x5c /* quality of service parameters */
+#define B_HIGHER 0x5d /* broadband higher layer information */
+#define B_BEARER 0x5e /* broadband bearer capability */
+#define B_LOWER 0x5f /* broadband lower information */
+#define CALLING_PARTY 0x6c /* calling party number */
+#define CALLED_PARTY 0x70 /* called party nmber */
+
+#define Q2931 0x09
+
+/* Q.2931 signalling general messages format */
+#define PROTO_POS 0 /* offset of protocol discriminator */
+#define CALL_REF_POS 2 /* offset of call reference value */
+#define MSG_TYPE_POS 5 /* offset of message type */
+#define MSG_LEN_POS 7 /* offset of mesage length */
+#define IE_BEGIN_POS 9 /* offset of first information element */
+
+/* format of signalling messages */
+#define TYPE_POS 0
+#define LEN_POS 2
+#define FIELD_BEGIN_POS 4
*
* @(#)bpf.h 7.1 (Berkeley) 5/7/91
*
- * @(#) $Header: /tcpdump/master/libpcap/bpf/net/Attic/bpf.h,v 1.60 2002-07-11 07:56:45 guy Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/bpf/net/Attic/bpf.h,v 1.61 2002-07-11 09:06:47 guy Exp $ (LBL)
*/
#ifndef BPF_MAJOR_VERSION
#define DLT_IP_OVER_FC 122
/*
- * Reserved for capturing on Solaris with SunATM.
+ * This is for Full Frontal ATM on Solaris with SunATM, with a
+ * pseudo-header followed by an AALn PDU.
+ *
+ * There may be other forms of Full Frontal ATM on other OSes,
+ * with different pseudo-headers.
+ *
+ * If ATM software returns a pseudo-header with VPI/VCI information
+ * (and, ideally, packet type information, e.g. signalling, ILMI,
+ * LANE, LLC-multiplexed traffic, etc.), it should not use
+ * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
+ * and the like don't have to infer the presence or absence of a
+ * pseudo-header and the form of the pseudo-header.
*/
#define DLT_SUNATM 123 /* Solaris+SunATM */
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/gencode.c,v 1.168 2002-07-11 07:56:44 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/gencode.c,v 1.169 2002-07-11 09:06:32 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "nlpid.h"
#include "llc.h"
#include "gencode.h"
+#include "atmuni31.h"
+#include "sunatmpos.h"
#include "ppp.h"
#include "sll.h"
#include "arcnet.h"
static struct block *gen_cmp_gt(u_int, u_int, bpf_int32);
static struct block *gen_mcmp(u_int, u_int, bpf_int32, bpf_u_int32);
static struct block *gen_bcmp(u_int, u_int, const u_char *);
+static struct block *gen_ncmp(bpf_u_int32, bpf_u_int32, bpf_u_int32,
+ bpf_u_int32, bpf_u_int32, int);
static struct block *gen_uncond(int);
static inline struct block *gen_true(void);
static inline struct block *gen_false(void);
static struct block *gen_linktype(int);
static struct block *gen_snap(bpf_u_int32, bpf_u_int32, u_int);
+static struct block *gen_llc(int);
static struct block *gen_hostop(bpf_u_int32, bpf_u_int32, int, int, u_int, u_int);
#ifdef INET6
static struct block *gen_hostop6(struct in6_addr *, struct in6_addr *, int, int, u_int, u_int);
static struct slist *xfer_to_a(struct arth *);
static struct block *gen_len(int, int);
+static struct block *gen_msg_abbrev(int type);
+
static void *
newchunk(n)
u_int n;
return b;
}
+static struct block *
+gen_ncmp(datasize, offset, mask, jtype, jvalue, reverse)
+ bpf_u_int32 datasize, offset, mask, jtype, jvalue;
+ int reverse;
+{
+ struct slist *s;
+ struct block *b;
+
+ s = new_stmt(BPF_LD|datasize|BPF_ABS);
+ s->s.k = offset;
+
+ if (mask != 0xffffffff) {
+ s->next = new_stmt(BPF_ALU|BPF_AND|BPF_K);
+ s->next->s.k = mask;
+ }
+
+ b = new_block(JMP(jtype));
+ b->stmts = s;
+ b->s.k = jvalue;
+ if (reverse && (jtype == BPF_JGT || jtype == BPF_JGE))
+ gen_not(b);
+ return b;
+}
+
/*
* Various code constructs need to know the layout of the data link
* layer. These variables give the necessary offsets.
*/
static u_int off_linktype;
+/*
+ * TRUE if the link layer includes an ATM pseudo-header.
+ */
+static int is_atm = 0;
+
+/*
+ * These are offsets for the ATM pseudo-header.
+ */
+static u_int off_vpi;
+static u_int off_vci;
+static u_int off_proto;
+
+/*
+ * This is the offset to the message type for Q.2931 messages.
+ */
+static u_int off_msg_type;
+
/*
* These are offsets to the beginning of the network-layer header.
*
{
linktype = type;
+ /*
+ * Assume it's not raw ATM with a pseudo-header, for now.
+ */
+ is_atm = 0;
+ off_vpi = -1;
+ off_vci = -1;
+ off_proto = -1;
+ off_msg_type = -1;
+
orig_linktype = -1;
orig_nl = -1;
orig_nl_nosnap = -1;
off_nl_nosnap = 3; /* 802.2 */
return;
+ case DLT_SUNATM:
+ /*
+ * Full Frontal ATM; you get AALn PDUs with an ATM
+ * pseudo-header.
+ */
+ is_atm = 1;
+ off_linktype = SUNATM_PKT_BEGIN_POS;
+ off_vpi = SUNATM_VPI_POS;
+ off_vci = SUNATM_VCI_POS;
+ off_proto = PROTO_POS;
+ off_msg_type = SUNATM_PKT_BEGIN_POS+MSG_TYPE_POS;
+ off_nl = SUNATM_PKT_BEGIN_POS+8; /* 802.2+SNAP */
+ off_nl_nosnap = SUNATM_PKT_BEGIN_POS+3; /* 802.2 */
+ return;
+
case DLT_RAW:
off_linktype = -1;
off_nl = 0;
case DLT_IEEE802:
case DLT_ATM_RFC1483:
case DLT_ATM_CLIP:
+ return gen_llc(proto);
+ break;
+
+ case DLT_SUNATM:
/*
- * XXX - handle token-ring variable-length header.
+ * Check for LLC encapsulation and then check the protocol.
+ * XXX - also check for LANE and then check for an Ethernet
+ * type?
*/
- switch (proto) {
-
- case LLCSAP_ISONS:
- return gen_cmp(off_linktype, BPF_H, (long)
- ((LLCSAP_ISONS << 8) | LLCSAP_ISONS));
-
- case LLCSAP_NETBEUI:
- return gen_cmp(off_linktype, BPF_H, (long)
- ((LLCSAP_NETBEUI << 8) | LLCSAP_NETBEUI));
-
- case LLCSAP_IPX:
- /*
- * XXX - are there ever SNAP frames for IPX on
- * non-Ethernet 802.x networks?
- */
- return gen_cmp(off_linktype, BPF_B,
- (bpf_int32)LLCSAP_IPX);
-
- case ETHERTYPE_ATALK:
- /*
- * 802.2-encapsulated ETHERTYPE_ATALK packets are
- * SNAP packets with an organization code of
- * 0x080007 (Apple, for Appletalk) and a protocol
- * type of ETHERTYPE_ATALK (Appletalk).
- *
- * XXX - check for an organization code of
- * encapsulated Ethernet as well?
- */
- return gen_snap(0x080007, ETHERTYPE_ATALK,
- off_linktype);
- break;
-
- default:
- /*
- * XXX - we don't have to check for IPX 802.3
- * here, but should we check for the IPX Ethertype?
- */
- if (proto <= ETHERMTU) {
- /*
- * This is an LLC SAP value, so check
- * the DSAP.
- */
- return gen_cmp(off_linktype, BPF_B,
- (bpf_int32)proto);
- } else {
- /*
- * This is an Ethernet type; we assume
- * that it's unlikely that it'll
- * appear in the right place at random,
- * and therefore check only the
- * location that would hold the Ethernet
- * type in a SNAP frame with an organization
- * code of 0x000000 (encapsulated Ethernet).
- *
- * XXX - if we were to check for the SNAP DSAP
- * and LSAP, as per XXX, and were also to check
- * for an organization code of 0x000000
- * (encapsulated Ethernet), we'd do
- *
- * return gen_snap(0x000000, proto,
- * off_linktype);
- *
- * here; for now, we don't, as per the above.
- * I don't know whether it's worth the
- * extra CPU time to do the right check
- * or not.
- */
- return gen_cmp(off_linktype+6, BPF_H,
- (bpf_int32)proto);
- }
- }
- break;
+ b0 = gen_atmfield_code(A_PROTOTYPE, PT_LLC, BPF_JEQ, 0);
+ b1 = gen_llc(proto);
+ gen_and(b0, b1);
+ return b1;
case DLT_LINUX_SLL:
switch (proto) {
return gen_bcmp(offset, 8, snapblock);
}
+/*
+ * Check for a given protocol value assuming an 802.2 LLC header.
+ */
+static struct block *
+gen_llc(proto)
+ int proto;
+{
+ /*
+ * XXX - handle token-ring variable-length header.
+ */
+ switch (proto) {
+
+ case LLCSAP_ISONS:
+ return gen_cmp(off_linktype, BPF_H, (long)
+ ((LLCSAP_ISONS << 8) | LLCSAP_ISONS));
+
+ case LLCSAP_NETBEUI:
+ return gen_cmp(off_linktype, BPF_H, (long)
+ ((LLCSAP_NETBEUI << 8) | LLCSAP_NETBEUI));
+
+ case LLCSAP_IPX:
+ /*
+ * XXX - are there ever SNAP frames for IPX on
+ * non-Ethernet 802.x networks?
+ */
+ return gen_cmp(off_linktype, BPF_B, (bpf_int32)LLCSAP_IPX);
+
+ case ETHERTYPE_ATALK:
+ /*
+ * 802.2-encapsulated ETHERTYPE_ATALK packets are
+ * SNAP packets with an organization code of
+ * 0x080007 (Apple, for Appletalk) and a protocol
+ * type of ETHERTYPE_ATALK (Appletalk).
+ *
+ * XXX - check for an organization code of
+ * encapsulated Ethernet as well?
+ */
+ return gen_snap(0x080007, ETHERTYPE_ATALK, off_linktype);
+
+ default:
+ /*
+ * XXX - we don't have to check for IPX 802.3
+ * here, but should we check for the IPX Ethertype?
+ */
+ if (proto <= ETHERMTU) {
+ /*
+ * This is an LLC SAP value, so check
+ * the DSAP.
+ */
+ return gen_cmp(off_linktype, BPF_B, (bpf_int32)proto);
+ } else {
+ /*
+ * This is an Ethernet type; we assume that it's
+ * unlikely that it'll appear in the right place
+ * at random, and therefore check only the
+ * location that would hold the Ethernet type
+ * in a SNAP frame with an organization code of
+ * 0x000000 (encapsulated Ethernet).
+ *
+ * XXX - if we were to check for the SNAP DSAP and
+ * LSAP, as per XXX, and were also to check for an
+ * organization code of 0x000000 (encapsulated
+ * Ethernet), we'd do
+ *
+ * return gen_snap(0x000000, proto,
+ * off_linktype);
+ *
+ * here; for now, we don't, as per the above.
+ * I don't know whether it's worth the extra CPU
+ * time to do the right check or not.
+ */
+ return gen_cmp(off_linktype+6, BPF_H, (bpf_int32)proto);
+ }
+ }
+}
+
static struct block *
gen_hostop(addr, mask, dir, proto, src_off, dst_off)
bpf_u_int32 addr;
return (b0);
}
+
+struct block *
+gen_atmfield_code(atmfield, jvalue, jtype, reverse)
+ int atmfield;
+ bpf_u_int32 jvalue;
+ bpf_u_int32 jtype;
+ int reverse;
+{
+ struct block *b0;
+
+ switch (atmfield) {
+
+ case A_VPI:
+ if (!is_atm)
+ bpf_error("'vpi' supported only on raw ATM");
+ if (off_vpi == -1)
+ abort();
+ b0 = gen_ncmp(BPF_B, off_vpi, 0xffffffff, (u_int)jtype,
+ (u_int)jvalue, reverse);
+ break;
+
+ case A_VCI:
+ if (!is_atm)
+ bpf_error("'vci' supported only on raw ATM");
+ if (off_vci == -1)
+ abort();
+ b0 = gen_ncmp(BPF_H, off_vci, 0xffffffff, (u_int)jtype,
+ (u_int)jvalue, reverse);
+ break;
+
+ case A_PROTOTYPE:
+ if (off_proto == -1)
+ abort(); /* XXX - this isn't on FreeBSD */
+ b0 = gen_ncmp(BPF_B, off_proto, 0x0f, (u_int)jtype,
+ (u_int)jvalue, reverse);
+ break;
+
+ case A_MSGTYPE:
+ if (off_msg_type == -1)
+ abort();
+ b0 = gen_ncmp(BPF_B, off_msg_type, 0xffffffff,
+ (u_int)jtype, (u_int)jvalue, reverse);
+ break;
+
+ case A_CALLREFTYPE:
+ if (!is_atm)
+ bpf_error("'callref' supported only on raw ATM");
+ if (off_proto == -1)
+ abort();
+ b0 = gen_ncmp(BPF_B, off_proto, 0xffffffff, (u_int)jtype,
+ (u_int)jvalue, reverse);
+ break;
+
+ default:
+ abort();
+ }
+ return b0;
+}
+
+struct block *
+gen_atmtype_abbrev(type)
+ int type;
+{
+ struct block *b0, *b1;
+
+ switch (type) {
+
+ case A_METAC:
+ /* Get all packets in Meta signalling Circuit */
+ if (!is_atm)
+ bpf_error("'metac' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 1, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_BCC:
+ /* Get all packets in Broadcast Circuit*/
+ if (!is_atm)
+ bpf_error("'bcc' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 2, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_OAMF4SC:
+ /* Get all cells in Segment OAM F4 circuit*/
+ if (!is_atm)
+ bpf_error("'oam4sc' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 3, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_OAMF4EC:
+ /* Get all cells in End-to-End OAM F4 Circuit*/
+ if (!is_atm)
+ bpf_error("'oam4ec' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 4, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_SC:
+ /* Get all packets in connection Signalling Circuit */
+ if (!is_atm)
+ bpf_error("'sc' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 5, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_ILMIC:
+ /* Get all packets in ILMI Circuit */
+ if (!is_atm)
+ bpf_error("'ilmic' supported only on raw ATM");
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 16, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_LANE:
+ /* Get all LANE packets */
+ if (!is_atm)
+ bpf_error("'lane' supported only on raw ATM");
+ b1 = gen_atmfield_code(A_PROTOTYPE, PT_LANE, BPF_JEQ, 0);
+ break;
+
+ case A_LLC:
+ /* Get all LLC-encapsulated packets */
+ if (!is_atm)
+ bpf_error("'llc' supported only on raw ATM");
+ b1 = gen_atmfield_code(A_PROTOTYPE, PT_LLC, BPF_JEQ, 0);
+ break;
+
+ default:
+ abort();
+ }
+ return b1;
+}
+
+
+static struct block *
+gen_msg_abbrev(type)
+ int type;
+{
+ struct block *b1;
+
+ /*
+ * Q.2931 signalling protocol messages for handling virtual circuits
+ * establishment and teardown
+ */
+ switch (type) {
+
+ case A_SETUP:
+ b1 = gen_atmfield_code(A_MSGTYPE, SETUP, BPF_JEQ, 0);
+ break;
+
+ case A_CALLPROCEED:
+ b1 = gen_atmfield_code(A_MSGTYPE, CALL_PROCEED, BPF_JEQ, 0);
+ break;
+
+ case A_CONNECT:
+ b1 = gen_atmfield_code(A_MSGTYPE, CONNECT, BPF_JEQ, 0);
+ break;
+
+ case A_CONNECTACK:
+ b1 = gen_atmfield_code(A_MSGTYPE, CONNECT_ACK, BPF_JEQ, 0);
+ break;
+
+ case A_RELEASE:
+ b1 = gen_atmfield_code(A_MSGTYPE, RELEASE, BPF_JEQ, 0);
+ break;
+
+ case A_RELEASE_DONE:
+ b1 = gen_atmfield_code(A_MSGTYPE, RELEASE_DONE, BPF_JEQ, 0);
+ break;
+
+ default:
+ abort();
+ }
+ return b1;
+}
+
+struct block *
+gen_atmmulti_abbrev(type)
+ int type;
+{
+ struct block *b0, *b1;
+
+ switch (type) {
+
+ case A_OAM:
+ if (!is_atm)
+ bpf_error("'oam' supported only on raw ATM");
+ b1 = gen_atmmulti_abbrev(A_OAMF4);
+ break;
+
+ case A_OAMF4:
+ if (!is_atm)
+ bpf_error("'oamf4' supported only on raw ATM");
+ /* OAM F4 type */
+ b0 = gen_atmfield_code(A_VCI, 3, BPF_JEQ, 0);
+ b1 = gen_atmfield_code(A_VCI, 4, BPF_JEQ, 0);
+ gen_or(b0, b1);
+ b0 = gen_atmfield_code(A_VPI, 0, BPF_JEQ, 0);
+ gen_and(b0, b1);
+ break;
+
+ case A_CONNECTMSG:
+ /*
+ * Get Q.2931 signalling messages for switched
+ * virtual connection
+ */
+ if (!is_atm)
+ bpf_error("'connectmsg' supported only on raw ATM");
+ b0 = gen_msg_abbrev(A_SETUP);
+ b1 = gen_msg_abbrev(A_CALLPROCEED);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_CONNECT);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_CONNECTACK);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_RELEASE);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_RELEASE_DONE);
+ gen_or(b0, b1);
+ b0 = gen_atmtype_abbrev(A_SC);
+ gen_and(b0, b1);
+ break;
+
+ case A_METACONNECT:
+ if (!is_atm)
+ bpf_error("'metaconnect' supported only on raw ATM");
+ b0 = gen_msg_abbrev(A_SETUP);
+ b1 = gen_msg_abbrev(A_CALLPROCEED);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_CONNECT);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_RELEASE);
+ gen_or(b0, b1);
+ b0 = gen_msg_abbrev(A_RELEASE_DONE);
+ gen_or(b0, b1);
+ b0 = gen_atmtype_abbrev(A_METAC);
+ gen_and(b0, b1);
+ break;
+
+ default:
+ abort();
+ }
+ return b1;
+}
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
- * @(#) $Header: /tcpdump/master/libpcap/gencode.h,v 1.54 2002-06-11 17:04:45 itojun Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/gencode.h,v 1.55 2002-07-11 09:06:34 guy Exp $ (LBL)
+ */
+
+/*
+ * ATM support:
+ *
+ * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Yen Yen Lim and
+ * North Dakota State University
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
*/
/* Address qualifiers. */
#define Q_DEFAULT 0
#define Q_UNDEF 255
+/* ATM types */
+#define A_METAC 22 /* Meta signalling Circuit */
+#define A_BCC 23 /* Broadcast Circuit */
+#define A_OAMF4SC 24 /* Segment OAM F4 Circuit */
+#define A_OAMF4EC 25 /* End-to-End OAM F4 Circuit */
+#define A_SC 26 /* Signalling Circuit*/
+#define A_ILMIC 27 /* ILMI Circuit */
+#define A_OAM 28 /* OAM cells : F4 only */
+#define A_OAMF4 29 /* OAM F4 cells: Segment + End-to-end */
+#define A_LANE 30 /* LANE traffic */
+#define A_LLC 31 /* LLC-encapsulated traffic */
+
+/* Based on Q.2931 signalling protocol */
+#define A_SETUP 41 /* Setup message */
+#define A_CALLPROCEED 42 /* Call proceeding message */
+#define A_CONNECT 43 /* Connect message */
+#define A_CONNECTACK 44 /* Connect Ack message */
+#define A_RELEASE 45 /* Release message */
+#define A_RELEASE_DONE 46 /* Release message */
+
+/* ATM field types */
+#define A_VPI 51
+#define A_VCI 52
+#define A_PROTOTYPE 53
+#define A_MSGTYPE 54
+#define A_CALLREFTYPE 55
+
+#define A_CONNECTMSG 70 /* returns Q.2931 signalling messages for
+ establishing and destroying switched
+ virtual connection */
+#define A_METACONNECT 71 /* returns Q.2931 signalling messages for
+ establishing and destroying predefined
+ virtual circuits, such as broadcast
+ circuit, oamf4 segment circuit, oamf4
+ end-to-end circuits, ILMI circuits or
+ connection signalling circuit. */
+
struct slist;
struct stmt {
struct block *gen_vlan(int);
+struct block *gen_atmfield_code(int atmfield, bpf_u_int32 jvalue, bpf_u_int32 jtype, int reverse);
+struct block *gen_atmtype_abbrev(int type);
+struct block *gen_atmmulti_abbrev(int type);
+
void bpf_optimize(struct block **);
void bpf_error(const char *, ...)
#if HAVE___ATTRIBUTE__
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/grammar.y,v 1.71 2001-07-03 19:15:48 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/grammar.y,v 1.72 2002-07-11 09:06:35 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
struct arth *a;
struct {
struct qual q;
+ int atmfieldtype;
struct block *b;
} blk;
struct block *rblk;
%type <i> byteop pname pnum relop irelop
%type <blk> and or paren not null prog
%type <rblk> other
+%type <blk> gexpr
+%type <i> atmtype atmmultitype
+%type <blk> atmexpr atmfield atmhead ratmhead
+%type <blk> atmfieldvalue atmvalue atmlistvalue
%token DST SRC HOST GATEWAY
%token NET MASK PORT LESS GREATER PROTO PROTOCHAIN BYTE
%token STP
%token IPX
%token NETBEUI
+%token LANE LLC METAC BCC SC ILMIC OAMF4EC OAMF4SC
+%token OAM OAMF4 CONNECTMSG METACONNECT
+%token VPI VCI
%type <s> ID
%type <e> EID
%left '*' '/'
%nonassoc UMINUS
%%
-prog: null expr
+prog: null gexpr
{
finish_parse($2.b);
}
;
null: /* null */ { $$.q = qerr; }
;
+gexpr: expr
+ | atmexpr
+ ;
expr: term
| expr and term { gen_and($1.b, $3.b); $$ = $3; }
| expr and id { gen_and($1.b, $3.b); $$ = $3; }
pnum: NUM
| paren pnum ')' { $$ = $2; }
;
+atmexpr: atmhead
+ | atmexpr and atmhead { gen_and($1.b, $3.b); $$ = $3; }
+ | atmexpr or atmhead { gen_or($1.b, $3.b); $$ = $3; }
+ ;
+atmhead: ratmhead
+ | not atmhead { gen_not($2.b); $$ = $2; }
+ ;
+ratmhead: atmtype { $$.b = gen_atmtype_abbrev($1); $$.q = qerr; }
+ | atmmultitype { $$.b = gen_atmmulti_abbrev($1); $$.q = qerr; }
+ | atmfield atmvalue { $$.b = $2.b; }
+ | paren atmexpr ')' { $$.b = $2.b; $$.q = qerr; }
+ ;
+atmtype: LANE { $$ = A_LANE; }
+ | LLC { $$ = A_LLC; }
+ | METAC { $$ = A_METAC; }
+ | BCC { $$ = A_BCC; }
+ | OAMF4EC { $$ = A_OAMF4EC; }
+ | OAMF4SC { $$ = A_OAMF4SC; }
+ | SC { $$ = A_SC; }
+ | ILMIC { $$ = A_ILMIC; }
+ ;
+atmmultitype: OAM { $$ = A_OAM; }
+ | OAMF4 { $$ = A_OAMF4; }
+ | CONNECTMSG { $$ = A_CONNECTMSG; }
+ | METACONNECT { $$ = A_METACONNECT; }
+ ;
+ /* ATM field types quantifier */
+atmfield: VPI { $$.atmfieldtype = A_VPI; }
+ | VCI { $$.atmfieldtype = A_VCI; }
+ ;
+atmvalue: atmfieldvalue
+ | relop NUM { $$.b = gen_atmfield_code($<blk>0.atmfieldtype, (u_int)$2, (u_int)$1, 0); }
+ | irelop NUM { $$.b = gen_atmfield_code($<blk>0.atmfieldtype, (u_int)$2, (u_int)$1, 1); }
+ | paren atmlistvalue ')' { $$.b = $2.b; $$.q = qerr; }
+ ;
+atmfieldvalue: NUM {
+ $$.atmfieldtype = $<blk>0.atmfieldtype;
+ if ($$.atmfieldtype == A_VPI ||
+ $$.atmfieldtype == A_VCI)
+ $$.b = gen_atmfield_code($$.atmfieldtype, (u_int) $1, BPF_JEQ, 0);
+ }
+ ;
+atmlistvalue: atmfieldvalue
+ | atmlistvalue or atmfieldvalue { gen_or($1.b, $3.b); $$ = $3; }
+ ;
%%
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/inet.c,v 1.47 2002-06-11 17:04:45 itojun Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/inet.c,v 1.48 2002-07-11 09:06:35 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#endif /* HAVE_SOCKADDR_SA_LEN */
#endif /* SA_LEN */
-/*
- * Description string for the "any" device.
- */
-static const char any_descr[] = "Pseudo-device that captures on all interfaces";
-
static struct sockaddr *
dup_sockaddr(struct sockaddr *sa)
{
return (0);
}
-static int
+int
pcap_add_if(pcap_if_t **devlist, char *name, u_int flags,
const char *description, char *errbuf)
{
if (ret != -1) {
/*
- * We haven't had any errors yet; add the "any" device,
- * if we can open it.
+ * We haven't had any errors yet; do any platform-specific
+ * operations to add devices.
*/
- if (pcap_add_if(&devlist, "any", 0, any_descr, errbuf) < 0)
+ if (pcap_platform_finddevs(&devlist, errbuf) < 0)
ret = -1;
}
if (ret != -1) {
/*
- * We haven't had any errors yet; add the "any" device,
- * if we can open it.
+ * We haven't had any errors yet; do any platform-specific
+ * operations to add devices.
*/
- if (pcap_add_if(&devlist, "any", 0, any_descr, errbuf) < 0) {
- /*
- * Oops, we had a fatal error.
- */
+ if (pcap_platform_finddevs(&devlist, errbuf) < 0)
ret = -1;
- }
}
if (ret == -1) {
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.50 2002-06-07 04:17:15 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.51 2002-07-11 09:06:36 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
*/
/*
- * Packet capture routine for dlpi under SunOS 5
+ * Packet capture routine for DLPI under SunOS 5, HP-UX 9/10/11, and AIX.
*
* Notes:
*
* length results in data being left of the front of the packet.
*
* - It might be desirable to use pfmod(7) to filter packets in the
- * kernel.
+ * kernel when possible.
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.78 2002-06-11 17:04:46 itojun Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.79 2002-07-11 09:06:37 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (n);
}
+#ifndef DL_IPATM
+#define DL_IPATM 0x12 /* ATM Classical IP interface */
+#endif
+
+#ifdef HAVE_SOLARIS
+/*
+ * For SunATM.
+ */
+#ifndef A_GET_UNITS
+#define A_GET_UNITS (('A'<<8)|118)
+#endif /* A_GET_UNITS */
+#ifndef A_PROMISCON_REQ
+#define A_PROMISCON_REQ (('A'<<8)|121)
+#endif /* A_PROMISCON_REQ */
+#endif /* HAVE_SOLARIS */
+
pcap_t *
pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
{
register char *cp;
register pcap_t *p;
int ppa;
+#ifdef HAVE_SOLARIS
+ int isatm = 0;
+#endif
register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
bpf_u_int32 ss, flag;
dlinfoack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
+#ifdef HAVE_SOLARIS
+ if (infop->dl_mac_type == DL_IPATM)
+ isatm = 1;
+#endif
if (infop->dl_provider_style == DL_STYLE2 &&
(dlattachreq(p->fd, ppa, ebuf) < 0 ||
dlokack(p->fd, "attach", (char *)buf, ebuf) < 0))
goto bad;
#endif
+#ifdef HAVE_SOLARIS
+ if (isatm) {
+ /*
+ ** Have to turn on some special ATM promiscuous mode
+ ** for SunATM.
+ ** Do *NOT* turn regular promiscuous mode on; it doesn't
+ ** help, and may break things.
+ */
+ if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) {
+ snprintf(ebuf, PCAP_ERRBUF_SIZE, "A_PROMISCON_REQ: %s",
+ pcap_strerror(errno));
+ goto bad;
+ }
+ } else
+#endif
if (promisc) {
/*
** Enable promiscuous
}
/*
** Try to enable sap (when not in promiscuous mode when using
- ** using HP-UX and never under SINIX)
+ ** using HP-UX, when not doing SunATM on Solaris, and never
+ ** under SINIX)
*/
#ifndef sinix
if (
#ifdef __hpux
!promisc &&
+#endif
+#ifdef HAVE_SOLARIS
+ !isatm &&
#endif
(dlpromisconreq(p->fd, DL_PROMISC_SAP, ebuf) < 0 ||
dlokack(p->fd, "promisc_sap", (char *)buf, ebuf) < 0)) {
p->offset = 2;
break;
+#ifdef HAVE_SOLARIS
+ case DL_IPATM:
+ p->linktype = DLT_SUNATM;
+ p->offset = 0; /* works for LANE and LLC encapsulation */
+ break;
+#endif
+
default:
snprintf(ebuf, PCAP_ERRBUF_SIZE, "unknown mac type %lu",
(unsigned long)infop->dl_mac_type);
#ifdef DLIOCRAW
/*
- ** This is a non standard SunOS hack to get the ethernet header.
+ ** This is a non standard SunOS hack to get the full raw link-layer
+ ** header.
*/
if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
return (cp);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+#ifdef HAVE_SOLARIS
+ int fd;
+ union {
+ u_int nunits;
+ char pad[516]; /* XXX - must be at least 513; is 516
+ in "atmgetunits" */
+ } buf;
+ char baname[2+1+1];
+ u_int i;
+
+ /*
+ * We may have to do special magic to get ATM devices.
+ */
+ if ((fd = open("/dev/ba", O_RDWR)) < 0) {
+ /*
+ * We couldn't open the "ba" device.
+ * For now, just give up; perhaps we should
+ * return an error if the problem is neither
+ * a "that device doesn't exist" error (ENOENT,
+ * ENXIO, etc.) or a "you're not allowed to do
+ * that" error (EPERM, EACCES).
+ */
+ return (0);
+ }
+
+ if (strioctl(fd, A_GET_UNITS, sizeof(buf), (char *)&buf) < 0) {
+ snprintf(errbuf, PCAP_ERRBUF_SIZE, "A_GET_UNITS: %s",
+ pcap_strerror(errno));
+ return (-1);
+ }
+ for (i = 0; i < buf.nunits; i++) {
+ snprintf(baname, sizeof baname, "ba%u", i);
+ if (pcap_add_if(alldevsp, baname, 0, NULL, errbuf) < 0)
+ return (-1);
+ }
+#endif
+
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- * @(#) $Header: /tcpdump/master/libpcap/pcap-int.h,v 1.34 2002-06-11 17:04:46 itojun Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/pcap-int.h,v 1.35 2002-07-11 09:06:38 guy Exp $ (LBL)
*/
#ifndef pcap_int_h
strlen((y)))
#endif
+/*
+ * Internal interfaces for "pcap_findalldevs()".
+ *
+ * "pcap_platform_finddevs()" is a platform-dependent routine to
+ * add devices not found by the "standard" mechanisms (SIOCGIFCONF,
+ * "getifaddrs()", etc..
+ *
+ * "pcap_add_if()" adds an interface to the list of interfaces.
+ */
+int pcap_platform_finddevs(pcap_if_t **, char *);
+int pcap_add_if(pcap_if_t **, char *, u_int, const char *, char *);
+
+
#ifdef linux
void pcap_close_linux(pcap_t *);
#endif
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.82 2002-07-06 21:22:35 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.83 2002-07-11 09:06:38 guy Exp $ (LBL)";
#endif
/*
return 0;
}
+/*
+ * Description string for the "any" device.
+ */
+static const char any_descr[] = "Pseudo-device that captures on all interfaces";
+
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ if (pcap_add_if(&devlist, "any", 0, any_descr, errbuf) < 0)
+ return (-1);
+
+ return (0);
+}
+
/*
* Attach the given BPF code to the packet capture device.
*/
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-nit.c,v 1.41 2001-12-10 07:14:18 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-nit.c,v 1.42 2002-07-11 09:06:39 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-null.c,v 1.13 2000-10-28 00:01:29 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-null.c,v 1.14 2002-07-11 09:06:41 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.66 2002-06-11 17:04:47 itojun Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.67 2002-07-11 09:06:42 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-snit.c,v 1.56 2001-12-10 07:14:20 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-snit.c,v 1.57 2002-07-11 09:06:43 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
*/
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-snoop.c,v 1.35 2002-03-08 11:10:40 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-snoop.c,v 1.36 2002-07-11 09:06:43 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
return (NULL);
}
+int
+pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
+{
+ return (0);
+}
+
int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
-.\" @(#) $Header: /tcpdump/master/libpcap/Attic/pcap.3,v 1.33 2002-07-11 08:12:34 guy Exp $
+.\" @(#) $Header: /tcpdump/master/libpcap/Attic/pcap.3,v 1.34 2002-07-11 09:06:44 guy Exp $
.\"
.\" Copyright (c) 1994, 1996, 1997
.\" The Regents of the University of California. All rights reserved.
.TP 5
.B DLT_LTALK
Apple LocalTalk; the packet begins with an AppleTalk LLAP header
+.TP 5
+.B DLT_SUNATM
+SunATM devices; the link layer header contains, in order:
+.RS 10
+.LP
+a 1-byte flag field, containing a direction flag in the uppermost bit,
+which is set for packets transmitted by the machine and clear for
+packets received by the machine, and a 4-byte traffic type in the
+low-order 4 bits, which is one of:
+.RS 5
+.TP 5
+0
+raw traffic
+.TP 5
+1
+LANE traffic
+.TP 5
+2
+LLC-encapsulated traffic
+.TP 5
+3
+MARS traffic
+.TP 5
+4
+IFMP traffic
+.TP 5
+5
+ILMI traffic
+.TP 5
+6
+Q.2931 traffic
+.RE
+.LP
+a 1-byte VPI value;
+.LP
+a 2-byte VCI field, in network byte order.
.RE
.PP
.B pcap_snapshot()
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.63 2002-06-07 04:31:12 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.64 2002-07-11 09:06:46 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#define LINKTYPE_CISCO_IOS 118 /* For Cisco-internal use */
#define LINKTYPE_PRISM_HEADER 119 /* 802.11+Prism II monitor mode */
#define LINKTYPE_AIRONET_HEADER 120 /* FreeBSD Aironet driver stuff */
+#define LINKTYPE_SUNATM 123 /* Solaris+SunATM */
/*
* These types are reserved for future use.
#ifndef lint
static const char rcsid[] =
- "@(#) $Header: /tcpdump/master/libpcap/scanner.l,v 1.85 2002-06-29 07:44:38 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/scanner.l,v 1.86 2002-07-11 09:06:46 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
vlan return VLAN;
+lane return LANE;
+llc return LLC;
+metac return METAC;
+bcc return BCC;
+oam return OAM;
+oamf4 return OAMF4;
+oamf4ec return OAMF4EC;
+oamf4sc return OAMF4SC;
+sc return SC;
+ilmic return ILMIC;
+vpi return VPI;
+vci return VCI;
+connectmsg return CONNECTMSG;
+metaconnect return METACONNECT;
+
[ \n\t] ;
[+\-*/:\[\]!<>()&|=] return yytext[0];
">=" return GEQ;
--- /dev/null
+/*
+ * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Yen Yen Lim and
+ North Dakota State University
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/sunatmpos.h,v 1.1 2002-07-11 09:06:47 guy Exp $ (LBL)
+ */
+
+/* SunATM header for ATM packet */
+#define SUNATM_DIR_POS 0
+#define SUNATM_VPI_POS 1
+#define SUNATM_VCI_POS 2
+#define SUNATM_PKT_BEGIN_POS 4 /* Start of ATM packet */
+
+/* Protocol type values in the bottom for bits of the byte at SUNATM_DIR_POS. */
+#define PT_LANE 0x01 /* LANE */
+#define PT_LLC 0x02 /* LLC encapsulation */
+#define PT_ILMI 0x05 /* ILMI */
+#define PT_QSAAL 0x06 /* Q.SAAL */
projects / libpcap / commitdiff
