optimize.c
packaging/pcap.spec
packaging/pcap.spec.in
+pcap/bpf.h
+pcap/namedb.h
+pcap/pcap.h
+pcap/sll.h
+pcap/usb.h
pcap-bpf.c
pcap-bpf.h
pcap-dag.c
pcap-stdinc.h
pcap-snit.c
pcap-snoop.c
+pcap-usb-linux.c
pcap-win32.c
pcap.3
pcap.c
ppp.h
savefile.c
scanner.l
-sll.h
sunatmpos.h
Win32/Include/Gnuc.h
Win32/Include/addrinfo.h
-@(#) $Header: /tcpdump/master/libpcap/INSTALL.txt,v 1.15 2005-08-10 06:19:06 guy Exp $ (LBL)
+@(#) $Header: /tcpdump/master/libpcap/INSTALL.txt,v 1.16 2006-10-04 18:09:22 guy Exp $ (LBL)
To build libpcap, run "./configure" (a shell script). The configure
script will determine your system attributes and generate an
net - symlink to bpf/net
optimize.c - BPF optimization routines
packaging - packaging information for building libpcap RPMs
+pcap/pcap-bpf.h - BPF definitions
+pcap/namedb.h - public libpcap name database definitions
+pcap/pcap.h - public libpcap definitions
+pcap/sll.h - public definition of DLT_LINUX_SLL header
+pcap/usb.h - public definition of DLT_USB headeer
pcap-bpf.c - BSD Packet Filter support
-pcap-bpf.h - BPF definitions
+pcap-bpf.h - header for backwards compatibility
pcap-dag.c - Endace DAG device capture support
pcap-dag.h - Endace DAG device capture support
pcap-dlpi.c - Data Link Provider Interface support
pcap-enet.c - enet support
pcap-int.h - internal libpcap definitions
pcap-linux.c - Linux packet socket support
-pcap-namedb.h - public libpcap name database definitions
+pcap-namedb.h - header for backwards compatibility
pcap-nit.c - SunOS Network Interface Tap support
pcap-nit.h - SunOS Network Interface Tap definitions
pcap-null.c - dummy monitor support (allows offline use of libpcap)
pcap-pf.c - Ultrix and Digital/Tru64 UNIX Packet Filter support
pcap-pf.h - Ultrix and Digital/Tru64 UNIX Packet Filter definitions
-pcap-septel.c - INTEL/Septel device capture support
-pcap-septel.h - INTEL/Septel device capture support
+pcap-septel.c - Intel/Septel device capture support
+pcap-septel.h - Intel/Septel device capture support
pcap-stdinc.h - includes and #defines for compiling on Win32 systems
pcap-snit.c - SunOS 4.x STREAMS-based Network Interface Tap support
pcap-snoop.c - IRIX Snoop network monitoring support
+pcap-usb-linux.c - USB capture support for Linux
pcap-win32.c - WinPcap capture support
pcap.3 - manual entry
pcap.c - pcap utility routines
-pcap.h - public libpcap definitions
+pcap.h - header for backwards compatibility
pf.h - OpenBSD DLT_PFLOG definitions
ppp.h - Point to Point Protocol definitions
-rawss7.h - information on DLT_ types for SS7
savefile.c - offline support
scanner.l - filter string scanner
-sll.h - definitions for Linux cooked mode fake link-layer header
sunatmpos.h - definitions for SunATM capturing
Win32 - headers and routines for building on Win32 systems
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
-# @(#) $Header: /tcpdump/master/libpcap/Makefile.in,v 1.103 2006-10-04 16:50:33 guy Exp $ (LBL)
+# @(#) $Header: /tcpdump/master/libpcap/Makefile.in,v 1.104 2006-10-04 18:09:22 guy Exp $ (LBL)
#
# Various configurable paths (remember to edit Makefile.in, not Makefile)
$(RANLIB) $(DESTDIR)$(libdir)/libpcap.a
[ -d $(DESTDIR)$(includedir) ] || \
(mkdir -p $(DESTDIR)$(includedir); chmod 755 $(DESTDIR)$(includedir))
+ [ -d $(DESTDIR)$(includedir)/pcap ] || \
+ (mkdir -p $(DESTDIR)$(includedir)/pcap; chmod 755 $(DESTDIR)$(includedir)/pcap)
+ $(INSTALL_DATA) $(srcdir)/pcap/pcap.h \
+ $(DESTDIR)$(includedir)/pcap/pcap.h
+ $(INSTALL_DATA) $(srcdir)/pcap/bpf.h \
+ $(DESTDIR)$(includedir)/pcap/bpf.h
+ $(INSTALL_DATA) $(srcdir)/pcap/namedb.h \
+ $(DESTDIR)$(includedir)/pcap/namedb.h
+ $(INSTALL_DATA) $(srcdir)/pcap/sll.h \
+ $(DESTDIR)$(includedir)/pcap/sll.h
+ $(INSTALL_DATA) $(srcdir)/pcap/usb.h \
+ $(DESTDIR)$(includedir)/pcap/usb.h
$(INSTALL_DATA) $(srcdir)/pcap.h $(DESTDIR)$(includedir)/pcap.h
$(INSTALL_DATA) $(srcdir)/pcap-bpf.h \
$(DESTDIR)$(includedir)/pcap-bpf.h
$(INSTALL_DATA) $(srcdir)/pcap-namedb.h \
$(DESTDIR)$(includedir)/pcap-namedb.h
- $(INSTALL_DATA) $(srcdir)/pcap-usb.h \
- $(DESTDIR)$(includedir)/pcap-usb.h
[ -d $(DESTDIR)$(mandir)/man3 ] || \
(mkdir -p $(DESTDIR)$(mandir)/man3; chmod 755 $(DESTDIR)$(mandir)/man3)
$(INSTALL_DATA) $(srcdir)/pcap.3 \
uninstall:
rm -f $(DESTDIR)$(libdir)/libpcap.a
+ rm -f $(DESTDIR)$(includedir)/pcap/pcap.h
+ rm -f $(DESTDIR)$(includedir)/pcap/bpf.h
+ rm -f $(DESTDIR)$(includedir)/pcap/namedb.h
+ rm -f $(DESTDIR)$(includedir)/pcap/sll.h
+ rm -f $(DESTDIR)$(includedir)/pcap/usb.h
+ -rmdir $(DESTDIR)$(includedir)/pcap
rm -f $(DESTDIR)$(includedir)/pcap.h
rm -f $(DESTDIR)$(includedir)/pcap-bpf.h
rm -f $(DESTDIR)$(includedir)/pcap-namedb.h
#if !(defined(lint) || defined(KERNEL) || defined(_KERNEL))
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/bpf/net/bpf_filter.c,v 1.44 2003-11-15 23:24:07 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/bpf/net/bpf_filter.c,v 1.45 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#endif /* WIN32 */
-#include <pcap-bpf.h>
+#include <pcap/bpf.h>
#if !defined(KERNEL) && !defined(_KERNEL)
#include <stdlib.h>
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/etherent.c,v 1.22 2003-11-15 23:23:57 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/etherent.c,v 1.23 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "pcap-int.h"
-#include <pcap-namedb.h>
+#include <pcap/namedb.h>
#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
*/
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/gencode.c,v 1.271 2006-10-04 16:47:46 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/gencode.c,v 1.272 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "atmuni31.h"
#include "sunatmpos.h"
#include "ppp.h"
-#include "sll.h"
+#include "pcap/sll.h"
#include "arcnet.h"
#include "pf.h"
#ifndef offsetof
#include <netdb.h> /* for "struct addrinfo" */
#endif /* WIN32 */
#endif /*INET6*/
-#include <pcap-namedb.h>
+#include <pcap/namedb.h>
#define ETHERMTU 1500
*/
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/grammar.y,v 1.92 2006-05-16 08:30:05 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/grammar.y,v 1.93 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "gencode.h"
#include "pf.h"
-#include <pcap-namedb.h>
+#include <pcap/namedb.h>
#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/nametoaddr.c,v 1.80 2005-04-20 11:12:36 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/nametoaddr.c,v 1.81 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "pcap-int.h"
#include "gencode.h"
-#include <pcap-namedb.h>
+#include <pcap/namedb.h>
#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
*/
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.95 2006-01-22 05:28:12 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.96 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#ifdef _AIX
/*
- * Make "pcap.h" not include "pcap-bpf.h"; we are going to include the
+ * Make "pcap.h" not include "pcap/bpf.h"; we are going to include the
* native OS version, as we need "struct bpf_config" from it.
*/
#define PCAP_DONT_INCLUDE_PCAP_BPF_H
}
/*
- * We include the OS's <net/bpf.h>, not our "pcap-bpf.h", so we probably
+ * We include the OS's <net/bpf.h>, not our "pcap/bpf.h", so we probably
* don't get DLT_DOCSIS defined.
*/
#ifndef DLT_DOCSIS
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
- *
- * @(#)bpf.h 7.1 (Berkeley) 5/7/91
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap-bpf.h,v 1.47 2006-10-03 00:11:46 guy Exp $ (LBL)
- */
-
-/*
- * This is libpcap's cut-down version of bpf.h; it includes only
- * the stuff needed for the code generator and the userland BPF
- * interpreter, and the libpcap APIs for setting filters, etc..
- *
- * "pcap-bpf.c" will include the native OS version, as it deals with
- * the OS's BPF implementation.
- *
- * XXX - should this all just be moved to "pcap.h"?
- */
-
-#ifndef BPF_MAJOR_VERSION
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* BSD style release date */
-#define BPF_RELEASE 199606
-
-#ifdef MSDOS /* must be 32-bit */
-typedef long bpf_int32;
-typedef unsigned long bpf_u_int32;
-#else
-typedef int bpf_int32;
-typedef u_int bpf_u_int32;
-#endif
-
-/*
- * Alignment macros. BPF_WORDALIGN rounds up to the next
- * even multiple of BPF_ALIGNMENT.
- */
-#ifndef __NetBSD__
-#define BPF_ALIGNMENT sizeof(bpf_int32)
-#else
-#define BPF_ALIGNMENT sizeof(long)
-#endif
-#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
-
-#define BPF_MAXINSNS 512
-#define BPF_MAXBUFSIZE 0x8000
-#define BPF_MINBUFSIZE 32
-
-/*
- * Structure for "pcap_compile()", "pcap_setfilter()", etc..
- */
-struct bpf_program {
- u_int bf_len;
- struct bpf_insn *bf_insns;
-};
-
-/*
- * Struct return by BIOCVERSION. This represents the version number of
- * the filter language described by the instruction encodings below.
- * bpf understands a program iff kernel_major == filter_major &&
- * kernel_minor >= filter_minor, that is, if the value returned by the
- * running kernel has the same major number and a minor number equal
- * equal to or less than the filter being downloaded. Otherwise, the
- * results are undefined, meaning an error may be returned or packets
- * may be accepted haphazardly.
- * It has nothing to do with the source code version.
- */
-struct bpf_version {
- u_short bv_major;
- u_short bv_minor;
-};
-/* Current version number of filter architecture. */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * Data-link level type codes.
- *
- * Do *NOT* add new values to this list without asking
- * risk of using a value that's already being used for some other purpose,
- * and of having tools that read libpcap-format captures not being able
- * to handle captures with your new DLT_ value, with no hope that they
- * will ever be changed to do so (as that would destroy their ability
- * to read captures using that value for that other purpose).
- */
-
-/*
- * These are the types that are the same on all platforms, and that
- * have been defined by <net/bpf.h> for ages.
- */
-#define DLT_NULL 0 /* BSD loopback encapsulation */
-#define DLT_EN10MB 1 /* Ethernet (10Mb) */
-#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */
-#define DLT_AX25 3 /* Amateur Radio AX.25 */
-#define DLT_PRONET 4 /* Proteon ProNET Token Ring */
-#define DLT_CHAOS 5 /* Chaos */
-#define DLT_IEEE802 6 /* IEEE 802 Networks */
-#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */
-#define DLT_SLIP 8 /* Serial Line IP */
-#define DLT_PPP 9 /* Point-to-point Protocol */
-#define DLT_FDDI 10 /* FDDI */
-
-/*
- * These are types that are different on some platforms, and that
- * have been defined by <net/bpf.h> for ages. We use #ifdefs to
- * detect the BSDs that define them differently from the traditional
- * libpcap <net/bpf.h>
- *
- * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
- * but I don't know what the right #define is for BSD/OS.
- */
-#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */
-
-#ifdef __OpenBSD__
-#define DLT_RAW 14 /* raw IP */
-#else
-#define DLT_RAW 12 /* raw IP */
-#endif
-
-/*
- * Given that the only OS that currently generates BSD/OS SLIP or PPP
- * is, well, BSD/OS, arguably everybody should have chosen its values
- * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they
- * didn't. So it goes.
- */
-#if defined(__NetBSD__) || defined(__FreeBSD__)
-#ifndef DLT_SLIP_BSDOS
-#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */
-#endif
-#else
-#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */
-#endif
-
-/*
- * 17 is used for DLT_OLD_PFLOG in OpenBSD;
- * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below.
- * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else.
- */
-
-#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */
-
-/*
- * Apparently Redback uses this for its SmartEdge 400/800. I hope
- * nobody else decided to use it, too.
- */
-#define DLT_REDBACK_SMARTEDGE 32
-
-/*
- * These values are defined by NetBSD; other platforms should refrain from
- * using them for other purposes, so that NetBSD savefiles with link
- * types of 50 or 51 can be read as this type on all platforms.
- */
-#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */
-#define DLT_PPP_ETHER 51 /* PPP over Ethernet */
-
-/*
- * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses
- * a link-layer type of 99 for the tcpdump it supplies. The link-layer
- * header has 6 bytes of unknown data, something that appears to be an
- * Ethernet type, and 36 bytes that appear to be 0 in at least one capture
- * I've seen.
- */
-#define DLT_SYMANTEC_FIREWALL 99
-
-/*
- * Values between 100 and 103 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * This value was defined by libpcap 0.5; platforms that have defined
- * it with a different value should define it here with that value -
- * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
- * whatever value that happens to be, so programs will correctly
- * handle files with that link type regardless of the value of
- * DLT_C_HDLC.
- *
- * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
- * compatibility with programs written for BSD/OS.
- *
- * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
- * for source compatibility with programs written for libpcap 0.5.
- */
-#define DLT_C_HDLC 104 /* Cisco HDLC */
-#define DLT_CHDLC DLT_C_HDLC
-
-#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */
-
-/*
- * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW,
- * except when it isn't. (I.e., sometimes it's just raw IP, and
- * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL,
- * so that we don't have to worry about the link-layer header.)
- */
-
-/*
- * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
- * with other values.
- * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
- * (DLCI, etc.).
- */
-#define DLT_FRELAY 107
-
-/*
- * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
- * that the AF_ type in the link-layer header is in network byte order.
- *
- * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
- * define it as 108 here. If OpenBSD picks up this file, it should
- * define DLT_LOOP as 12 in its version, as per the comment above -
- * and should not use 108 as a DLT_ value.
- */
-#define DLT_LOOP 108
-
-/*
- * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
- * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
- * than OpenBSD.
- */
-#ifdef __OpenBSD__
-#define DLT_ENC 13
-#else
-#define DLT_ENC 109
-#endif
-
-/*
- * Values between 110 and 112 are reserved for use in capture file headers
- * as link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ types
- * other than the corresponding DLT_ types.
- */
-
-/*
- * This is for Linux cooked sockets.
- */
-#define DLT_LINUX_SLL 113
-
-/*
- * Apple LocalTalk hardware.
- */
-#define DLT_LTALK 114
-
-/*
- * Acorn Econet.
- */
-#define DLT_ECONET 115
-
-/*
- * Reserved for use with OpenBSD ipfilter.
- */
-#define DLT_IPFILTER 116
-
-/*
- * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023
- * in SuSE 6.3, so we can't use 17 for it in capture-file headers.
- *
- * XXX: is there a conflict with DLT_PFSYNC 18 as well?
- */
-#ifdef __OpenBSD__
-#define DLT_OLD_PFLOG 17
-#define DLT_PFSYNC 18
-#endif
-#define DLT_PFLOG 117
-
-/*
- * Registered for Cisco-internal use.
- */
-#define DLT_CISCO_IOS 118
-
-/*
- * For 802.11 cards using the Prism II chips, with a link-layer
- * header including Prism monitor mode information plus an 802.11
- * header.
- */
-#define DLT_PRISM_HEADER 119
-
-/*
- * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
- * (see Doug Ambrisko's FreeBSD patches).
- */
-#define DLT_AIRONET_HEADER 120
-
-/*
- * Reserved for Siemens HiPath HDLC.
- */
-#define DLT_HHDLC 121
-
-/*
- * This is for RFC 2625 IP-over-Fibre Channel.
- *
- * This is not for use with raw Fibre Channel, where the link-layer
- * header starts with a Fibre Channel frame header; it's for IP-over-FC,
- * where the link-layer header starts with an RFC 2625 Network_Header
- * field.
- */
-#define DLT_IP_OVER_FC 122
-
-/*
- * This is for Full Frontal ATM on Solaris with SunATM, with a
- * pseudo-header followed by an AALn PDU.
- *
- * There may be other forms of Full Frontal ATM on other OSes,
- * with different pseudo-headers.
- *
- * If ATM software returns a pseudo-header with VPI/VCI information
- * (and, ideally, packet type information, e.g. signalling, ILMI,
- * LANE, LLC-multiplexed traffic, etc.), it should not use
- * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
- * and the like don't have to infer the presence or absence of a
- * pseudo-header and the form of the pseudo-header.
- */
-#define DLT_SUNATM 123 /* Solaris+SunATM */
-
-/*
- * for private use.
- */
-#define DLT_RIO 124 /* RapidIO */
-#define DLT_PCI_EXP 125 /* PCI Express */
-#define DLT_AURORA 126 /* Xilinx Aurora link layer */
-
-/*
- * Header for 802.11 plus a number of bits of link-layer information
- * including radio information, used by some recent BSD drivers as
- * well as the madwifi Atheros driver for Linux.
- */
-#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */
-
-/*
- * Reserved for the TZSP encapsulation, as per request from
- * TZSP is a generic encapsulation for any other link type,
- * which includes a means to include meta-information
- * with the packet, e.g. signal strength and channel
- * for 802.11 packets.
- */
-#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */
-
-/*
- * BSD's ARCNET headers have the source host, destination host,
- * and type at the beginning of the packet; that's what's handed
- * up to userland via BPF.
- *
- * Linux's ARCNET headers, however, have a 2-byte offset field
- * between the host IDs and the type; that's what's handed up
- * to userland via PF_PACKET sockets.
- *
- * We therefore have to have separate DLT_ values for them.
- */
-#define DLT_ARCNET_LINUX 129 /* ARCNET */
-
-/*
- * Juniper-private data link types, as per request from
- * for passing on chassis-internal metainformation such as
- * QOS profiles, etc..
- */
-#define DLT_JUNIPER_MLPPP 130
-#define DLT_JUNIPER_MLFR 131
-#define DLT_JUNIPER_ES 132
-#define DLT_JUNIPER_GGSN 133
-#define DLT_JUNIPER_MFR 134
-#define DLT_JUNIPER_ATM2 135
-#define DLT_JUNIPER_SERVICES 136
-#define DLT_JUNIPER_ATM1 137
-
-/*
- * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
- * header:
- *
- * #define FIREWIRE_EUI64_LEN 8
- * struct firewire_header {
- * u_char firewire_dhost[FIREWIRE_EUI64_LEN];
- * u_char firewire_shost[FIREWIRE_EUI64_LEN];
- * u_short firewire_type;
- * };
- *
- * with "firewire_type" being an Ethernet type value, rather than,
- * for example, raw GASP frames being handed up.
- */
-#define DLT_APPLE_IP_OVER_IEEE1394 138
-
-/*
- * Various SS7 encapsulations, as per a request from Jeff Morriss
- * <jeff.morriss[AT]ulticom.com> and subsequent discussions.
- */
-#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */
-#define DLT_MTP2 140 /* MTP2, without pseudo-header */
-#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */
-#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */
-
-/*
- * DOCSIS MAC frames.
- */
-#define DLT_DOCSIS 143
-
-/*
- * Linux-IrDA packets. Protocol defined at http://www.irda.org.
- * Those packets include IrLAP headers and above (IrLMP...), but
- * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
- * framing can be handled by the hardware and depend on the bitrate.
- * This is exactly the format you would get capturing on a Linux-IrDA
- * interface (irdaX), but not on a raw serial port.
- * Note the capture is done in "Linux-cooked" mode, so each packet include
- * a fake packet header (struct sll_header). This is because IrDA packet
- * decoding is dependant on the direction of the packet (incomming or
- * outgoing).
- * When/if other platform implement IrDA capture, we may revisit the
- * issue and define a real DLT_IRDA...
- * Jean II
- */
-#define DLT_LINUX_IRDA 144
-
-/*
- * Reserved for IBM SP switch and IBM Next Federation switch.
- */
-#define DLT_IBM_SP 145
-#define DLT_IBM_SN 146
-
-/*
- * Reserved for private use. If you have some link-layer header type
- * that you want to use within your organization, with the capture files
- * using that link-layer header type not ever be sent outside your
- * organization, you can use these values.
- *
- * No libpcap release will use these for any purpose, nor will any
- * tcpdump release use them, either.
- *
- * Do *NOT* use these in capture files that you expect anybody not using
- * your private versions of capture-file-reading tools to read; in
- * particular, do *NOT* use them in products, otherwise you may find that
- * people won't be able to use tcpdump, or snort, or Ethereal, or... to
- * read capture files from your firewall/intrusion detection/traffic
- * monitoring/etc. appliance, or whatever product uses that DLT_ value,
- * and you may also find that the developers of those applications will
- * not accept patches to let them read those files.
- *
- * Also, do not use them if somebody might send you a capture using them
- * for *their* private type and tools using them for *your* private type
- * would have to read them.
- *
- * as per the comment above, and use the type you're given.
- */
-#define DLT_USER0 147
-#define DLT_USER1 148
-#define DLT_USER2 149
-#define DLT_USER3 150
-#define DLT_USER4 151
-#define DLT_USER5 152
-#define DLT_USER6 153
-#define DLT_USER7 154
-#define DLT_USER8 155
-#define DLT_USER9 156
-#define DLT_USER10 157
-#define DLT_USER11 158
-#define DLT_USER12 159
-#define DLT_USER13 160
-#define DLT_USER14 161
-#define DLT_USER15 162
-
-/*
- * For future use with 802.11 captures - defined by AbsoluteValue
- * Systems to store a number of bits of link-layer information
- * including radio information:
- *
- * http://www.shaftnet.org/~pizza/software/capturefrm.txt
- *
- * but it might be used by some non-AVS drivers now or in the
- * future.
- */
-#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */
-
-/*
- * Juniper-private data link type, as per request from
- * for passing on chassis-internal metainformation such as
- * QOS profiles, etc..
- */
-#define DLT_JUNIPER_MONITOR 164
-
-/*
- * Reserved for BACnet MS/TP.
*/
-#define DLT_BACNET_MS_TP 165
/*
- *
- * This is used in some OSes to allow a kernel socket filter to distinguish
- * between incoming and outgoing packets, on a socket intended to
- * supply pppd with outgoing packets so it can do dial-on-demand and
- * hangup-on-lack-of-demand; incoming packets are filtered out so they
- * don't cause pppd to hold the connection up (you don't want random
- * input packets such as port scans, packets from old lost connections,
- * etc. to force the connection to stay up).
- *
- * The first byte of the PPP header (0xff03) is modified to accomodate
- * the direction - 0x00 = IN, 0x01 = OUT.
+ * For backwards compatibility.
*/
-#define DLT_PPP_PPPD 166
-
-/*
- * Names for backwards compatibility with older versions of some PPP
- * software; new software should use DLT_PPP_PPPD.
- */
-#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD
-#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD
-
-/*
- * Juniper-private data link type, as per request from
- * for passing on chassis-internal metainformation such as
- * QOS profiles, cookies, etc..
- */
-#define DLT_JUNIPER_PPPOE 167
-#define DLT_JUNIPER_PPPOE_ATM 168
-
-#define DLT_GPRS_LLC 169 /* GPRS LLC */
-#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */
-#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */
-
-/*
- * monitoring equipment.
- */
-#define DLT_GCOM_T1E1 172
-#define DLT_GCOM_SERIAL 173
-
-/*
- * Juniper-private data link type, as per request from
- * for internal communication to Physical Interface Cards (PIC)
- */
-#define DLT_JUNIPER_PIC_PEER 174
-
-/*
- * Measurement Systems. They add an ERF header (see
- * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
- * the link-layer header.
- */
-#define DLT_ERF_ETH 175 /* Ethernet */
-#define DLT_ERF_POS 176 /* Packet-over-SONET */
-
-/*
- * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header
- * includes additional information before the LAPD header, so it's
- * not necessarily a generic LAPD header.
- */
-#define DLT_LINUX_LAPD 177
-
-/*
- * Juniper-private data link type, as per request from
- * The DLT_ are used for prepending meta-information
- * like interface index, interface name
- * before standard Ethernet, PPP, Frelay & C-HDLC Frames
- */
-#define DLT_JUNIPER_ETHER 178
-#define DLT_JUNIPER_PPP 179
-#define DLT_JUNIPER_FRELAY 180
-#define DLT_JUNIPER_CHDLC 181
-
-/*
- * Multi Link Frame Relay (FRF.16)
- */
-#define DLT_MFR 182
-
-/*
- * Juniper-private data link type, as per request from
- * The DLT_ is used for internal communication with a
- * voice Adapter Card (PIC)
- */
-#define DLT_JUNIPER_VP 183
-
-/*
- * Arinc 429 frames.
- * Every frame contains a 32bit A429 label.
- * More documentation on Arinc 429 can be found at
- * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
- */
-#define DLT_A429 184
-
-/*
- * Arinc 653 Interpartition Communication messages.
- * Please refer to the A653-1 standard for more information.
- */
-#define DLT_A653_ICM 185
-
-/*
- */
-#define DLT_USB 186
-
-/*
- * Controller Area Network (CAN) v. 2.0B packets.
- * Used to dump CAN packets coming from a CAN Vector board.
- * More documentation on the CAN v2.0B frames can be found at
- * http://www.can-cia.org/downloads/?269
- */
-#define DLT_CAN20B 190
-
-/*
- * The instruction encodings.
- */
-/* instruction classes */
-#define BPF_CLASS(code) ((code) & 0x07)
-#define BPF_LD 0x00
-#define BPF_LDX 0x01
-#define BPF_ST 0x02
-#define BPF_STX 0x03
-#define BPF_ALU 0x04
-#define BPF_JMP 0x05
-#define BPF_RET 0x06
-#define BPF_MISC 0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code) ((code) & 0x18)
-#define BPF_W 0x00
-#define BPF_H 0x08
-#define BPF_B 0x10
-#define BPF_MODE(code) ((code) & 0xe0)
-#define BPF_IMM 0x00
-#define BPF_ABS 0x20
-#define BPF_IND 0x40
-#define BPF_MEM 0x60
-#define BPF_LEN 0x80
-#define BPF_MSH 0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code) ((code) & 0xf0)
-#define BPF_ADD 0x00
-#define BPF_SUB 0x10
-#define BPF_MUL 0x20
-#define BPF_DIV 0x30
-#define BPF_OR 0x40
-#define BPF_AND 0x50
-#define BPF_LSH 0x60
-#define BPF_RSH 0x70
-#define BPF_NEG 0x80
-#define BPF_JA 0x00
-#define BPF_JEQ 0x10
-#define BPF_JGT 0x20
-#define BPF_JGE 0x30
-#define BPF_JSET 0x40
-#define BPF_SRC(code) ((code) & 0x08)
-#define BPF_K 0x00
-#define BPF_X 0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code) ((code) & 0x18)
-#define BPF_A 0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define BPF_TAX 0x00
-#define BPF_TXA 0x80
-
-/*
- * The instruction data structure.
- */
-struct bpf_insn {
- u_short code;
- u_char jt;
- u_char jf;
- bpf_u_int32 k;
-};
-
-/*
- * Macros for insn array initializers.
- */
-#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
-#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
-
-#if __STDC__ || defined(__cplusplus)
-extern int bpf_validate(struct bpf_insn *, int);
-extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
-#else
-extern int bpf_validate();
-extern u_int bpf_filter();
-#endif
-
-/*
- * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
- */
-#define BPF_MEMWORDS 16
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+#include <pcap/bpf.h>
*/
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-enet.c,v 1.8 2003-11-15 23:24:02 guy Exp $";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-enet.c,v 1.9 2006-10-04 18:09:22 guy Exp $";
#endif
#ifdef HAVE_CONFIG_H
#include <sys/socket.h>
#include <net/if.h>
-#include <pcap-bpf.h>
+#include <pcap/bpf.h>
#include <net/enet.h>
#include <netinet/in.h>
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.124 2006-10-04 15:50:26 hannes Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.125 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
/*
#endif
#include "pcap-int.h"
-#include "sll.h"
+#include "pcap/sll.h"
#ifdef HAVE_DAG_API
#include "pcap-dag.h"
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- * @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.11 2005-04-19 04:25:01 guy Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.12 2006-10-04 18:09:22 guy Exp $ (LBL)
*/
-#ifndef lib_pcap_namedb_h
-#define lib_pcap_namedb_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/*
- * As returned by the pcap_next_etherent()
- * XXX this stuff doesn't belong in this interface, but this
- * library already must do name to address translation, so
- * on systems that don't have support for /etc/ethers, we
- * export these hooks since they'll
+ * For backwards compatibility.
*/
-struct pcap_etherent {
- u_char addr[6];
- char name[122];
-};
-#ifndef PCAP_ETHERS_FILE
-#define PCAP_ETHERS_FILE "/etc/ethers"
-#endif
-struct pcap_etherent *pcap_next_etherent(FILE *);
-u_char *pcap_ether_hostton(const char*);
-u_char *pcap_ether_aton(const char *);
-
-bpf_u_int32 **pcap_nametoaddr(const char *);
-#ifdef INET6
-struct addrinfo *pcap_nametoaddrinfo(const char *);
-#endif
-bpf_u_int32 pcap_nametonetaddr(const char *);
-
-int pcap_nametoport(const char *, int *, int *);
-int pcap_nametoportrange(const char *, int *, int *, int *);
-int pcap_nametoproto(const char *);
-int pcap_nametoeproto(const char *);
-int pcap_nametollc(const char *);
-/*
- * If a protocol is unknown, PROTO_UNDEF is returned.
- * Also, pcap_nametoport() returns the protocol along with the port number.
- * If there are ambiguous entried in /etc/services (i.e. domain
- * can be either tcp or udp) PROTO_UNDEF is returned.
- */
-#define PROTO_UNDEF -1
-
-/* XXX move these to pcap-int.h? */
-int __pcap_atodn(const char *, bpf_u_int32 *);
-int __pcap_atoin(const char *, bpf_u_int32 *);
-u_short __pcap_nametodnaddr(const char *);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+#include <pcap/namedb.h>
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.93 2005-05-03 18:54:00 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.94 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include <unistd.h>
/*
- * Make "pcap.h" not include "pcap-bpf.h"; we are going to include the
+ * Make "pcap.h" not include "pcap/bpf.h"; we are going to include the
* native OS version, as we need various BPF ioctls from it.
*/
#define PCAP_DONT_INCLUDE_PCAP_BPF_H
}
/*
- * We include the OS's <net/bpf.h>, not our "pcap-bpf.h", so we probably
+ * We include the OS's <net/bpf.h>, not our "pcap/bpf.h", so we probably
* don't get DLT_DOCSIS defined.
*/
#ifndef DLT_DOCSIS
#endif
#include "pcap-int.h"
-#include "sll.h"
+#include "pcap/usb.h"
#ifdef NEED_STRERROR_H
#include "strerror.h"
-/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */
/*
* Copyright (c) 1993, 1994, 1995, 1996, 1997
* The Regents of the University of California. All rights reserved.
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- * @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.58 2006-02-09 22:26:12 guy Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.59 2006-10-04 18:09:22 guy Exp $ (LBL)
*/
-#ifndef lib_pcap_h
-#define lib_pcap_h
-
-#if defined(WIN32)
- #include <pcap-stdinc.h>
-#elif defined(MSDOS)
- #include <sys/types.h>
- #include <sys/socket.h> /* u_int, u_char etc. */
-#else /* UN*X */
- #include <sys/types.h>
- #include <sys/time.h>
-#endif /* WIN32/MSDOS/UN*X */
-
-#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
-#include <pcap-bpf.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define PCAP_VERSION_MAJOR 2
-#define PCAP_VERSION_MINOR 4
-
-#define PCAP_ERRBUF_SIZE 256
-
/*
- * Compatibility for systems that have a bpf.h that
- * predates the bpf typedefs for 64-bit support.
- */
-#if BPF_RELEASE - 0 < 199406
-typedef int bpf_int32;
-typedef u_int bpf_u_int32;
-#endif
-
-typedef struct pcap pcap_t;
-typedef struct pcap_dumper pcap_dumper_t;
-typedef struct pcap_if pcap_if_t;
-typedef struct pcap_addr pcap_addr_t;
-
-/*
- * The first record in the file contains saved values for some
- * of the flags used in the printout phases of tcpdump.
- * Many fields here are 32 bit ints so compilers won't insert unwanted
- * padding; these files need to be interchangeable across architectures.
- *
- * Do not change the layout of this structure, in any way (this includes
- * changes that only affect the length of fields in this structure).
- *
- * Also, do not change the interpretation of any of the members of this
- * structure, in any way (this includes using values other than
- * LINKTYPE_ values, as defined in "savefile.c", in the "linktype"
- * field).
- *
- * Instead:
- *
- * introduce a new structure for the new format, if the layout
- * of the structure changed;
- *
- * magic number for your new capture file format, and, when
- * you get the new magic number, put it in "savefile.c";
- *
- * use that magic number for save files with the changed file
- * header;
+ * For backwards compatibility.
*
- * make the code in "savefile.c" capable of reading files with
- * the old file header as well as files with the new file header
- * (using the magic number to determine the header format).
- *
- * versions of libpcap and programs that use it (such as tcpdump) will
- * be able to read your new capture file format.
- */
-struct pcap_file_header {
- bpf_u_int32 magic;
- u_short version_major;
- u_short version_minor;
- bpf_int32 thiszone; /* gmt to local correction */
- bpf_u_int32 sigfigs; /* accuracy of timestamps */
- bpf_u_int32 snaplen; /* max length saved portion of each pkt */
- bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */
-};
-
-typedef enum {
- PCAP_D_INOUT = 0,
- PCAP_D_IN,
- PCAP_D_OUT
-} pcap_direction_t;
-
-/*
- * Generic per-packet information, as supplied by libpcap.
- *
- * The time stamp can and should be a "struct timeval", regardless of
- * whether your system supports 32-bit tv_sec in "struct timeval",
- * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit
- * and 64-bit applications. The on-disk format of savefiles uses 32-bit
- * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit
- * and 64-bit versions of libpcap, even if they're on the same platform,
- * should supply the appropriate version of "struct timeval", even if
- * that's not what the underlying packet capture mechanism supplies.
- */
-struct pcap_pkthdr {
- struct timeval ts; /* time stamp */
- bpf_u_int32 caplen; /* length of portion present */
- bpf_u_int32 len; /* length this packet (off wire) */
-};
-
-/*
- * As returned by the pcap_stats()
- */
-struct pcap_stat {
- u_int ps_recv; /* number of packets received */
- u_int ps_drop; /* number of packets dropped */
- u_int ps_ifdrop; /* drops by interface XXX not yet supported */
-#ifdef WIN32
- u_int bs_capt; /* number of packets that reach the application */
-#endif /* WIN32 */
-};
-
-#ifdef MSDOS
-/*
- * As returned by the pcap_stats_ex()
+ * Note to OS vendors: do NOT get rid of this file! Many applications
+ * expect to be able to include <pcap.h>, and at least some of them
+ * go through contortions in their configure scripts to try to detect
+ * OSes that have "helpfully" moved pcap.h to <pcap/pcap.h> without
+ * leaving behind a <pcap.h> file.
*/
-struct pcap_stat_ex {
- u_long rx_packets; /* total packets received */
- u_long tx_packets; /* total packets transmitted */
- u_long rx_bytes; /* total bytes received */
- u_long tx_bytes; /* total bytes transmitted */
- u_long rx_errors; /* bad packets received */
- u_long tx_errors; /* packet transmit problems */
- u_long rx_dropped; /* no space in Rx buffers */
- u_long tx_dropped; /* no space available for Tx */
- u_long multicast; /* multicast packets received */
- u_long collisions;
-
- /* detailed rx_errors: */
- u_long rx_length_errors;
- u_long rx_over_errors; /* receiver ring buff overflow */
- u_long rx_crc_errors; /* recv'd pkt with crc error */
- u_long rx_frame_errors; /* recv'd frame alignment error */
- u_long rx_fifo_errors; /* recv'r fifo overrun */
- u_long rx_missed_errors; /* recv'r missed packet */
-
- /* detailed tx_errors */
- u_long tx_aborted_errors;
- u_long tx_carrier_errors;
- u_long tx_fifo_errors;
- u_long tx_heartbeat_errors;
- u_long tx_window_errors;
- };
-#endif
-
-/*
- * Item in a list of interfaces.
- */
-struct pcap_if {
- struct pcap_if *next;
- char *name; /* name to hand to "pcap_open_live()" */
- char *description; /* textual description of interface, or NULL */
- struct pcap_addr *addresses;
- bpf_u_int32 flags; /* PCAP_IF_ interface flags */
-};
-
-#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */
-
-/*
- * Representation of an interface address.
- */
-struct pcap_addr {
- struct pcap_addr *next;
- struct sockaddr *addr; /* address */
- struct sockaddr *netmask; /* netmask for that address */
- struct sockaddr *broadaddr; /* broadcast address for that address */
- struct sockaddr *dstaddr; /* P2P destination address for that address */
-};
-
-typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *,
- const u_char *);
-
-char *pcap_lookupdev(char *);
-int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *);
-pcap_t *pcap_open_live(const char *, int, int, int, char *);
-pcap_t *pcap_open_dead(int, int);
-pcap_t *pcap_open_offline(const char *, char *);
-pcap_t *pcap_fopen_offline(FILE *, char *);
-void pcap_close(pcap_t *);
-int pcap_loop(pcap_t *, int, pcap_handler, u_char *);
-int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *);
-const u_char*
- pcap_next(pcap_t *, struct pcap_pkthdr *);
-int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **);
-void pcap_breakloop(pcap_t *);
-int pcap_stats(pcap_t *, struct pcap_stat *);
-int pcap_setfilter(pcap_t *, struct bpf_program *);
-int pcap_setdirection(pcap_t *, pcap_direction_t);
-int pcap_getnonblock(pcap_t *, char *);
-int pcap_setnonblock(pcap_t *, int, char *);
-void pcap_perror(pcap_t *, char *);
-int pcap_inject(pcap_t *, const void *, size_t);
-int pcap_sendpacket(pcap_t *, const u_char *, int);
-char *pcap_strerror(int);
-char *pcap_geterr(pcap_t *);
-int pcap_compile(pcap_t *, struct bpf_program *, char *, int,
- bpf_u_int32);
-int pcap_compile_nopcap(int, int, struct bpf_program *,
- char *, int, bpf_u_int32);
-void pcap_freecode(struct bpf_program *);
-int pcap_datalink(pcap_t *);
-int pcap_list_datalinks(pcap_t *, int **);
-int pcap_set_datalink(pcap_t *, int);
-int pcap_datalink_name_to_val(const char *);
-const char *pcap_datalink_val_to_name(int);
-const char *pcap_datalink_val_to_description(int);
-int pcap_snapshot(pcap_t *);
-int pcap_is_swapped(pcap_t *);
-int pcap_major_version(pcap_t *);
-int pcap_minor_version(pcap_t *);
-
-/* XXX */
-FILE *pcap_file(pcap_t *);
-int pcap_fileno(pcap_t *);
-
-pcap_dumper_t *pcap_dump_open(pcap_t *, const char *);
-pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp);
-FILE *pcap_dump_file(pcap_dumper_t *);
-long pcap_dump_ftell(pcap_dumper_t *);
-int pcap_dump_flush(pcap_dumper_t *);
-void pcap_dump_close(pcap_dumper_t *);
-void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *);
-
-int pcap_findalldevs(pcap_if_t **, char *);
-void pcap_freealldevs(pcap_if_t *);
-
-const char *pcap_lib_version(void);
-
-/* XXX this guy lives in the bpf tree */
-u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
-int bpf_validate(struct bpf_insn *f, int len);
-char *bpf_image(struct bpf_insn *, int);
-void bpf_dump(struct bpf_program *, int);
-
-#if defined(WIN32)
-
-/*
- * Win32 definitions
- */
-
-int pcap_setbuff(pcap_t *p, int dim);
-int pcap_setmode(pcap_t *p, int mode);
-int pcap_setmintocopy(pcap_t *p, int size);
-
-#ifdef WPCAP
-/* Include file with the wpcap-specific extensions */
-#include <Win32-Extensions.h>
-#endif /* WPCAP */
-
-#define MODE_CAPT 0
-#define MODE_STAT 1
-#define MODE_MON 2
-
-#elif defined(MSDOS)
-
-/*
- * MS-DOS definitions
- */
-
-int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *);
-void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait);
-u_long pcap_mac_packets (void);
-
-#else /* UN*X */
-
-/*
- * UN*X definitions
- */
-
-int pcap_get_selectable_fd(pcap_t *);
-
-#endif /* WIN32/MSDOS/UN*X */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+#include <pcap/pcap.h>
--- /dev/null
+/*-
+ * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+ * The Regents of the University of California. All rights reserved.
+ *
+ * This code is derived from the Stanford/CMU enet packet filter,
+ * (net/enet.c) distributed as part of 4.3BSD, and code contributed
+ * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
+ * Berkeley Laboratory.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)bpf.h 7.1 (Berkeley) 5/7/91
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.1 2006-10-04 18:09:22 guy Exp $ (LBL)
+ */
+
+/*
+ * This is libpcap's cut-down version of bpf.h; it includes only
+ * the stuff needed for the code generator and the userland BPF
+ * interpreter, and the libpcap APIs for setting filters, etc..
+ *
+ * "pcap-bpf.c" will include the native OS version, as it deals with
+ * the OS's BPF implementation.
+ *
+ * XXX - should this all just be moved to "pcap.h"?
+ */
+
+#ifndef BPF_MAJOR_VERSION
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* BSD style release date */
+#define BPF_RELEASE 199606
+
+#ifdef MSDOS /* must be 32-bit */
+typedef long bpf_int32;
+typedef unsigned long bpf_u_int32;
+#else
+typedef int bpf_int32;
+typedef u_int bpf_u_int32;
+#endif
+
+/*
+ * Alignment macros. BPF_WORDALIGN rounds up to the next
+ * even multiple of BPF_ALIGNMENT.
+ */
+#ifndef __NetBSD__
+#define BPF_ALIGNMENT sizeof(bpf_int32)
+#else
+#define BPF_ALIGNMENT sizeof(long)
+#endif
+#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
+
+#define BPF_MAXINSNS 512
+#define BPF_MAXBUFSIZE 0x8000
+#define BPF_MINBUFSIZE 32
+
+/*
+ * Structure for "pcap_compile()", "pcap_setfilter()", etc..
+ */
+struct bpf_program {
+ u_int bf_len;
+ struct bpf_insn *bf_insns;
+};
+
+/*
+ * Struct return by BIOCVERSION. This represents the version number of
+ * the filter language described by the instruction encodings below.
+ * bpf understands a program iff kernel_major == filter_major &&
+ * kernel_minor >= filter_minor, that is, if the value returned by the
+ * running kernel has the same major number and a minor number equal
+ * equal to or less than the filter being downloaded. Otherwise, the
+ * results are undefined, meaning an error may be returned or packets
+ * may be accepted haphazardly.
+ * It has nothing to do with the source code version.
+ */
+struct bpf_version {
+ u_short bv_major;
+ u_short bv_minor;
+};
+/* Current version number of filter architecture. */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ * Data-link level type codes.
+ *
+ * Do *NOT* add new values to this list without asking
+ * risk of using a value that's already being used for some other purpose,
+ * and of having tools that read libpcap-format captures not being able
+ * to handle captures with your new DLT_ value, with no hope that they
+ * will ever be changed to do so (as that would destroy their ability
+ * to read captures using that value for that other purpose).
+ */
+
+/*
+ * These are the types that are the same on all platforms, and that
+ * have been defined by <net/bpf.h> for ages.
+ */
+#define DLT_NULL 0 /* BSD loopback encapsulation */
+#define DLT_EN10MB 1 /* Ethernet (10Mb) */
+#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */
+#define DLT_AX25 3 /* Amateur Radio AX.25 */
+#define DLT_PRONET 4 /* Proteon ProNET Token Ring */
+#define DLT_CHAOS 5 /* Chaos */
+#define DLT_IEEE802 6 /* IEEE 802 Networks */
+#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */
+#define DLT_SLIP 8 /* Serial Line IP */
+#define DLT_PPP 9 /* Point-to-point Protocol */
+#define DLT_FDDI 10 /* FDDI */
+
+/*
+ * These are types that are different on some platforms, and that
+ * have been defined by <net/bpf.h> for ages. We use #ifdefs to
+ * detect the BSDs that define them differently from the traditional
+ * libpcap <net/bpf.h>
+ *
+ * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
+ * but I don't know what the right #define is for BSD/OS.
+ */
+#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */
+
+#ifdef __OpenBSD__
+#define DLT_RAW 14 /* raw IP */
+#else
+#define DLT_RAW 12 /* raw IP */
+#endif
+
+/*
+ * Given that the only OS that currently generates BSD/OS SLIP or PPP
+ * is, well, BSD/OS, arguably everybody should have chosen its values
+ * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they
+ * didn't. So it goes.
+ */
+#if defined(__NetBSD__) || defined(__FreeBSD__)
+#ifndef DLT_SLIP_BSDOS
+#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */
+#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */
+#endif
+#else
+#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */
+#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */
+#endif
+
+/*
+ * 17 is used for DLT_OLD_PFLOG in OpenBSD;
+ * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below.
+ * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else.
+ */
+
+#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */
+
+/*
+ * Apparently Redback uses this for its SmartEdge 400/800. I hope
+ * nobody else decided to use it, too.
+ */
+#define DLT_REDBACK_SMARTEDGE 32
+
+/*
+ * These values are defined by NetBSD; other platforms should refrain from
+ * using them for other purposes, so that NetBSD savefiles with link
+ * types of 50 or 51 can be read as this type on all platforms.
+ */
+#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */
+#define DLT_PPP_ETHER 51 /* PPP over Ethernet */
+
+/*
+ * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses
+ * a link-layer type of 99 for the tcpdump it supplies. The link-layer
+ * header has 6 bytes of unknown data, something that appears to be an
+ * Ethernet type, and 36 bytes that appear to be 0 in at least one capture
+ * I've seen.
+ */
+#define DLT_SYMANTEC_FIREWALL 99
+
+/*
+ * Values between 100 and 103 are used in capture file headers as
+ * link-layer types corresponding to DLT_ types that differ
+ * between platforms; don't use those values for new DLT_ new types.
+ */
+
+/*
+ * This value was defined by libpcap 0.5; platforms that have defined
+ * it with a different value should define it here with that value -
+ * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
+ * whatever value that happens to be, so programs will correctly
+ * handle files with that link type regardless of the value of
+ * DLT_C_HDLC.
+ *
+ * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
+ * compatibility with programs written for BSD/OS.
+ *
+ * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
+ * for source compatibility with programs written for libpcap 0.5.
+ */
+#define DLT_C_HDLC 104 /* Cisco HDLC */
+#define DLT_CHDLC DLT_C_HDLC
+
+#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */
+
+/*
+ * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW,
+ * except when it isn't. (I.e., sometimes it's just raw IP, and
+ * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL,
+ * so that we don't have to worry about the link-layer header.)
+ */
+
+/*
+ * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
+ * with other values.
+ * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
+ * (DLCI, etc.).
+ */
+#define DLT_FRELAY 107
+
+/*
+ * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
+ * that the AF_ type in the link-layer header is in network byte order.
+ *
+ * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
+ * define it as 108 here. If OpenBSD picks up this file, it should
+ * define DLT_LOOP as 12 in its version, as per the comment above -
+ * and should not use 108 as a DLT_ value.
+ */
+#define DLT_LOOP 108
+
+/*
+ * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
+ * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
+ * than OpenBSD.
+ */
+#ifdef __OpenBSD__
+#define DLT_ENC 13
+#else
+#define DLT_ENC 109
+#endif
+
+/*
+ * Values between 110 and 112 are reserved for use in capture file headers
+ * as link-layer types corresponding to DLT_ types that might differ
+ * between platforms; don't use those values for new DLT_ types
+ * other than the corresponding DLT_ types.
+ */
+
+/*
+ * This is for Linux cooked sockets.
+ */
+#define DLT_LINUX_SLL 113
+
+/*
+ * Apple LocalTalk hardware.
+ */
+#define DLT_LTALK 114
+
+/*
+ * Acorn Econet.
+ */
+#define DLT_ECONET 115
+
+/*
+ * Reserved for use with OpenBSD ipfilter.
+ */
+#define DLT_IPFILTER 116
+
+/*
+ * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023
+ * in SuSE 6.3, so we can't use 17 for it in capture-file headers.
+ *
+ * XXX: is there a conflict with DLT_PFSYNC 18 as well?
+ */
+#ifdef __OpenBSD__
+#define DLT_OLD_PFLOG 17
+#define DLT_PFSYNC 18
+#endif
+#define DLT_PFLOG 117
+
+/*
+ * Registered for Cisco-internal use.
+ */
+#define DLT_CISCO_IOS 118
+
+/*
+ * For 802.11 cards using the Prism II chips, with a link-layer
+ * header including Prism monitor mode information plus an 802.11
+ * header.
+ */
+#define DLT_PRISM_HEADER 119
+
+/*
+ * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
+ * (see Doug Ambrisko's FreeBSD patches).
+ */
+#define DLT_AIRONET_HEADER 120
+
+/*
+ * Reserved for Siemens HiPath HDLC.
+ */
+#define DLT_HHDLC 121
+
+/*
+ * This is for RFC 2625 IP-over-Fibre Channel.
+ *
+ * This is not for use with raw Fibre Channel, where the link-layer
+ * header starts with a Fibre Channel frame header; it's for IP-over-FC,
+ * where the link-layer header starts with an RFC 2625 Network_Header
+ * field.
+ */
+#define DLT_IP_OVER_FC 122
+
+/*
+ * This is for Full Frontal ATM on Solaris with SunATM, with a
+ * pseudo-header followed by an AALn PDU.
+ *
+ * There may be other forms of Full Frontal ATM on other OSes,
+ * with different pseudo-headers.
+ *
+ * If ATM software returns a pseudo-header with VPI/VCI information
+ * (and, ideally, packet type information, e.g. signalling, ILMI,
+ * LANE, LLC-multiplexed traffic, etc.), it should not use
+ * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
+ * and the like don't have to infer the presence or absence of a
+ * pseudo-header and the form of the pseudo-header.
+ */
+#define DLT_SUNATM 123 /* Solaris+SunATM */
+
+/*
+ * for private use.
+ */
+#define DLT_RIO 124 /* RapidIO */
+#define DLT_PCI_EXP 125 /* PCI Express */
+#define DLT_AURORA 126 /* Xilinx Aurora link layer */
+
+/*
+ * Header for 802.11 plus a number of bits of link-layer information
+ * including radio information, used by some recent BSD drivers as
+ * well as the madwifi Atheros driver for Linux.
+ */
+#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */
+
+/*
+ * Reserved for the TZSP encapsulation, as per request from
+ * TZSP is a generic encapsulation for any other link type,
+ * which includes a means to include meta-information
+ * with the packet, e.g. signal strength and channel
+ * for 802.11 packets.
+ */
+#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */
+
+/*
+ * BSD's ARCNET headers have the source host, destination host,
+ * and type at the beginning of the packet; that's what's handed
+ * up to userland via BPF.
+ *
+ * Linux's ARCNET headers, however, have a 2-byte offset field
+ * between the host IDs and the type; that's what's handed up
+ * to userland via PF_PACKET sockets.
+ *
+ * We therefore have to have separate DLT_ values for them.
+ */
+#define DLT_ARCNET_LINUX 129 /* ARCNET */
+
+/*
+ * Juniper-private data link types, as per request from
+ * for passing on chassis-internal metainformation such as
+ * QOS profiles, etc..
+ */
+#define DLT_JUNIPER_MLPPP 130
+#define DLT_JUNIPER_MLFR 131
+#define DLT_JUNIPER_ES 132
+#define DLT_JUNIPER_GGSN 133
+#define DLT_JUNIPER_MFR 134
+#define DLT_JUNIPER_ATM2 135
+#define DLT_JUNIPER_SERVICES 136
+#define DLT_JUNIPER_ATM1 137
+
+/*
+ * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
+ * header:
+ *
+ * #define FIREWIRE_EUI64_LEN 8
+ * struct firewire_header {
+ * u_char firewire_dhost[FIREWIRE_EUI64_LEN];
+ * u_char firewire_shost[FIREWIRE_EUI64_LEN];
+ * u_short firewire_type;
+ * };
+ *
+ * with "firewire_type" being an Ethernet type value, rather than,
+ * for example, raw GASP frames being handed up.
+ */
+#define DLT_APPLE_IP_OVER_IEEE1394 138
+
+/*
+ * Various SS7 encapsulations, as per a request from Jeff Morriss
+ * <jeff.morriss[AT]ulticom.com> and subsequent discussions.
+ */
+#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */
+#define DLT_MTP2 140 /* MTP2, without pseudo-header */
+#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */
+#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */
+
+/*
+ * DOCSIS MAC frames.
+ */
+#define DLT_DOCSIS 143
+
+/*
+ * Linux-IrDA packets. Protocol defined at http://www.irda.org.
+ * Those packets include IrLAP headers and above (IrLMP...), but
+ * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
+ * framing can be handled by the hardware and depend on the bitrate.
+ * This is exactly the format you would get capturing on a Linux-IrDA
+ * interface (irdaX), but not on a raw serial port.
+ * Note the capture is done in "Linux-cooked" mode, so each packet include
+ * a fake packet header (struct sll_header). This is because IrDA packet
+ * decoding is dependant on the direction of the packet (incomming or
+ * outgoing).
+ * When/if other platform implement IrDA capture, we may revisit the
+ * issue and define a real DLT_IRDA...
+ * Jean II
+ */
+#define DLT_LINUX_IRDA 144
+
+/*
+ * Reserved for IBM SP switch and IBM Next Federation switch.
+ */
+#define DLT_IBM_SP 145
+#define DLT_IBM_SN 146
+
+/*
+ * Reserved for private use. If you have some link-layer header type
+ * that you want to use within your organization, with the capture files
+ * using that link-layer header type not ever be sent outside your
+ * organization, you can use these values.
+ *
+ * No libpcap release will use these for any purpose, nor will any
+ * tcpdump release use them, either.
+ *
+ * Do *NOT* use these in capture files that you expect anybody not using
+ * your private versions of capture-file-reading tools to read; in
+ * particular, do *NOT* use them in products, otherwise you may find that
+ * people won't be able to use tcpdump, or snort, or Ethereal, or... to
+ * read capture files from your firewall/intrusion detection/traffic
+ * monitoring/etc. appliance, or whatever product uses that DLT_ value,
+ * and you may also find that the developers of those applications will
+ * not accept patches to let them read those files.
+ *
+ * Also, do not use them if somebody might send you a capture using them
+ * for *their* private type and tools using them for *your* private type
+ * would have to read them.
+ *
+ * as per the comment above, and use the type you're given.
+ */
+#define DLT_USER0 147
+#define DLT_USER1 148
+#define DLT_USER2 149
+#define DLT_USER3 150
+#define DLT_USER4 151
+#define DLT_USER5 152
+#define DLT_USER6 153
+#define DLT_USER7 154
+#define DLT_USER8 155
+#define DLT_USER9 156
+#define DLT_USER10 157
+#define DLT_USER11 158
+#define DLT_USER12 159
+#define DLT_USER13 160
+#define DLT_USER14 161
+#define DLT_USER15 162
+
+/*
+ * For future use with 802.11 captures - defined by AbsoluteValue
+ * Systems to store a number of bits of link-layer information
+ * including radio information:
+ *
+ * http://www.shaftnet.org/~pizza/software/capturefrm.txt
+ *
+ * but it might be used by some non-AVS drivers now or in the
+ * future.
+ */
+#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */
+
+/*
+ * Juniper-private data link type, as per request from
+ * for passing on chassis-internal metainformation such as
+ * QOS profiles, etc..
+ */
+#define DLT_JUNIPER_MONITOR 164
+
+/*
+ * Reserved for BACnet MS/TP.
+ */
+#define DLT_BACNET_MS_TP 165
+
+/*
+ *
+ * This is used in some OSes to allow a kernel socket filter to distinguish
+ * between incoming and outgoing packets, on a socket intended to
+ * supply pppd with outgoing packets so it can do dial-on-demand and
+ * hangup-on-lack-of-demand; incoming packets are filtered out so they
+ * don't cause pppd to hold the connection up (you don't want random
+ * input packets such as port scans, packets from old lost connections,
+ * etc. to force the connection to stay up).
+ *
+ * The first byte of the PPP header (0xff03) is modified to accomodate
+ * the direction - 0x00 = IN, 0x01 = OUT.
+ */
+#define DLT_PPP_PPPD 166
+
+/*
+ * Names for backwards compatibility with older versions of some PPP
+ * software; new software should use DLT_PPP_PPPD.
+ */
+#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD
+#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD
+
+/*
+ * Juniper-private data link type, as per request from
+ * for passing on chassis-internal metainformation such as
+ * QOS profiles, cookies, etc..
+ */
+#define DLT_JUNIPER_PPPOE 167
+#define DLT_JUNIPER_PPPOE_ATM 168
+
+#define DLT_GPRS_LLC 169 /* GPRS LLC */
+#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */
+#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */
+
+/*
+ * monitoring equipment.
+ */
+#define DLT_GCOM_T1E1 172
+#define DLT_GCOM_SERIAL 173
+
+/*
+ * Juniper-private data link type, as per request from
+ * for internal communication to Physical Interface Cards (PIC)
+ */
+#define DLT_JUNIPER_PIC_PEER 174
+
+/*
+ * Measurement Systems. They add an ERF header (see
+ * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
+ * the link-layer header.
+ */
+#define DLT_ERF_ETH 175 /* Ethernet */
+#define DLT_ERF_POS 176 /* Packet-over-SONET */
+
+/*
+ * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header
+ * includes additional information before the LAPD header, so it's
+ * not necessarily a generic LAPD header.
+ */
+#define DLT_LINUX_LAPD 177
+
+/*
+ * Juniper-private data link type, as per request from
+ * The DLT_ are used for prepending meta-information
+ * like interface index, interface name
+ * before standard Ethernet, PPP, Frelay & C-HDLC Frames
+ */
+#define DLT_JUNIPER_ETHER 178
+#define DLT_JUNIPER_PPP 179
+#define DLT_JUNIPER_FRELAY 180
+#define DLT_JUNIPER_CHDLC 181
+
+/*
+ * Multi Link Frame Relay (FRF.16)
+ */
+#define DLT_MFR 182
+
+/*
+ * Juniper-private data link type, as per request from
+ * The DLT_ is used for internal communication with a
+ * voice Adapter Card (PIC)
+ */
+#define DLT_JUNIPER_VP 183
+
+/*
+ * Arinc 429 frames.
+ * Every frame contains a 32bit A429 label.
+ * More documentation on Arinc 429 can be found at
+ * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
+ */
+#define DLT_A429 184
+
+/*
+ * Arinc 653 Interpartition Communication messages.
+ * Please refer to the A653-1 standard for more information.
+ */
+#define DLT_A653_ICM 185
+
+/*
+ */
+#define DLT_USB 186
+
+/*
+ * Controller Area Network (CAN) v. 2.0B packets.
+ * Used to dump CAN packets coming from a CAN Vector board.
+ * More documentation on the CAN v2.0B frames can be found at
+ * http://www.can-cia.org/downloads/?269
+ */
+#define DLT_CAN20B 190
+
+/*
+ * The instruction encodings.
+ */
+/* instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code) ((code) & 0x18)
+#define BPF_A 0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define BPF_TAX 0x00
+#define BPF_TXA 0x80
+
+/*
+ * The instruction data structure.
+ */
+struct bpf_insn {
+ u_short code;
+ u_char jt;
+ u_char jf;
+ bpf_u_int32 k;
+};
+
+/*
+ * Macros for insn array initializers.
+ */
+#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
+#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
+
+#if __STDC__ || defined(__cplusplus)
+extern int bpf_validate(struct bpf_insn *, int);
+extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
+#else
+extern int bpf_validate();
+extern u_int bpf_filter();
+#endif
+
+/*
+ * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
+ */
+#define BPF_MEMWORDS 16
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 1994, 1996
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the Computer Systems
+ * Engineering Group at Lawrence Berkeley Laboratory.
+ * 4. Neither the name of the University nor of the Laboratory may be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006-10-04 18:09:22 guy Exp $ (LBL)
+ */
+
+#ifndef lib_pcap_namedb_h
+#define lib_pcap_namedb_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * As returned by the pcap_next_etherent()
+ * XXX this stuff doesn't belong in this interface, but this
+ * library already must do name to address translation, so
+ * on systems that don't have support for /etc/ethers, we
+ * export these hooks since they'll
+ */
+struct pcap_etherent {
+ u_char addr[6];
+ char name[122];
+};
+#ifndef PCAP_ETHERS_FILE
+#define PCAP_ETHERS_FILE "/etc/ethers"
+#endif
+struct pcap_etherent *pcap_next_etherent(FILE *);
+u_char *pcap_ether_hostton(const char*);
+u_char *pcap_ether_aton(const char *);
+
+bpf_u_int32 **pcap_nametoaddr(const char *);
+#ifdef INET6
+struct addrinfo *pcap_nametoaddrinfo(const char *);
+#endif
+bpf_u_int32 pcap_nametonetaddr(const char *);
+
+int pcap_nametoport(const char *, int *, int *);
+int pcap_nametoportrange(const char *, int *, int *, int *);
+int pcap_nametoproto(const char *);
+int pcap_nametoeproto(const char *);
+int pcap_nametollc(const char *);
+/*
+ * If a protocol is unknown, PROTO_UNDEF is returned.
+ * Also, pcap_nametoport() returns the protocol along with the port number.
+ * If there are ambiguous entried in /etc/services (i.e. domain
+ * can be either tcp or udp) PROTO_UNDEF is returned.
+ */
+#define PROTO_UNDEF -1
+
+/* XXX move these to pcap-int.h? */
+int __pcap_atodn(const char *, bpf_u_int32 *);
+int __pcap_atoin(const char *, bpf_u_int32 *);
+u_short __pcap_nametodnaddr(const char *);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */
+/*
+ * Copyright (c) 1993, 1994, 1995, 1996, 1997
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the Computer Systems
+ * Engineering Group at Lawrence Berkeley Laboratory.
+ * 4. Neither the name of the University nor of the Laboratory may be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.1 2006-10-04 18:09:22 guy Exp $ (LBL)
+ */
+
+#ifndef lib_pcap_pcap_h
+#define lib_pcap_pcap_h
+
+#if defined(WIN32)
+ #include <pcap-stdinc.h>
+#elif defined(MSDOS)
+ #include <sys/types.h>
+ #include <sys/socket.h> /* u_int, u_char etc. */
+#else /* UN*X */
+ #include <sys/types.h>
+ #include <sys/time.h>
+#endif /* WIN32/MSDOS/UN*X */
+
+#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
+#include <pcap/bpf.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PCAP_VERSION_MAJOR 2
+#define PCAP_VERSION_MINOR 4
+
+#define PCAP_ERRBUF_SIZE 256
+
+/*
+ * Compatibility for systems that have a bpf.h that
+ * predates the bpf typedefs for 64-bit support.
+ */
+#if BPF_RELEASE - 0 < 199406
+typedef int bpf_int32;
+typedef u_int bpf_u_int32;
+#endif
+
+typedef struct pcap pcap_t;
+typedef struct pcap_dumper pcap_dumper_t;
+typedef struct pcap_if pcap_if_t;
+typedef struct pcap_addr pcap_addr_t;
+
+/*
+ * The first record in the file contains saved values for some
+ * of the flags used in the printout phases of tcpdump.
+ * Many fields here are 32 bit ints so compilers won't insert unwanted
+ * padding; these files need to be interchangeable across architectures.
+ *
+ * Do not change the layout of this structure, in any way (this includes
+ * changes that only affect the length of fields in this structure).
+ *
+ * Also, do not change the interpretation of any of the members of this
+ * structure, in any way (this includes using values other than
+ * LINKTYPE_ values, as defined in "savefile.c", in the "linktype"
+ * field).
+ *
+ * Instead:
+ *
+ * introduce a new structure for the new format, if the layout
+ * of the structure changed;
+ *
+ * magic number for your new capture file format, and, when
+ * you get the new magic number, put it in "savefile.c";
+ *
+ * use that magic number for save files with the changed file
+ * header;
+ *
+ * make the code in "savefile.c" capable of reading files with
+ * the old file header as well as files with the new file header
+ * (using the magic number to determine the header format).
+ *
+ * versions of libpcap and programs that use it (such as tcpdump) will
+ * be able to read your new capture file format.
+ */
+struct pcap_file_header {
+ bpf_u_int32 magic;
+ u_short version_major;
+ u_short version_minor;
+ bpf_int32 thiszone; /* gmt to local correction */
+ bpf_u_int32 sigfigs; /* accuracy of timestamps */
+ bpf_u_int32 snaplen; /* max length saved portion of each pkt */
+ bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */
+};
+
+typedef enum {
+ PCAP_D_INOUT = 0,
+ PCAP_D_IN,
+ PCAP_D_OUT
+} pcap_direction_t;
+
+/*
+ * Generic per-packet information, as supplied by libpcap.
+ *
+ * The time stamp can and should be a "struct timeval", regardless of
+ * whether your system supports 32-bit tv_sec in "struct timeval",
+ * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit
+ * and 64-bit applications. The on-disk format of savefiles uses 32-bit
+ * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit
+ * and 64-bit versions of libpcap, even if they're on the same platform,
+ * should supply the appropriate version of "struct timeval", even if
+ * that's not what the underlying packet capture mechanism supplies.
+ */
+struct pcap_pkthdr {
+ struct timeval ts; /* time stamp */
+ bpf_u_int32 caplen; /* length of portion present */
+ bpf_u_int32 len; /* length this packet (off wire) */
+};
+
+/*
+ * As returned by the pcap_stats()
+ */
+struct pcap_stat {
+ u_int ps_recv; /* number of packets received */
+ u_int ps_drop; /* number of packets dropped */
+ u_int ps_ifdrop; /* drops by interface XXX not yet supported */
+#ifdef WIN32
+ u_int bs_capt; /* number of packets that reach the application */
+#endif /* WIN32 */
+};
+
+#ifdef MSDOS
+/*
+ * As returned by the pcap_stats_ex()
+ */
+struct pcap_stat_ex {
+ u_long rx_packets; /* total packets received */
+ u_long tx_packets; /* total packets transmitted */
+ u_long rx_bytes; /* total bytes received */
+ u_long tx_bytes; /* total bytes transmitted */
+ u_long rx_errors; /* bad packets received */
+ u_long tx_errors; /* packet transmit problems */
+ u_long rx_dropped; /* no space in Rx buffers */
+ u_long tx_dropped; /* no space available for Tx */
+ u_long multicast; /* multicast packets received */
+ u_long collisions;
+
+ /* detailed rx_errors: */
+ u_long rx_length_errors;
+ u_long rx_over_errors; /* receiver ring buff overflow */
+ u_long rx_crc_errors; /* recv'd pkt with crc error */
+ u_long rx_frame_errors; /* recv'd frame alignment error */
+ u_long rx_fifo_errors; /* recv'r fifo overrun */
+ u_long rx_missed_errors; /* recv'r missed packet */
+
+ /* detailed tx_errors */
+ u_long tx_aborted_errors;
+ u_long tx_carrier_errors;
+ u_long tx_fifo_errors;
+ u_long tx_heartbeat_errors;
+ u_long tx_window_errors;
+ };
+#endif
+
+/*
+ * Item in a list of interfaces.
+ */
+struct pcap_if {
+ struct pcap_if *next;
+ char *name; /* name to hand to "pcap_open_live()" */
+ char *description; /* textual description of interface, or NULL */
+ struct pcap_addr *addresses;
+ bpf_u_int32 flags; /* PCAP_IF_ interface flags */
+};
+
+#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */
+
+/*
+ * Representation of an interface address.
+ */
+struct pcap_addr {
+ struct pcap_addr *next;
+ struct sockaddr *addr; /* address */
+ struct sockaddr *netmask; /* netmask for that address */
+ struct sockaddr *broadaddr; /* broadcast address for that address */
+ struct sockaddr *dstaddr; /* P2P destination address for that address */
+};
+
+typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *,
+ const u_char *);
+
+char *pcap_lookupdev(char *);
+int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *);
+pcap_t *pcap_open_live(const char *, int, int, int, char *);
+pcap_t *pcap_open_dead(int, int);
+pcap_t *pcap_open_offline(const char *, char *);
+pcap_t *pcap_fopen_offline(FILE *, char *);
+void pcap_close(pcap_t *);
+int pcap_loop(pcap_t *, int, pcap_handler, u_char *);
+int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *);
+const u_char*
+ pcap_next(pcap_t *, struct pcap_pkthdr *);
+int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **);
+void pcap_breakloop(pcap_t *);
+int pcap_stats(pcap_t *, struct pcap_stat *);
+int pcap_setfilter(pcap_t *, struct bpf_program *);
+int pcap_setdirection(pcap_t *, pcap_direction_t);
+int pcap_getnonblock(pcap_t *, char *);
+int pcap_setnonblock(pcap_t *, int, char *);
+void pcap_perror(pcap_t *, char *);
+int pcap_inject(pcap_t *, const void *, size_t);
+int pcap_sendpacket(pcap_t *, const u_char *, int);
+char *pcap_strerror(int);
+char *pcap_geterr(pcap_t *);
+int pcap_compile(pcap_t *, struct bpf_program *, char *, int,
+ bpf_u_int32);
+int pcap_compile_nopcap(int, int, struct bpf_program *,
+ char *, int, bpf_u_int32);
+void pcap_freecode(struct bpf_program *);
+int pcap_datalink(pcap_t *);
+int pcap_list_datalinks(pcap_t *, int **);
+int pcap_set_datalink(pcap_t *, int);
+int pcap_datalink_name_to_val(const char *);
+const char *pcap_datalink_val_to_name(int);
+const char *pcap_datalink_val_to_description(int);
+int pcap_snapshot(pcap_t *);
+int pcap_is_swapped(pcap_t *);
+int pcap_major_version(pcap_t *);
+int pcap_minor_version(pcap_t *);
+
+/* XXX */
+FILE *pcap_file(pcap_t *);
+int pcap_fileno(pcap_t *);
+
+pcap_dumper_t *pcap_dump_open(pcap_t *, const char *);
+pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp);
+FILE *pcap_dump_file(pcap_dumper_t *);
+long pcap_dump_ftell(pcap_dumper_t *);
+int pcap_dump_flush(pcap_dumper_t *);
+void pcap_dump_close(pcap_dumper_t *);
+void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *);
+
+int pcap_findalldevs(pcap_if_t **, char *);
+void pcap_freealldevs(pcap_if_t *);
+
+const char *pcap_lib_version(void);
+
+/* XXX this guy lives in the bpf tree */
+u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
+int bpf_validate(struct bpf_insn *f, int len);
+char *bpf_image(struct bpf_insn *, int);
+void bpf_dump(struct bpf_program *, int);
+
+#if defined(WIN32)
+
+/*
+ * Win32 definitions
+ */
+
+int pcap_setbuff(pcap_t *p, int dim);
+int pcap_setmode(pcap_t *p, int mode);
+int pcap_setmintocopy(pcap_t *p, int size);
+
+#ifdef WPCAP
+/* Include file with the wpcap-specific extensions */
+#include <Win32-Extensions.h>
+#endif /* WPCAP */
+
+#define MODE_CAPT 0
+#define MODE_STAT 1
+#define MODE_MON 2
+
+#elif defined(MSDOS)
+
+/*
+ * MS-DOS definitions
+ */
+
+int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *);
+void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait);
+u_long pcap_mac_packets (void);
+
+#else /* UN*X */
+
+/*
+ * UN*X definitions
+ */
+
+int pcap_get_selectable_fd(pcap_t *);
+
+#endif /* WIN32/MSDOS/UN*X */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- * @(#) $Header: /tcpdump/master/libpcap/pcap1.h,v 1.2 2004-03-30 14:42:50 mcr Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/pcap1.h,v 1.3 2006-10-04 18:09:22 guy Exp $ (LBL)
*/
#ifndef lib_pcap_h
#endif /* WIN32 */
#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
-#include <pcap-bpf.h>
+#include <pcap/bpf.h>
#endif
#include <stdio.h>
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.145 2006-07-27 21:02:57 gianluca Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.146 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
* would have to read them.
*
- * and LINKTYPE_ value, as per the comment in pcap-bpf.h, and use the type
+ * and LINKTYPE_ value, as per the comment in pcap/bpf.h, and use the type
* you're given.
*/
#define LINKTYPE_USER0 147
#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/scanner.l,v 1.105 2005-11-09 23:49:30 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/scanner.l,v 1.106 2006-10-04 18:09:22 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#define AI_NUMERICHOST 0x04
#endif
#endif /*INET6*/
-#include <pcap-namedb.h>
+#include <pcap/namedb.h>
#include "tokdefs.h"
#ifdef HAVE_OS_PROTO_H
+++ /dev/null
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- * The Regents of the University of California. All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the University of
- * California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/Attic/sll.h,v 1.7 2002-06-11 17:04:48 itojun Exp $ (LBL)
- */
-
-/*
- * For captures on Linux cooked sockets, we construct a fake header
- * that includes:
- *
- * a 2-byte "packet type" which is one of:
- *
- * LINUX_SLL_HOST packet was sent to us
- * LINUX_SLL_BROADCAST packet was broadcast
- * LINUX_SLL_MULTICAST packet was multicast
- * LINUX_SLL_OTHERHOST packet was sent to somebody else
- * LINUX_SLL_OUTGOING packet was sent *by* us;
- *
- * a 2-byte Ethernet protocol field;
- *
- * a 2-byte link-layer type;
- *
- * a 2-byte link-layer address length;
- *
- * an 8-byte source link-layer address, whose actual length is
- * specified by the previous value.
- *
- * All fields except for the link-layer address are in network byte order.
- *
- * DO NOT change the layout of this structure, or change any of the
- * LINUX_SLL_ values below. If you must change the link-layer header
- * for a "cooked" Linux capture, introduce a new DLT_ type (ask
- * value that collides with a value already being used), and use the
- * new header in captures of that type, so that programs that can
- * handle DLT_LINUX_SLL captures will continue to handle them correctly
- * without any change, and so that capture files with different headers
- * can be told apart and programs that read them can dissect the
- * packets in them.
- */
-
-/*
- * A DLT_LINUX_SLL fake link-layer header.
- */
-#define SLL_HDR_LEN 16 /* total header length */
-#define SLL_ADDRLEN 8 /* length of address field */
-
-struct sll_header {
- u_int16_t sll_pkttype; /* packet type */
- u_int16_t sll_hatype; /* link-layer address type */
- u_int16_t sll_halen; /* link-layer address length */
- u_int8_t sll_addr[SLL_ADDRLEN]; /* link-layer address */
- u_int16_t sll_protocol; /* protocol */
-};
-
-/*
- * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the
- * PACKET_ values on Linux, but are defined here so that they're
- * available even on systems other than Linux, and so that they
- * don't change even if the PACKET_ values change.
- */
-#define LINUX_SLL_HOST 0
-#define LINUX_SLL_BROADCAST 1
-#define LINUX_SLL_MULTICAST 2
-#define LINUX_SLL_OTHERHOST 3
-#define LINUX_SLL_OUTGOING 4
-
-/*
- * The LINUX_SLL_ values for "sll_protocol"; these correspond to the
- * ETH_P_ values on Linux, but are defined here so that they're
- * available even on systems other than Linux. We assume, for now,
- * that the ETH_P_ values won't change in Linux; if they do, then:
- *
- * if we don't translate them in "pcap-linux.c", capture files
- * won't necessarily be readable if captured on a system that
- * defines ETH_P_ values that don't match these values;
- *
- * if we do translate them in "pcap-linux.c", that makes life
- * unpleasant for the BPF code generator, as the values you test
- * for in the kernel aren't the values that you test for when
- * reading a capture file, so the fixup code run on BPF programs
- * handed to the kernel ends up having to do more work.
- *
- * Add other values here as necessary, for handling packet types that
- * might show up on non-Ethernet, non-802.x networks. (Not all the ones
- * in the Linux "if_ether.h" will, I suspect, actually show up in
- * captures.)
- */
-#define LINUX_SLL_P_802_3 0x0001 /* Novell 802.3 frames without 802.2 LLC header */
-#define LINUX_SLL_P_802_2 0x0004 /* 802.2 frames (not D/I/X Ethernet) */
projects / libpcap / commitdiff
