X-Git-Url: https://git.tcpdump.org/libpcap/blobdiff_plain/92c5d33d7a89c624e90b55f95bb7fbc49ec06c5f..ade794238b623a81e2585d1c2073a3bececa10ae:/pcap-linux.c diff --git a/pcap-linux.c b/pcap-linux.c index 700dc95e..deabbc4a 100644 --- a/pcap-linux.c +++ b/pcap-linux.c @@ -30,11 +30,44 @@ * based on previous works of: * Simon Patarin * Phil Wood + * + * Monitor-mode support for mac80211 includes code taken from the iw + * command; the copyright notice for that code is + * + * Copyright (c) 2007, 2008 Johannes Berg + * Copyright (c) 2007 Andy Lutomirski + * Copyright (c) 2007 Mike Kershaw + * Copyright (c) 2008 Gábor Stefanik + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #ifndef lint static const char rcsid[] _U_ = - "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.132 2008-01-05 22:32:31 guy Exp $ (LBL)"; + "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.164 2008-12-14 22:00:57 guy Exp $ (LBL)"; #endif /* @@ -80,12 +113,59 @@ static const char rcsid[] _U_ = */ +#define _GNU_SOURCE + #ifdef HAVE_CONFIG_H #include "config.h" #endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef HAVE_LINUX_NET_TSTAMP_H +#include +#include +#endif + +/* + * Got Wireless Extensions? + */ +#ifdef HAVE_LINUX_WIRELESS_H +#include +#endif /* HAVE_LINUX_WIRELESS_H */ + +/* + * Got libnl? + */ +#ifdef HAVE_LIBNL +#include + +#include +#include +#include +#include +#include +#endif /* HAVE_LIBNL */ + #include "pcap-int.h" #include "pcap/sll.h" +#include "pcap/vlan.h" #ifdef HAVE_DAG_API #include "pcap-dag.h" @@ -95,6 +175,10 @@ static const char rcsid[] _U_ = #include "pcap-septel.h" #endif /* HAVE_SEPTEL_API */ +#ifdef HAVE_SNF_API +#include "pcap-snf.h" +#endif /* HAVE_SNF_API */ + #ifdef PCAP_SUPPORT_USB #include "pcap-usb-linux.h" #endif @@ -103,25 +187,10 @@ static const char rcsid[] _U_ = #include "pcap-bt-linux.h" #endif -#ifdef SITA -#include "pcap-sita.h" +#ifdef PCAP_SUPPORT_CAN +#include "pcap-can-linux.h" #endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - /* * If PF_PACKET is defined, we can use {SOCK_RAW,SOCK_DGRAM}/PF_PACKET * sockets rather than SOCK_PACKET sockets. @@ -162,6 +231,9 @@ static const char rcsid[] _U_ = */ # ifdef PACKET_HOST # define HAVE_PF_PACKET_SOCKETS +# ifdef PACKET_AUXDATA +# define HAVE_PACKET_AUXDATA +# endif /* PACKET_AUXDATA */ # endif /* PACKET_HOST */ @@ -170,6 +242,11 @@ static const char rcsid[] _U_ = * uses many ring related structs and macros */ # ifdef TPACKET_HDRLEN # define HAVE_PACKET_RING +# ifdef TPACKET2_HDRLEN +# define HAVE_TPACKET2 +# else +# define TPACKET_V1 0 +# endif /* TPACKET2_HDRLEN */ # endif /* TPACKET_HDRLEN */ #endif /* PF_PACKET */ @@ -178,7 +255,7 @@ static const char rcsid[] _U_ = #include #endif -#ifndef __GLIBC__ +#ifndef HAVE_SOCKLEN_T typedef int socklen_t; #endif @@ -214,31 +291,44 @@ typedef int socklen_t; #define BIGGER_THAN_ALL_MTUS (64*1024) /* - * Prototypes for internal functions + * Prototypes for internal functions and methods. */ static void map_arphrd_to_dlt(pcap_t *, int, int); +#ifdef HAVE_PF_PACKET_SOCKETS static short int map_packet_type_to_sll_type(short int); -static int live_open_old(pcap_t *, const char *, int, int, char *); -static int live_open_new(pcap_t *, const char *, int, int, char *); -static int live_open_mmap(pcap_t *, char *); +#endif +static int pcap_activate_linux(pcap_t *); +static int activate_old(pcap_t *); +static int activate_new(pcap_t *); +static int activate_mmap(pcap_t *, int *); +static int pcap_can_set_rfmon_linux(pcap_t *); static int pcap_read_linux(pcap_t *, int, pcap_handler, u_char *); static int pcap_read_packet(pcap_t *, pcap_handler, u_char *); static int pcap_inject_linux(pcap_t *, const void *, size_t); static int pcap_stats_linux(pcap_t *, struct pcap_stat *); static int pcap_setfilter_linux(pcap_t *, struct bpf_program *); static int pcap_setdirection_linux(pcap_t *, pcap_direction_t); -static void pcap_close_linux(pcap_t *); +static void pcap_cleanup_linux(pcap_t *); + +union thdr { + struct tpacket_hdr *h1; + struct tpacket2_hdr *h2; + void *raw; +}; #ifdef HAVE_PACKET_RING -#define RING_GET_FRAME(h) (((struct tpacket_hdr**)h->buffer)[handle->offset]) +#define RING_GET_FRAME(h) (((union thdr **)h->buffer)[h->offset]) static void destroy_ring(pcap_t *handle); -static int create_ring(pcap_t* handle, unsigned size, char* errmsg); -static void pcap_close_linux_mmap(pcap_t *); +static int create_ring(pcap_t *handle, int *status); +static int prepare_tpacket_socket(pcap_t *handle); +static void pcap_cleanup_linux_mmap(pcap_t *); static int pcap_read_linux_mmap(pcap_t *, int, pcap_handler , u_char *); static int pcap_setfilter_linux_mmap(pcap_t *, struct bpf_program *); static int pcap_setnonblock_mmap(pcap_t *p, int nonblock, char *errbuf); static int pcap_getnonblock_mmap(pcap_t *p, char *errbuf); +static void pcap_oneshot_mmap(u_char *user, const struct pcap_pkthdr *h, + const u_char *bytes); #endif /* @@ -251,11 +341,17 @@ static int iface_get_mtu(int fd, const char *device, char *ebuf); static int iface_get_arptype(int fd, const char *device, char *ebuf); #ifdef HAVE_PF_PACKET_SOCKETS static int iface_bind(int fd, int ifindex, char *ebuf); -#endif +#ifdef IW_MODE_MONITOR +static int has_wext(int sock_fd, const char *device, char *ebuf); +#endif /* IW_MODE_MONITOR */ +static int enter_rfmon_mode(pcap_t *handle, int sock_fd, + const char *device); +#endif /* HAVE_PF_PACKET_SOCKETS */ static int iface_bind_old(int fd, const char *device, char *ebuf); #ifdef SO_ATTACH_FILTER -static int fix_program(pcap_t *handle, struct sock_fprog *fcode); +static int fix_program(pcap_t *handle, struct sock_fprog *fcode, + int is_mapped); static int fix_offset(struct bpf_insn *p); static int set_kernel_filter(pcap_t *handle, struct sock_fprog *fcode); static int reset_kernel_filter(pcap_t *handle); @@ -266,289 +362,1014 @@ static struct sock_fprog total_fcode = { 1, &total_insn }; #endif -/* - * Get a handle for a live capture from the given device. You can - * pass NULL as device to get all packages (without link level - * information of course). If you pass 1 as promisc the interface - * will be set to promiscous mode (XXX: I think this usage should - * be deprecated and functions be added to select that later allow - * modification of that values -- Torsten). - * - * See also pcap(3). - */ pcap_t * -pcap_open_live(const char *device, int snaplen, int promisc, int to_ms, - char *ebuf) +pcap_create(const char *device, char *ebuf) { - pcap_t *handle; - int mtu; - int err; - int live_open_ok = 0; - struct utsname utsname; + pcap_t *handle; + + /* + * A null device name is equivalent to the "any" device. + */ + if (device == NULL) + device = "any"; #ifdef HAVE_DAG_API if (strstr(device, "dag")) { - return dag_open_live(device, snaplen, promisc, to_ms, ebuf); + return dag_create(device, ebuf); } #endif /* HAVE_DAG_API */ #ifdef HAVE_SEPTEL_API if (strstr(device, "septel")) { - return septel_open_live(device, snaplen, promisc, to_ms, ebuf); + return septel_create(device, ebuf); } #endif /* HAVE_SEPTEL_API */ +#ifdef HAVE_SNF_API + handle = snf_create(device, ebuf); + if (strstr(device, "snf") || handle != NULL) + return handle; + +#endif /* HAVE_SNF_API */ + #ifdef PCAP_SUPPORT_BT if (strstr(device, "bluetooth")) { - return bt_open_live(device, snaplen, promisc, to_ms, ebuf); + return bt_create(device, ebuf); + } +#endif + +#ifdef PCAP_SUPPORT_CAN + if (strstr(device, "can") || strstr(device, "vcan")) { + return can_create(device, ebuf); } #endif #ifdef PCAP_SUPPORT_USB - if (strstr(device, "usb")) { - return usb_open_live(device, snaplen, promisc, to_ms, ebuf); + if (strstr(device, "usbmon")) { + return usb_create(device, ebuf); } #endif - /* Allocate a handle for this session. */ + handle = pcap_create_common(device, ebuf); + if (handle == NULL) + return NULL; - handle = malloc(sizeof(*handle)); - if (handle == NULL) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s", - pcap_strerror(errno)); + handle->activate_op = pcap_activate_linux; + handle->can_set_rfmon_op = pcap_can_set_rfmon_linux; +#if defined(HAVE_LINUX_NET_TSTAMP_H) && defined(PACKET_TIMESTAMP) + /* + * We claim that we support: + * + * software time stamps, with no details about their precision; + * hardware time stamps, synced to the host time; + * hardware time stamps, not synced to the host time. + * + * XXX - we can't ask a device whether it supports + * hardware time stamps, so we just claim all devices do. + */ + handle->tstamp_type_count = 3; + handle->tstamp_type_list = malloc(3 * sizeof(u_int)); + if (handle->tstamp_type_list == NULL) { + free(handle); return NULL; } + handle->tstamp_type_list[0] = PCAP_TSTAMP_HOST; + handle->tstamp_type_list[1] = PCAP_TSTAMP_ADAPTER; + handle->tstamp_type_list[2] = PCAP_TSTAMP_ADAPTER_UNSYNCED; +#endif - /* Initialize some components of the pcap structure. */ - - memset(handle, 0, sizeof(*handle)); - handle->snapshot = snaplen; - handle->md.timeout = to_ms; + return handle; +} - handle->inject_op = pcap_inject_linux; - handle->setfilter_op = pcap_setfilter_linux; - handle->setdirection_op = pcap_setdirection_linux; - handle->set_datalink_op = NULL; /* can't change data link type */ - handle->getnonblock_op = pcap_getnonblock_fd; - handle->setnonblock_op = pcap_setnonblock_fd; - handle->close_op = pcap_close_linux; +#ifdef HAVE_LIBNL +/* + * If interface {if} is a mac80211 driver, the file + * /sys/class/net/{if}/phy80211 is a symlink to + * /sys/class/ieee80211/{phydev}, for some {phydev}. + * + * On Fedora 9, with a 2.6.26.3-29 kernel, my Zydas stick, at + * least, has a "wmaster0" device and a "wlan0" device; the + * latter is the one with the IP address. Both show up in + * "tcpdump -D" output. Capturing on the wmaster0 device + * captures with 802.11 headers. + * + * airmon-ng searches through /sys/class/net for devices named + * monN, starting with mon0; as soon as one *doesn't* exist, + * it chooses that as the monitor device name. If the "iw" + * command exists, it does "iw dev {if} interface add {monif} + * type monitor", where {monif} is the monitor device. It + * then (sigh) sleeps .1 second, and then configures the + * device up. Otherwise, if /sys/class/ieee80211/{phydev}/add_iface + * is a file, it writes {mondev}, without a newline, to that file, + * and again (sigh) sleeps .1 second, and then iwconfig's that + * device into monitor mode and configures it up. Otherwise, + * you can't do monitor mode. + * + * All these devices are "glued" together by having the + * /sys/class/net/{device}/phy80211 links pointing to the same + * place, so, given a wmaster, wlan, or mon device, you can + * find the other devices by looking for devices with + * the same phy80211 link. + * + * To turn monitor mode off, delete the monitor interface, + * either with "iw dev {monif} interface del" or by sending + * {monif}, with no NL, down /sys/class/ieee80211/{phydev}/remove_iface + * + * Note: if you try to create a monitor device named "monN", and + * there's already a "monN" device, it fails, as least with + * the netlink interface (which is what iw uses), with a return + * value of -ENFILE. (Return values are negative errnos.) We + * could probably use that to find an unused device. + * + * Yes, you can have multiple monitor devices for a given + * physical device. +*/ -#ifdef SITA - handle->read_op = pcap_read_acn; - handle->stats_op = pcap_stats_acn; -#else - handle->read_op = pcap_read_linux; - handle->stats_op = pcap_stats_linux; -#endif +/* + * Is this a mac80211 device? If so, fill in the physical device path and + * return 1; if not, return 0. On an error, fill in handle->errbuf and + * return PCAP_ERROR. + */ +static int +get_mac80211_phydev(pcap_t *handle, const char *device, char *phydev_path, + size_t phydev_max_pathlen) +{ + char *pathstr; + ssize_t bytes_read; /* - * NULL and "any" are special devices which give us the hint to - * monitor all devices. + * Generate the path string for the symlink to the physical device. */ - if (!device || strcmp(device, "any") == 0) { - device = NULL; - handle->md.device = strdup("any"); - if (promisc) { - promisc = 0; - /* Just a warning. */ - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "Promiscuous mode not supported on the \"any\" device"); + if (asprintf(&pathstr, "/sys/class/net/%s/phy80211", device) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: Can't generate path name string for /sys/class/net device", + device); + return PCAP_ERROR; + } + bytes_read = readlink(pathstr, phydev_path, phydev_max_pathlen); + if (bytes_read == -1) { + if (errno == ENOENT || errno == EINVAL) { + /* + * Doesn't exist, or not a symlink; assume that + * means it's not a mac80211 device. + */ + free(pathstr); + return 0; } + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: Can't readlink %s: %s", device, pathstr, + strerror(errno)); + free(pathstr); + return PCAP_ERROR; + } + free(pathstr); + phydev_path[bytes_read] = '\0'; + return 1; +} - } else - handle->md.device = strdup(device); +#ifndef HAVE_LIBNL_2_x +/* libnl 2.x compatibility code */ - if (handle->md.device == NULL) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, "strdup: %s", - pcap_strerror(errno) ); - free(handle); - return NULL; - } +#define nl_sock nl_handle - /* - * Current Linux kernels use the protocol family PF_PACKET to - * allow direct access to all packets on the network while - * older kernels had a special socket type SOCK_PACKET to - * implement this feature. - * While this old implementation is kind of obsolete we need - * to be compatible with older kernels for a while so we are - * trying both methods with the newer method preferred. - */ +static inline struct nl_handle * +nl_socket_alloc(void) +{ + return nl_handle_alloc(); +} -#ifdef SITA - live_open_ok = acn_open_live((unsigned char *)device, ebuf, &handle->linktype); - handle->md.clear_promisc = promisc; - handle->fd = live_open_ok; - handle->bufsize = handle->snapshot; -#else - if ((err = live_open_new(handle, device, promisc, to_ms, ebuf)) == 1) { - live_open_ok = 1; - if (live_open_mmap(handle, ebuf) == 1) - return handle; - } - else if (err == 0) { - /* Non-fatal error; try old way */ - if (live_open_old(handle, device, promisc, to_ms, ebuf)) - live_open_ok = 1; - } -#endif - if (!live_open_ok) { - /* - * Both methods to open the packet socket failed. Tidy - * up and report our failure (ebuf is expected to be - * set by the functions above). - */ +static inline void +nl_socket_free(struct nl_handle *h) +{ + nl_handle_destroy(h); +} - if (handle->md.device != NULL) - free(handle->md.device); - free(handle); - return NULL; +static inline int +__genl_ctrl_alloc_cache(struct nl_handle *h, struct nl_cache **cache) +{ + struct nl_cache *tmp = genl_ctrl_alloc_cache(h); + if (!tmp) + return -ENOMEM; + *cache = tmp; + return 0; +} +#define genl_ctrl_alloc_cache __genl_ctrl_alloc_cache +#endif /* !HAVE_LIBNL_2_x */ + +struct nl80211_state { + struct nl_sock *nl_sock; + struct nl_cache *nl_cache; + struct genl_family *nl80211; +}; + +static int +nl80211_init(pcap_t *handle, struct nl80211_state *state, const char *device) +{ + int err; + + state->nl_sock = nl_socket_alloc(); + if (!state->nl_sock) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: failed to allocate netlink handle", device); + return PCAP_ERROR; } -#ifndef SITA - /* - * Compute the buffer size. - * - * If we're using SOCK_PACKET, this might be a 2.0[.x] kernel, - * and might require special handling - check. - */ - if (handle->md.sock_packet && (uname(&utsname) < 0 || - strncmp(utsname.release, "2.0", 3) == 0)) { - /* - * We're using a SOCK_PACKET structure, and either - * we couldn't find out what kernel release this is, - * or it's a 2.0[.x] kernel. - * - * In the 2.0[.x] kernel, a "recvfrom()" on - * a SOCK_PACKET socket, with MSG_TRUNC set, will - * return the number of bytes read, so if we pass - * a length based on the snapshot length, it'll - * return the number of bytes from the packet - * copied to userland, not the actual length - * of the packet. - * - * This means that, for example, the IP dissector - * in tcpdump will get handed a packet length less - * than the length in the IP header, and will - * complain about "truncated-ip". - * - * So we don't bother trying to copy from the - * kernel only the bytes in which we're interested, - * but instead copy them all, just as the older - * versions of libpcap for Linux did. - * - * The buffer therefore needs to be big enough to - * hold the largest packet we can get from this - * device. Unfortunately, we can't get the MRU - * of the network; we can only get the MTU. The - * MTU may be too small, in which case a packet larger - * than the buffer size will be truncated *and* we - * won't get the actual packet size. - * - * However, if the snapshot length is larger than - * the buffer size based on the MTU, we use the - * snapshot length as the buffer size, instead; - * this means that with a sufficiently large snapshot - * length we won't artificially truncate packets - * to the MTU-based size. - * - * This mess just one of many problems with packet - * capture on 2.0[.x] kernels; you really want a - * 2.2[.x] or later kernel if you want packet capture - * to work well. - */ - mtu = iface_get_mtu(handle->fd, device, ebuf); - if (mtu == -1) { - pcap_close_linux(handle); - free(handle); - return NULL; - } - handle->bufsize = MAX_LINKHEADER_SIZE + mtu; - if (handle->bufsize < handle->snapshot) - handle->bufsize = handle->snapshot; - } else { - /* - * This is a 2.2[.x] or later kernel (we know that - * either because we're not using a SOCK_PACKET - * socket - PF_PACKET is supported only in 2.2 - * and later kernels - or because we checked the - * kernel version). - * - * We can safely pass "recvfrom()" a byte count - * based on the snapshot length. - * - * If we're in cooked mode, make the snapshot length - * large enough to hold a "cooked mode" header plus - * 1 byte of packet data (so we don't pass a byte - * count of 0 to "recvfrom()"). - */ - if (handle->md.cooked) { - if (handle->snapshot < SLL_HDR_LEN + 1) - handle->snapshot = SLL_HDR_LEN + 1; - } - handle->bufsize = handle->snapshot; + if (genl_connect(state->nl_sock)) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: failed to connect to generic netlink", device); + goto out_handle_destroy; } -#endif - /* Allocate the buffer */ + err = genl_ctrl_alloc_cache(state->nl_sock, &state->nl_cache); + if (err < 0) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: failed to allocate generic netlink cache: %s", + device, strerror(-err)); + goto out_handle_destroy; + } - handle->buffer = malloc(handle->bufsize + handle->offset); - if (!handle->buffer) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "malloc: %s", pcap_strerror(errno)); - pcap_close_linux(handle); - free(handle); - return NULL; + state->nl80211 = genl_ctrl_search_by_name(state->nl_cache, "nl80211"); + if (!state->nl80211) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl80211 not found", device); + goto out_cache_free; } - /* - * "handle->fd" is a socket, so "select()" and "poll()" - * should work on it. - */ - handle->selectable_fd = handle->fd; + return 0; - return handle; +out_cache_free: + nl_cache_free(state->nl_cache); +out_handle_destroy: + nl_socket_free(state->nl_sock); + return PCAP_ERROR; } -/* - * Read at most max_packets from the capture stream and call the callback - * for each of them. Returns the number of packets handled or -1 if an - * error occured. - */ -static int -pcap_read_linux(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user) +static void +nl80211_cleanup(struct nl80211_state *state) { - /* - * Currently, on Linux only one packet is delivered per read, - * so we don't loop. - */ - return pcap_read_packet(handle, callback, user); + genl_family_put(state->nl80211); + nl_cache_free(state->nl_cache); + nl_socket_free(state->nl_sock); } -/* - * Read a packet from the socket calling the handler provided by - * the user. Returns the number of packets received or -1 if an - * error occured. - */ static int -pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata) +add_mon_if(pcap_t *handle, int sock_fd, struct nl80211_state *state, + const char *device, const char *mondevice) { - u_char *bp; - int offset; -#ifdef HAVE_PF_PACKET_SOCKETS - struct sockaddr_ll from; - struct sll_header *hdrp; -#else - struct sockaddr from; -#endif - socklen_t fromlen; - int packet_len, caplen; - struct pcap_pkthdr pcap_header; + int ifindex; + struct nl_msg *msg; + int err; + + ifindex = iface_get_id(sock_fd, device, handle->errbuf); + if (ifindex == -1) + return PCAP_ERROR; + + msg = nlmsg_alloc(); + if (!msg) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: failed to allocate netlink msg", device); + return PCAP_ERROR; + } -#ifdef HAVE_PF_PACKET_SOCKETS - /* - * If this is a cooked device, leave extra room for a - * fake packet header. + genlmsg_put(msg, 0, 0, genl_family_get_id(state->nl80211), 0, + 0, NL80211_CMD_NEW_INTERFACE, 0); + NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, ifindex); + NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, mondevice); + NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, NL80211_IFTYPE_MONITOR); + + err = nl_send_auto_complete(state->nl_sock, msg); + if (err < 0) { + if (err == -ENFILE) { + /* + * Device not available; our caller should just + * keep trying. + */ + nlmsg_free(msg); + return 0; + } else { + /* + * Real failure, not just "that device is not + * available. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_send_auto_complete failed adding %s interface: %s", + device, mondevice, strerror(-err)); + nlmsg_free(msg); + return PCAP_ERROR; + } + } + err = nl_wait_for_ack(state->nl_sock); + if (err < 0) { + if (err == -ENFILE) { + /* + * Device not available; our caller should just + * keep trying. + */ + nlmsg_free(msg); + return 0; + } else { + /* + * Real failure, not just "that device is not + * available. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_wait_for_ack failed adding %s interface: %s", + device, mondevice, strerror(-err)); + nlmsg_free(msg); + return PCAP_ERROR; + } + } + + /* + * Success. + */ + nlmsg_free(msg); + return 1; + +nla_put_failure: + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_put failed adding %s interface", + device, mondevice); + nlmsg_free(msg); + return PCAP_ERROR; +} + +static int +del_mon_if(pcap_t *handle, int sock_fd, struct nl80211_state *state, + const char *device, const char *mondevice) +{ + int ifindex; + struct nl_msg *msg; + int err; + + ifindex = iface_get_id(sock_fd, mondevice, handle->errbuf); + if (ifindex == -1) + return PCAP_ERROR; + + msg = nlmsg_alloc(); + if (!msg) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: failed to allocate netlink msg", device); + return PCAP_ERROR; + } + + genlmsg_put(msg, 0, 0, genl_family_get_id(state->nl80211), 0, + 0, NL80211_CMD_DEL_INTERFACE, 0); + NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, ifindex); + + err = nl_send_auto_complete(state->nl_sock, msg); + if (err < 0) { + if (err == -ENFILE) { + /* + * Device not available; our caller should just + * keep trying. + */ + nlmsg_free(msg); + return 0; + } else { + /* + * Real failure, not just "that device is not + * available. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_send_auto_complete failed deleting %s interface: %s", + device, mondevice, strerror(-err)); + nlmsg_free(msg); + return PCAP_ERROR; + } + } + err = nl_wait_for_ack(state->nl_sock); + if (err < 0) { + if (err == -ENFILE) { + /* + * Device not available; our caller should just + * keep trying. + */ + nlmsg_free(msg); + return 0; + } else { + /* + * Real failure, not just "that device is not + * available. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_wait_for_ack failed adding %s interface: %s", + device, mondevice, strerror(-err)); + nlmsg_free(msg); + return PCAP_ERROR; + } + } + + /* + * Success. + */ + nlmsg_free(msg); + return 1; + +nla_put_failure: + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: nl_put failed deleting %s interface", + device, mondevice); + nlmsg_free(msg); + return PCAP_ERROR; +} + +static int +enter_rfmon_mode_mac80211(pcap_t *handle, int sock_fd, const char *device) +{ + int ret; + char phydev_path[PATH_MAX+1]; + struct nl80211_state nlstate; + struct ifreq ifr; + u_int n; + + /* + * Is this a mac80211 device? + */ + ret = get_mac80211_phydev(handle, device, phydev_path, PATH_MAX); + if (ret < 0) + return ret; /* error */ + if (ret == 0) + return 0; /* no error, but not mac80211 device */ + + /* + * XXX - is this already a monN device? + * If so, we're done. + * Is that determined by old Wireless Extensions ioctls? + */ + + /* + * OK, it's apparently a mac80211 device. + * Try to find an unused monN device for it. + */ + ret = nl80211_init(handle, &nlstate, device); + if (ret != 0) + return ret; + for (n = 0; n < UINT_MAX; n++) { + /* + * Try mon{n}. + */ + char mondevice[3+10+1]; /* mon{UINT_MAX}\0 */ + + snprintf(mondevice, sizeof mondevice, "mon%u", n); + ret = add_mon_if(handle, sock_fd, &nlstate, device, mondevice); + if (ret == 1) { + handle->md.mondevice = strdup(mondevice); + goto added; + } + if (ret < 0) { + /* + * Hard failure. Just return ret; handle->errbuf + * has already been set. + */ + nl80211_cleanup(&nlstate); + return ret; + } + } + + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: No free monN interfaces", device); + nl80211_cleanup(&nlstate); + return PCAP_ERROR; + +added: + +#if 0 + /* + * Sleep for .1 seconds. + */ + delay.tv_sec = 0; + delay.tv_nsec = 500000000; + nanosleep(&delay, NULL); +#endif + + /* + * Now configure the monitor interface up. + */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(ifr.ifr_name, handle->md.mondevice, sizeof(ifr.ifr_name)); + if (ioctl(sock_fd, SIOCGIFFLAGS, &ifr) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: Can't get flags for %s: %s", device, + handle->md.mondevice, strerror(errno)); + del_mon_if(handle, sock_fd, &nlstate, device, + handle->md.mondevice); + nl80211_cleanup(&nlstate); + return PCAP_ERROR; + } + ifr.ifr_flags |= IFF_UP|IFF_RUNNING; + if (ioctl(sock_fd, SIOCSIFFLAGS, &ifr) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: Can't set flags for %s: %s", device, + handle->md.mondevice, strerror(errno)); + del_mon_if(handle, sock_fd, &nlstate, device, + handle->md.mondevice); + nl80211_cleanup(&nlstate); + return PCAP_ERROR; + } + + /* + * Success. Clean up the libnl state. + */ + nl80211_cleanup(&nlstate); + + /* + * Note that we have to delete the monitor device when we close + * the handle. + */ + handle->md.must_do_on_close |= MUST_DELETE_MONIF; + + /* + * Add this to the list of pcaps to close when we exit. + */ + pcap_add_to_pcaps_to_close(handle); + + return 1; +} +#endif /* HAVE_LIBNL */ + +static int +pcap_can_set_rfmon_linux(pcap_t *handle) +{ +#ifdef HAVE_LIBNL + char phydev_path[PATH_MAX+1]; + int ret; +#endif +#ifdef IW_MODE_MONITOR + int sock_fd; + struct iwreq ireq; +#endif + + if (strcmp(handle->opt.source, "any") == 0) { + /* + * Monitor mode makes no sense on the "any" device. + */ + return 0; + } + +#ifdef HAVE_LIBNL + /* + * Bleah. There doesn't seem to be a way to ask a mac80211 + * device, through libnl, whether it supports monitor mode; + * we'll just check whether the device appears to be a + * mac80211 device and, if so, assume the device supports + * monitor mode. + * + * wmaster devices don't appear to support the Wireless + * Extensions, but we can create a mon device for a + * wmaster device, so we don't bother checking whether + * a mac80211 device supports the Wireless Extensions. + */ + ret = get_mac80211_phydev(handle, handle->opt.source, phydev_path, + PATH_MAX); + if (ret < 0) + return ret; /* error */ + if (ret == 1) + return 1; /* mac80211 device */ +#endif + +#ifdef IW_MODE_MONITOR + /* + * Bleah. There doesn't appear to be an ioctl to use to ask + * whether a device supports monitor mode; we'll just do + * SIOCGIWMODE and, if it succeeds, assume the device supports + * monitor mode. + * + * Open a socket on which to attempt to get the mode. + * (We assume that if we have Wireless Extensions support + * we also have PF_PACKET support.) + */ + sock_fd = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); + if (sock_fd == -1) { + (void)snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "socket: %s", pcap_strerror(errno)); + return PCAP_ERROR; + } + + /* + * Attempt to get the current mode. + */ + strncpy(ireq.ifr_ifrn.ifrn_name, handle->opt.source, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + if (ioctl(sock_fd, SIOCGIWMODE, &ireq) != -1) { + /* + * Well, we got the mode; assume we can set it. + */ + close(sock_fd); + return 1; + } + if (errno == ENODEV) { + /* The device doesn't even exist. */ + (void)snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "SIOCGIWMODE failed: %s", pcap_strerror(errno)); + close(sock_fd); + return PCAP_ERROR_NO_SUCH_DEVICE; + } + close(sock_fd); +#endif + return 0; +} + +/* + * Grabs the number of dropped packets by the interface from /proc/net/dev. + * + * XXX - what about /sys/class/net/{interface name}/rx_*? There are + * individual devices giving, in ASCII, various rx_ and tx_ statistics. + * + * Or can we get them in binary form from netlink? + */ +static long int +linux_if_drops(const char * if_name) +{ + char buffer[512]; + char * bufptr; + FILE * file; + int field_to_convert = 3, if_name_sz = strlen(if_name); + long int dropped_pkts = 0; + + file = fopen("/proc/net/dev", "r"); + if (!file) + return 0; + + while (!dropped_pkts && fgets( buffer, sizeof(buffer), file )) + { + /* search for 'bytes' -- if its in there, then + that means we need to grab the fourth field. otherwise + grab the third field. */ + if (field_to_convert != 4 && strstr(buffer, "bytes")) + { + field_to_convert = 4; + continue; + } + + /* find iface and make sure it actually matches -- space before the name and : after it */ + if ((bufptr = strstr(buffer, if_name)) && + (bufptr == buffer || *(bufptr-1) == ' ') && + *(bufptr + if_name_sz) == ':') + { + bufptr = bufptr + if_name_sz + 1; + + /* grab the nth field from it */ + while( --field_to_convert && *bufptr != '\0') + { + while (*bufptr != '\0' && *(bufptr++) == ' '); + while (*bufptr != '\0' && *(bufptr++) != ' '); + } + + /* get rid of any final spaces */ + while (*bufptr != '\0' && *bufptr == ' ') bufptr++; + + if (*bufptr != '\0') + dropped_pkts = strtol(bufptr, NULL, 10); + + break; + } + } + + fclose(file); + return dropped_pkts; +} + + +/* + * With older kernels promiscuous mode is kind of interesting because we + * have to reset the interface before exiting. The problem can't really + * be solved without some daemon taking care of managing usage counts. + * If we put the interface into promiscuous mode, we set a flag indicating + * that we must take it out of that mode when the interface is closed, + * and, when closing the interface, if that flag is set we take it out + * of promiscuous mode. + * + * Even with newer kernels, we have the same issue with rfmon mode. + */ + +static void pcap_cleanup_linux( pcap_t *handle ) +{ + struct ifreq ifr; +#ifdef HAVE_LIBNL + struct nl80211_state nlstate; + int ret; +#endif /* HAVE_LIBNL */ +#ifdef IW_MODE_MONITOR + struct iwreq ireq; +#endif /* IW_MODE_MONITOR */ + + if (handle->md.must_do_on_close != 0) { + /* + * There's something we have to do when closing this + * pcap_t. + */ + if (handle->md.must_do_on_close & MUST_CLEAR_PROMISC) { + /* + * We put the interface into promiscuous mode; + * take it out of promiscuous mode. + * + * XXX - if somebody else wants it in promiscuous + * mode, this code cannot know that, so it'll take + * it out of promiscuous mode. That's not fixable + * in 2.0[.x] kernels. + */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(ifr.ifr_name, handle->md.device, + sizeof(ifr.ifr_name)); + if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) { + fprintf(stderr, + "Can't restore interface flags (SIOCGIFFLAGS failed: %s).\n" + "Please adjust manually.\n" + "Hint: This can't happen with Linux >= 2.2.0.\n", + strerror(errno)); + } else { + if (ifr.ifr_flags & IFF_PROMISC) { + /* + * Promiscuous mode is currently on; + * turn it off. + */ + ifr.ifr_flags &= ~IFF_PROMISC; + if (ioctl(handle->fd, SIOCSIFFLAGS, + &ifr) == -1) { + fprintf(stderr, + "Can't restore interface flags (SIOCSIFFLAGS failed: %s).\n" + "Please adjust manually.\n" + "Hint: This can't happen with Linux >= 2.2.0.\n", + strerror(errno)); + } + } + } + } + +#ifdef HAVE_LIBNL + if (handle->md.must_do_on_close & MUST_DELETE_MONIF) { + ret = nl80211_init(handle, &nlstate, handle->md.device); + if (ret >= 0) { + ret = del_mon_if(handle, handle->fd, &nlstate, + handle->md.device, handle->md.mondevice); + nl80211_cleanup(&nlstate); + } + if (ret < 0) { + fprintf(stderr, + "Can't delete monitor interface %s (%s).\n" + "Please delete manually.\n", + handle->md.mondevice, handle->errbuf); + } + } +#endif /* HAVE_LIBNL */ + +#ifdef IW_MODE_MONITOR + if (handle->md.must_do_on_close & MUST_CLEAR_RFMON) { + /* + * We put the interface into rfmon mode; + * take it out of rfmon mode. + * + * XXX - if somebody else wants it in rfmon + * mode, this code cannot know that, so it'll take + * it out of rfmon mode. + */ + strncpy(ireq.ifr_ifrn.ifrn_name, handle->md.device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] + = 0; + ireq.u.mode = handle->md.oldmode; + if (ioctl(handle->fd, SIOCSIWMODE, &ireq) == -1) { + /* + * Scientist, you've failed. + */ + fprintf(stderr, + "Can't restore interface wireless mode (SIOCSIWMODE failed: %s).\n" + "Please adjust manually.\n", + strerror(errno)); + } + } +#endif /* IW_MODE_MONITOR */ + + /* + * Take this pcap out of the list of pcaps for which we + * have to take the interface out of some mode. + */ + pcap_remove_from_pcaps_to_close(handle); + } + + if (handle->md.mondevice != NULL) { + free(handle->md.mondevice); + handle->md.mondevice = NULL; + } + if (handle->md.device != NULL) { + free(handle->md.device); + handle->md.device = NULL; + } + pcap_cleanup_live_common(handle); +} + +/* + * Get a handle for a live capture from the given device. You can + * pass NULL as device to get all packages (without link level + * information of course). If you pass 1 as promisc the interface + * will be set to promiscous mode (XXX: I think this usage should + * be deprecated and functions be added to select that later allow + * modification of that values -- Torsten). + */ +static int +pcap_activate_linux(pcap_t *handle) +{ + const char *device; + int status = 0; + + device = handle->opt.source; + + handle->inject_op = pcap_inject_linux; + handle->setfilter_op = pcap_setfilter_linux; + handle->setdirection_op = pcap_setdirection_linux; + handle->set_datalink_op = NULL; /* can't change data link type */ + handle->getnonblock_op = pcap_getnonblock_fd; + handle->setnonblock_op = pcap_setnonblock_fd; + handle->cleanup_op = pcap_cleanup_linux; + handle->read_op = pcap_read_linux; + handle->stats_op = pcap_stats_linux; + + /* + * The "any" device is a special device which causes us not + * to bind to a particular device and thus to look at all + * devices. + */ + if (strcmp(device, "any") == 0) { + if (handle->opt.promisc) { + handle->opt.promisc = 0; + /* Just a warning. */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "Promiscuous mode not supported on the \"any\" device"); + status = PCAP_WARNING_PROMISC_NOTSUP; + } + } + + handle->md.device = strdup(device); + if (handle->md.device == NULL) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "strdup: %s", + pcap_strerror(errno) ); + return PCAP_ERROR; + } + + /* + * If we're in promiscuous mode, then we probably want + * to see when the interface drops packets too, so get an + * initial count from /proc/net/dev + */ + if (handle->opt.promisc) + handle->md.proc_dropped = linux_if_drops(handle->md.device); + + /* + * Current Linux kernels use the protocol family PF_PACKET to + * allow direct access to all packets on the network while + * older kernels had a special socket type SOCK_PACKET to + * implement this feature. + * While this old implementation is kind of obsolete we need + * to be compatible with older kernels for a while so we are + * trying both methods with the newer method preferred. + */ + status = activate_new(handle); + if (status < 0) { + /* + * Fatal error with the new way; just fail. + * status has the error return; if it's PCAP_ERROR, + * handle->errbuf has been set appropriately. + */ + goto fail; + } + if (status == 1) { + /* + * Success. + * Try to use memory-mapped access. + */ + switch (activate_mmap(handle, &status)) { + + case 1: + /* + * We succeeded. status has been + * set to the status to return, + * which might be 0, or might be + * a PCAP_WARNING_ value. + */ + return status; + + case 0: + /* + * Kernel doesn't support it - just continue + * with non-memory-mapped access. + */ + break; + + case -1: + /* + * We failed to set up to use it, or the kernel + * supports it, but we failed to enable it. + * status has been set to the error status to + * return and, if it's PCAP_ERROR, handle->errbuf + * contains the error message. + */ + goto fail; + } + } + else if (status == 0) { + /* Non-fatal error; try old way */ + if ((status = activate_old(handle)) != 1) { + /* + * Both methods to open the packet socket failed. + * Tidy up and report our failure (handle->errbuf + * is expected to be set by the functions above). + */ + goto fail; + } + } + + /* + * We set up the socket, but not with memory-mapped access. + */ + status = 0; + if (handle->opt.buffer_size != 0) { + /* + * Set the socket buffer size to the specified value. + */ + if (setsockopt(handle->fd, SOL_SOCKET, SO_RCVBUF, + &handle->opt.buffer_size, + sizeof(handle->opt.buffer_size)) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "SO_RCVBUF: %s", pcap_strerror(errno)); + status = PCAP_ERROR; + goto fail; + } + } + + /* Allocate the buffer */ + + handle->buffer = malloc(handle->bufsize + handle->offset); + if (!handle->buffer) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "malloc: %s", pcap_strerror(errno)); + status = PCAP_ERROR; + goto fail; + } + + /* + * "handle->fd" is a socket, so "select()" and "poll()" + * should work on it. + */ + handle->selectable_fd = handle->fd; + + return status; + +fail: + pcap_cleanup_linux(handle); + return status; +} + +/* + * Read at most max_packets from the capture stream and call the callback + * for each of them. Returns the number of packets handled or -1 if an + * error occured. + */ +static int +pcap_read_linux(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user) +{ + /* + * Currently, on Linux only one packet is delivered per read, + * so we don't loop. + */ + return pcap_read_packet(handle, callback, user); +} + +/* + * Read a packet from the socket calling the handler provided by + * the user. Returns the number of packets received or -1 if an + * error occured. + */ +static int +pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata) +{ + u_char *bp; + int offset; +#ifdef HAVE_PF_PACKET_SOCKETS + struct sockaddr_ll from; + struct sll_header *hdrp; +#else + struct sockaddr from; +#endif +#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) + struct iovec iov; + struct msghdr msg; + struct cmsghdr *cmsg; + union { + struct cmsghdr cmsg; + char buf[CMSG_SPACE(sizeof(struct tpacket_auxdata))]; + } cmsg_buf; +#else /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ + socklen_t fromlen; +#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ + int packet_len, caplen; + struct pcap_pkthdr pcap_header; + +#ifdef HAVE_PF_PACKET_SOCKETS + /* + * If this is a cooked device, leave extra room for a + * fake packet header. */ if (handle->md.cooked) offset = SLL_HDR_LEN; @@ -562,38 +1383,85 @@ pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata) offset = 0; #endif - /* Receive a single packet from the kernel */ - + /* + * Receive a single packet from the kernel. + * We ignore EINTR, as that might just be due to a signal + * being delivered - if the signal should interrupt the + * loop, the signal handler should call pcap_breakloop() + * to set handle->break_loop (we ignore it on other + * platforms as well). + * We also ignore ENETDOWN, so that we can continue to + * capture traffic if the interface goes down and comes + * back up again; comments in the kernel indicate that + * we'll just block waiting for packets if we try to + * receive from a socket that delivered ENETDOWN, and, + * if we're using a memory-mapped buffer, we won't even + * get notified of "network down" events. + */ bp = handle->buffer + handle->offset; + +#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) + msg.msg_name = &from; + msg.msg_namelen = sizeof(from); + msg.msg_iov = &iov; + msg.msg_iovlen = 1; + msg.msg_control = &cmsg_buf; + msg.msg_controllen = sizeof(cmsg_buf); + msg.msg_flags = 0; + + iov.iov_len = handle->bufsize - offset; + iov.iov_base = bp + offset; +#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ + do { /* * Has "pcap_breakloop()" been called? */ if (handle->break_loop) { /* - * Yes - clear the flag that indicates that it - * has, and return -2 as an indication that we - * were told to break out of the loop. + * Yes - clear the flag that indicates that it has, + * and return PCAP_ERROR_BREAK as an indication that + * we were told to break out of the loop. */ handle->break_loop = 0; - return -2; + return PCAP_ERROR_BREAK; } + +#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) + packet_len = recvmsg(handle->fd, &msg, MSG_TRUNC); +#else /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ fromlen = sizeof(from); packet_len = recvfrom( handle->fd, bp + offset, handle->bufsize - offset, MSG_TRUNC, (struct sockaddr *) &from, &fromlen); +#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ } while (packet_len == -1 && errno == EINTR); /* Check if an error occured */ if (packet_len == -1) { - if (errno == EAGAIN) + switch (errno) { + + case EAGAIN: return 0; /* no packet there */ - else { - snprintf(handle->errbuf, sizeof(handle->errbuf), + + case ENETDOWN: + /* + * The device on which we're capturing went away. + * + * XXX - we should really return + * PCAP_ERROR_IFACE_NOT_UP, but pcap_dispatch() + * etc. aren't defined to return that. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "The interface went down"); + return PCAP_ERROR; + + default: + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "recvfrom: %s", pcap_strerror(errno)); - return -1; + return PCAP_ERROR; } } @@ -668,7 +1536,37 @@ pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata) from.sll_halen); hdrp->sll_protocol = from.sll_protocol; } -#endif + +#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) + for (cmsg = CMSG_FIRSTHDR(&msg); cmsg; cmsg = CMSG_NXTHDR(&msg, cmsg)) { + struct tpacket_auxdata *aux; + unsigned int len; + struct vlan_tag *tag; + + if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct tpacket_auxdata)) || + cmsg->cmsg_level != SOL_PACKET || + cmsg->cmsg_type != PACKET_AUXDATA) + continue; + + aux = (struct tpacket_auxdata *)CMSG_DATA(cmsg); + if (aux->tp_vlan_tci == 0) + continue; + + len = packet_len > iov.iov_len ? iov.iov_len : packet_len; + if (len < 2 * ETH_ALEN) + break; + + bp -= VLAN_TAG_LEN; + memmove(bp, bp + VLAN_TAG_LEN, 2 * ETH_ALEN); + + tag = (struct vlan_tag *)(bp + 2 * ETH_ALEN); + tag->vlan_tpid = htons(ETH_P_8021Q); + tag->vlan_tci = htons(aux->tp_vlan_tci); + + packet_len += VLAN_TAG_LEN; + } +#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */ +#endif /* HAVE_PF_PACKET_SOCKETS */ /* * XXX: According to the kernel source we should get the real @@ -719,9 +1617,9 @@ pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata) /* Fill in our own header data */ if (ioctl(handle->fd, SIOCGSTAMP, &pcap_header.ts) == -1) { - snprintf(handle->errbuf, sizeof(handle->errbuf), + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "SIOCGSTAMP: %s", pcap_strerror(errno)); - return -1; + return PCAP_ERROR; } pcap_header.caplen = caplen; pcap_header.len = packet_len; @@ -836,6 +1734,18 @@ pcap_stats_linux(pcap_t *handle, struct pcap_stat *stats) socklen_t len = sizeof (struct tpacket_stats); #endif + long if_dropped = 0; + + /* + * To fill in ps_ifdrop, we parse /proc/net/dev for the number + */ + if (handle->opt.promisc) + { + if_dropped = handle->md.proc_dropped; + handle->md.proc_dropped = linux_if_drops(handle->md.device); + handle->md.stat.ps_ifdrop += (handle->md.proc_dropped - if_dropped); + } + #ifdef HAVE_TPACKET_STATS /* * Try to get the packet counts from the kernel. @@ -856,6 +1766,8 @@ pcap_stats_linux(pcap_t *handle, struct pcap_stat *stats) * dropped by the interface driver. It counts only * packets that passed the filter. * + * See above for ps_ifdrop. + * * Both statistics include packets not yet read from * the kernel by libpcap, and thus not yet seen by * the application. @@ -919,19 +1831,299 @@ pcap_stats_linux(pcap_t *handle, struct pcap_stat *stats) * * "ps_drop" is not supported. * + * "ps_ifdrop" is supported. It will return the number + * of drops the interface reports in /proc/net/dev, + * if that is available. + * * "ps_recv" doesn't include packets not yet read from * the kernel by libpcap. * * We maintain the count of packets processed by libpcap in * "md.packets_read", for reasons described in the comment * at the end of pcap_read_packet(). We have no idea how many - * packets were dropped. + * packets were dropped by the kernel buffers -- but we know + * how many the interface dropped, so we can return that. */ + stats->ps_recv = handle->md.packets_read; stats->ps_drop = 0; + stats->ps_ifdrop = handle->md.stat.ps_ifdrop; return 0; } +/* + * Get from "/sys/class/net" all interfaces listed there; if they're + * already in the list of interfaces we have, that won't add another + * instance, but if they're not, that'll add them. + * + * We don't bother getting any addresses for them; it appears you can't + * use SIOCGIFADDR on Linux to get IPv6 addresses for interfaces, and, + * although some other types of addresses can be fetched with SIOCGIFADDR, + * we don't bother with them for now. + * + * We also don't fail if we couldn't open "/sys/class/net"; we just leave + * the list of interfaces as is, and return 0, so that we can try + * scanning /proc/net/dev. + */ +static int +scan_sys_class_net(pcap_if_t **devlistp, char *errbuf) +{ + DIR *sys_class_net_d; + int fd; + struct dirent *ent; + char *p; + char name[512]; /* XXX - pick a size */ + char *q, *saveq; + struct ifreq ifrflags; + int ret = 1; + + sys_class_net_d = opendir("/sys/class/net"); + if (sys_class_net_d == NULL && errno == ENOENT) + return (0); + + /* + * Create a socket from which to fetch interface information. + */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "socket: %s", pcap_strerror(errno)); + return (-1); + } + + for (;;) { + errno = 0; + ent = readdir(sys_class_net_d); + if (ent == NULL) { + /* + * Error or EOF; if errno != 0, it's an error. + */ + break; + } + + /* + * Ignore directories (".", "..", and any subdirectories). + */ + if (ent->d_type == DT_DIR) + continue; + + /* + * Get the interface name. + */ + p = &ent->d_name[0]; + q = &name[0]; + while (*p != '\0' && isascii(*p) && !isspace(*p)) { + if (*p == ':') { + /* + * This could be the separator between a + * name and an alias number, or it could be + * the separator between a name with no + * alias number and the next field. + * + * If there's a colon after digits, it + * separates the name and the alias number, + * otherwise it separates the name and the + * next field. + */ + saveq = q; + while (isascii(*p) && isdigit(*p)) + *q++ = *p++; + if (*p != ':') { + /* + * That was the next field, + * not the alias number. + */ + q = saveq; + } + break; + } else + *q++ = *p++; + } + *q = '\0'; + + /* + * Get the flags for this interface, and skip it if + * it's not up. + */ + strncpy(ifrflags.ifr_name, name, sizeof(ifrflags.ifr_name)); + if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifrflags) < 0) { + if (errno == ENXIO || errno == ENODEV) + continue; + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "SIOCGIFFLAGS: %.*s: %s", + (int)sizeof(ifrflags.ifr_name), + ifrflags.ifr_name, + pcap_strerror(errno)); + ret = -1; + break; + } + if (!(ifrflags.ifr_flags & IFF_UP)) + continue; + + /* + * Add an entry for this interface, with no addresses. + */ + if (pcap_add_if(devlistp, name, ifrflags.ifr_flags, NULL, + errbuf) == -1) { + /* + * Failure. + */ + ret = -1; + break; + } + } + if (ret != -1) { + /* + * Well, we didn't fail for any other reason; did we + * fail due to an error reading the directory? + */ + if (errno != 0) { + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "Error reading /sys/class/net: %s", + pcap_strerror(errno)); + ret = -1; + } + } + + (void)close(fd); + (void)closedir(sys_class_net_d); + return (ret); +} + +/* + * Get from "/proc/net/dev" all interfaces listed there; if they're + * already in the list of interfaces we have, that won't add another + * instance, but if they're not, that'll add them. + * + * See comments from scan_sys_class_net(). + */ +static int +scan_proc_net_dev(pcap_if_t **devlistp, char *errbuf) +{ + FILE *proc_net_f; + int fd; + char linebuf[512]; + int linenum; + char *p; + char name[512]; /* XXX - pick a size */ + char *q, *saveq; + struct ifreq ifrflags; + int ret = 0; + + proc_net_f = fopen("/proc/net/dev", "r"); + if (proc_net_f == NULL && errno == ENOENT) + return (0); + + /* + * Create a socket from which to fetch interface information. + */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "socket: %s", pcap_strerror(errno)); + return (-1); + } + + for (linenum = 1; + fgets(linebuf, sizeof linebuf, proc_net_f) != NULL; linenum++) { + /* + * Skip the first two lines - they're headers. + */ + if (linenum <= 2) + continue; + + p = &linebuf[0]; + + /* + * Skip leading white space. + */ + while (*p != '\0' && isascii(*p) && isspace(*p)) + p++; + if (*p == '\0' || *p == '\n') + continue; /* blank line */ + + /* + * Get the interface name. + */ + q = &name[0]; + while (*p != '\0' && isascii(*p) && !isspace(*p)) { + if (*p == ':') { + /* + * This could be the separator between a + * name and an alias number, or it could be + * the separator between a name with no + * alias number and the next field. + * + * If there's a colon after digits, it + * separates the name and the alias number, + * otherwise it separates the name and the + * next field. + */ + saveq = q; + while (isascii(*p) && isdigit(*p)) + *q++ = *p++; + if (*p != ':') { + /* + * That was the next field, + * not the alias number. + */ + q = saveq; + } + break; + } else + *q++ = *p++; + } + *q = '\0'; + + /* + * Get the flags for this interface, and skip it if + * it's not up. + */ + strncpy(ifrflags.ifr_name, name, sizeof(ifrflags.ifr_name)); + if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifrflags) < 0) { + if (errno == ENXIO) + continue; + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "SIOCGIFFLAGS: %.*s: %s", + (int)sizeof(ifrflags.ifr_name), + ifrflags.ifr_name, + pcap_strerror(errno)); + ret = -1; + break; + } + if (!(ifrflags.ifr_flags & IFF_UP)) + continue; + + /* + * Add an entry for this interface, with no addresses. + */ + if (pcap_add_if(devlistp, name, ifrflags.ifr_flags, NULL, + errbuf) == -1) { + /* + * Failure. + */ + ret = -1; + break; + } + } + if (ret != -1) { + /* + * Well, we didn't fail for any other reason; did we + * fail due to an error reading the file? + */ + if (ferror(proc_net_f)) { + (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, + "Error reading /proc/net/dev: %s", + pcap_strerror(errno)); + ret = -1; + } + } + + (void)close(fd); + (void)fclose(proc_net_f); + return (ret); +} + /* * Description string for the "any" device. */ @@ -940,25 +2132,66 @@ static const char any_descr[] = "Pseudo-device that captures on all interfaces"; int pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf) { + int ret; + + /* + * Read "/sys/class/net", and add to the list of interfaces all + * interfaces listed there that we don't already have, because, + * on Linux, SIOCGIFCONF reports only interfaces with IPv4 addresses, + * and even getifaddrs() won't return information about + * interfaces with no addresses, so you need to read "/sys/class/net" + * to get the names of the rest of the interfaces. + */ + ret = scan_sys_class_net(alldevsp, errbuf); + if (ret == -1) + return (-1); /* failed */ + if (ret == 0) { + /* + * No /sys/class/net; try reading /proc/net/dev instead. + */ + if (scan_proc_net_dev(alldevsp, errbuf) == -1) + return (-1); + } + + /* + * Add the "any" device. + */ if (pcap_add_if(alldevsp, "any", 0, any_descr, errbuf) < 0) return (-1); #ifdef HAVE_DAG_API + /* + * Add DAG devices. + */ if (dag_platform_finddevs(alldevsp, errbuf) < 0) return (-1); #endif /* HAVE_DAG_API */ #ifdef HAVE_SEPTEL_API + /* + * Add Septel devices. + */ if (septel_platform_finddevs(alldevsp, errbuf) < 0) return (-1); #endif /* HAVE_SEPTEL_API */ +#ifdef HAVE_SNF_API + if (snf_platform_finddevs(alldevsp, errbuf) < 0) + return (-1); +#endif /* HAVE_SNF_API */ + #ifdef PCAP_SUPPORT_BT + /* + * Add Bluetooth devices. + */ if (bt_platform_finddevs(alldevsp, errbuf) < 0) return (-1); #endif #ifdef PCAP_SUPPORT_USB + /* + * Add USB devices. + */ if (usb_platform_finddevs(alldevsp, errbuf) < 0) return (-1); #endif @@ -970,7 +2203,8 @@ pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf) * Attach the given BPF code to the packet capture device. */ static int -pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter) +pcap_setfilter_linux_common(pcap_t *handle, struct bpf_program *filter, + int is_mmapped) { #ifdef SO_ATTACH_FILTER struct sock_fprog fcode; @@ -982,13 +2216,10 @@ pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter) return -1; if (!filter) { strncpy(handle->errbuf, "setfilter: No filter specified", - sizeof(handle->errbuf)); + PCAP_ERRBUF_SIZE); return -1; } -#ifdef SITA - return acn_setfilter(handle->fd, filter); -#else /* Make our private copy of the filter */ if (install_bpf_program(handle, filter) < 0) @@ -1026,13 +2257,13 @@ pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter) * * Oh, and we also need to fix it up so that all "ret" * instructions with non-zero operands have 65535 as the - * operand, and so that, if we're in cooked mode, all - * memory-reference instructions use special magic offsets - * in references to the link-layer header and assume that - * the link-layer payload begins at 0; "fix_program()" - * will do that. + * operand if we're not capturing in memory-mapped modee, + * and so that, if we're in cooked mode, all memory-reference + * instructions use special magic offsets in references to + * the link-layer header and assume that the link-layer + * payload begins at 0; "fix_program()" will do that. */ - switch (fix_program(handle, &fcode)) { + switch (fix_program(handle, &fcode, is_mmapped)) { case -1: default: @@ -1104,9 +2335,15 @@ pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter) #endif /* SO_ATTACH_FILTER */ return 0; -#endif /* SITA */ } +static int +pcap_setfilter_linux(pcap_t *handle, struct bpf_program *filter) +{ + return pcap_setfilter_linux_common(handle, filter, 0); +} + + /* * Set direction flag: Which packets do we accept on a forwarding * single device? IN, OUT or both? @@ -1124,12 +2361,12 @@ pcap_setdirection_linux(pcap_t *handle, pcap_direction_t d) * We're not using PF_PACKET sockets, so we can't determine * the direction of the packet. */ - snprintf(handle->errbuf, sizeof(handle->errbuf), + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "Setting direction is not supported on SOCK_PACKET sockets"); return -1; } - +#ifdef HAVE_PF_PACKET_SOCKETS /* * Map the PACKET_ value to a LINUX_SLL_ value; we * want the same numerical value to be used in @@ -1162,6 +2399,7 @@ map_packet_type_to_sll_type(short int sll_pkttype) return -1; } } +#endif /* * Linux uses the ARP hardware type to identify the type of an @@ -1199,7 +2437,7 @@ static void map_arphrd_to_dlt(pcap_t *handle, int arptype, int cooked_ok) * XXX - are there any sorts of "fake Ethernet" that have * ARPHRD_ETHER but that *shouldn't offer DLT_DOCSIS as * a Cisco CMTS won't put traffic onto it or get traffic - * bridged onto it? ISDN is handled in "live_open_new()", + * bridged onto it? ISDN is handled in "activate_new()", * as we fall back on cooked mode there; are there any * others? */ @@ -1235,6 +2473,12 @@ static void map_arphrd_to_dlt(pcap_t *handle, int arptype, int cooked_ok) case ARPHRD_CHAOS: handle->linktype = DLT_CHAOS; break; +#ifndef ARPHRD_CAN +#define ARPHRD_CAN 280 +#endif + case ARPHRD_CAN: + handle->linktype = DLT_CAN_SOCKETCAN; + break; #ifndef ARPHRD_IEEE802_TR #define ARPHRD_IEEE802_TR 800 /* From Linux 2.4 */ @@ -1457,6 +2701,24 @@ static void map_arphrd_to_dlt(pcap_t *handle, int arptype, int cooked_ok) handle->linktype = DLT_LINUX_LAPD; break; +#ifndef ARPHRD_NONE +#define ARPHRD_NONE 0xFFFE +#endif + case ARPHRD_NONE: + /* + * No link-layer header; packets are just IP + * packets, so use DLT_RAW. + */ + handle->linktype = DLT_RAW; + break; + +#ifndef ARPHRD_IEEE802154 +#define ARPHRD_IEEE802154 804 +#endif + case ARPHRD_IEEE802154: + handle->linktype = DLT_IEEE802_15_4_NOFCS; + break; + default: handle->linktype = -1; break; @@ -1466,218 +2728,290 @@ static void map_arphrd_to_dlt(pcap_t *handle, int arptype, int cooked_ok) /* ===== Functions to interface to the newer kernels ================== */ /* - * Try to open a packet socket using the new kernel interface. - * Returns 0 on failure. - * FIXME: 0 uses to mean success (Sebastian) + * Try to open a packet socket using the new kernel PF_PACKET interface. + * Returns 1 on success, 0 on an error that means the new interface isn't + * present (so the old SOCK_PACKET interface should be tried), and a + * PCAP_ERROR_ value on an error that means that the old mechanism won't + * work either (so it shouldn't be tried). */ static int -live_open_new(pcap_t *handle, const char *device, int promisc, - int to_ms, char *ebuf) +activate_new(pcap_t *handle) { #ifdef HAVE_PF_PACKET_SOCKETS + const char *device = handle->opt.source; + int is_any_device = (strcmp(device, "any") == 0); int sock_fd = -1, arptype; - int err; - int fatal_err = 0; +#ifdef HAVE_PACKET_AUXDATA + int val; +#endif + int err = 0; struct packet_mreq mr; - /* One shot loop used for error handling - bail out with break */ - - do { - /* - * Open a socket with protocol family packet. If a device is - * given we try to open it in raw mode otherwise we use - * the cooked interface. - */ - sock_fd = device ? - socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)) - : socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL)); - - if (sock_fd == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, "socket: %s", - pcap_strerror(errno) ); - break; - } + /* + * Open a socket with protocol family packet. If the + * "any" device was specified, we open a SOCK_DGRAM + * socket for the cooked interface, otherwise we first + * try a SOCK_RAW socket for the raw interface. + */ + sock_fd = is_any_device ? + socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL)) : + socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); - /* It seems the kernel supports the new interface. */ - handle->md.sock_packet = 0; + if (sock_fd == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "socket: %s", + pcap_strerror(errno) ); + return 0; /* try old mechanism */ + } - /* - * Get the interface index of the loopback device. - * If the attempt fails, don't fail, just set the - * "md.lo_ifindex" to -1. - * - * XXX - can there be more than one device that loops - * packets back, i.e. devices other than "lo"? If so, - * we'd need to find them all, and have an array of - * indices for them, and check all of them in - * "pcap_read_packet()". - */ - handle->md.lo_ifindex = iface_get_id(sock_fd, "lo", ebuf); + /* It seems the kernel supports the new interface. */ + handle->md.sock_packet = 0; - /* - * Default value for offset to align link-layer payload - * on a 4-byte boundary. - */ - handle->offset = 0; + /* + * Get the interface index of the loopback device. + * If the attempt fails, don't fail, just set the + * "md.lo_ifindex" to -1. + * + * XXX - can there be more than one device that loops + * packets back, i.e. devices other than "lo"? If so, + * we'd need to find them all, and have an array of + * indices for them, and check all of them in + * "pcap_read_packet()". + */ + handle->md.lo_ifindex = iface_get_id(sock_fd, "lo", handle->errbuf); - /* - * What kind of frames do we have to deal with? Fall back - * to cooked mode if we have an unknown interface type. - */ + /* + * Default value for offset to align link-layer payload + * on a 4-byte boundary. + */ + handle->offset = 0; - if (device) { - /* Assume for now we don't need cooked mode. */ - handle->md.cooked = 0; + /* + * What kind of frames do we have to deal with? Fall back + * to cooked mode if we have an unknown interface type + * or a type we know doesn't work well in raw mode. + */ + if (!is_any_device) { + /* Assume for now we don't need cooked mode. */ + handle->md.cooked = 0; - arptype = iface_get_arptype(sock_fd, device, ebuf); - if (arptype == -1) { - fatal_err = 1; - break; + if (handle->opt.rfmon) { + /* + * We were asked to turn on monitor mode. + * Do so before we get the link-layer type, + * because entering monitor mode could change + * the link-layer type. + */ + err = enter_rfmon_mode(handle, sock_fd, device); + if (err < 0) { + /* Hard failure */ + close(sock_fd); + return err; } - map_arphrd_to_dlt(handle, arptype, 1); - if (handle->linktype == -1 || - handle->linktype == DLT_LINUX_SLL || - handle->linktype == DLT_LINUX_IRDA || - handle->linktype == DLT_LINUX_LAPD || - (handle->linktype == DLT_EN10MB && - (strncmp("isdn", device, 4) == 0 || - strncmp("isdY", device, 4) == 0))) { - /* - * Unknown interface type (-1), or a - * device we explicitly chose to run - * in cooked mode (e.g., PPP devices), - * or an ISDN device (whose link-layer - * type we can only determine by using - * APIs that may be different on different - * kernels) - reopen in cooked mode. - */ - if (close(sock_fd) == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "close: %s", pcap_strerror(errno)); - break; - } - sock_fd = socket(PF_PACKET, SOCK_DGRAM, - htons(ETH_P_ALL)); - if (sock_fd == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "socket: %s", pcap_strerror(errno)); - break; - } - handle->md.cooked = 1; - + if (err == 0) { /* - * Get rid of any link-layer type list - * we allocated - this only supports cooked - * capture. + * Nothing worked for turning monitor mode + * on. */ - if (handle->dlt_list != NULL) { - free(handle->dlt_list); - handle->dlt_list = NULL; - handle->dlt_count = 0; - } + close(sock_fd); + return PCAP_ERROR_RFMON_NOTSUP; + } - if (handle->linktype == -1) { - /* - * Warn that we're falling back on - * cooked mode; we may want to - * update "map_arphrd_to_dlt()" - * to handle the new type. - */ - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "arptype %d not " - "supported by libpcap - " - "falling back to cooked " - "socket", - arptype); - } - /* IrDA capture is not a real "cooked" capture, - * it's IrLAP frames, not IP packets. */ - if (handle->linktype != DLT_LINUX_IRDA && - handle->linktype != DLT_LINUX_LAPD) - handle->linktype = DLT_LINUX_SLL; + /* + * Either monitor mode has been turned on for + * the device, or we've been given a different + * device to open for monitor mode. If we've + * been given a different device, use it. + */ + if (handle->md.mondevice != NULL) + device = handle->md.mondevice; + } + arptype = iface_get_arptype(sock_fd, device, handle->errbuf); + if (arptype < 0) { + close(sock_fd); + return arptype; + } + map_arphrd_to_dlt(handle, arptype, 1); + if (handle->linktype == -1 || + handle->linktype == DLT_LINUX_SLL || + handle->linktype == DLT_LINUX_IRDA || + handle->linktype == DLT_LINUX_LAPD || + (handle->linktype == DLT_EN10MB && + (strncmp("isdn", device, 4) == 0 || + strncmp("isdY", device, 4) == 0))) { + /* + * Unknown interface type (-1), or a + * device we explicitly chose to run + * in cooked mode (e.g., PPP devices), + * or an ISDN device (whose link-layer + * type we can only determine by using + * APIs that may be different on different + * kernels) - reopen in cooked mode. + */ + if (close(sock_fd) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "close: %s", pcap_strerror(errno)); + return PCAP_ERROR; } + sock_fd = socket(PF_PACKET, SOCK_DGRAM, + htons(ETH_P_ALL)); + if (sock_fd == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "socket: %s", pcap_strerror(errno)); + return PCAP_ERROR; + } + handle->md.cooked = 1; - handle->md.ifindex = iface_get_id(sock_fd, device, ebuf); - if (handle->md.ifindex == -1) - break; + /* + * Get rid of any link-layer type list + * we allocated - this only supports cooked + * capture. + */ + if (handle->dlt_list != NULL) { + free(handle->dlt_list); + handle->dlt_list = NULL; + handle->dlt_count = 0; + } - if ((err = iface_bind(sock_fd, handle->md.ifindex, - ebuf)) < 0) { - if (err == -2) - fatal_err = 1; - break; + if (handle->linktype == -1) { + /* + * Warn that we're falling back on + * cooked mode; we may want to + * update "map_arphrd_to_dlt()" + * to handle the new type. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "arptype %d not " + "supported by libpcap - " + "falling back to cooked " + "socket", + arptype); } - } else { + /* - * This is cooked mode. + * IrDA capture is not a real "cooked" capture, + * it's IrLAP frames, not IP packets. The + * same applies to LAPD capture. */ - handle->md.cooked = 1; - handle->linktype = DLT_LINUX_SLL; + if (handle->linktype != DLT_LINUX_IRDA && + handle->linktype != DLT_LINUX_LAPD) + handle->linktype = DLT_LINUX_SLL; + } + handle->md.ifindex = iface_get_id(sock_fd, device, + handle->errbuf); + if (handle->md.ifindex == -1) { + close(sock_fd); + return PCAP_ERROR; + } + + if ((err = iface_bind(sock_fd, handle->md.ifindex, + handle->errbuf)) != 1) { + close(sock_fd); + if (err < 0) + return err; + else + return 0; /* try old mechanism */ + } + } else { + /* + * The "any" device. + */ + if (handle->opt.rfmon) { /* - * We're not bound to a device. - * XXX - true? Or true only if we're using - * the "any" device? - * For now, we're using this as an indication - * that we can't transmit; stop doing that only - * if we figure out how to transmit in cooked - * mode. + * It doesn't support monitor mode. */ - handle->md.ifindex = -1; + return PCAP_ERROR_RFMON_NOTSUP; } /* - * Select promiscuous mode on if "promisc" is set. - * - * Do not turn allmulti mode on if we don't select - * promiscuous mode - on some devices (e.g., Orinoco - * wireless interfaces), allmulti mode isn't supported - * and the driver implements it by turning promiscuous - * mode on, and that screws up the operation of the - * card as a normal networking interface, and on no - * other platform I know of does starting a non- - * promiscuous capture affect which multicast packets - * are received by the interface. + * It uses cooked mode. */ + handle->md.cooked = 1; + handle->linktype = DLT_LINUX_SLL; /* - * Hmm, how can we set promiscuous mode on all interfaces? - * I am not sure if that is possible at all. + * We're not bound to a device. + * For now, we're using this as an indication + * that we can't transmit; stop doing that only + * if we figure out how to transmit in cooked + * mode. */ + handle->md.ifindex = -1; + } - if (device && promisc) { - memset(&mr, 0, sizeof(mr)); - mr.mr_ifindex = handle->md.ifindex; - mr.mr_type = PACKET_MR_PROMISC; - if (setsockopt(sock_fd, SOL_PACKET, - PACKET_ADD_MEMBERSHIP, &mr, sizeof(mr)) == -1) - { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "setsockopt: %s", pcap_strerror(errno)); - break; - } - } + /* + * Select promiscuous mode on if "promisc" is set. + * + * Do not turn allmulti mode on if we don't select + * promiscuous mode - on some devices (e.g., Orinoco + * wireless interfaces), allmulti mode isn't supported + * and the driver implements it by turning promiscuous + * mode on, and that screws up the operation of the + * card as a normal networking interface, and on no + * other platform I know of does starting a non- + * promiscuous capture affect which multicast packets + * are received by the interface. + */ - /* Save the socket FD in the pcap structure */ + /* + * Hmm, how can we set promiscuous mode on all interfaces? + * I am not sure if that is possible at all. For now, we + * silently ignore attempts to turn promiscuous mode on + * for the "any" device (so you don't have to explicitly + * disable it in programs such as tcpdump). + */ - handle->fd = sock_fd; + if (!is_any_device && handle->opt.promisc) { + memset(&mr, 0, sizeof(mr)); + mr.mr_ifindex = handle->md.ifindex; + mr.mr_type = PACKET_MR_PROMISC; + if (setsockopt(sock_fd, SOL_PACKET, PACKET_ADD_MEMBERSHIP, + &mr, sizeof(mr)) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "setsockopt: %s", pcap_strerror(errno)); + close(sock_fd); + return PCAP_ERROR; + } + } - return 1; + /* Enable auxillary data if supported and reserve room for + * reconstructing VLAN headers. */ +#ifdef HAVE_PACKET_AUXDATA + val = 1; + if (setsockopt(sock_fd, SOL_PACKET, PACKET_AUXDATA, &val, + sizeof(val)) == -1 && errno != ENOPROTOOPT) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "setsockopt: %s", pcap_strerror(errno)); + close(sock_fd); + return PCAP_ERROR; + } + handle->offset += VLAN_TAG_LEN; +#endif /* HAVE_PACKET_AUXDATA */ - } while(0); + /* + * This is a 2.2[.x] or later kernel (we know that + * because we're not using a SOCK_PACKET socket - + * PF_PACKET is supported only in 2.2 and later + * kernels). + * + * We can safely pass "recvfrom()" a byte count + * based on the snapshot length. + * + * If we're in cooked mode, make the snapshot length + * large enough to hold a "cooked mode" header plus + * 1 byte of packet data (so we don't pass a byte + * count of 0 to "recvfrom()"). + */ + if (handle->md.cooked) { + if (handle->snapshot < SLL_HDR_LEN + 1) + handle->snapshot = SLL_HDR_LEN + 1; + } + handle->bufsize = handle->snapshot; - if (sock_fd != -1) - close(sock_fd); + /* Save the socket FD in the pcap structure */ + handle->fd = sock_fd; - if (fatal_err) { - /* - * Get rid of any link-layer type list we allocated. - */ - if (handle->dlt_list != NULL) - free(handle->dlt_list); - return -2; - } else - return 0; + return 1; #else strncpy(ebuf, "New packet capturing interface not supported by build " @@ -1686,109 +3020,365 @@ live_open_new(pcap_t *handle, const char *device, int promisc, #endif } +#ifdef HAVE_PACKET_RING +/* + * Attempt to activate with memory-mapped access. + * + * On success, returns 1, and sets *status to 0 if there are no warnings + * or to a PCAP_WARNING_ code if there is a warning. + * + * On failure due to lack of support for memory-mapped capture, returns + * 0. + * + * On error, returns -1, and sets *status to the appropriate error code; + * if that is PCAP_ERROR, sets handle->errbuf to the appropriate message. + */ static int -live_open_mmap(pcap_t* handle, char* errmsg) +activate_mmap(pcap_t *handle, int *status) { -#ifdef HAVE_PACKET_RING - /* by default request 4M for the ring buffer */ - int ret = create_ring(handle, 4*1024*1024, errmsg); - if (ret == 0) + int ret; + + /* + * Attempt to allocate a buffer to hold the contents of one + * packet, for use by the oneshot callback. + */ + handle->md.oneshot_buffer = malloc(handle->snapshot); + if (handle->md.oneshot_buffer == NULL) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't allocate oneshot buffer: %s", + pcap_strerror(errno)); + *status = PCAP_ERROR; + return -1; + } + + if (handle->opt.buffer_size == 0) { + /* by default request 2M for the ring buffer */ + handle->opt.buffer_size = 2*1024*1024; + } + ret = prepare_tpacket_socket(handle); + if (ret == -1) { + free(handle->md.oneshot_buffer); + *status = PCAP_ERROR; return ret; + } + ret = create_ring(handle, status); + if (ret == 0) { + /* + * We don't support memory-mapped capture; our caller + * will fall back on reading from the socket. + */ + free(handle->md.oneshot_buffer); + return 0; + } + if (ret == -1) { + /* + * Error attempting to enable memory-mapped capture; + * fail. create_ring() has set *status. + */ + free(handle->md.oneshot_buffer); + return -1; + } - /* override some defaults and inherit the other fields from - * open_live_new - * handle->offset is used to get the current position into the rx ring - * handle->cc is used to store the ring size */ + /* + * Success. *status has been set either to 0 if there are no + * warnings or to a PCAP_WARNING_ value if there is a warning. + * + * Override some defaults and inherit the other fields from + * activate_new. + * handle->offset is used to get the current position into the rx ring. + * handle->cc is used to store the ring size. + */ handle->read_op = pcap_read_linux_mmap; - handle->close_op = pcap_close_linux_mmap; + handle->cleanup_op = pcap_cleanup_linux_mmap; handle->setfilter_op = pcap_setfilter_linux_mmap; handle->setnonblock_op = pcap_setnonblock_mmap; handle->getnonblock_op = pcap_getnonblock_mmap; + handle->oneshot_callback = pcap_oneshot_mmap; handle->selectable_fd = handle->fd; return 1; +} #else /* HAVE_PACKET_RING */ +static int +activate_mmap(pcap_t *handle _U_, int *status _U_) +{ return 0; -#endif /* HAVE_PACKET_RING */ } +#endif /* HAVE_PACKET_RING */ #ifdef HAVE_PACKET_RING - -static void -compute_ring_block(int frame_size, unsigned *block_size, unsigned *frames_per_block) +/* + * Attempt to set the socket to version 2 of the memory-mapped header. + * Return 1 if we succeed or if we fail because version 2 isn't + * supported; return -1 on any other error, and set handle->errbuf. + */ +static int +prepare_tpacket_socket(pcap_t *handle) { - /* compute the minumum block size that will handle this frame. - * The block has to be page size aligned. - * The max block size allowed by the kernel is arch-dependent and - * it's not explicitly checked here. */ - *block_size = getpagesize(); - while (*block_size < frame_size) - *block_size <<= 1; +#ifdef HAVE_TPACKET2 + socklen_t len; + int val; +#endif + + handle->md.tp_version = TPACKET_V1; + handle->md.tp_hdrlen = sizeof(struct tpacket_hdr); + +#ifdef HAVE_TPACKET2 + /* Probe whether kernel supports TPACKET_V2 */ + val = TPACKET_V2; + len = sizeof(val); + if (getsockopt(handle->fd, SOL_PACKET, PACKET_HDRLEN, &val, &len) < 0) { + if (errno == ENOPROTOOPT) + return 1; /* no - just drive on */ + + /* Yes - treat as a failure. */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't get TPACKET_V2 header len on packet socket: %s", + pcap_strerror(errno)); + return -1; + } + handle->md.tp_hdrlen = val; + + val = TPACKET_V2; + if (setsockopt(handle->fd, SOL_PACKET, PACKET_VERSION, &val, + sizeof(val)) < 0) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't activate TPACKET_V2 on packet socket: %s", + pcap_strerror(errno)); + return -1; + } + handle->md.tp_version = TPACKET_V2; + + /* Reserve space for VLAN tag reconstruction */ + val = VLAN_TAG_LEN; + if (setsockopt(handle->fd, SOL_PACKET, PACKET_RESERVE, &val, + sizeof(val)) < 0) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't set up reserve on packet socket: %s", + pcap_strerror(errno)); + return -1; + } - *frames_per_block = *block_size/frame_size; +#endif /* HAVE_TPACKET2 */ + return 1; } +/* + * Attempt to set up memory-mapped access. + * + * On success, returns 1, and sets *status to 0 if there are no warnings + * or to a PCAP_WARNING_ code if there is a warning. + * + * On failure due to lack of support for memory-mapped capture, returns + * 0. + * + * On error, returns -1, and sets *status to the appropriate error code; + * if that is PCAP_ERROR, sets handle->errbuf to the appropriate message. + */ static int -create_ring(pcap_t* handle, unsigned size, char* errmsg) +create_ring(pcap_t *handle, int *status) { - unsigned i, j, ringsize, frames_per_block; + unsigned i, j, frames_per_block; struct tpacket_req req; + /* + * Start out assuming no warnings or errors. + */ + *status = 0; + /* Note that with large snapshot (say 64K) only a few frames * will be available in the ring even with pretty large ring size * (and a lot of memory will be unused). * The snap len should be carefully chosen to achive best * performance */ - req.tp_frame_size = TPACKET_ALIGN(handle->snapshot+TPACKET_HDRLEN); - req.tp_frame_nr = size/req.tp_frame_size; - compute_ring_block(req.tp_frame_size, &req.tp_block_size, &frames_per_block); - req.tp_block_nr = req.tp_frame_nr / frames_per_block; + req.tp_frame_size = TPACKET_ALIGN(handle->snapshot + + TPACKET_ALIGN(handle->md.tp_hdrlen) + + sizeof(struct sockaddr_ll)); + req.tp_frame_nr = handle->opt.buffer_size/req.tp_frame_size; - /* req.tp_frame_nr is requested to match frames_per_block*req.tp_block_nr */ - req.tp_frame_nr = req.tp_block_nr * frames_per_block; + /* compute the minumum block size that will handle this frame. + * The block has to be page size aligned. + * The max block size allowed by the kernel is arch-dependent and + * it's not explicitly checked here. */ + req.tp_block_size = getpagesize(); + while (req.tp_block_size < req.tp_frame_size) + req.tp_block_size <<= 1; + + frames_per_block = req.tp_block_size/req.tp_frame_size; + + /* + * PACKET_TIMESTAMP was added after linux/net_tstamp.h was, + * so we check for PACKET_TIMESTAMP. We check for + * linux/net_tstamp.h just in case a system somehow has + * PACKET_TIMESTAMP but not linux/net_tstamp.h; that might + * be unnecessary. + * + * SIOCSHWTSTAMP was introduced in the patch that introduced + * linux/net_tstamp.h, so we don't bother checking whether + * SIOCSHWTSTAMP is defined (if your Linux system has + * linux/net_tstamp.h but doesn't define SIOCSHWTSTAMP, your + * Linux system is badly broken). + */ +#if defined(HAVE_LINUX_NET_TSTAMP_H) && defined(PACKET_TIMESTAMP) + /* + * If we were told to do so, ask the kernel and the driver + * to use hardware timestamps. + * + * Hardware timestamps are only supported with mmapped + * captures. + */ + if (handle->opt.tstamp_type == PCAP_TSTAMP_ADAPTER || + handle->opt.tstamp_type == PCAP_TSTAMP_ADAPTER_UNSYNCED) { + struct hwtstamp_config hwconfig; + struct ifreq ifr; + int timesource; + + /* + * Ask for hardware time stamps on all packets, + * including transmitted packets. + */ + memset(&hwconfig, 0, sizeof(hwconfig)); + hwconfig.tx_type = HWTSTAMP_TX_ON; + hwconfig.rx_filter = HWTSTAMP_FILTER_ALL; + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, handle->opt.source); + ifr.ifr_data = (void *)&hwconfig; + + if (ioctl(handle->fd, SIOCSHWTSTAMP, &ifr) < 0) { + switch (errno) { + + case EPERM: + /* + * Treat this as an error, as the + * user should try to run this + * with the appropriate privileges - + * and, if they can't, shouldn't + * try requesting hardware time stamps. + */ + *status = PCAP_ERROR_PERM_DENIED; + return -1; + + case EOPNOTSUPP: + /* + * Treat this as a warning, as the + * only way to fix the warning is to + * get an adapter that supports hardware + * time stamps. We'll just fall back + * on the standard host time stamps. + */ + *status = PCAP_WARNING_TSTAMP_TYPE_NOTSUP; + break; + + default: + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "SIOCSHWTSTAMP failed: %s", + pcap_strerror(errno)); + *status = PCAP_ERROR; + return -1; + } + } else { + /* + * Well, that worked. Now specify the type of + * hardware time stamp we want for this + * socket. + */ + if (handle->opt.tstamp_type == PCAP_TSTAMP_ADAPTER) { + /* + * Hardware timestamp, synchronized + * with the system clock. + */ + timesource = SOF_TIMESTAMPING_SYS_HARDWARE; + } else { + /* + * PCAP_TSTAMP_ADAPTER_UNSYNCED - hardware + * timestamp, not synchronized with the + * system clock. + */ + timesource = SOF_TIMESTAMPING_RAW_HARDWARE; + } + if (setsockopt(handle->fd, SOL_PACKET, PACKET_TIMESTAMP, + (void *)×ource, sizeof(timesource))) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't set PACKET_TIMESTAMP: %s", + pcap_strerror(errno)); + *status = PCAP_ERROR; + return -1; + } + } + } +#endif /* HAVE_LINUX_NET_TSTAMP_H && PACKET_TIMESTAMP */ /* ask the kernel to create the ring */ retry: + req.tp_block_nr = req.tp_frame_nr / frames_per_block; + + /* req.tp_frame_nr is requested to match frames_per_block*req.tp_block_nr */ + req.tp_frame_nr = req.tp_block_nr * frames_per_block; + if (setsockopt(handle->fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))) { - /* try to reduce requested ring size to prevent memory failure */ if ((errno == ENOMEM) && (req.tp_block_nr > 1)) { - req.tp_frame_nr >>= 1; - req.tp_block_nr = req.tp_frame_nr/frames_per_block; + /* + * Memory failure; try to reduce the requested ring + * size. + * + * We used to reduce this by half -- do 5% instead. + * That may result in more iterations and a longer + * startup, but the user will be much happier with + * the resulting buffer size. + */ + if (req.tp_frame_nr < 20) + req.tp_frame_nr -= 1; + else + req.tp_frame_nr -= req.tp_frame_nr/20; goto retry; } - snprintf(errmsg, PCAP_ERRBUF_SIZE, "can't create rx ring on " - "packet socket %d: %d-%s", handle->fd, errno, - pcap_strerror(errno)); - return 0; + if (errno == ENOPROTOOPT) { + /* + * We don't have ring buffer support in this kernel. + */ + return 0; + } + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't create rx ring on packet socket: %s", + pcap_strerror(errno)); + *status = PCAP_ERROR; + return -1; } /* memory map the rx ring */ - ringsize = req.tp_block_nr * req.tp_block_size; - handle->bp = mmap(0, ringsize, PROT_READ| PROT_WRITE, MAP_SHARED, - handle->fd, 0); - if (handle->bp == MAP_FAILED) { - snprintf(errmsg, PCAP_ERRBUF_SIZE, "can't mmap rx ring: %d-%s", - errno, pcap_strerror(errno)); + handle->md.mmapbuflen = req.tp_block_nr * req.tp_block_size; + handle->md.mmapbuf = mmap(0, handle->md.mmapbuflen, + PROT_READ|PROT_WRITE, MAP_SHARED, handle->fd, 0); + if (handle->md.mmapbuf == MAP_FAILED) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't mmap rx ring: %s", pcap_strerror(errno)); /* clear the allocated ring on error*/ destroy_ring(handle); - return 0; + *status = PCAP_ERROR; + return -1; } /* allocate a ring for each frame header pointer*/ handle->cc = req.tp_frame_nr; - handle->buffer = malloc(handle->cc * sizeof(struct tpacket_hdr*)); + handle->buffer = malloc(handle->cc * sizeof(union thdr *)); if (!handle->buffer) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "can't allocate ring of frame headers: %s", + pcap_strerror(errno)); + destroy_ring(handle); - return 0; + *status = PCAP_ERROR; + return -1; } /* fill the header ring with proper frame ptr*/ handle->offset = 0; for (i=0; ibp[i*req.tp_block_size]; + void *base = &handle->md.mmapbuf[i*req.tp_block_size]; for (j=0; joffset) { - RING_GET_FRAME(handle) = (struct tpacket_hdr*) base; + RING_GET_FRAME(handle) = base; base += req.tp_frame_size; } } @@ -1809,101 +3399,252 @@ destroy_ring(pcap_t *handle) (void *) &req, sizeof(req)); /* if ring is mapped, unmap it*/ - if (handle->bp) { - /* need to re-compute the ring size */ - unsigned frames_per_block, block_size; - compute_ring_block(handle->bufsize, &block_size, &frames_per_block); - - /* do not perform sanity check here: we can't recover any error */ - munmap(handle->bp, block_size * handle->cc / frames_per_block); - handle->bp = 0; - } - - /* if the header ring is allocated, clear it*/ - if (handle->buffer) { - free(handle->buffer); - handle->buffer = 0; + if (handle->md.mmapbuf) { + /* do not test for mmap failure, as we can't recover from any error */ + munmap(handle->md.mmapbuf, handle->md.mmapbuflen); + handle->md.mmapbuf = NULL; } } +/* + * Special one-shot callback, used for pcap_next() and pcap_next_ex(), + * for Linux mmapped capture. + * + * The problem is that pcap_next() and pcap_next_ex() expect the packet + * data handed to the callback to be valid after the callback returns, + * but pcap_read_linux_mmap() has to release that packet as soon as + * the callback returns (otherwise, the kernel thinks there's still + * at least one unprocessed packet available in the ring, so a select() + * will immediately return indicating that there's data to process), so, + * in the callback, we have to make a copy of the packet. + * + * Yes, this means that, if the capture is using the ring buffer, using + * pcap_next() or pcap_next_ex() requires more copies than using + * pcap_loop() or pcap_dispatch(). If that bothers you, don't use + * pcap_next() or pcap_next_ex(). + */ +static void +pcap_oneshot_mmap(u_char *user, const struct pcap_pkthdr *h, + const u_char *bytes) +{ + struct oneshot_userdata *sp = (struct oneshot_userdata *)user; + + *sp->hdr = *h; + memcpy(sp->pd->md.oneshot_buffer, bytes, h->caplen); + *sp->pkt = sp->pd->md.oneshot_buffer; +} + static void -pcap_close_linux_mmap( pcap_t *handle ) +pcap_cleanup_linux_mmap( pcap_t *handle ) { destroy_ring(handle); - pcap_close_linux(handle); + if (handle->md.oneshot_buffer != NULL) { + free(handle->md.oneshot_buffer); + handle->md.oneshot_buffer = NULL; + } + pcap_cleanup_linux(handle); } -int +static int pcap_getnonblock_mmap(pcap_t *p, char *errbuf) { /* use negative value of timeout to indicate non blocking ops */ return (p->md.timeout<0); } -int +static int pcap_setnonblock_mmap(pcap_t *p, int nonblock, char *errbuf) { /* map each value to the corresponding 2's complement, to - * preserve the timeout value provided with pcap_open_live */ + * preserve the timeout value provided with pcap_set_timeout */ if (nonblock) { - if (p->md.timeout > 0) + if (p->md.timeout >= 0) { + /* + * Timeout is non-negative, so we're not already + * in non-blocking mode; set it to the 2's + * complement, to make it negative, as an + * indication that we're in non-blocking mode. + */ p->md.timeout = p->md.timeout*-1 - 1; - } else - if (p->md.timeout < 0) + } + } else { + if (p->md.timeout < 0) { + /* + * Timeout is negative, so we're not already + * in blocking mode; reverse the previous + * operation, to make the timeout non-negative + * again. + */ p->md.timeout = (p->md.timeout+1)*-1; + } + } return 0; } +static inline union thdr * +pcap_get_ring_frame(pcap_t *handle, int status) +{ + union thdr h; + + h.raw = RING_GET_FRAME(handle); + switch (handle->md.tp_version) { + case TPACKET_V1: + if (status != (h.h1->tp_status ? TP_STATUS_USER : + TP_STATUS_KERNEL)) + return NULL; + break; +#ifdef HAVE_TPACKET2 + case TPACKET_V2: + if (status != (h.h2->tp_status ? TP_STATUS_USER : + TP_STATUS_KERNEL)) + return NULL; + break; +#endif + } + return h.raw; +} + +#ifndef POLLRDHUP +#define POLLRDHUP 0 +#endif + static int pcap_read_linux_mmap(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user) { + int timeout; int pkts = 0; + char c; /* wait for frames availability.*/ - if ((handle->md.timeout >= 0) && !(RING_GET_FRAME(handle)->tp_status)) { + if (!pcap_get_ring_frame(handle, TP_STATUS_USER)) { struct pollfd pollinfo; int ret; pollinfo.fd = handle->fd; pollinfo.events = POLLIN; + if (handle->md.timeout == 0) + timeout = -1; /* block forever */ + else if (handle->md.timeout > 0) + timeout = handle->md.timeout; /* block for that amount of time */ + else + timeout = 0; /* non-blocking mode - poll to pick up errors */ do { - /* poll() requires a negative timeout to wait forever */ - ret = poll(&pollinfo, 1, (handle->md.timeout > 0)? - handle->md.timeout: -1); - if ((ret < 0) && (errno != EINTR)) { + ret = poll(&pollinfo, 1, timeout); + if (ret < 0 && errno != EINTR) { snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, - "can't poll on packet socket fd %d: %d-%s", - handle->fd, errno, pcap_strerror(errno)); - return -1; - } + "can't poll on packet socket: %s", + pcap_strerror(errno)); + return PCAP_ERROR; + } else if (ret > 0 && + (pollinfo.revents & (POLLHUP|POLLRDHUP|POLLERR|POLLNVAL))) { + /* + * There's some indication other than + * "you can read on this descriptor" on + * the descriptor. + */ + if (pollinfo.revents & (POLLHUP | POLLRDHUP)) { + snprintf(handle->errbuf, + PCAP_ERRBUF_SIZE, + "Hangup on packet socket"); + return PCAP_ERROR; + } + if (pollinfo.revents & POLLERR) { + /* + * A recv() will give us the + * actual error code. + * + * XXX - make the socket non-blocking? + */ + if (recv(handle->fd, &c, sizeof c, + MSG_PEEK) != -1) + continue; /* what, no error? */ + if (errno == ENETDOWN) { + /* + * The device on which we're + * capturing went away. + * + * XXX - we should really return + * PCAP_ERROR_IFACE_NOT_UP, + * but pcap_dispatch() etc. + * aren't defined to return + * that. + */ + snprintf(handle->errbuf, + PCAP_ERRBUF_SIZE, + "The interface went down"); + } else { + snprintf(handle->errbuf, + PCAP_ERRBUF_SIZE, + "Error condition on packet socket: %s", + strerror(errno)); + } + return PCAP_ERROR; + } + if (pollinfo.revents & POLLNVAL) { + snprintf(handle->errbuf, + PCAP_ERRBUF_SIZE, + "Invalid polling request on packet socket"); + return PCAP_ERROR; + } + } /* check for break loop condition on interrupted syscall*/ if (handle->break_loop) { handle->break_loop = 0; - return -2; + return PCAP_ERROR_BREAK; } } while (ret < 0); } - /* negative values of max_packets are used to require all - * packets available in the ring */ - while ((pkts < max_packets) || (max_packets <0)) { + /* non-positive values of max_packets are used to require all + * packets currently available in the ring */ + while ((pkts < max_packets) || (max_packets <= 0)) { int run_bpf; struct sockaddr_ll *sll; struct pcap_pkthdr pcaphdr; unsigned char *bp; - struct tpacket_hdr* thdr = RING_GET_FRAME(handle); - if (thdr->tp_status == TP_STATUS_KERNEL) + union thdr h; + unsigned int tp_len; + unsigned int tp_mac; + unsigned int tp_snaplen; + unsigned int tp_sec; + unsigned int tp_usec; + + h.raw = pcap_get_ring_frame(handle, TP_STATUS_USER); + if (!h.raw) break; + switch (handle->md.tp_version) { + case TPACKET_V1: + tp_len = h.h1->tp_len; + tp_mac = h.h1->tp_mac; + tp_snaplen = h.h1->tp_snaplen; + tp_sec = h.h1->tp_sec; + tp_usec = h.h1->tp_usec; + break; +#ifdef HAVE_TPACKET2 + case TPACKET_V2: + tp_len = h.h2->tp_len; + tp_mac = h.h2->tp_mac; + tp_snaplen = h.h2->tp_snaplen; + tp_sec = h.h2->tp_sec; + tp_usec = h.h2->tp_nsec / 1000; + break; +#endif + default: + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "unsupported tpacket version %d", + handle->md.tp_version); + return -1; + } /* perform sanity check on internal offset. */ - if (thdr->tp_mac+thdr->tp_snaplen > handle->bufsize) { + if (tp_mac + tp_snaplen > handle->bufsize) { snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "corrupted frame on kernel ring mac " - "offset %d + caplen %d > frame len %d\n", - thdr->tp_mac, thdr->tp_snaplen, handle->bufsize); + "offset %d + caplen %d > frame len %d", + tp_mac, tp_snaplen, handle->bufsize); return -1; } @@ -1916,30 +3657,80 @@ pcap_read_linux_mmap(pcap_t *handle, int max_packets, pcap_handler callback, * Note: alternatively it could be possible to stop applying * the filter when the ring became empty, but it can possibly * happen a lot later... */ - bp = (unsigned char*)thdr + thdr->tp_mac; + bp = (unsigned char*)h.raw + tp_mac; run_bpf = (!handle->md.use_bpf) || ((handle->md.use_bpf>1) && handle->md.use_bpf--); if (run_bpf && handle->fcode.bf_insns && (bpf_filter(handle->fcode.bf_insns, bp, - thdr->tp_len, thdr->tp_snaplen) == 0)) + tp_len, tp_snaplen) == 0)) goto skip; - /* check direction and interface index */ - sll = (void*)thdr + TPACKET_ALIGN(sizeof(*thdr)); - if ((sll->sll_ifindex == handle->md.lo_ifindex) && - (sll->sll_pkttype == PACKET_OUTGOING)) - goto skip; + /* + * Do checks based on packet direction. + */ + sll = (void *)h.raw + TPACKET_ALIGN(handle->md.tp_hdrlen); + if (sll->sll_pkttype == PACKET_OUTGOING) { + /* + * Outgoing packet. + * If this is from the loopback device, reject it; + * we'll see the packet as an incoming packet as well, + * and we don't want to see it twice. + */ + if (sll->sll_ifindex == handle->md.lo_ifindex) + goto skip; + + /* + * If the user only wants incoming packets, reject it. + */ + if (handle->direction == PCAP_D_IN) + goto skip; + } else { + /* + * Incoming packet. + * If the user only wants outgoing packets, reject it. + */ + if (handle->direction == PCAP_D_OUT) + goto skip; + } /* get required packet info from ring header */ - pcaphdr.ts.tv_sec = thdr->tp_sec; - pcaphdr.ts.tv_usec = thdr->tp_usec; - pcaphdr.caplen = thdr->tp_snaplen; - pcaphdr.len = thdr->tp_len; + pcaphdr.ts.tv_sec = tp_sec; + pcaphdr.ts.tv_usec = tp_usec; + pcaphdr.caplen = tp_snaplen; + pcaphdr.len = tp_len; /* if required build in place the sll header*/ if (handle->md.cooked) { - struct sll_header *hdrp = (struct sll_header *)((char *)bp - sizeof(struct sll_header)); + struct sll_header *hdrp; + /* + * The kernel should have left us with enough + * space for an sll header; back up the packet + * data pointer into that space, as that'll be + * the beginning of the packet we pass to the + * callback. + */ + bp -= SLL_HDR_LEN; + + /* + * Let's make sure that's past the end of + * the tpacket header, i.e. >= + * ((u_char *)thdr + TPACKET_HDRLEN), so we + * don't step on the header when we construct + * the sll header. + */ + if (bp < (u_char *)h.raw + + TPACKET_ALIGN(handle->md.tp_hdrlen) + + sizeof(struct sockaddr_ll)) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "cooked-mode frame doesn't have room for sll header"); + return -1; + } + + /* + * OK, that worked; construct the sll header. + */ + hdrp = (struct sll_header *)bp; hdrp->sll_pkttype = map_packet_type_to_sll_type( sll->sll_pkttype); hdrp->sll_hatype = htons(sll->sll_hatype); @@ -1952,6 +3743,35 @@ pcap_read_linux_mmap(pcap_t *handle, int max_packets, pcap_handler callback, pcaphdr.len += SLL_HDR_LEN; } +#ifdef HAVE_TPACKET2 + if (handle->md.tp_version == TPACKET_V2 && h.h2->tp_vlan_tci && + tp_snaplen >= 2 * ETH_ALEN) { + struct vlan_tag *tag; + + bp -= VLAN_TAG_LEN; + memmove(bp, bp + VLAN_TAG_LEN, 2 * ETH_ALEN); + + tag = (struct vlan_tag *)(bp + 2 * ETH_ALEN); + tag->vlan_tpid = htons(ETH_P_8021Q); + tag->vlan_tci = htons(h.h2->tp_vlan_tci); + + pcaphdr.caplen += VLAN_TAG_LEN; + pcaphdr.len += VLAN_TAG_LEN; + } +#endif + + /* + * The only way to tell the kernel to cut off the + * packet at a snapshot length is with a filter program; + * if there's no filter program, the kernel won't cut + * the packet off. + * + * Trim the snapshot length to be no longer than the + * specified snapshot length. + */ + if (pcaphdr.caplen > handle->snapshot) + pcaphdr.caplen = handle->snapshot; + /* pass the packet to the user */ pkts++; callback(user, &pcaphdr, bp); @@ -1959,14 +3779,23 @@ pcap_read_linux_mmap(pcap_t *handle, int max_packets, pcap_handler callback, skip: /* next packet */ - thdr->tp_status = TP_STATUS_KERNEL; + switch (handle->md.tp_version) { + case TPACKET_V1: + h.h1->tp_status = TP_STATUS_KERNEL; + break; +#ifdef HAVE_TPACKET2 + case TPACKET_V2: + h.h2->tp_status = TP_STATUS_KERNEL; + break; +#endif + } if (++handle->offset >= handle->cc) handle->offset = 0; /* check for break loop condition*/ if (handle->break_loop) { handle->break_loop = 0; - return -2; + return PCAP_ERROR_BREAK; } } return pkts; @@ -1976,7 +3805,15 @@ static int pcap_setfilter_linux_mmap(pcap_t *handle, struct bpf_program *filter) { int n, offset; - int ret = pcap_setfilter_linux(handle, filter); + int ret; + + /* + * Don't rewrite "ret" instructions; we don't need to, as + * we're not reading packets with recvmsg(), and we don't + * want to, as, by not rewriting them, the kernel can avoid + * copying extra data. + */ + ret = pcap_setfilter_linux_common(handle, filter, 1); if (ret < 0) return ret; @@ -1993,7 +3830,7 @@ pcap_setfilter_linux_mmap(pcap_t *handle, struct bpf_program *filter) for (n=0; n < handle->cc; ++n) { if (--handle->offset < 0) handle->offset = handle->cc - 1; - if (RING_GET_FRAME(handle)->tp_status != TP_STATUS_KERNEL) + if (!pcap_get_ring_frame(handle, TP_STATUS_KERNEL)) break; } @@ -2032,6 +3869,8 @@ iface_get_id(int fd, const char *device, char *ebuf) /* * Bind the socket associated with FD to the given device. + * Return 1 on success, 0 if we should try a SOCK_PACKET socket, + * or a PCAP_ERROR_ value on a hard error. */ static int iface_bind(int fd, int ifindex, char *ebuf) @@ -2046,265 +3885,876 @@ iface_bind(int fd, int ifindex, char *ebuf) sll.sll_protocol = htons(ETH_P_ALL); if (bind(fd, (struct sockaddr *) &sll, sizeof(sll)) == -1) { + if (errno == ENETDOWN) { + /* + * Return a "network down" indication, so that + * the application can report that rather than + * saying we had a mysterious failure and + * suggest that they report a problem to the + * libpcap developers. + */ + return PCAP_ERROR_IFACE_NOT_UP; + } else { + snprintf(ebuf, PCAP_ERRBUF_SIZE, + "bind: %s", pcap_strerror(errno)); + return PCAP_ERROR; + } + } + + /* Any pending errors, e.g., network is down? */ + + if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) { snprintf(ebuf, PCAP_ERRBUF_SIZE, - "bind: %s", pcap_strerror(errno)); - return -1; + "getsockopt: %s", pcap_strerror(errno)); + return 0; + } + + if (err == ENETDOWN) { + /* + * Return a "network down" indication, so that + * the application can report that rather than + * saying we had a mysterious failure and + * suggest that they report a problem to the + * libpcap developers. + */ + return PCAP_ERROR_IFACE_NOT_UP; + } else if (err > 0) { + snprintf(ebuf, PCAP_ERRBUF_SIZE, + "bind: %s", pcap_strerror(err)); + return 0; + } + + return 1; +} + +#ifdef IW_MODE_MONITOR +/* + * Check whether the device supports the Wireless Extensions. + * Returns 1 if it does, 0 if it doesn't, PCAP_ERROR_NO_SUCH_DEVICE + * if the device doesn't even exist. + */ +static int +has_wext(int sock_fd, const char *device, char *ebuf) +{ + struct iwreq ireq; + + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + if (ioctl(sock_fd, SIOCGIWNAME, &ireq) >= 0) + return 1; /* yes */ + snprintf(ebuf, PCAP_ERRBUF_SIZE, + "%s: SIOCGIWPRIV: %s", device, pcap_strerror(errno)); + if (errno == ENODEV) + return PCAP_ERROR_NO_SUCH_DEVICE; + return 0; +} + +/* + * Per me si va ne la citta dolente, + * Per me si va ne l'etterno dolore, + * ... + * Lasciate ogne speranza, voi ch'intrate. + * + * XXX - airmon-ng does special stuff with the Orinoco driver and the + * wlan-ng driver. + */ +typedef enum { + MONITOR_WEXT, + MONITOR_HOSTAP, + MONITOR_PRISM, + MONITOR_PRISM54, + MONITOR_ACX100, + MONITOR_RT2500, + MONITOR_RT2570, + MONITOR_RT73, + MONITOR_RTL8XXX +} monitor_type; + +/* + * Use the Wireless Extensions, if we have them, to try to turn monitor mode + * on if it's not already on. + * + * Returns 1 on success, 0 if we don't support the Wireless Extensions + * on this device, or a PCAP_ERROR_ value if we do support them but + * we weren't able to turn monitor mode on. + */ +static int +enter_rfmon_mode_wext(pcap_t *handle, int sock_fd, const char *device) +{ + /* + * XXX - at least some adapters require non-Wireless Extensions + * mechanisms to turn monitor mode on. + * + * Atheros cards might require that a separate "monitor virtual access + * point" be created, with later versions of the madwifi driver. + * airmon-ng does "wlanconfig ath create wlandev {if} wlanmode + * monitor -bssid", which apparently spits out a line "athN" + * where "athN" is the monitor mode device. To leave monitor + * mode, it destroys the monitor mode device. + * + * Some Intel Centrino adapters might require private ioctls to get + * radio headers; the ipw2200 and ipw3945 drivers allow you to + * configure a separate "rtapN" interface to capture in monitor + * mode without preventing the adapter from operating normally. + * (airmon-ng doesn't appear to use that, though.) + * + * It would be Truly Wonderful if mac80211 and nl80211 cleaned this + * up, and if all drivers were converted to mac80211 drivers. + * + * If interface {if} is a mac80211 driver, the file + * /sys/class/net/{if}/phy80211 is a symlink to + * /sys/class/ieee80211/{phydev}, for some {phydev}. + * + * On Fedora 9, with a 2.6.26.3-29 kernel, my Zydas stick, at + * least, has a "wmaster0" device and a "wlan0" device; the + * latter is the one with the IP address. Both show up in + * "tcpdump -D" output. Capturing on the wmaster0 device + * captures with 802.11 headers. + * + * airmon-ng searches through /sys/class/net for devices named + * monN, starting with mon0; as soon as one *doesn't* exist, + * it chooses that as the monitor device name. If the "iw" + * command exists, it does "iw dev {if} interface add {monif} + * type monitor", where {monif} is the monitor device. It + * then (sigh) sleeps .1 second, and then configures the + * device up. Otherwise, if /sys/class/ieee80211/{phydev}/add_iface + * is a file, it writes {mondev}, without a newline, to that file, + * and again (sigh) sleeps .1 second, and then iwconfig's that + * device into monitor mode and configures it up. Otherwise, + * you can't do monitor mode. + * + * All these devices are "glued" together by having the + * /sys/class/net/{device}/phy80211 links pointing to the same + * place, so, given a wmaster, wlan, or mon device, you can + * find the other devices by looking for devices with + * the same phy80211 link. + * + * To turn monitor mode off, delete the monitor interface, + * either with "iw dev {monif} interface del" or by sending + * {monif}, with no NL, down /sys/class/ieee80211/{phydev}/remove_iface + * + * Note: if you try to create a monitor device named "monN", and + * there's already a "monN" device, it fails, as least with + * the netlink interface (which is what iw uses), with a return + * value of -ENFILE. (Return values are negative errnos.) We + * could probably use that to find an unused device. + */ + int err; + struct iwreq ireq; + struct iw_priv_args *priv; + monitor_type montype; + int i; + __u32 cmd; + int args[2]; + int channel; + + /* + * Does this device *support* the Wireless Extensions? + */ + err = has_wext(sock_fd, device, handle->errbuf); + if (err <= 0) + return err; /* either it doesn't or the device doesn't even exist */ + /* + * Try to get all the Wireless Extensions private ioctls + * supported by this device. + * + * First, get the size of the buffer we need, by supplying no + * buffer and a length of 0. If the device supports private + * ioctls, it should return E2BIG, with ireq.u.data.length set + * to the length we need. If it doesn't support them, it should + * return EOPNOTSUPP. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + ireq.u.data.pointer = (void *)args; + ireq.u.data.length = 0; + ireq.u.data.flags = 0; + if (ioctl(sock_fd, SIOCGIWPRIV, &ireq) != -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: SIOCGIWPRIV with a zero-length buffer didn't fail!", + device); + return PCAP_ERROR; + } + if (errno == EOPNOTSUPP) { + /* + * No private ioctls, so we assume that there's only one + * DLT_ for monitor mode. + */ + return 0; + } + if (errno != E2BIG) { + /* + * Failed. + */ + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: SIOCGIWPRIV: %s", device, pcap_strerror(errno)); + return PCAP_ERROR; + } + priv = malloc(ireq.u.data.length * sizeof (struct iw_priv_args)); + if (priv == NULL) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "malloc: %s", pcap_strerror(errno)); + return PCAP_ERROR; + } + ireq.u.data.pointer = (void *)priv; + if (ioctl(sock_fd, SIOCGIWPRIV, &ireq) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: SIOCGIWPRIV: %s", device, pcap_strerror(errno)); + free(priv); + return PCAP_ERROR; + } + + /* + * Look for private ioctls to turn monitor mode on or, if + * monitor mode is on, to set the header type. + */ + montype = MONITOR_WEXT; + cmd = 0; + for (i = 0; i < ireq.u.data.length; i++) { + if (strcmp(priv[i].name, "monitor_type") == 0) { + /* + * Hostap driver, use this one. + * Set monitor mode first. + * You can set it to 0 to get DLT_IEEE80211, + * 1 to get DLT_PRISM, 2 to get + * DLT_IEEE80211_RADIO_AVS, and, with more + * recent versions of the driver, 3 to get + * DLT_IEEE80211_RADIO. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if (!(priv[i].set_args & IW_PRIV_SIZE_FIXED)) + break; + if ((priv[i].set_args & IW_PRIV_SIZE_MASK) != 1) + break; + montype = MONITOR_HOSTAP; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "set_prismhdr") == 0) { + /* + * Prism54 driver, use this one. + * Set monitor mode first. + * You can set it to 2 to get DLT_IEEE80211 + * or 3 or get DLT_PRISM. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if (!(priv[i].set_args & IW_PRIV_SIZE_FIXED)) + break; + if ((priv[i].set_args & IW_PRIV_SIZE_MASK) != 1) + break; + montype = MONITOR_PRISM54; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "forceprismheader") == 0) { + /* + * RT2570 driver, use this one. + * Do this after turning monitor mode on. + * You can set it to 1 to get DLT_PRISM or 2 + * to get DLT_IEEE80211. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if (!(priv[i].set_args & IW_PRIV_SIZE_FIXED)) + break; + if ((priv[i].set_args & IW_PRIV_SIZE_MASK) != 1) + break; + montype = MONITOR_RT2570; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "forceprism") == 0) { + /* + * RT73 driver, use this one. + * Do this after turning monitor mode on. + * Its argument is a *string*; you can + * set it to "1" to get DLT_PRISM or "2" + * to get DLT_IEEE80211. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_CHAR) + break; + if (priv[i].set_args & IW_PRIV_SIZE_FIXED) + break; + montype = MONITOR_RT73; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "prismhdr") == 0) { + /* + * One of the RTL8xxx drivers, use this one. + * It can only be done after monitor mode + * has been turned on. You can set it to 1 + * to get DLT_PRISM or 0 to get DLT_IEEE80211. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if (!(priv[i].set_args & IW_PRIV_SIZE_FIXED)) + break; + if ((priv[i].set_args & IW_PRIV_SIZE_MASK) != 1) + break; + montype = MONITOR_RTL8XXX; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "rfmontx") == 0) { + /* + * RT2500 or RT61 driver, use this one. + * It has one one-byte parameter; set + * u.data.length to 1 and u.data.pointer to + * point to the parameter. + * It doesn't itself turn monitor mode on. + * You can set it to 1 to allow transmitting + * in monitor mode(?) and get DLT_IEEE80211, + * or set it to 0 to disallow transmitting in + * monitor mode(?) and get DLT_PRISM. + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if ((priv[i].set_args & IW_PRIV_SIZE_MASK) != 2) + break; + montype = MONITOR_RT2500; + cmd = priv[i].cmd; + break; + } + if (strcmp(priv[i].name, "monitor") == 0) { + /* + * Either ACX100 or hostap, use this one. + * It turns monitor mode on. + * If it takes two arguments, it's ACX100; + * the first argument is 1 for DLT_PRISM + * or 2 for DLT_IEEE80211, and the second + * argument is the channel on which to + * run. If it takes one argument, it's + * HostAP, and the argument is 2 for + * DLT_IEEE80211 and 3 for DLT_PRISM. + * + * If we see this, we don't quit, as this + * might be a version of the hostap driver + * that also supports "monitor_type". + */ + if ((priv[i].set_args & IW_PRIV_TYPE_MASK) != IW_PRIV_TYPE_INT) + break; + if (!(priv[i].set_args & IW_PRIV_SIZE_FIXED)) + break; + switch (priv[i].set_args & IW_PRIV_SIZE_MASK) { + + case 1: + montype = MONITOR_PRISM; + cmd = priv[i].cmd; + break; + + case 2: + montype = MONITOR_ACX100; + cmd = priv[i].cmd; + break; + + default: + break; + } + } + } + free(priv); + + /* + * XXX - ipw3945? islism? + */ + + /* + * Get the old mode. + */ + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + if (ioctl(sock_fd, SIOCGIWMODE, &ireq) == -1) { + /* + * We probably won't be able to set the mode, either. + */ + return PCAP_ERROR_RFMON_NOTSUP; + } + + /* + * Is it currently in monitor mode? + */ + if (ireq.u.mode == IW_MODE_MONITOR) { + /* + * Yes. Just leave things as they are. + * We don't offer multiple link-layer types, as + * changing the link-layer type out from under + * somebody else capturing in monitor mode would + * be considered rude. + */ + return 1; + } + /* + * No. We have to put the adapter into rfmon mode. + */ + + /* + * If we haven't already done so, arrange to have + * "pcap_close_all()" called when we exit. + */ + if (!pcap_do_addexit(handle)) { + /* + * "atexit()" failed; don't put the interface + * in rfmon mode, just give up. + */ + return PCAP_ERROR_RFMON_NOTSUP; } - /* Any pending errors, e.g., network is down? */ + /* + * Save the old mode. + */ + handle->md.oldmode = ireq.u.mode; - if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "getsockopt: %s", pcap_strerror(errno)); - return -2; + /* + * Put the adapter in rfmon mode. How we do this depends + * on whether we have a special private ioctl or not. + */ + if (montype == MONITOR_PRISM) { + /* + * We have the "monitor" private ioctl, but none of + * the other private ioctls. Use this, and select + * the Prism header. + * + * If it fails, just fall back on SIOCSIWMODE. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + ireq.u.data.length = 1; /* 1 argument */ + args[0] = 3; /* request Prism header */ + memcpy(ireq.u.name, args, IFNAMSIZ); + if (ioctl(sock_fd, cmd, &ireq) != -1) { + /* + * Success. + * Note that we have to put the old mode back + * when we close the device. + */ + handle->md.must_do_on_close |= MUST_CLEAR_RFMON; + + /* + * Add this to the list of pcaps to close + * when we exit. + */ + pcap_add_to_pcaps_to_close(handle); + + return 1; + } + + /* + * Failure. Fall back on SIOCSIWMODE. + */ } - if (err > 0) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "bind: %s", pcap_strerror(err)); - return -2; + /* + * First, turn monitor mode on. + */ + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + ireq.u.mode = IW_MODE_MONITOR; + if (ioctl(sock_fd, SIOCSIWMODE, &ireq) == -1) { + /* + * Scientist, you've failed. + */ + return PCAP_ERROR_RFMON_NOTSUP; } - return 0; -} + /* + * XXX - airmon-ng does "iwconfig {if} key off" after setting + * monitor mode and setting the channel, and then does + * "iwconfig up". + */ -#endif + /* + * Now select the appropriate radio header. + */ + switch (montype) { + case MONITOR_WEXT: + /* + * We don't have any private ioctl to set the header. + */ + break; -/* ===== Functions to interface to the older kernels ================== */ + case MONITOR_HOSTAP: + /* + * Try to select the radiotap header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 3; /* request radiotap header */ + memcpy(ireq.u.name, args, sizeof (int)); + if (ioctl(sock_fd, cmd, &ireq) != -1) + break; /* success */ -/* - * With older kernels promiscuous mode is kind of interesting because we - * have to reset the interface before exiting. The problem can't really - * be solved without some daemon taking care of managing usage counts. - * If we put the interface into promiscuous mode, we set a flag indicating - * that we must take it out of that mode when the interface is closed, - * and, when closing the interface, if that flag is set we take it out - * of promiscuous mode. - */ + /* + * That failed. Try to select the AVS header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 2; /* request AVS header */ + memcpy(ireq.u.name, args, sizeof (int)); + if (ioctl(sock_fd, cmd, &ireq) != -1) + break; /* success */ -/* - * List of pcaps for which we turned promiscuous mode on by hand. - * If there are any such pcaps, we arrange to call "pcap_close_all()" - * when we exit, and have it close all of them to turn promiscuous mode - * off. - */ -static struct pcap *pcaps_to_close; + /* + * That failed. Try to select the Prism header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 1; /* request Prism header */ + memcpy(ireq.u.name, args, sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; -/* - * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to - * be called on exit. - */ -static int did_atexit; + case MONITOR_PRISM: + /* + * The private ioctl failed. + */ + break; -static void pcap_close_all(void) -{ - struct pcap *handle; + case MONITOR_PRISM54: + /* + * Select the Prism header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 3; /* request Prism header */ + memcpy(ireq.u.name, args, sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; - while ((handle = pcaps_to_close) != NULL) - pcap_close(handle); -} + case MONITOR_ACX100: + /* + * Get the current channel. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + if (ioctl(sock_fd, SIOCGIWFREQ, &ireq) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "%s: SIOCGIWFREQ: %s", device, + pcap_strerror(errno)); + return PCAP_ERROR; + } + channel = ireq.u.freq.m; -static void pcap_close_linux( pcap_t *handle ) -{ -#ifdef SITA - pcap_close_acn(handle); -#else - struct pcap *p, *prevp; - struct ifreq ifr; + /* + * Select the Prism header, and set the channel to the + * current value. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 1; /* request Prism header */ + args[1] = channel; /* set channel */ + memcpy(ireq.u.name, args, 2*sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; - if (handle->md.clear_promisc) { + case MONITOR_RT2500: /* - * We put the interface into promiscuous mode; take - * it out of promiscuous mode. - * - * XXX - if somebody else wants it in promiscuous mode, - * this code cannot know that, so it'll take it out - * of promiscuous mode. That's not fixable in 2.0[.x] - * kernels. + * Disallow transmission - that turns on the + * Prism header. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(ifr.ifr_name, handle->md.device, sizeof(ifr.ifr_name)); - if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) { - fprintf(stderr, - "Can't restore interface flags (SIOCGIFFLAGS failed: %s).\n" - "Please adjust manually.\n" - "Hint: This can't happen with Linux >= 2.2.0.\n", - strerror(errno)); - } else { - if (ifr.ifr_flags & IFF_PROMISC) { - /* - * Promiscuous mode is currently on; turn it - * off. - */ - ifr.ifr_flags &= ~IFF_PROMISC; - if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) { - fprintf(stderr, - "Can't restore interface flags (SIOCSIFFLAGS failed: %s).\n" - "Please adjust manually.\n" - "Hint: This can't happen with Linux >= 2.2.0.\n", - strerror(errno)); - } - } - } + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 0; /* disallow transmitting */ + memcpy(ireq.u.name, args, sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; + case MONITOR_RT2570: /* - * Take this pcap out of the list of pcaps for which we - * have to take the interface out of promiscuous mode. + * Force the Prism header. */ - for (p = pcaps_to_close, prevp = NULL; p != NULL; - prevp = p, p = p->md.next) { - if (p == handle) { - /* - * Found it. Remove it from the list. - */ - if (prevp == NULL) { - /* - * It was at the head of the list. - */ - pcaps_to_close = p->md.next; - } else { - /* - * It was in the middle of the list. - */ - prevp->md.next = p->md.next; - } - break; - } - } + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 1; /* request Prism header */ + memcpy(ireq.u.name, args, sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; + + case MONITOR_RT73: + /* + * Force the Prism header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + ireq.u.data.length = 1; /* 1 argument */ + ireq.u.data.pointer = "1"; + ireq.u.data.flags = 0; + ioctl(sock_fd, cmd, &ireq); + break; + + case MONITOR_RTL8XXX: + /* + * Force the Prism header. + */ + memset(&ireq, 0, sizeof ireq); + strncpy(ireq.ifr_ifrn.ifrn_name, device, + sizeof ireq.ifr_ifrn.ifrn_name); + ireq.ifr_ifrn.ifrn_name[sizeof ireq.ifr_ifrn.ifrn_name - 1] = 0; + args[0] = 1; /* request Prism header */ + memcpy(ireq.u.name, args, sizeof (int)); + ioctl(sock_fd, cmd, &ireq); + break; } - if (handle->md.device != NULL) - free(handle->md.device); - handle->md.device = NULL; - pcap_close_common(handle); -#endif /* SITA */ + /* + * Note that we have to put the old mode back when we + * close the device. + */ + handle->md.must_do_on_close |= MUST_CLEAR_RFMON; + + /* + * Add this to the list of pcaps to close when we exit. + */ + pcap_add_to_pcaps_to_close(handle); + + return 1; +} +#endif /* IW_MODE_MONITOR */ + +/* + * Try various mechanisms to enter monitor mode. + */ +static int +enter_rfmon_mode(pcap_t *handle, int sock_fd, const char *device) +{ +#if defined(HAVE_LIBNL) || defined(IW_MODE_MONITOR) + int ret; +#endif + +#ifdef HAVE_LIBNL + ret = enter_rfmon_mode_mac80211(handle, sock_fd, device); + if (ret < 0) + return ret; /* error attempting to do so */ + if (ret == 1) + return 1; /* success */ +#endif /* HAVE_LIBNL */ + +#ifdef IW_MODE_MONITOR + ret = enter_rfmon_mode_wext(handle, sock_fd, device); + if (ret < 0) + return ret; /* error attempting to do so */ + if (ret == 1) + return 1; /* success */ +#endif /* IW_MODE_MONITOR */ + + /* + * Either none of the mechanisms we know about work or none + * of those mechanisms are available, so we can't do monitor + * mode. + */ + return 0; } +#endif /* HAVE_PF_PACKET_SOCKETS */ + +/* ===== Functions to interface to the older kernels ================== */ + /* - * Try to open a packet socket using the old kernel interface. - * Returns 0 on failure. - * FIXME: 0 uses to mean success (Sebastian) + * Try to open a packet socket using the old kernel interface. + * Returns 1 on success and a PCAP_ERROR_ value on an error. */ static int -live_open_old(pcap_t *handle, const char *device, int promisc, - int to_ms, char *ebuf) +activate_old(pcap_t *handle) { int arptype; struct ifreq ifr; + const char *device = handle->opt.source; + struct utsname utsname; + int mtu; - do { - /* Open the socket */ + /* Open the socket */ - handle->fd = socket(PF_INET, SOCK_PACKET, htons(ETH_P_ALL)); - if (handle->fd == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "socket: %s", pcap_strerror(errno)); - break; - } + handle->fd = socket(PF_INET, SOCK_PACKET, htons(ETH_P_ALL)); + if (handle->fd == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "socket: %s", pcap_strerror(errno)); + return PCAP_ERROR_PERM_DENIED; + } - /* It worked - we are using the old interface */ - handle->md.sock_packet = 1; + /* It worked - we are using the old interface */ + handle->md.sock_packet = 1; - /* ...which means we get the link-layer header. */ - handle->md.cooked = 0; + /* ...which means we get the link-layer header. */ + handle->md.cooked = 0; - /* Bind to the given device */ + /* Bind to the given device */ - if (!device) { - strncpy(ebuf, "pcap_open_live: The \"any\" device isn't supported on 2.0[.x]-kernel systems", - PCAP_ERRBUF_SIZE); - break; - } - if (iface_bind_old(handle->fd, device, ebuf) == -1) - break; + if (strcmp(device, "any") == 0) { + strncpy(handle->errbuf, "pcap_activate: The \"any\" device isn't supported on 2.0[.x]-kernel systems", + PCAP_ERRBUF_SIZE); + return PCAP_ERROR; + } + if (iface_bind_old(handle->fd, device, handle->errbuf) == -1) + return PCAP_ERROR; - /* - * Try to get the link-layer type. - */ - arptype = iface_get_arptype(handle->fd, device, ebuf); - if (arptype == -1) - break; + /* + * Try to get the link-layer type. + */ + arptype = iface_get_arptype(handle->fd, device, handle->errbuf); + if (arptype < 0) + return PCAP_ERROR; - /* - * Try to find the DLT_ type corresponding to that - * link-layer type. - */ - map_arphrd_to_dlt(handle, arptype, 0); - if (handle->linktype == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "unknown arptype %d", arptype); - break; - } + /* + * Try to find the DLT_ type corresponding to that + * link-layer type. + */ + map_arphrd_to_dlt(handle, arptype, 0); + if (handle->linktype == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "unknown arptype %d", arptype); + return PCAP_ERROR; + } - /* Go to promisc mode if requested */ + /* Go to promisc mode if requested */ - if (promisc) { - memset(&ifr, 0, sizeof(ifr)); - strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name)); - if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "SIOCGIFFLAGS: %s", pcap_strerror(errno)); - break; - } - if ((ifr.ifr_flags & IFF_PROMISC) == 0) { - /* - * Promiscuous mode isn't currently on, - * so turn it on, and remember that - * we should turn it off when the - * pcap_t is closed. - */ + if (handle->opt.promisc) { + memset(&ifr, 0, sizeof(ifr)); + strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name)); + if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "SIOCGIFFLAGS: %s", pcap_strerror(errno)); + return PCAP_ERROR; + } + if ((ifr.ifr_flags & IFF_PROMISC) == 0) { + /* + * Promiscuous mode isn't currently on, + * so turn it on, and remember that + * we should turn it off when the + * pcap_t is closed. + */ + /* + * If we haven't already done so, arrange + * to have "pcap_close_all()" called when + * we exit. + */ + if (!pcap_do_addexit(handle)) { /* - * If we haven't already done so, arrange - * to have "pcap_close_all()" called when - * we exit. + * "atexit()" failed; don't put + * the interface in promiscuous + * mode, just give up. */ - if (!did_atexit) { - if (atexit(pcap_close_all) == -1) { - /* - * "atexit()" failed; don't - * put the interface in - * promiscuous mode, just - * give up. - */ - strncpy(ebuf, "atexit failed", - PCAP_ERRBUF_SIZE); - break; - } - did_atexit = 1; - } - - ifr.ifr_flags |= IFF_PROMISC; - if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) { - snprintf(ebuf, PCAP_ERRBUF_SIZE, - "SIOCSIFFLAGS: %s", - pcap_strerror(errno)); - break; - } - handle->md.clear_promisc = 1; + return PCAP_ERROR; + } - /* - * Add this to the list of pcaps - * to close when we exit. - */ - handle->md.next = pcaps_to_close; - pcaps_to_close = handle; + ifr.ifr_flags |= IFF_PROMISC; + if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, + "SIOCSIFFLAGS: %s", + pcap_strerror(errno)); + return PCAP_ERROR; } + handle->md.must_do_on_close |= MUST_CLEAR_PROMISC; + + /* + * Add this to the list of pcaps + * to close when we exit. + */ + pcap_add_to_pcaps_to_close(handle); } + } + /* + * Compute the buffer size. + * + * We're using SOCK_PACKET, so this might be a 2.0[.x] + * kernel, and might require special handling - check. + */ + if (uname(&utsname) < 0 || + strncmp(utsname.release, "2.0", 3) == 0) { + /* + * Either we couldn't find out what kernel release + * this is, or it's a 2.0[.x] kernel. + * + * In the 2.0[.x] kernel, a "recvfrom()" on + * a SOCK_PACKET socket, with MSG_TRUNC set, will + * return the number of bytes read, so if we pass + * a length based on the snapshot length, it'll + * return the number of bytes from the packet + * copied to userland, not the actual length + * of the packet. + * + * This means that, for example, the IP dissector + * in tcpdump will get handed a packet length less + * than the length in the IP header, and will + * complain about "truncated-ip". + * + * So we don't bother trying to copy from the + * kernel only the bytes in which we're interested, + * but instead copy them all, just as the older + * versions of libpcap for Linux did. + * + * The buffer therefore needs to be big enough to + * hold the largest packet we can get from this + * device. Unfortunately, we can't get the MRU + * of the network; we can only get the MTU. The + * MTU may be too small, in which case a packet larger + * than the buffer size will be truncated *and* we + * won't get the actual packet size. + * + * However, if the snapshot length is larger than + * the buffer size based on the MTU, we use the + * snapshot length as the buffer size, instead; + * this means that with a sufficiently large snapshot + * length we won't artificially truncate packets + * to the MTU-based size. + * + * This mess just one of many problems with packet + * capture on 2.0[.x] kernels; you really want a + * 2.2[.x] or later kernel if you want packet capture + * to work well. + */ + mtu = iface_get_mtu(handle->fd, device, handle->errbuf); + if (mtu == -1) + return PCAP_ERROR; + handle->bufsize = MAX_LINKHEADER_SIZE + mtu; + if (handle->bufsize < handle->snapshot) + handle->bufsize = handle->snapshot; + } else { /* - * Default value for offset to align link-layer payload - * on a 4-byte boundary. + * This is a 2.2[.x] or later kernel. + * + * We can safely pass "recvfrom()" a byte count + * based on the snapshot length. */ - handle->offset = 0; - - return 1; + handle->bufsize = handle->snapshot; + } - } while (0); + /* + * Default value for offset to align link-layer payload + * on a 4-byte boundary. + */ + handle->offset = 0; - pcap_close_linux(handle); - return 0; + return 1; } /* @@ -2383,7 +4833,13 @@ iface_get_arptype(int fd, const char *device, char *ebuf) if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) { snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCGIFHWADDR: %s", pcap_strerror(errno)); - return -1; + if (errno == ENODEV) { + /* + * No such device. + */ + return PCAP_ERROR_NO_SUCH_DEVICE; + } + return PCAP_ERROR; } return ifr.ifr_hwaddr.sa_family; @@ -2391,7 +4847,7 @@ iface_get_arptype(int fd, const char *device, char *ebuf) #ifdef SO_ATTACH_FILTER static int -fix_program(pcap_t *handle, struct sock_fprog *fcode) +fix_program(pcap_t *handle, struct sock_fprog *fcode, int is_mmapped) { size_t prog_size; register int i; @@ -2407,7 +4863,7 @@ fix_program(pcap_t *handle, struct sock_fprog *fcode) len = handle->fcode.bf_len; f = (struct bpf_insn *)malloc(prog_size); if (f == NULL) { - snprintf(handle->errbuf, sizeof(handle->errbuf), + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno)); return -1; } @@ -2424,26 +4880,33 @@ fix_program(pcap_t *handle, struct sock_fprog *fcode) case BPF_RET: /* - * It's a return instruction; is the snapshot - * length a constant, rather than the contents - * of the accumulator? + * It's a return instruction; are we capturing + * in memory-mapped mode? */ - if (BPF_MODE(p->code) == BPF_K) { + if (!is_mmapped) { /* - * Yes - if the value to be returned, - * i.e. the snapshot length, is anything - * other than 0, make it 65535, so that - * the packet is truncated by "recvfrom()", - * not by the filter. - * - * XXX - there's nothing we can easily do - * if it's getting the value from the - * accumulator; we'd have to insert - * code to force non-zero values to be - * 65535. + * No; is the snapshot length a constant, + * rather than the contents of the + * accumulator? */ - if (p->k != 0) - p->k = 65535; + if (BPF_MODE(p->code) == BPF_K) { + /* + * Yes - if the value to be returned, + * i.e. the snapshot length, is + * anything other than 0, make it + * 65535, so that the packet is + * truncated by "recvfrom()", + * not by the filter. + * + * XXX - there's nothing we can + * easily do if it's getting the + * value from the accumulator; we'd + * have to insert code to force + * non-zero values to be 65535. + */ + if (p->k != 0) + p->k = 65535; + } } break; @@ -2579,7 +5042,7 @@ set_kernel_filter(pcap_t *handle, struct sock_fprog *fcode) if (save_errno != EAGAIN) { /* Fatal error */ reset_kernel_filter(handle); - snprintf(handle->errbuf, sizeof(handle->errbuf), + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "recv: %s", pcap_strerror(save_errno)); return -2; }