size_t errbuflen_remaining;
va_start(ap, fmt);
- pcap_vsnprintf(errbuf, errbuflen, fmt, ap);
+ vsnprintf(errbuf, errbuflen, fmt, ap);
va_end(ap);
msglen = strlen(errbuf);
* buffer (based on the "PER_LCORE" in "RTE_DEFINE_PER_LCORE" used
* to declare the buffers statically) for DPDK errors.
*/
- pcap_snprintf(p, errbuflen_remaining, "%s", rte_strerror(errnum));
+ snprintf(p, errbuflen_remaining, "%s", rte_strerror(errnum));
}
static int dpdk_init_timer(struct pcap_dpdk *pd){
{
int offset=0;
if (addrp == NULL){
- pcap_snprintf(mac_str, len-1, DPDK_DEF_MAC_ADDR);
+ snprintf(mac_str, len-1, DPDK_DEF_MAC_ADDR);
return;
}
for (int i=0; i<6; i++)
}
if (i==0)
{
- pcap_snprintf(mac_str+offset, len-1-offset, "%02X",addrp->addr_bytes[i]);
+ snprintf(mac_str+offset, len-1-offset, "%02X",addrp->addr_bytes[i]);
offset+=2; // FF
}else{
- pcap_snprintf(mac_str+offset, len-1-offset, ":%02X", addrp->addr_bytes[i]);
+ snprintf(mac_str+offset, len-1-offset, ":%02X", addrp->addr_bytes[i]);
offset+=3; // :FF
}
}
if (eaccess_not_fatal)
return 0;
// Otherwise report a fatal error.
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"DPDK requires that it run as root");
return PCAP_ERROR_PERM_DENIED;
// be attempted again."
// There's no such error in pcap, so I'm
// not sure what we should do here.
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"Bus or system resource was not available");
break;
case EFAULT:
// This "indicates the tailq configuration
// name was not found in memory configuration."
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"The tailq configuration name was not found in the memory configuration");
return PCAP_ERROR;
// This "indicates invalid parameters were
// passed as argv/argc." Those came from
// the configuration file.
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"The configuration file has invalid parameters");
break;
case ENOMEM:
// This "indicates failure likely caused by
// an out-of-memory condition."
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"Out of memory");
break;
case ENODEV:
// This "indicates memory setup issues."
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"An error occurred setting up memory");
break;
// as a "not available" case? If not, we
// can't distinguish between the two, so
// we're stuck.
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"PCI bus is not present or not readable by the EAL");
break;
case ENOEXEC:
// This "indicates that a service core
// failed to launch successfully."
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"A service core failed to launch successfully");
break;
if (ret < 0)
{
// This returns a negative value on an error.
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"Can't open device %s: %s",
p->opt.device, dpdk_pre_init_errbuf);
// ret is set to the correct error
if (ret == 0)
{
// This means DPDK isn't available on this machine.
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"Can't open device %s: DPDK is not available on this machine",
p->opt.device);
return PCAP_ERROR_NO_SUCH_DEVICE;
ret = dpdk_init_timer(pd);
if (ret<0)
{
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"dpdk error: Init timer is zero with device %s",
p->opt.device);
ret = PCAP_ERROR;
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
{
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"dpdk error: No Ethernet ports");
ret = PCAP_ERROR;
break;
portid = portid_by_device(p->opt.device);
if (portid == DPDK_PORTID_MAX){
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"dpdk error: portid is invalid. device %s",
p->opt.device);
ret = PCAP_ERROR_NO_SUCH_DEVICE;
rte_eth_dev_socket_id(portid));
if (tx_buffer == NULL)
{
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"dpdk error: Cannot allocate buffer for tx on port %u", portid);
ret = PCAP_ERROR;
break;
// check link status
is_port_up = check_link_status(portid, &link);
if (!is_port_up){
- pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"dpdk error: link is down, port=%u",portid);
ret = PCAP_ERROR_IFACE_NOT_UP;
break;
if (ret < 0)
{
// This returns a negative value on an error.
- pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(ebuf, PCAP_ERRBUF_SIZE,
"Can't look for DPDK devices: %s",
dpdk_pre_init_errbuf);
ret = PCAP_ERROR;
break;
}
for (unsigned int i=0; i<nb_ports; i++){
- pcap_snprintf(dpdk_name, DPDK_DEV_NAME_MAX-1,
+ snprintf(dpdk_name, DPDK_DEV_NAME_MAX-1,
"%s%u", DPDK_PREFIX, i);
// mac addr
rte_eth_macaddr_get(i, ð_addr);
eth_addr_str(ð_addr,mac_addr,DPDK_MAC_ADDR_SIZE);
// PCI addr
rte_eth_dev_get_name_by_port(i,pci_addr);
- pcap_snprintf(dpdk_desc,DPDK_DEV_DESC_MAX-1,"%s %s, MAC:%s, PCI:%s", DPDK_DESC, dpdk_name, mac_addr, pci_addr);
+ snprintf(dpdk_desc,DPDK_DEV_DESC_MAX-1,"%s %s, MAC:%s, PCI:%s", DPDK_DESC, dpdk_name, mac_addr, pci_addr);
if (add_dev(devlistp, dpdk_name, 0, dpdk_desc, ebuf)==NULL){
ret = PCAP_ERROR;
break;
pcap_t *
pcap_create_interface(const char *device, char *errbuf)
{
- pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
+ snprintf(errbuf, PCAP_ERRBUF_SIZE,
"This version of libpcap only supports DPDK");
return NULL;
}
projects / libpcap / blobdiff