- if (linktype == DLT_ARCNET || linktype == DLT_ARCNET_LINUX)
- /* all ARCnet multicasts use the same address */
- return gen_ahostop(abroadcast, Q_DST);
-
- if (linktype == DLT_EN10MB) {
- /* ether[0] & 1 != 0 */
- return gen_mac_multicast(0);
- }
-
- if (linktype == DLT_FDDI) {
- /*
- * XXX TEST THIS: MIGHT NOT PORT PROPERLY XXX
- *
- * XXX - was that referring to bit-order issues?
- */
- /* fddi[1] & 1 != 0 */
- return gen_mac_multicast(1);
- }
-
- if (linktype == DLT_IEEE802) {
- /* tr[2] & 1 != 0 */
- return gen_mac_multicast(2);
- }
-
- if (linktype == DLT_IEEE802_11 ||
- linktype == DLT_IEEE802_11_RADIO_AVS ||
- linktype == DLT_IEEE802_11_RADIO ||
- linktype == DLT_PRISM_HEADER) {
- /*
- * Oh, yuk.
- *
- * For control frames, there is no DA.
- *
- * For management frames, DA is at an
- * offset of 4 from the beginning of
- * the packet.
- *
- * For data frames, DA is at an offset
- * of 4 from the beginning of the packet
- * if To DS is clear and at an offset of
- * 16 from the beginning of the packet
- * if To DS is set.
- */
-
- /*
- * Generate the tests to be done for data frames.
- *
- * First, check for To DS set, i.e. "link[1] & 0x01".
- */
- s = gen_load_a(OR_LINK, 1, BPF_B);
- b1 = new_block(JMP(BPF_JSET));
- b1->s.k = 0x01; /* To DS */
- b1->stmts = s;
-
- /*
- * If To DS is set, the DA is at 16.
- */
- b0 = gen_mac_multicast(16);
- gen_and(b1, b0);
-
- /*
- * Now, check for To DS not set, i.e. check
- * "!(link[1] & 0x01)".
- */
- s = gen_load_a(OR_LINK, 1, BPF_B);
- b2 = new_block(JMP(BPF_JSET));
- b2->s.k = 0x01; /* To DS */
- b2->stmts = s;
- gen_not(b2);
-
- /*
- * If To DS is not set, the DA is at 4.
- */
- b1 = gen_mac_multicast(4);
- gen_and(b2, b1);
-
- /*
- * Now OR together the last two checks. That gives
- * the complete set of checks for data frames.
- */
- gen_or(b1, b0);
-
- /*
- * Now check for a data frame.
- * I.e, check "link[0] & 0x08".
- */
- s = gen_load_a(OR_LINK, 0, BPF_B);
- b1 = new_block(JMP(BPF_JSET));
- b1->s.k = 0x08;
- b1->stmts = s;
-
- /*
- * AND that with the checks done for data frames.
- */
- gen_and(b1, b0);
-
- /*
- * If the high-order bit of the type value is 0, this
- * is a management frame.
- * I.e, check "!(link[0] & 0x08)".
- */
- s = gen_load_a(OR_LINK, 0, BPF_B);
- b2 = new_block(JMP(BPF_JSET));
- b2->s.k = 0x08;
- b2->stmts = s;
- gen_not(b2);
-
- /*
- * For management frames, the DA is at 4.
- */
- b1 = gen_mac_multicast(4);
- gen_and(b2, b1);
-
- /*
- * OR that with the checks done for data frames.
- * That gives the checks done for management and
- * data frames.
- */
- gen_or(b1, b0);
-
- /*
- * If the low-order bit of the type value is 1,
- * this is either a control frame or a frame
- * with a reserved type, and thus not a
- * frame with an SA.
- *
- * I.e., check "!(link[0] & 0x04)".
- */
- s = gen_load_a(OR_LINK, 0, BPF_B);
- b1 = new_block(JMP(BPF_JSET));
- b1->s.k = 0x04;
- b1->stmts = s;
- gen_not(b1);
-
- /*
- * AND that with the checks for data and management
- * frames.
- */
- gen_and(b1, b0);
- return b0;
- }
-
- if (linktype == DLT_IP_OVER_FC) {
- b0 = gen_mac_multicast(2);
- return b0;
- }
-
- if (linktype == DLT_SUNATM && is_lane) {
+ switch (linktype) {
+ case DLT_ARCNET:
+ case DLT_ARCNET_LINUX:
+ /* all ARCnet multicasts use the same address */
+ return gen_ahostop(abroadcast, Q_DST);
+ case DLT_EN10MB:
+ /* ether[0] & 1 != 0 */
+ return gen_mac_multicast(0);
+ case DLT_FDDI:
+ /*
+ * XXX TEST THIS: MIGHT NOT PORT PROPERLY XXX
+ *
+ * XXX - was that referring to bit-order issues?
+ */
+ /* fddi[1] & 1 != 0 */
+ return gen_mac_multicast(1);
+ case DLT_IEEE802:
+ /* tr[2] & 1 != 0 */
+ return gen_mac_multicast(2);
+ case DLT_IEEE802_11:
+ case DLT_IEEE802_11_RADIO_AVS:
+ case DLT_PPI:
+ case DLT_IEEE802_11_RADIO:
+ case DLT_PRISM_HEADER:
+ /*
+ * Oh, yuk.
+ *
+ * For control frames, there is no DA.
+ *
+ * For management frames, DA is at an
+ * offset of 4 from the beginning of
+ * the packet.
+ *
+ * For data frames, DA is at an offset
+ * of 4 from the beginning of the packet
+ * if To DS is clear and at an offset of
+ * 16 from the beginning of the packet
+ * if To DS is set.
+ */
+
+ /*
+ * Generate the tests to be done for data frames.
+ *
+ * First, check for To DS set, i.e. "link[1] & 0x01".
+ */
+ s = gen_load_a(OR_LINK, 1, BPF_B);
+ b1 = new_block(JMP(BPF_JSET));
+ b1->s.k = 0x01; /* To DS */
+ b1->stmts = s;
+
+ /*
+ * If To DS is set, the DA is at 16.
+ */
+ b0 = gen_mac_multicast(16);
+ gen_and(b1, b0);
+
+ /*
+ * Now, check for To DS not set, i.e. check
+ * "!(link[1] & 0x01)".
+ */
+ s = gen_load_a(OR_LINK, 1, BPF_B);
+ b2 = new_block(JMP(BPF_JSET));
+ b2->s.k = 0x01; /* To DS */
+ b2->stmts = s;
+ gen_not(b2);
+
+ /*
+ * If To DS is not set, the DA is at 4.
+ */
+ b1 = gen_mac_multicast(4);
+ gen_and(b2, b1);
+
+ /*
+ * Now OR together the last two checks. That gives
+ * the complete set of checks for data frames.
+ */
+ gen_or(b1, b0);
+
+ /*
+ * Now check for a data frame.
+ * I.e, check "link[0] & 0x08".
+ */
+ s = gen_load_a(OR_LINK, 0, BPF_B);
+ b1 = new_block(JMP(BPF_JSET));
+ b1->s.k = 0x08;
+ b1->stmts = s;
+
+ /*
+ * AND that with the checks done for data frames.
+ */
+ gen_and(b1, b0);
+
+ /*
+ * If the high-order bit of the type value is 0, this
+ * is a management frame.
+ * I.e, check "!(link[0] & 0x08)".
+ */
+ s = gen_load_a(OR_LINK, 0, BPF_B);
+ b2 = new_block(JMP(BPF_JSET));
+ b2->s.k = 0x08;
+ b2->stmts = s;
+ gen_not(b2);
+
+ /*
+ * For management frames, the DA is at 4.
+ */
+ b1 = gen_mac_multicast(4);
+ gen_and(b2, b1);
+
+ /*
+ * OR that with the checks done for data frames.
+ * That gives the checks done for management and
+ * data frames.
+ */
+ gen_or(b1, b0);
+
+ /*
+ * If the low-order bit of the type value is 1,
+ * this is either a control frame or a frame
+ * with a reserved type, and thus not a
+ * frame with an SA.
+ *
+ * I.e., check "!(link[0] & 0x04)".
+ */
+ s = gen_load_a(OR_LINK, 0, BPF_B);
+ b1 = new_block(JMP(BPF_JSET));
+ b1->s.k = 0x04;
+ b1->stmts = s;
+ gen_not(b1);
+
+ /*
+ * AND that with the checks for data and management
+ * frames.
+ */
+ gen_and(b1, b0);
+ return b0;
+ case DLT_IP_OVER_FC:
+ b0 = gen_mac_multicast(2);
+ return b0;
+ case DLT_SUNATM:
+ if (is_lane) {
projects / libpcap / blobdiff