*/
#ifdef HAVE_CONFIG_H
-#include "config.h"
+#include <config.h>
#endif
+#include <pcap-types.h>
#ifdef _WIN32
-#include <pcap-stdinc.h>
-#else /* _WIN32 */
-#if HAVE_INTTYPES_H
-#include <inttypes.h>
-#elif HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_SYS_BITYPES_H
-#include <sys/bitypes.h>
-#endif
-#include <sys/types.h>
-#include <sys/socket.h>
-#endif /* _WIN32 */
-
-#ifndef _WIN32
-
-#ifdef __NetBSD__
-#include <sys/param.h>
-#endif
+ #include <ws2tcpip.h>
+#else
+ #include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
+ #ifdef __NetBSD__
+ #include <sys/param.h>
+ #endif
+ #include <netinet/in.h>
+ #include <arpa/inet.h>
#endif /* _WIN32 */
#include <stdlib.h>
{
union
{
- u_int8_t u6_addr8[16];
- u_int16_t u6_addr16[8];
- u_int32_t u6_addr32[4];
+ uint8_t u6_addr8[16];
+ uint16_t u6_addr16[8];
+ uint32_t u6_addr32[4];
} in6_u;
#define s6_addr in6_u.u6_addr8
#define s6_addr16 in6_u.u6_addr16
struct sockaddr_in6
{
__SOCKADDR_COMMON (sin6_);
- u_int16_t sin6_port; /* Transport layer port # */
- u_int32_t sin6_flowinfo; /* IPv6 flow information */
+ uint16_t sin6_port; /* Transport layer port # */
+ uint32_t sin6_flowinfo; /* IPv6 flow information */
struct in6_addr sin6_addr; /* IPv6 address */
};
{
struct block *b0, *b1;
u_int offset;
- u_int32_t *a, *m;
+ uint32_t *a, *m;
switch (dir) {
abort();
}
/* this order is important */
- a = (u_int32_t *)addr;
- m = (u_int32_t *)mask;
+ a = (uint32_t *)addr;
+ m = (uint32_t *)mask;
b1 = gen_mcmp(cstate, OR_LINKPL, offset + 12, BPF_W, ntohl(a[3]), ntohl(m[3]));
b0 = gen_mcmp(cstate, OR_LINKPL, offset + 8, BPF_W, ntohl(a[2]), ntohl(m[2]));
gen_and(b0, b1);
struct in6_addr *addr;
struct in6_addr mask;
struct block *b;
- u_int32_t *a, *m;
+ uint32_t *a, *m;
if (s2)
bpf_error(cstate, "no mask %s supported", s2);
(0xff << (8 - masklen % 8)) & 0xff;
}
- a = (u_int32_t *)addr;
- m = (u_int32_t *)&mask;
+ a = (uint32_t *)addr;
+ m = (uint32_t *)&mask;
if ((a[0] & ~m[0]) || (a[1] & ~m[1])
|| (a[2] & ~m[2]) || (a[3] & ~m[3])) {
bpf_error(cstate, "non-network bits set in \"%s/%d\"", s1, masklen);
/* NOTREACHED */
}
+static struct block *
+gen_vlan_tpid_test(compiler_state_t *cstate)
+{
+ struct block *b0, *b1;
+
+ /* check for VLAN, including QinQ */
+ b0 = gen_linktype(cstate, ETHERTYPE_8021Q);
+ b1 = gen_linktype(cstate, ETHERTYPE_8021AD);
+ gen_or(b0,b1);
+ b0 = b1;
+ b1 = gen_linktype(cstate, ETHERTYPE_8021QINQ);
+ gen_or(b0,b1);
+
+ return b1;
+}
+
+static struct block *
+gen_vlan_vid_test(compiler_state_t *cstate, int vlan_num)
+{
+ return gen_mcmp(cstate, OR_LINKPL, 0, BPF_H, (bpf_int32)vlan_num, 0x0fff);
+}
+
+static struct block *
+gen_vlan_no_bpf_extensions(compiler_state_t *cstate, int vlan_num)
+{
+ struct block *b0, *b1;
+
+ b0 = gen_vlan_tpid_test(cstate);
+
+ if (vlan_num >= 0) {
+ b1 = gen_vlan_vid_test(cstate, vlan_num);
+ gen_and(b0, b1);
+ b0 = b1;
+ }
+
+ /*
+ * Both payload and link header type follow the VLAN tags so that
+ * both need to be updated.
+ */
+ cstate->off_linkpl.constant_part += 4;
+ cstate->off_linktype.constant_part += 4;
+
+ return b0;
+}
+
+#if defined(SKF_AD_VLAN_TAG) && defined(SKF_AD_VLAN_TAG_PRESENT)
+/* add v to variable part of off */
static void
gen_vlan_vloffset_add(compiler_state_t *cstate, bpf_abs_offset *off, int v, struct slist *s)
{
sappend(s, s2);
}
-static struct block *
-gen_vlan_no_bpf_extensions(compiler_state_t *cstate, int vlan_num, int vloff)
-{
- struct block *b0, *b1, *b_ins;
-
- /* check for VLAN, including QinQ */
- b0 = gen_linktype(cstate, ETHERTYPE_8021Q);
- b_ins = b0;
- b1 = gen_linktype(cstate, ETHERTYPE_8021AD);
- gen_or(b0,b1);
- b0 = b1;
- b1 = gen_linktype(cstate, ETHERTYPE_8021QINQ);
- gen_or(b0,b1);
- b0 = b1;
-
- /* If a specific VLAN is requested, check VLAN id */
- if (vlan_num >= 0) {
- b1 = gen_mcmp(cstate, OR_LINKPL, 0, BPF_H,
- (bpf_int32)vlan_num, 0x0fff);
- gen_and(b0, b1);
- b0 = b1;
- }
+/*
+ * patch block b_tpid (VLAN TPID test) to update variable parts of link payload
+ * and link type offsets first
+ */
+static void
+gen_vlan_patch_tpid_test(compiler_state_t *cstate, struct block *b_tpid)
+{
+ struct slist s;
- /*
- * Both payload and link header type follow the VLAN tags so that
- * both need to be updated.
- */
- if (vloff) {
- /* offset determined at run time, shift variable part */
- struct slist s;
-
- s.next = NULL;
- cstate->is_vlan_vloffset = 1;
- gen_vlan_vloffset_add(cstate, &cstate->off_linkpl, 4, &s);
- gen_vlan_vloffset_add(cstate, &cstate->off_linktype, 4, &s);
-
- /*
- * This is tricky. We need to insert the statements updating
- * variable parts of offsets before the VCI checks above but
- * we do not want this update to affect those checks. That's
- * why we generate them later and insert them there.
- * This wouldn't work if there already were variable length
- * link header when entering this function but we cannot get
- * here in that case.
- */
- sappend(s.next, b_ins->stmts);
- b_ins->stmts = s.next;
- } else {
- /* offset determined at compile time, shift constant part */
- cstate->off_linkpl.constant_part += 4;
- cstate->off_linktype.constant_part += 4;
- }
+ /* offset determined at run time, shift variable part */
+ s.next = NULL;
+ cstate->is_vlan_vloffset = 1;
+ gen_vlan_vloffset_add(cstate, &cstate->off_linkpl, 4, &s);
+ gen_vlan_vloffset_add(cstate, &cstate->off_linktype, 4, &s);
- return b0;
+ /* we get a pointer to a chain of or-ed blocks, patch first of them */
+ sappend(s.next, b_tpid->head->stmts);
+ b_tpid->head->stmts = s.next;
}
-#if defined(SKF_AD_VLAN_TAG) && defined(SKF_AD_VLAN_TAG_PRESENT)
+/*
+ * patch block b_vid (VLAN id test) to load VID value either from packet
+ * metadata (using BPF extensions) if SKF_AD_VLAN_TAG_PRESENT is true
+ */
+static void
+gen_vlan_patch_vid_test(compiler_state_t *cstate, struct block *b_vid)
+{
+ struct slist *s, *s2, *sjeq;
+ unsigned cnt;
+
+ s = new_stmt(cstate, BPF_LD|BPF_B|BPF_ABS);
+ s->s.k = SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT;
+
+ /* true -> next instructions, false -> beginning of b_vid */
+ sjeq = new_stmt(cstate, JMP(BPF_JEQ));
+ sjeq->s.k = 1;
+ sjeq->s.jf = b_vid->stmts;
+ sappend(s, sjeq);
+
+ s2 = new_stmt(cstate, BPF_LD|BPF_B|BPF_ABS);
+ s2->s.k = SKF_AD_OFF + SKF_AD_VLAN_TAG;
+ sappend(s, s2);
+ sjeq->s.jt = s2;
+
+ /* jump to the test in b_vid (bypass loading VID from packet data) */
+ cnt = 0;
+ for (s2 = b_vid->stmts; s2; s2 = s2->next)
+ cnt++;
+ s2 = new_stmt(cstate, JMP(BPF_JA));
+ s2->s.k = cnt;
+ sappend(s, s2);
+
+ /* insert our statements at the beginning of b_vid */
+ sappend(s, b_vid->stmts);
+ b_vid->stmts = s;
+}
+
+/*
+ * Generate check for "vlan" or "vlan <id>" on systems with support for BPF
+ * extensions. Even if kernel supports VLAN BPF extensions, (outermost) VLAN
+ * tag can be either in metadata or in packet data; therefore if the
+ * SKF_AD_VLAN_TAG_PRESENT test is negative, we need to check link
+ * header for VLAN tag. As the decision is done at run time, we need
+ * update variable part of the offsets
+ */
static struct block *
gen_vlan_bpf_extensions(compiler_state_t *cstate, int vlan_num)
{
- struct block *b0, *b1;
+ struct block *b0, *b_tpid, *b_vid;
struct slist *s;
/* generate new filter code based on extracting packet
b0->stmts = s;
b0->s.k = 1;
- if (vlan_num >= 0) {
- s = new_stmt(cstate, BPF_LD|BPF_B|BPF_ABS);
- s->s.k = SKF_AD_OFF + SKF_AD_VLAN_TAG;
-
- b1 = new_block(cstate, JMP(BPF_JEQ));
- b1->stmts = s;
- b1->s.k = (bpf_int32) vlan_num;
-
- gen_and(b0,b1);
- b0 = b1;
- }
-
/*
- * Even if kernel supports VLAN BPF extensions, (outermost) VLAN tag
- * can be either in metadata or in packet data; therefore if the
- * SK_AD_VLAN_TAG_PRESENT test is negative, we need to check link
- * header for VLAN tag. As the decision is done at run time,
- * we need gen_vlan_no_bpf_extensions() to update variable part of
- * the offsets rather than constant part.
+ * This is tricky. We need to insert the statements updating variable
+ * parts of offsets before the the traditional TPID and VID tests so
+ * that they are called whenever SKF_AD_VLAN_TAG_PRESENT fails but
+ * we do not want this update to affect those checks. That's why we
+ * generate both test blocks first and insert the statements updating
+ * variable parts of both offsets after that. This wouldn't work if
+ * there already were variable length link header when entering this
+ * function but gen_vlan_bpf_extensions() isn't called in that case.
*/
- b1 = gen_vlan_no_bpf_extensions(cstate, vlan_num, 1);
- gen_or(b0, b1);
- b0 = b1;
+ b_tpid = gen_vlan_tpid_test(cstate);
+ if (vlan_num >= 0)
+ b_vid = gen_vlan_vid_test(cstate, vlan_num);
+
+ gen_vlan_patch_tpid_test(cstate, b_tpid);
+ gen_or(b0, b_tpid);
+ b0 = b_tpid;
+
+ if (vlan_num >= 0) {
+ gen_vlan_patch_vid_test(cstate, b_vid);
+ gen_and(b0, b_vid);
+ b0 = b_vid;
+ }
return b0;
}
if (cstate->bpf_pcap->bpf_codegen_flags & BPF_SPECIAL_VLAN_HANDLING)
b0 = gen_vlan_bpf_extensions(cstate, vlan_num);
else
- b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num, 0);
+ b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num);
} else
#endif
- b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num, 0);
+ b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num);
break;
case DLT_IEEE802_11:
case DLT_PRISM_HEADER:
case DLT_IEEE802_11_RADIO_AVS:
case DLT_IEEE802_11_RADIO:
- b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num, 0);
+ b0 = gen_vlan_no_bpf_extensions(cstate, vlan_num);
break;
default:
projects / libpcap / blobdiff