#ifndef lint
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.120 2008-03-13 18:13:57 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.121 2008-04-04 19:37:45 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
close(p->send_fd);
}
-pcap_t *
-pcap_open_live(const char *device, int snaplen, int promisc, int to_ms,
- char *ebuf)
+static int
+pcap_activate_dlpi(pcap_t *p)
{
register char *cp;
- register pcap_t *p;
int ppa;
#ifdef HAVE_SOLARIS
int isatm = 0;
char dname2[100];
#endif
- p = (pcap_t *)malloc(sizeof(*p));
- if (p == NULL) {
- strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
- return (NULL);
+ if (p->opt.rfmon) {
+ /*
+ * No monitor mode on any platforms that support DLPI.
+ */
+ return (PCAP_ERROR_RFMON_NOTSUP);
}
- memset(p, 0, sizeof(*p));
+
p->fd = -1; /* indicate that it hasn't been opened yet */
p->send_fd = -1;
/*
** Remove any "/dev/" on the front of the device.
*/
- cp = strrchr(device, '/');
+ cp = strrchr(p->opt.source, '/');
if (cp == NULL)
- strlcpy(dname, device, sizeof(dname));
+ strlcpy(dname, p->opt.source, sizeof(dname));
else
strlcpy(dname, cp + 1, sizeof(dname));
* Split the device name into a device type name and a unit number;
* chop off the unit number, so "dname" is just a device type name.
*/
- cp = split_dname(dname, &ppa, ebuf);
+ cp = split_dname(dname, &ppa, p->errbuf);
if (cp == NULL)
goto bad;
*cp = '\0';
*/
cp = "/dev/dlpi";
if ((p->fd = open(cp, O_RDWR)) < 0) {
- snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"%s: %s", cp, pcap_strerror(errno));
goto bad;
}
* Get a table of all PPAs for that device, and search that
* table for the specified device type name and unit number.
*/
- ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
+ ppa = get_dlpi_ppa(p->fd, dname, ppa, p->errbuf);
if (ppa < 0)
goto bad;
#else
* otherwise, concatenate the device directory name and the
* device name.
*/
- if (*device == '/')
- strlcpy(dname, device, sizeof(dname));
+ if (*p->opt.source == '/')
+ strlcpy(dname, p->opt.source, sizeof(dname));
else
snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX,
- device);
+ p->opt.source);
/*
* Get the unit number, and a pointer to the end of the device
* type name.
*/
- cp = split_dname(dname, &ppa, ebuf);
+ cp = split_dname(dname, &ppa, p->errbuf);
if (cp == NULL)
goto bad;
/* Try device without unit number */
if ((p->fd = open(dname, O_RDWR)) < 0) {
if (errno != ENOENT) {
- snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
pcap_strerror(errno));
goto bad;
}
* for the loopback interface is just a
* symptom of that inability.
*/
- snprintf(ebuf, PCAP_ERRBUF_SIZE,
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"%s: No DLPI device found", device);
} else {
- snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s",
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s",
dname2, pcap_strerror(errno));
}
goto bad;
}
#endif
- p->snapshot = snaplen;
-
/*
** Attach if "style 2" provider
*/
- if (dlinforeq(p->fd, ebuf) < 0 ||
- dlinfoack(p->fd, (char *)buf, ebuf) < 0)
+ if (dlinforeq(p->fd, p->errbuf) < 0 ||
+ dlinfoack(p->fd, (char *)buf, p->errbuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
#ifdef HAVE_SOLARIS
isatm = 1;
#endif
if (infop->dl_provider_style == DL_STYLE2) {
- if (dl_doattach(p->fd, ppa, ebuf) < 0)
+ if (dl_doattach(p->fd, ppa, p->errbuf) < 0)
goto bad;
#ifdef DL_HP_RAWDLS
if (p->send_fd >= 0) {
- if (dl_doattach(p->send_fd, ppa, ebuf) < 0)
+ if (dl_doattach(p->send_fd, ppa, p->errbuf) < 0)
goto bad;
}
#endif
** assume the SAP value in a DLPI bind is an LLC SAP for network
** types that use 802.2 LLC).
*/
- if ((dlbindreq(p->fd, 1537, ebuf) < 0 &&
- dlbindreq(p->fd, 2, ebuf) < 0) ||
- dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
+ if ((dlbindreq(p->fd, 1537, p->errbuf) < 0 &&
+ dlbindreq(p->fd, 2, p->errbuf) < 0) ||
+ dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0)
goto bad;
#elif defined(DL_HP_RAWDLS)
/*
** HP-UX 10.0x and 10.1x.
*/
- if (dl_dohpuxbind(p->fd, ebuf) < 0)
+ if (dl_dohpuxbind(p->fd, p->errbuf) < 0)
goto bad;
if (p->send_fd >= 0) {
/*
** set it to -1, so that you can't send but can
** still receive?
*/
- if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
+ if (dl_dohpuxbind(p->send_fd, p->errbuf) < 0)
goto bad;
}
#else /* neither AIX nor HP-UX */
** Not Sinix, and neither AIX nor HP-UX - Solaris, and any other
** OS using DLPI.
**/
- if (dlbindreq(p->fd, 0, ebuf) < 0 ||
- dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
+ if (dlbindreq(p->fd, 0, p->errbuf) < 0 ||
+ dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0)
goto bad;
#endif /* AIX vs. HP-UX vs. other */
#endif /* !HP-UX 9 and !HP-UX 10.20 or later and !SINIX */
** help, and may break things.
*/
if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) {
- snprintf(ebuf, PCAP_ERRBUF_SIZE, "A_PROMISCON_REQ: %s",
- pcap_strerror(errno));
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+ "A_PROMISCON_REQ: %s", pcap_strerror(errno));
goto bad;
}
} else
#endif
- if (promisc) {
+ if (p->opt.promisc) {
/*
** Enable promiscuous (not necessary on send FD)
*/
- if (dlpromisconreq(p->fd, DL_PROMISC_PHYS, ebuf) < 0 ||
- dlokack(p->fd, "promisc_phys", (char *)buf, ebuf) < 0)
+ if (dlpromisconreq(p->fd, DL_PROMISC_PHYS, p->errbuf) < 0 ||
+ dlokack(p->fd, "promisc_phys", (char *)buf, p->errbuf) < 0)
goto bad;
/*
** HP-UX or SINIX) (Not necessary on send FD)
*/
#if !defined(__hpux) && !defined(sinix)
- if (dlpromisconreq(p->fd, DL_PROMISC_MULTI, ebuf) < 0 ||
- dlokack(p->fd, "promisc_multi", (char *)buf, ebuf) < 0)
+ if (dlpromisconreq(p->fd, DL_PROMISC_MULTI, p->errbuf) < 0 ||
+ dlokack(p->fd, "promisc_multi", (char *)buf, p->errbuf) < 0)
fprintf(stderr,
- "WARNING: DL_PROMISC_MULTI failed (%s)\n", ebuf);
+ "WARNING: DL_PROMISC_MULTI failed (%s)\n",
+ p->errbuf);
#endif
}
/*
#ifndef sinix
if (
#ifdef __hpux
- !promisc &&
+ !p->opt.promisc &&
#endif
#ifdef HAVE_SOLARIS
!isatm &&
#endif
- (dlpromisconreq(p->fd, DL_PROMISC_SAP, ebuf) < 0 ||
- dlokack(p->fd, "promisc_sap", (char *)buf, ebuf) < 0)) {
+ (dlpromisconreq(p->fd, DL_PROMISC_SAP, p->errbuf) < 0 ||
+ dlokack(p->fd, "promisc_sap", (char *)buf, p->errbuf) < 0)) {
/* Not fatal if promisc since the DL_PROMISC_PHYS worked */
- if (promisc)
+ if (p->opt.promisc)
fprintf(stderr,
- "WARNING: DL_PROMISC_SAP failed (%s)\n", ebuf);
+ "WARNING: DL_PROMISC_SAP failed (%s)\n", p->errbuf);
else
goto bad;
}
** promiscuous options.
*/
#if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20_OR_LATER)
- if (dl_dohpuxbind(p->fd, ebuf) < 0)
+ if (dl_dohpuxbind(p->fd, p->errbuf) < 0)
goto bad;
/*
** We don't set promiscuous mode on the send FD, but we'll defer
** set it to -1, so that you can't send but can
** still receive?
*/
- if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
+ if (dl_dohpuxbind(p->send_fd, p->errbuf) < 0)
goto bad;
}
#endif
** XXX - get SAP length and address length as well, for use
** when sending packets.
*/
- if (dlinforeq(p->fd, ebuf) < 0 ||
- dlinfoack(p->fd, (char *)buf, ebuf) < 0)
+ if (dlinforeq(p->fd, p->errbuf) < 0 ||
+ dlinfoack(p->fd, (char *)buf, p->errbuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
- if (pcap_process_mactype(p, infop->dl_mac_type, ebuf) != 0)
+ if (pcap_process_mactype(p, infop->dl_mac_type, p->errbuf) != 0)
goto bad;
#ifdef DLIOCRAW
** header.
*/
if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
- snprintf(ebuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
pcap_strerror(errno));
goto bad;
}
#endif
- ss = snaplen;
+ ss = p->snapshot;
/*
** There is a bug in bufmod(7). When dealing with messages of
#ifdef HAVE_SYS_BUFMOD_H
/* Push and configure bufmod. */
- if (pcap_conf_bufmod(p, ss, to_ms, ebuf) != 0)
+ if (pcap_conf_bufmod(p, ss, p->md.timeout) != 0)
goto bad;
#endif
** As the last operation flush the read side.
*/
if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
- snprintf(ebuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
+ snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
pcap_strerror(errno));
goto bad;
}
/* Allocate data buffer. */
- if (pcap_alloc_databuf(p, ebuf) != 0)
+ if (pcap_alloc_databuf(p) != 0)
goto bad;
/*
p->stats_op = pcap_stats_dlpi;
p->close_op = pcap_close_dlpi;
- return (p);
+ return (0);
bad:
if (p->fd >= 0)
close(p->fd);
if (p->send_fd >= 0)
close(p->send_fd);
- /*
- * Get rid of any link-layer type list we allocated.
- */
- if (p->dlt_list != NULL)
- free(p->dlt_list);
- free(p);
- return (NULL);
+ return (PCAP_ERROR);
}
/*
return (cc);
}
#endif
+
+pcap_t *
+pcap_create(const char *device, char *ebuf)
+{
+ pcap_t *p;
+
+ p = pcap_create_common(device, ebuf);
+ if (p == NULL)
+ return (NULL);
+
+ p->activate_op = pcap_activate_dlpi;
+ return (p);
+}
projects / libpcap / blobdiff