eprintid: 76768 rev_number: 10 eprint_status: archive userid: 16805 dir: disk0/00/07/67/68 datestamp: 2013-03-19 15:03:35 lastmod: 2021-09-23 08:33:17 status_changed: 2013-03-19 15:03:35 type: article metadata_visibility: show creators_name: Alberich-Bayarri, A. creators_name: Moratal, D. creators_name: Escobar Ivirico, J.L. creators_name: Rodríguez Hernández, J.C. creators_name: Vallés-Lluch, A. creators_name: Martí-Bonmatí, L. creators_name: Más Estellés, J. creators_name: Mano, J.F. creators_name: Monleón Pradas, M. creators_name: Gómez Ribelles, J.L. creators_name: Salmerón-Sánchez, M. creators_orcid: 0000-0002-8112-2100 title: Microcomputed tomography and microfinite element modeling for evaluating polymer scaffolds architecture and their mechanical properties ispublished: pub divisions: 30303000 abstract: Detailed knowledge of the porous architecture of synthetic scaffolds for tissue engineering, their mechanical properties, and their interrelationship was obtained in a nondestructive manner. Image analysis of microcomputed tomography (μCT) sections of different scaffolds was done. The three-dimensional (3D) reconstruction of the scaffold allows one to quantify scaffold porosity, including pore size, pore distribution, and struts' thickness. The porous morphology and porosity as calculated from μCT by image analysis agrees with that obtained experimentally by scanning electron microscopy and physically measured porosity, respectively. Furthermore, the mechanical properties of the scaffold were evaluated by making use of finite element modeling (FEM) in which the compression stress–strain test is simulated on the 3D structure reconstructed from the μCT sections. Elastic modulus as calculated from FEM is in agreement with those obtained from the stress–strain experimental test. The method was applied on qualitatively different porous structures (interconnected channels and spheres) with different chemical compositions (that lead to different elastic modulus of the base material) suitable for tissue regeneration. The elastic properties of the constructs are explained on the basis of the FEM model that supports the main mechanical conclusion of the experimental results: the elastic modulus does not depend on the geometric characteristics of the pore (pore size, interconnection throat size) but only on the total porosity of the scaffold. date: 2009-10 date_type: published id_number: 10.1002/jbm.b.31389 uniqueid: glaseprints:2009-76768 published_online: 2009-05-07 issn_online: 1552-4981 scopus_impact: 5 scopus_cluster: 2-s2.0-70049116400 scopus_datestamp: 2013-10-26 09:27:27 wos_impact: 4 wos_cluster: WOS:000269897100022 wos_datestamp: 2013-05-21 22:54:35 full_text_status: none publication: Journal of Biomedical Materials Research Part B: Applied Biomaterials volume: 91B number: 1 pagerange: 191-202 refereed: TRUE issn: 1552-4973 hoa_compliant: 305 hoa_date_pub: 2009-05-07 hoa_exclude: FALSE hoa_gold: FALSE citation: Alberich-Bayarri, A. et al. (2009) Microcomputed tomography and microfinite element modeling for evaluating polymer scaffolds architecture and their mechanical properties. Journal of Biomedical Materials Research Part B: Applied Biomaterials , 91B(1), pp. 191-202. (doi: 10.1002/jbm.b.31389 )