DellR720通过U盘安装windows2008R2

============================ R E A D M E N O T E S ============================ Broadcom BACS command line interface utility for Windows Copyright (c) 2000-2011 Broadcom Corporation All rights reserved. June 17, 2011 Table of Contents ================= 1. Introduction 2. Requirements 3. Scope 4. Limitation 5. Installation 6. Command Usage 7. HowTo and Examples 8. Exit Codes 9. Third Party Software License 1. Introduction: ================ This utility is a console application. Users could run it from a Windows command prompt. The application will use the console and can be run both in the command line interface (CLI) mode as well as interactive mode. In the non-interactive (CLI) mode, the utility can take a command as an input argument and run the command producing appropriate effect/output and return meaningful exit codes. This module requires the appropriate BMAPI module and device driver in order to work correctly. This utility can also be used to manage NetXtreme I and NetXtreme II devices on both local as well as remote computer systems. 2. Requirements: ================ 1. CIM provider is installed properly on the system that is to be managed by this utility. 2. appropriate device driver for the NIC is installed on the system that is to be managed by this utility. 3. Scope: ========= Supported Operating Systems - Windows 2000 - Windows XP - Windows Vista - Windows Server 2003 - Windows Server 2008 - Windows 7 4. Limitation: ============== 1. All WindowsPE systems are not supported. 5. Installation: ================ 1. On the system with NetXtreme I and NetXtreme II of NICs, install the appropriate driver package using the driver installer. 2. On the system with NetXtreme I and NetXtreme II of NICs, install the CIM provider and its dependent components. 3. BACScli and all the required files can be installed automatically by the BACS installer. 6. Command Usage: ================= Usage: 6.1 POSIX-compliant commands: BACScli [-t <target type>] [-f <target ID format>] [-i <target ID>] [-r <IP address>] [-n <port>] [-a digest | basic] [-u <username>] [-p <password>] <command string> - The -t option is used to select the type of the target, it must be followed by the <target type> that can be VBD, NDIS, iSCSI, iSCSI Portal, iSCSI Target, TEAM, VNIC, FCOE, FCoE Target, PhyAdapters, PhyPorts, HOST or system. - The -f option is used to select the format of the <target ID> used in the -i option. The <target ID format> can be MAC, BDF, or NAME. The MAC and BDF are used to select a device of a <target type>. The NAME is used to select either a Team or a Virtual adapter. - The -i option is used to select the target identified by the <target ID>. The <target ID> can be the Ethernet MAC address (using the NDIS device�s MAC address for Ethernet and using the iSCSI device�s MAC address for iSCSI Hardware Offload and using the teaming MAC address for VDB), the PCI Bus/Device/Function number, or the name of a Team/Virtual adapter. - The -r option is used to specify an IP address of a host to be accessed. - The -n option is used to select a port on a host to be accessed. - The -a option is used to select either digest or basic authentication mode. The default authentication mode is basic. - The -u option is used to specify a user name. - The -p option is used to specify password. - The <command string> includes the command, its options, parameters, and values for the command. <command string> have to be specified within the double quotes, but if the <command string> contains only one command without any option or command argument, the double quotes is optional. - If any name or parameter contains special character such as '^', '&' and so on, it needs to be specified in double quotes, "^" for example. Following is the list of available commands: add : add team configuration from a file adddiscoveryportal : add a discovery portal to the host addhost : add a remote host for management addisnsserver : add the IP address or DNS name of an iSNS server to the list of iSNS servers addtarget : manually configure a target and optionally persist that target bootcfg : use this command to do MBA/FCoE/iSCSI boot configuration cablediag : run cable diagnostic tests on the selected PhyPort device cfg : configure parameter of the selected device createnpivport : create an NPIV port diag : configure and conduct a diagnostic test discoverhost : search and add remote hosts from a range of IP addresses fallback : fallback to primary adapters from standby help : list available commands info : display adapter information of the selected NIC list : list target items in different views listisnsservers : display the list of iSNS server addresses that are persisted by the iSCSI Initiator service. listdiscoveryportals : display the list of persisted target portals log : log all input and output into a file login : log in to an iscsi target logout : log out of an iscsi target networkdiag : run network diagnostic test on the selected NDIS device q : exit the program refresh : scan the system for hardware/configuration changes refreshall : scan all systems for hardware/configuration changes refreshdiscoveryportal : perform a SendTargets operation to the target portal refreshisnsserver : refresh the list of targets discovered from the specified iSNS server remove : remove a team removediscoveryportal : remove discovery portal from the host removeallhosts : remove all hosts from the host management list removehost : remove a host from the host management list removeisnsserver : remove the IP address or DNS name of the iSNS server from the persisted list of iSNS servers removenpivport : remove an NPIV port removepersistenttarget : remove a target from the list of persistent targets removetarget : remove a target from the list of persisted targets resetsessionstats : display session statistics for all or the selected session resetstats : Reset the statistics restore : restore team configuration from a file save : save team configuration to a file select : select an adapter or List available adapters sessions : display list of iSCSI sessions on the selected iSCSI adapter. sessionstats : display session statistics for all or the selected session showsel : show the selected target item stats : display statistic information of the selected NIC unassigned : display adapters that are not yet part of a team version : display the version of this program 6.1.1 Applicable commands for each item view: All: addhost discoverhost help list