记一次GBase 8s 安装部署数据库初始化故障问题分析及处理记录

一、前言

最近南大通用第十期GBase 8s 免费培训开始了,因为今年以来一直在进行去O的调研,看GBase 官网介绍 GBase 8s V8.8兼容Oracle,GBase 8s是在informix源码基础上改造的产品,学习GBase 8s刚好可以了解informix和测试迁移到Oracle。于是报名参加了本次的培训。

学习GBase 8s,首先要学会安装数据库软件,有一套属于自己的测试环境。我本次选择一台安装了Centos 7.9操作系统的64G内存的服务器。

但在安装时却遇到了一些所谓的异常情况,接下来我会介绍正常安装和遇到的一些问题。

二、安装部署

2.1 安装准备

按照GBase 官方文档,在按照GBase 8s前需创建一个gbasedbt用户,并按照要求安装了相应依赖包。从官网下载GBase8sV8.8_TL_3.5.0_arm.7z安装包并解压,前期准备工作本部分略,详细可参照官网文档 【https://cdn.gbase.cn//products/27/2n18SB0xuOY4JPwjr0WQa-GBase%208s%20V8.8%20%E5%AE%89%E8%A3%85%E6%89%8B%E5%86%8C.pdf (GBase 8s V8.8 安装手册.pdf)】

2.2 安装部署

本次选择定制安装模式,使用root用户,执行GBase 8s软件解压后的ids_install。

[root@host19c-node1 install]# sh ids_install 
-- 一路回车
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...

Launching installer...

===============================================================================
GBase Software Bundle                            (created with InstallAnywhere)
-------------------------------------------------------------------------------

Preparing CONSOLE Mode Installation...




===============================================================================
Getting Started
---------------

This application  will guide you through the installation of GBase Software 
Bundle.
Copyright General Data Corporation 2014, 2023. All rights reserved.

1. Release Notes
The Release Notes can be found in 
/root/setup/install/doc/ids_unix_relnotes_12.10.html.
2. Launch Information Center
Access the GBase Information Center at http://www.gbase.cn.
To Begin Installation, respond to each prompt to proceed to the next step in 
the installation.
If you want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.


PRESS <ENTER> TO CONTINUE: 



===============================================================================
License Agreement
-----------------

Installation and Use of GBase Software Bundle Requires Acceptance of the 
Following License Agreement:

Thank you for choosing GBase product!



Please read carefully the following licencing agreement before installing any 
product: TIANJIN GENERAL DATA TECHNOLOGY CO. LTD. LICENSE AGREEMENT



READ THE TERMS OF THIS AGREEMENT AND ANY PROVIDED SUPPLEMENTAL LICENSETERMS  
(COLLECTIVELY "AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWAREMEDIA PACKAGE. 
BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO THE TERMS OF THIS 
AGREEMENT.  IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE YOUR 
ACCEPTANCE OF THESE  TERMS. IF YOU DO NOT AGREE TO ALL THESE TERMS, PROMPTLY 
RETURN THE UNUSED  SOFTWARE TO YOUR PLACE OF PURCHASE FOR A REFUND.

1. LICENSE TO USE. GeneralData grants you a non-exclusive and non-transferable 
license for  the internal use only of the accompanying software and 
documentation and any error corrections  provided by GeneralData(collectively 
"Software"), by the number of users and the class of  computer hardware for 
which the corresponding fee has been paid.

2. RESTRICTIONS. Software is confidential and copyrighted. Title to Software 

PRESS <ENTER> TO CONTINUE: 

and all  associated intellectual property rights is retained by GeneralData 
and/or its licensors. Except as  specifically authorized in any Supplemental 
License Terms, you may not make copies of Software,  other than a single copy 
of Software for archival purposes. Unless enforcement is prohibited by  
applicable law, you may not modify, decompile, or reverse engineer Software. 
You acknowledge  that Software is not designed, licensed or intended for use in
the design, construction, operation  or maintenance of any nuclear facility. 
GeneralData disclaims any express or implied warranty  of fitness for such 
uses. No right, title or interest in or to any trademark, service mark, logo or
trade name of GeneralData or its licensors is granted under this Agreement.

3. DISCLAIMER OF WARRANTY. Unless specified in this agreement, all express of 
implied  conditions, representations and warranties, including any implied 
warranty of merchantability,  fitness for aparticular purpose or 
non-infringement are disclaimed, except to theextent that  these disclaimers 
are held to be legally invalid.

4. LIMITATION OF LIABILITY. To the extent not prohibited by law, in no event 
will GeneralData  or its licensors be liable for any lost revenue, profit or 
data, or for special, indirect,  consequential, incidental orpunitive damages, 
however caused regardless of the theory of liability,  arising out of or 
related to the use of or inability to use software, even if GeneralData has 

PRESS <ENTER> TO CONTINUE: 

been  advised of the possibility of such damages. In no event will 
GeneralData's libility to you, whether  incontract, tort(including negligence),
or otherwise, exceed the amount paid by you for Software  under this Agreement.
The foregoing limitations will apply even if the above stated warranty  fails 
of itsessential purpose.

5. TERMINATION. This Agreement is effective until terminated. You may terminate
this  Agreement at any time by destroying all copies of Software. This 
Agreement will terminate  immediately without noticefrom GeneralData if you 
fail to comply with any provision of this  Agreement. Upon Termination, you 
must destroy all copies of Software.



6. EXPORT REGULATIONS. All Software and technical data delivered under this 
Agreement are  subject to US export control laws and may be subject to export 
or import regulations in other  countries. You agree to comply strictly with 
all such laws and regulations and acknowledge that  you have the responsibility
to obtain such licenses to export, re-export, or import as may be  required 
after delivery to you.

7. CHINESE GOVERNMENT RESTRICTED. If Software is being acquired by or on behalf

PRESS <ENTER> TO CONTINUE: 

of the  Chinese Government, then the Government's rights in Software and 
accompanying documentation  will be only as set forth in this Agreement.

8. GOVERNING LAW. Any action related to this Agreement will be governed by 
Chinese law:  "COPYRIGHT LAW OF THE PEOPLE'S REPUBLIC OF CHINA", "PATENT LAW OF
THE PEOPLE'S  REPUBLIC OF CHINA", "TRADEMARK LAW OF THE PEOPLE'S REPUBLIC OF 
CHINA", "COMPUTER  SOFTWARE PROTECTION REGULATIONS OF THE PEOPLE'S REPUBLIC OF 
CHINA". No choice of  law rules of any jurisdiction will apply."

9. SEVERABILITY. If any provision of this Agreement is held to be 
unenforceable, this  Agreement will remain in effect with the provision 
omitted, unless omission would frustrate the  intent of the parties, in which 
case this Agreement will immediately terminate.

10. INTEGRATION. This Agreement is the entire agreement between you and 
GeneralData  relating to its subject matter. It supersedes all prior or 
contemporaneous oral or written  communications, proposals, representations and
warranties and prevails over any conflicting or  additional terms of any quote,
order, acknowledgment, or other communication between the  parties relating to 
its subject matter during the term of this Agreement. No modification of this  
Agreement will be binding, unless in writing and signed by an authorize 
depresentative of each  party. When the translation document has the different 

PRESS <ENTER> TO CONTINUE: 

meaning or has the conflicting views with  Chinese original text conflict, 
should take the laws and regulations promulgation unit as well as  the 
G
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

尚雷_TechTalk01

感谢您的鼓励,我会再接再厉。

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值