vlc 批量转化格式

vlc是一款非常优秀的播放器，同时还可以进行转码，推流，把任意一种视频文件流化成ts文件等功能

一、 编译安装VLC 使用vlc-1.0.5.tar.bz2 +　live555-2010.01.tar.gz export MYDIR=/root/lf 将live555-2010.01.tar.gz和vlc-1.0.5.tar.bz2放置在$MYDIR下 cd $MYDIR (一) 编译liveMedia tar xvfz live555-2010.01.tar.gz cd live ./genMakefiles linux make (二) 安装libdvbpsi rpm -hiv libdvbpsi-0.1.7-1.el4.rf.i386.rpm rpm -hiv libdvbpsi-devel-0.1.7-1.el4.rf.i386.rpm 需要什么rpm可到http://apt.sw.be/redhat/el4/en/i386/rpmforge/RPMS/中下载 (三) 编译VLC 1. configure ./configure --prefix=/usr --enable-debug --disable-avcodec --disable-hal --disable-avformat --disable-swscale --disable-a52 --disable-x11 --disable-sdl --disable-fribidi --disable-dbus --disable-libgcrypt --disable-gnutls --disable-remoteosd --disable-skins2 --disable-qt4 --disable-libxml2 --disable-lua --disable-xcb --disable-alsa --disable-v4l2 --disable-qt --enable-run-as-root --enable-live555 --with-live555-tree=$MYDIR/live --disable-mad --disable-postproc --enable-dvbpsi --enable-x264 2. make 3. 出现错误error: syntax error before "vlc_spinlock_t"： ../include/vlc_threads.h:240: error: syntax error before "vlc_spinlock_t" …… make[4]: *** [control/libvlc_la-vlm.lo] Error 1 make[4]: Leaving directory `/root/lf/vlc-1.0.5/src' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/root/lf/vlc-1.0.5/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/root/lf/vlc-1.0.5/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/lf/vlc-1.0.5' make: *** [all] Error 2 通过以下命令解决： sed -e 's/define\s*_POSIX_SPIN_LOCKS\s*/define _POSIX_SPIN_LOCKS -1 \/\/ wrong: /g' -i /usr/include/bits/posix_opt.h 4. 重试make出现error: `AFS_SUPER_MAGIC' undeclared： file.c:52:28: linux/magic.h: No such file or directory file.c: In function `IsRemote': file.c:141: error: `AFS_SUPER_MAGIC' undeclared (first use in this function) file.c:141: error: (Each undeclared identifier is reported only once file.c:141: error: for each function it appears in.) file.c:142: error: `CODA_SUPER_MAGIC' undeclared (first use in this function) file.c:143: error: `NCP_SUPER_MAGIC' undeclared (first use in this function) file.c:144: error: `NFS_SUPER_MAGIC' undeclared (first use in this function) file.c:145: error: `SMB_SUPER_MAGIC' undeclared (first use in this function) make[5]: *** [libaccess_file_plugin_la-file.lo] Error 1 make[5]: Leaving directory `/root/lf/vlc-1.0.5/modules/access' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/root/lf/vlc-1.0.5/modules/access' make[3]: *** [all] Error 2 make[3]: Leaving directory `/root/lf/vlc-1.0.5/modules/access' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/lf/vlc-1.0.5/modules' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/lf/vlc-1.0.5' make: *** [all] Error 2 将下面的magic.h文件复制到/usr/include/linux/目录下 5. make install 6. 检查 vlc -l | grep access_output access_output_udp UDP stream output access_output_http HTTP stream output access_output_file File stream output access_output_dummy Dummy stream output access_output_rtmp RTMP stream output vlc -l | grep dvbpsi mux_ts TS muxer (libdvbpsi) (四) 进行RTSP To TS转码：  不经视音频重编码的直接转码： vlc rtsp://172.17.0.219:8554/1 --sout '#standard{access=http, mux=ts, dst=172.17.0.100:1234}' 注：黑体部分为本机ＩＰ和端口，不能是127.0.0.1 vlc rtsp://172.17.0.219:8554/1 --sout '#duplicate{dst="std{access=udp, mux=ts, dst=172.17.1.116:1234}"}' vlc rtsp://172.17.0.219:8554/1 --sout '#duplicate{dst="std{access=http, mux=ts, dst=172.17.0.100:1234}"}' 二、 视音频重编码的VLC编译安装 (一) 需要编译安装ffmpeg ./configure --prefix=/usr --enable-libfaac --enable-libx264 --enable-pthreads --disable-ffserver --disable-ffplay --enable-gpl --enable-nonfree [root@localhost ffmpeg-0.6.7]# make common.mak:28: *** unterminated call to function `foreach': missing `)'. Stop. 出现上面错误需要更新Make版本，使用make-3.81.tar.gz ./configure --prefix=/usr;make;make install In file included from libavdevice/v4l.c:33: /usr/include/linux/videodev.h:56: error: syntax error before "ulong" /usr/include/linux/videodev.h:72: error: syntax error before '}' token 编辑/usr/include/linux/videodev.h第56行，把ulong改为 unsigned long (二) 编译VLC ./configure --prefix=/usr --enable-debug --enable-avcodec --disable-hal --disable-avformat --disable-swscale --disable-a52 --disable-x11 --disable-sdl --disable-fribidi --disable-dbus --disable-libgcrypt --disable-gnutls --disable-remoteosd --disable-skins2 --disable-qt4 --disable-libxml2 --disable-lua --disable-xcb --disable-alsa --disable-v4l2 --disable-qt --enable-run-as-root --enable-live555 --with-live555-tree=$MYDIR/live --disable-mad --disable-postproc --enable-dvbpsi --enable-x264 没有--enable-avcodec运行VLC转码会出现"cannot find video decoder"的错误。 (三) 进行RTSP To TS转码： vlc tcp://172.17.0.199:7799 --sout '#duplicate{dst="transcode{venc=x264{profile=baseline},vcodec=h264,acodec=mpga,vb=644,ab=56}:std{access=udp,mux=ts,dst=172.17.0.219:1234}"}' 使用VLC转时，不要激活转码 可正常工作的选项： :sout=#http{mux=ts,dst=:8080/1} :sout-keep :sout=#udp{mux=ts,dst=172.17.1.116:1234} :sout-keep http://www.videolan.org/doc/videolan-howto/en/ch09.html ffmpeg -i "rtsp://172.17.0.219:8554/1" -acodec libfaac -vcodec libx264 -vpre default -f mpegts -async 1 udp://127.0.0.1:3344 ./configure --prefix=/usr --enable-libfaac --enable-libx264 --enable-pthreads --disable-ffserver --disable-ffplay --enable-gpl --enable-nonfree 转码 ffmpeg -i "rtsp://172.17.0.219:8080/1" -acodec libfaac -vcodec libx264 -vpre default -f mpegts -async 1 udp://172.17.0.219:3344

m3u8流视频转换 可下载各大门户网站视频 各种格式转换 操作说明： 1.安装成功后，打开File->Open Network，粘贴m3u8网址url 2.勾选Stream output复选框 3.点击下方的Settings，勾选Dispaly the stream locally，选择File（视频导出的路径和名称），勾选Video，选择Video格式为mp4v（可根据自己需求选择），Bitrate为128（可根据自己需求选择），Scale为1（可根据自己需求选择）。 4.所有设置完毕后，选择OK，静静地等待导出就好了（这里会播放视频，请不要暂停，此时播放即时导出）。