Cisco ASR1000 show interface transceiver查看接口收发光

funnycoffee123

于 2025-02-10 16:41:08 发布

阅读量344

点赞数 3

CC 4.0 BY-SA版权

文章标签： asr1000

本文链接：https://blog.csdn.net/funnycoffee123/article/details/145553283

Cisco ASR1000 show interface transceiver查看接口收发光

Cisco ASR1000查看收发光的命令与其他平台不一样
其他网络设备命令如下：（包括Catalyst 和Nexus）

show interface G1/1/1 transceiver detail

示例：

Cisco-3750#show interface g 1/1/1 tran detail 
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.

                              High Alarm  High Warn  Low Warn   Low Alarm
          Temperature         Threshold   Threshold  Threshold  Threshold
Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)
--------- ------------------  ----------  ---------  ---------  ---------
Gi1/1/1     33.1                90.0        85.0        -5.0      -10.0

                              High Alarm  High Warn  Low Warn   Low Alarm
           Voltage            Threshold   Threshold  Threshold  Threshold
Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)
---------  ---------------    ----------  ---------  ---------  ---------
Gi1/1/1    3.28                  3.60        3.50        3.10       3.00

           Optical            High Alarm  High Warn  Low Warn   Low Alarm
           Transmit Power     Threshold   Threshold  Threshold  Threshold
Port       (dBm)              (dBm)       (dBm)      (dBm)