esp32 上传数据到中国移动OneNet

要将ESP8266发送数据到OneNet，您需要完成以下步骤： 1. 注册OneNet账户并创建设备和数据流。 2. 在ESP8266上安装并配置MQTT客户端库，例如PubSubClient。 3. 编写ESP8266的代码，以连接到OneNet的MQTT服务器并发布数据到数据流。 以下是一个简单的示例代码，可以将ESP8266的温度和湿度数据发布到OneNet的数据流中： ``` #include <ESP8266WiFi.h> #include <PubSubClient.h> const char* ssid = "your_SSID"; const char* password = "your_PASSWORD"; const char* mqtt_server = "mqtt.heclouds.com"; const char* mqtt_user = "your_MQTT_USER"; const char* mqtt_password = "your_MQTT_PASSWORD"; const char* topic = "your_TOPIC"; WiFiClient espClient; PubSubClient client(espClient); void setup() { Serial.begin(115200); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); Serial.println("Connecting to WiFi..."); } Serial.println("Connected to WiFi"); client.setServer(mqtt_server, 1883); client.setCallback(callback); while (!client.connected()) { if (client.connect("ESP8266", mqtt_user, mqtt_password)) { Serial.println("Connected to MQTT server"); } else { Serial.print("Failed to connect to MQTT server, rc="); Serial.print(client.state()); Serial.println(" retrying in 5 seconds"); delay(5000); } } } void loop() { float temperature = 25.0; // replace with your temperature reading float humidity = 50.0; // replace with your humidity reading char payload[50]; snprintf(payload, sizeof(payload), "{\"temperature\":%.2f,\"humidity\":%.2f}", temperature, humidity); client.publish(topic, payload); Serial.println("Data published to OneNet"); delay(5000); } void callback(char* topic, byte* payload, unsigned int length) { // handle incoming messages if needed } ``` 请注意，您需要将代码中的“your_SSID”、“your_PASSWORD”、“your_MQTT_USER”、“your_MQTT_PASSWORD”和“your_TOPIC”替换为您的OneNet账户和设备的信息。此外，您还需要将“temperature”和“humidity”替换为您要发布的数据流的名称。 希望这可以帮助您将ESP8266连接到OneNet并发送数据。