Wake CFD Validation Reports
This collection presents selected verification and validation cases for Wake CFD. It shows what was computed, what each result was compared against, and where the comparison supports use of the solver. Each report records the solver build, simulation setup, reference data, numerical results, and limits of the finding.
Purpose and Coverage
The cases cover analytical solutions, published computations, and experimental measurements. They exercise selected flow regimes, physical models, boundary conditions, and numerical methods. This is a collection of documented comparisons, not an exhaustive qualification of every Wake CFD capability or combination of settings.
The primary published engineering track is density-based Navier–Stokes (DBNS), especially external aerodynamics. Pressure-based Navier–Stokes (PBNS) and Flux Reconstruction (FR) are in development. Their reports establish findings for the conditions tested in those reports; they do not establish production readiness across either solver path.
Using the Reports
Begin with the Objective and Reference Solution and Data to see which question the case answers. Then check the Run Provenance and Artifacts, Simulation Conditions, Mesh, Boundary and Initial Conditions, and Numerical Methods before interpreting the plots and error measures. The Conclusions and Applicable Scope state which conditions the result supports and which questions remain open.
These reports document evidence and settings rather than provide step-by-step instructions for running a solver. Use the Wake CFD User Guide for setup and input instructions. Input decks and result files will be linked from individual reports when they become available; an unavailable artifact is identified in the report.
Interpreting the Results
Verification compares a computation with an analytical solution, a published numerical result, or a convergence expectation. Validation compares a prediction with experimental data or an experiment-based correlation. The case directory separates reports by this distinction and groups them by solver.
Agreement should be read together with the mesh, convergence history, reference uncertainty, and reported error metric. A result at one geometry, operating point, or model setting does not establish accuracy at other conditions. There is no single acceptance threshold for the collection; each report explains the comparison and its limits.
The documentation baseline is Wake CFD 0.23.0. Individual reports may use different builds; the version in each report’s Run Provenance and Artifacts identifies the build that produced its figures and numbers.
Find a Case
For external aerodynamics, start with the SA flat-plate grid study, the RAE2822 transonic airfoil, the NACA0012 SA polar, the ONERA M6 wing, and the CRM DPW-5 SA mesh study. The HiLiftPW-1 Trap Wing adds a high-lift comparison; its report states where the computed stall remains unresolved.
The full directory also covers shocks and expansion fans, unsteady cylinder shedding, shear flows and jets, conjugate heat transfer, corner secondary flow, and static/Magnus coefficients. Each case describes what its comparison establishes and what remains outside its tested range.