NSS COMPETENCE
TRANSFER
SESSION 5
PIERRO CAMACHO [Link]@[Link]
TASKS
Configure Announcements in MSS MGW
Create / Delete A interface
Create / Delete PSTN connection
Create / Modify / Delete / Interrogate origin
analysis
Create / Modify / Delete / Interrogate area
service numbers
ANNOUNCEMENTS IN MGW/MSS
In the MSC Server concept, the announcements are delivered by the
MGW and the MSC Server controls the announcements via the H.248
Megaco protocol.
Announcement speech format is 64 kbit/s coded with the A-law/μ-law
codec.
Announcements are generated from MGW Rel.4 in the format they are
needed for the subscriber (for example, AMR-coded).
Announcement sample files are stored in VANU.
Annoucement source files (*.VAT, *.VAD, *.VAL) are stored in the OMU
WDU.
The TCU is used for inserting an announcement from a given termination
point to the user
connection.
The speech recordings are transcoded with a suitable codec when
needed.
DSP
MSC Server's call control requests announcements in different call phases.
MSS requests announcement connections from MGW using the H.248
protocol (MEGACO).
The MGW Rel.4 announcement service selects VANU, connects
announcements internally to the user plane termination (TDM, ATM, IP)
and replies. MGW Rel.4 ends the announcement with a MEGACO request
received from MSC Server.
MML COMMANDS
IN MGW
ZJAI INTERROGATE ANNOUNCEMENT DATA
ZJAT TRANSFER ANNOUNCEMENT FILE
ZJAY LOAD ANNOUNCEMENT FILE
MML COMMANDS
IN MSS
ZRAA Create general announcement parameter
ZRAC Create Announcement
ZRAM Activate the annoucement
ZRDC Create announcement analysis in TREE 48
ANN IDENTIFIER Announcement case
Ann. case
XYZZZ nbr.
0 direct call to announcement
X= LANGUAGE ID
3 intermediate announcement
Y ANN CASE
ZZZ= ANN SPECIFIER 9 intelligent network
announcement
E text announcement
CREATION OF A INTERFACE
IN MSS
ZNRC: Create Signalling Routeset
ZNVA: Allow Activation of Signalling Routeset
ZNVC: Change Signalling Routeset State
ZNFD: Define SCCP Data at MSS
ZNGC: Change SCCP state of the Signalling Routeset
ZNHC: Change SCCP Subsystem state of the Signalling Routeset
ZRCC: Create CGR for the A Interface
ZRCA: Add circuits to the CGR
ZRRC: Creation of Route for CGR
ZCRM: Change External CGR state
ZCEC: Change Circuit state of the CGR
CREATION OF A INTERFACE
IN MGW
ZNCN: Create Signalling Link
ZNSC: Create Signalling Linkset
ZNRC: Create Signalling Routeset
ZNVA: Allow Signalling Routeset state Activation
ZRCC: Create CGR for the A Interface
ZCIM: Change CGR state
ZRCA: Add circuits to CGR
ZCIM: Change Circuit state
ZJVI: Check the Virtual Media Gateway you will add the created CGR
ZJVM: Modify VMGW data handling the A Interface to add the created
CGR
ZNLA: Allow Activation of Signalling Link
ZNLC: Change state of Signalling Link
ZNVC: Change state of Routeset
CREATION OF PSTN CONNECTION
R4 MGW R4 MSS
ZRCC Create Circuit Group
ZNCN: Create Signalling Link
ZNSC: Create Signaling Link Set ZRCA Add circuits to CGR
ZNRC: Create Route Set
ZCRM Change CGR state
ZNRB: Create Cluster (APC) to Route Set:
ZRCC: Create Circuit Group ZCEC Change circuits state
ZRCA: Add circuits to CGR
ZNLA: Allow activation of SL ZRRC Create route
ZNLC: Change SL state ZRNC Create number
ZNVA: Allow activation of Route Set modification
ZNVC: Change Route Set state
ZCIM: Change CGR state ZRDE Create sub destination
ZCIM: Change circuits state ZRDE Create destination
ZRDC Create digit analysis
DELETING PSTN CONNECTION
R4 MGW R4 MSS
ZCIM: Change circuits state ZRDD Delete digit analysis
ZCIM: Change CGR state ZRDD Delete destination
ZNVC: Change Route Set state ZRDD Delete sub destination
ZNVD: Deny activation of Route Set ZRND Delete number
ZNLC: Change SL state modification
ZNLD: Deny activation of SL ZRRD Delete route
ZRCR: Remove circuits from CGR ZCEC Change circuits state
ZRCC: Delete Circuit Group ZCRM Change CGR state
ZNRD: Delete Route Set ZRCR Remove circuits from CGR
ZNSD: Delete Signaling Link Set ZRCC Delete Circuit Group
ZNCD: Delete Signalling Link
ORIGIN ANALYSIS
The origin analysis is made to
mobile-originated calls to find the
call's charging origin.
The call phases in which the
analysis is made come before the
routing and charging analysis
MS Category in DX200 MSC internal form:
ordinary Four cell-dependent tariff classes are used:
Coin Box (payphone)
Priority 00 Tariff 0
Test 01 Tariff 1
02 Tariff 2
MS Power capability in binary format: 03 Tariff 3
000 class 1. vehicle and portable
001 class 2. portable Charging Origin (CORG)
010 class 3. hand-held
011 class 4. hand-held 0...254
100 class 5. hand-held
ORIGIN ANALYSIS
calling party category (obtained from the VLR )
cell tariff (stored to the Cell Data File (CDAFIL)).
The cell tariff is used if the originating cell location affects the charging
of the mobile station (MS).
mobile station power capability (obtained from the MS)
class = MS power capability
ct = cell tariff
cpc = calling party category
corg = charging origin
MML COMMANDS
IN MSS
ZRVI Interrogate Origin Analysis
ZRVC Create the Origin Analysis
ZRVM Modification of Origin Analysis - only the charging
origin can be modified
ZRVD Deletion of Origin Analysis
AREA SERVICE NUMBERS
AREA SERVICE NUMBER – actual call number for the service
area access point. The call will be routed to the area service
number of the nearest location offering the service.
MML COMMANDS
ZRUI Interrogate Area Service Number
ZRUA Create Area Service Number
ZRUM . Modification of Area Service Number only the analysis
tree and type of number can be modified
ZRUD Deletion of Area Service Number
