Section 2 Assignment Answer Key
Description
This assignment re-enforces learning from the video lesson in this section. This assignment involves la-
belling a block diagram with the provided information into the appropriate information field.
Instructions
1) View the video lesson “Introduction to VFDs, the Block Diagram and Basics Overview”.
2) On the following page, fill in the blank field for each section and subsection of the VFD block
diagram with the information provided below (11 fields).
3) On the following page, place the correct electronic power component name in the box
located in each section (4 fields).
4) You can type or select the text from the list and copy and paste it into the correspond-
ing field.
5) Check your work with the answer key provided with the assignment.
Drawing Labels
A. Power Section
B. Control Section
C. AC Input 50Hz or 60Hz Three Phase or Single Phase
D. Converter Section
E. DC Link or Bus Section
F. Inverter Section
G. Induction Motor
H. Programming Keypad and Local Control Buttons
I. Digital & analog signals input and output to field devices
J. Comms Port
K. Brake / Regeneration Resistor
Graphical Electronic Component
1. Current Filter
2. Rectifier Diodes
3. Transistors & Regen Diodes
4. Voltage Filter
Variable Frequency Drive Power & Control Theory Overview
Page 1 of 2
Brake / Regeneration
Resistor
Power Section
Converter Section DC Link or Bus Inverter Section
Section
Induction
Current Filter Motor
AC Input 50Hz or Rectifier Diodes
60Hz Three Phase Transistors & Regen Diodes
Voltage Filter
or Single Phase
Programming
Digital & analog signals Comms
Control Section Keypad and input and output to field
Local Control Port
Buttons devices
Variable Frequency Drive Power & Control Theory Overview
Page 2 of 2
