DATA SHEET

Extreme Networks 800-Series

Cost-effective fully-featured enterprise-class 10/100 and 10/100/1000 switch family

BENEFITS
Business Alignment
• Cost-effective and reliable
edge connectivity

Operational Efficiency
• Consolidated management
capabilities

• Fully featured CLI,web-

based, TACACS+ or NetSight
management enabling ease of
management thereby lowering
• Fully featured 10/100 and 10/100/1000 edge connectivity solution
Total Cost of Ownership (TCO)
• Line rate L2 switching
Security
• IEEE 802.3at high power PoE options
• Network accesssecured by 802.1x,
MAC address and web- based • Optional redundant power for all models
authentication methods
• Extreme Networks award-winning Lifetime Warranty support
Support and Service
• Industry leading customer Product Overview
satisfaction and first call The Extreme Networks 800-Series is a highly reliable Fast Ethernet and Gigabit
resolution rates.
Ethernet family of edge switches that provides scalable, wire-rate performance in
• Comprehensive lifetime warranty support of the bandwidth-intensive and delay-sensitive requirements of today’s
demanding applications.

The 800-Series is comprised of ten models (four 10/100 switches and six
10/100/1000 switches):

• 24 port 10/100 with four SFP uplinks and two 10/100/1000 ports

• 24 port 10/100 PoE with four SFP uplinks and two 10/100/1000 ports

• 48 port 10/100 with four SFP uplinks and two 10/100/1000 ports

• 48 port 10/100 PoE with four SFP uplinks and two 10/100/1000 ports

• 8 port 10/100/1000 with two SFP uplinks

• 8 port 10/100/1000 PoE with two SFP uplinks

• 24 port 10/100/1000 with four SFP uplinks

• 24 port 10/100/1000 PoE with four SFP uplinks

• 48 port 10/100/1000 with four SFP uplinks

• 48 port 10/100/1000 PoE with four SFP uplinks

Up to eight switches can be interconnected to form a single managed entity

thereby creating a virtual switch that can be managed with a single IP address to
help minimize management requirements. An integral power supply is the primary

800 Series – Data Sheet 1

source of power for all 800-Series switches and complete power IEEE 802.3at High Power PoE
redundancy is provided by optional external power supplies.
Up to 30W per port
All PoE switches support IEEE 802.3at which allows up to 30
IEEE 802.3az Energy Efficient Ethernet
watts of PoE power to be provided to a single port. Dynamic
power allocation is supported which allows unused allocated PoE 08G models only
power to be returned to the central pool for use on other ports. IEEE 802.3i – 10Base – T
Up to 375 watts of PoE power are available on the 24 port and IEEE 802.3u – 100Base – T, 100Base - FX
48 port PoE models. IEEE 802.3z – GE over Fiber
End users can be authorized via IEEE 802.1X, MAC address or Full/half duplex auto – sense support on all ports (Auto – MDIX)
web-based authentication. Class of service, bandwidth control and ERPS – Ethernet Ring Protection Switching L2 Multicast Control
Access Control Lists( ACLs) are standard features on all switches. IGMP Snooping v1/v2/v3
MLD Snooping
Most models have fans (the 24 port 10/100 switch is fan-less) but
Jumbo Frame support (12,288 bytes)
the fans on most of the non- PoE models do not run unless the
Loop Protection
temperature exceeds 36°C thereby providing quiet operation.
One–to–One and Many–to–One Port Mirroring Port Description
There is also built in temperature monitoring that provides high
Root Guard
temperature alerts to the end user so that the optimal operating
STP Pass – Thru
environment can be maintained.
VLAN SUPPORT
800-Series switches can be managed via a Command Line
Interface (CLI), an excellent web interface or via NetSight, Generic Attribute Registration Protocol (GARP)
Extreme Networks’ advanced management application. Generic VLAN Registration Protocol (GVRP)
IEEE 802.1p – Traffic classification
The 800-Series carries an industry-leading Lifetime Warranty
IEEE 802.1q – VLAN Tagging/Trunking
which provides next day shipment, telephone support for one
IEEE 802.1 Q–in–Q
year, bug fixes and web-based support or five years after the
Port – based VLAN
product goes end of sale.
MAC – based VLAN
Protocol – based VLAN
Features/Standards and Protocols Private VLAN
VLAN Trunking
MAC ADDRESS TABLE SIZE
Tagged-based VLAN
16,000 Q–in–Q

VLANS QUALITY OF SERVICE

8 Priority Queues per Port
4,094 VLAN IDs
802.3x Flow Control
Up to 4094 Static VLANs
Class of Service (CoS)
Up to 255 Dynamic VLANs
Rate Limiting/Bandwidth Control
SWITCHING SERVICES Layer 2/3/4 Classification
IEEE 802.1AB – LLDP Multi–layer Packet Processing with ACLs
ANSI/TIA – 1057 – LLDP – MED Mixed Queuing Control – Strict and Weighted Round Robin
Inventory & Capabilities Only Source/Destination MAC Address with ACLs
Source/Destination IP address with ACLs
IEEE 802.1D – MAC Bridges
TCP/UDP port number with ACLs
IEEE 802.1s – Multiple Spanning Trees
IEEE 802.1t – 802.1D Maintenance SECURITY
IEEE 802.1w – Rapid Spanning Tree IEEE 802.3 – Ethernet ARP Spoof Protection
IEEE 802.3ab – GE over Twisted Pair IEEE 802.3ad – DHCP Spoof Protection EAP Pass Thru
Link Aggregation IP Source Guard
8 ports per group IEEE 802.1X Port Authentication
8–port models: 5 groups MAC–based Port Authentication
Optional Local Database for Authentication
24–port models: 14 groups
RADIUS Accounting for network access
48–port models: 26 groups RFC 3580 RADIUS Usage Guidelines—no authorization
mechanism based on Filter–ID Secured Shell (SSHv2)
IEEE 802.3af – PoE

800 Series – Data Sheet 2

Features/Standards and Protocols Operation, Administration & Maintenance – (OAM) support
RMON (Stats, History, Alarms, Events)
Secured Socket Layer (SSL v3)
RSPAN – Remote Port Mirroring
Trusted Host
Simple Network Management Protocol (SNMP) v1/v2c/v3
Denial of Service (DoS) Attack Prevention
SSHv2
BPDU Attack Protection
TACACS+ authentication
Multi–user Authentication Per Port
Web–based Management
Web–based Port Authentication
SYSLOG – up to 4 servers supported Authentication,
ROUTING Authorization and Accounting (AAA) management
IPv4 Static Routes RFC 768 – UDP
IPv6 Default Routing RFC 783 – TFTP
RFC 791 – IP
MIB SUPPORT RFC 792 – ICMP
ANSI/TIA – 1057 – LLDP – MED MIB RFC 793 – TCP
IEEE 802.1AB – LLDP MIB RFC 826 – ARP and ARP Redirect
IEEE 802.1X MIB – Port Access RFC 854 – Telnet
IEEE 802.3ad MIB – LAG MIB RFC 951, RFC 1542 – DHCP/BOOTP Relay
RFC 1213 – MIB/MIB II RFC 1157 – SNMP
RFC 1493, RFC 4188 – BRIDGE–MIB RFC 1901 – Community–based SNMPv2
RFC 1643 – Ethernet – like MIB RFC 1981 – Path MTU for IPv6
RFC 2571 – 2576 – SNMP Framework MIB RFC 2030 – Simple Network Time Protocol (SNTP)
RFC 2618 – RADIUS Authentication Client MIB RFC 2131, RFC 3046 – DHCP Client/Relay
RFC 2620 – RADIUS Accounting Client MIB RFC 2465 – IPv6 MIB
RFC 2674, RFC 4363 – 802.1p MIB RFC 2933 – IGMP MIB
RFC 2674 – QBRIDGE – MIB VLAN Bridge MIB RFC 3176 – sFlow
RFC 2737 – Entity MIB (physical branch only) RFC 3413 – SNMP Applications MIB
RFC 2819 – RMON – MIB RFC 3414 – SNMP User–based Security Module (USM) MIB
RFC 2863 – IfMIB RFC 3415 – View–based Access Control
RFC 2925 – Ping & Traceroute MIB Model for SNMP
RFC 3413 – SNMP v3 Applications MIB
RFC 3414 – SNMP v3 User–based Security Module (USM) MIB
RFC 3415 – View–based Access Control Model for SNMP
RFC 3584 – SNMP Community MIB
RFC 3636 MAU MIB – Obsoletes RFC 2668
RFC 4022 – MIB for TCP
RFC 4113 – MIB for UDP
RFC 6101 - SSL v3

MANAGEMENT & OTHER RFCS

Command Line Interface (CLI) with four access levels
Configuration Upload/Download
Firmware Download
Dual IPv4/IPv6 Management Support
Editable Text–based Configuration File
TFTP Client
Command Logging
Connectivity Fault Management (CFM)
Multi–configuration File Support
System Power & Port Status LEDs
NMS Console
NMS Inventory Manager
Cable Diagnostics
Traceroute
Network Load Balancing

800 Series – Data Sheet 3

800-Series Switch Model Specifications
08H20G4-24 08H20G4-24P 08H20G4-48 08H20G4-48P

Performance

Switching Fabric Bandwidth 9.5 Mpps 9.5 Mpps 13.1 Mpps 13.1 Mpps

Switching Capacity 12.8 Gbps 12.8 Gbps 17.6 Gbps

MAC Address Table 16K 16K 16K 16K

VLANs Supported 255 255 255 255

PoE Specifications

802.3af Interoperable N/A Yes N/A Yes

802.3at Interoperable N/A Yes N/A Yes

System Power N/A 375 watts per switch— up to N/A 375 watts per switch -up to
30 watts per port Per-port 30 watts per port Per-port
switch power monitor: switch power monitor:
Enable/disable Enable/disable
Priority safety Priority safety
Overload & short circuit Overload & short circuit
protection protection

Physical Specifications

Dimensions (H x W x D), 4.4 cm H x 44.1 cm W x 21.66 4.4 cm H x 44.1 cm W x 36.8 4.4 cm H x 44.1 cm W x 4.4 cm H x 44.1 cm W x
Rack Units cm D cm D 37.82 cm D 36.8 cm D
1.73”H x 17.36” W x 8.53” D 1.73” H x 17.36” W x 14.51” D 1.73” H x 17.36” W x 14.89” D 1.73”Hx17.36”Wx 14.51” D
1U 1U 1U 1U

Net Weight 2.30 kg (5.10 lb) 5.40 kg (11.9 lb) 4.45 kg (9.80 lb) 6.09 kg (13.4 lb)

MTBF 597,684 hours 272,651 hours 407,895 hours 219,440 hours

Physical Ports (24) 10/100 ports (24) 10/100 PoE ports (48) 10/100 ports (48) 10/100 PoE ports
(4) 1Gb SFP ports (4) 1Gb SFP ports (4) 1Gb SFP ports (4) 1Gb SFP ports
(2) 10/100/1000 ports (2) 10/100/1000 ports (2) 10/100/1000 ports (2) 10/100/1000 ports
(1) Console port (1) Console port (1) Console port (1) Console port
Max: 28 active ports Max: 28 active ports Max: 52 active ports Max: 52 active ports

Power

Power Supplies 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS

Normal Input Voltage 100 - 240 VAC 100 - 240 VAC 100 - 240 VAC 100 - 240 VAC

Input Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz

Input Current 0.5A max 7.65A max 0.8A max 7.65A max

Power Consumption 19.8W 31.4 W 33.8 W 45.8W

Environmental

Operating Temperature 0° to 50° C (32° to 122° F) 0° to 50° C (32° to 122° F) 0° to 50° C 0° to 50° C
(32° to 122° F) (32° to 122° F)

Non-Operating Temperature -40° to 70° C -40° to 70° C -40° to 70° C -40° to 70° C
(-40° to 158° F) (-40° to 158° F) (-40° to 158° F) (-40° to 158° F)

Heat Dissipation 66 BTUs/Hr 105 BTUs/Hr 114 BTUs/Hr 153 BTUs/Hr

Operating Relative Humidity 5% to 95% (non- 5% to 95% (non- condensing) 5% to 95% (non- 5% to 95%
condensing) condensing) (non- condensing)

Acoustics Fanless: 0dB Fan Low Speed: 36dB Fan Fan Off: 0dB Fan Low Speed: 39dB
High Speed: 49dB Fan On: 42dB Fan High Speed: 49dB

800 Series – Data Sheet 4

 800-Series Switch Model Specifications
08G20G2-08 08G20G2-08P 08G20G4-24

Performance

Switching Throughput Mpps 14.9 Mpps 14.9 Mpps 41.7 Mpps

Switching Capacity 20 Gbps 20 Gbps 56 Gbps

MAC Address Table 16K 16K 16K

VLANs Supported 255 255 255

PoE Specifications

802.3af Interoperable N/A Yes N/A

802.3at Interoperable N/A Yes N/A

System Power N/A 104 watts per switch with up to 30 N/A

watts per port Per-port switch power
monitor:
Enable/disable
Priority safety
Overload & short circuit protection

Physical Specifications

Dimensions (H x W x D), Rack Units 4.06 cm H x 20.95cm W x 22.2cm D 4.06 cm H x 20.95 cm W x 22.2 cm D 4.4 cm H x 44.1 cm W x 21.66
”1.60 H x 8.25” W x 8.74” D 1.60” H x 8.25” W x 8.74” D cm D
1U 1U 1.73” H x 17.36” W x 8.53” D
1U

Net Weight 1.50 kg (3.30 lb) 1.86 kg (4.10 lb) 2.35 kg (5.20 lb)

MTBF 865,139 hours 536,628 hours 532,023 hours

Physical Ports (8) 10/100/1000 ports (8) 10/100/1000 ports (24) 10/100/1000 ports
(2) 1Gb SFP ports (2) 1Gb SFP ports (4) 1Gb SFP ports
(1) Console port (1) Console port (1) Console port
Max: 10 active ports Max: 10 active ports Max: 28 active ports

Power

Power Supplies 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS

Normal Input Voltage 100 - 240 VAC 100 - 240 VAC 100 - 240 VAC

Input Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz

Input Current 0.4A max 2.0A max 0.8A max

Power Consumption 15.9 W 23.3 W 30.0 W

Environmental

Operating Temperature 0° to 50° C 0° to 50° C 0° to 50° C

(32° to 122° F) (32° to 122° F) (32° to 122° F)

Non-Operating Temperature -40° to 70° C 40° to 70° C -40° to 70° C

(-40° to 158° F) (-40° to 158° F) (-40° to 158° F)

Heat Dissipation 47 BTUs/Hr 80 BTUs/Hr 100 BTUs/Hr

Operating Relative Humidity 5% to 95% (non- condensing) 5% to 95% (non- condensing) 5% to 95% (non- condensing)

Acoustics Fan Off: 0dB Fan Off*: 0db Fan Off: 0dB
Fan On: 38dB Fan Low Speed: 38dB Fan On: 44dB

* requires firmware release 1.02.02 Hardware Rev 5C or higher - 60

watts or less at 30°C or less Hardware Rev lower than 5C—30 watts or
less at 30°C or less

800 Series – Data Sheet 5

 800-Series Switch Model Specifications
08G20G4-24P 08G20G4-48 08G20G4-48P

Performance

Switching Throughput Mpps 41.7 Mpps 77.4 Mpps 77.4 Mpps

Switching Capacity 56 Gbps 104 Gbps 104 Gbps

MAC Address Table 16K 16K 16K

VLANs Supported 255 255 255

PoE Specifications

802.3af Interoperable Yes N/A Yes

802.3at Interoperable Yes N/A Yes

System Power 375 watts per switch with up to 30 N/A 375 watts per switch with up to 30
watts per port Per-port switch watts per port Per-port switch
power monitor: power monitor:
Enable/disable Enable/disable
Priority safety Priority safety
Overload & short circuit protection Overload & short circuit protection

Physical Specifications

Dimensions (H x W x D), Rack Units 4.4 cm H x 44.1 cm W x 37.82 cm D 4.4 cm H x 44.1 cm W x 37.82cm D 4.4 cm H x 44.1 cm W x 37.82 cm D
1.73” H x 17.36” W x 14.89” D 1.73” H x 17.36” W x 14.89” D 1.73” H x 17.36” W x 14.89” D
1U 1U 1U

Net Weight 5.54 kg (12.2 lb) 4.50 kg (9.90 lb) 6.14 kg (13.5 lb)

MTBF 275,199 hours 369,938 hours 225,591 hours

Physical Ports (24) 10/100/1000 PoE ports (48) 10/100/1000 ports (48) 10/100/1000 PoE ports
(4) 1Gb SFP ports (4) 1Gb SFP ports (4) 1Gb SFP ports
(1) Console port (1) Console port (1) Console port
Max: 28 active ports Max: 52 active ports Max: 52 active ports

Power

Power Supplies 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS 1 Internal, 1 optional RPS

Normal Input Voltage 100 - 240 VAC 100 - 240 VAC 100 - 240 VAC

Input Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz

Input Current 7.65A max 1.2A max 7.65A max

Power Consumption 36.4 W 56.1 W 63.1 W

Environmental

Operating Temperature 0° to 50° C 0° to 50° C 0° to 50° C

(32° to 122° F) (32° to 122° F) (32° to 122° F)

Non-Operating Temperature -40° to 70° C -40° to 70° C 40° to 70° C

(-40° to 158° F) (-40° to 158° F) (-40° to 158° F)

Heat Dissipation 124 BTUs/Hr 190 BTUs/Hr 215BTUs/Hr

Operating Relative Humidity 5% to 95% (non- condensing) 5% to 95% (non- condensing) 5% to 95% (non- condensing)

Acoustics Fan Low Speed: 38dB Fan Low Speed: 37dB Fan High Speed: Fan Low Speed: 38dB
Fan High Speed: 50dB 42dB Fan High Speed: 51dB

800 Series – Data Sheet 6

800-Series Switch Model Specifications
ALL MODELS

Agency Specifications

Vibration IEC 68-2-6, IEC68-2-36

Shock IEC 68-2-29

Drop IEC 68-2-32

Altitude – operating Operational up to 2,000 m 6,561 feet

Safety UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2, No. 60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1,
2006/95/EC (Low Voltage Directive)

Electromagnetic FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2,
Compatibility EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive)

Environmental 2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS)

Note: Switches do not ship with a console cable since every switch can be fully managed via a web browser.
If Command Line Interface (CLI) management is desired, please order the optional console cable.

Model Number Information

PART NUMBER DESCRIPTION

800-Series 10/100 Switches

08H20G4-24 24 port 10/100 800-Series Layer 2 switch with Quad 1Gb uplinks

08H20G4-24P 24 port 10/100 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks

08H20G4-48 48 port 10/100 800-Series Layer 2 switch with Quad 1Gb uplinks

08H20G4-48P 48 port 10/100 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks

800-Series 10/100/1000 Switches

08G20G2-08 8 port 10/100/1000 800-Series Layer 2 switch with Dual 1Gb uplinks

08G20G2-08P 8 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Dual 1Gb uplinks

08G20G4-24 24 port 10/100/1000 800-Series Layer 2 switch with Quad 1Gb uplinks

08G20G4-24P 24 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks

08G20G4-48 48 port 10/100/1000 800-Series Layer 2 switch with Quad 1Gb uplinks

08G20G4-48P 48 port 10/100/1000 PoE (802.3at) 800-Series Layer 2 switch with Quad 1Gb uplinks

Optional Redundant Power Supplies

08A-RPS-24 Redundant Power Supply for 8 port non-PoE 800-Series switch

08A-RPS-130P Redundant Power Supply for 8 port 802.3at PoE 800-Series switch

08A-RPS-150 Redundant Power Supply for 24 and 48 port non-PoE 800-Series switches (optional shelf mounting listed below)

08A-RPS-500P Redundant Power Supply for 24 and 48 port 802.3at PoE 800-Series switches

Accessories

08A-CON-CBL Console Cable for 800-Series switch

Mounting Options for 8 Port Switches

D2-RMT Rack Mount Kit for D2/800-8 Ports

D2-TBL-MNT Under Table Mount Kit for D2/800-8 Ports

D2-WALL-MNT Wall Mount Kit for D2/800-8 Ports

Mounting Options for RPS Units

STK-RPS-150CH2 2-slot modular power supply shelf (power supply 08A-RPS-150 sold separately)

STK-RPS-150CH8 8-slot modular power supply shelf (power supply 08A-RPS-150 sold separately)

POWER CORDS

In support of its expanding Green initiatives as of July 1st 2014, Extreme Networks will no longer ship power cords with products. Power cords can be ordered separately
but need to be specified at the time order. Please refer to [Link]/product/powercords/ for details on power cord availability for this product.

800 Series – Data Sheet 7

 Transceivers
Extreme Networks transceivers provide flexible connectivity options for Ethernet.
All Extreme Networks transceivers meet the highest quality for extended life
cycle and the best possible return on investment. For detailed specifications,
compatibility and ordering information please go to:
[Link]/product/transceivers

Warranty
As a customer-centric company, Extreme Networks is committed to providing
quality products and solutions. In the event that one of our products fails due to
a defect, we have developed a comprehensive warranty that protects you and
provides a simple way to get your products repaired or media replaced as soon
as possible.

All 800-Series switches come with the Extreme Networks lifetime warranty against
manufacturing defects. For full warranty terms and conditions please go to:
[Link]/support/policies

Service and Support

Extreme Networks provides comprehensive service offerings that range from
Professional Services to design, deploy and optimize customer networks,
customized technical training, to service and support tailored to individual
customer needs. Please contact your Extreme Networks account executive for
more information about Extreme Networks Service and Support.

[Link] Phone +1-408-579-2800

©2015 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see[Link] Specifications and product availability are subject to change without notice. 6093-0815-14

[Link] 800 Series – Data Sheet 8