Kazakh Projects Joint Venture
ТЕНГИЗШЕВРОЙЛ
Limited
TENGIZCHEVROIL
Проект будущего расширения/
Проект управления устьевым давлением
(ПБР/ПУУД)
Future Growth Project/
Wellhead Pressure Management Project
(FGP/WPMP)
СРР 042
Instrument Calculation - 42-F-262
Caustic Settler
Данный документ является контролируемым. Не вносить неутвержденных изменений.
Данный документ выполнен на двух языках. Убедитесь, что изменения внесены в обе версии.
This is a controlled document. No un-authorized modifications.
This document is dual language. Ensure both versions are modified.
№ документа_ Ред: № проекта:
042-0260-JJJ-CAL-000-000-00003-00_L01 X-000-059-08
Document No_ Rev: Project Number:
Статус документа / Life Cycle Status: Issued for Design / Выпущено для проектирования
Защита информации / IP Security: Company Confidential / Конфиденциальная информация компании
Supplier Doc No: Supplier Doc Rev:
Purchase Order No: Contract/AWO No: CW839800
CTR No: Equip No:
Translation Requirement As per DRS: Russian
explain on next page if different) As per this document: Russian
ТЕНГИЗШЕВРОЙЛ Doc. No._Rev:
TENGIZCHEVROIL 042-0260-JJJ-CAL-000-000-00003-00_L01
СРР 042
Instrument Calculation - 42-F-262 Company Confidential / Конфиденциальная информация компании
Информация о документе
Document Information
Согласование документа Подрядчиком / Contractor Approvals:
ФИО/ должность Подпись Дата
Name/Title Signature Date
Подготовил / Originator: PARAG REDKAR 22/12/2016
Проверил / Checked: ANURAG GUPTA 22/12/2016
Утвердил / Approved: ARTHUR WILLIAMS 22/12/2016
Согласование документа в ПБР / TCO FGP Approvals:
ФИО/ должность Подпись Дата
Name/Title Signature Date
Утвердил
Approved
Данные о редакциях документа / Revision History:
Редакция Дата Статус Подготовил Проверил Утвердил
Revision Date Status Originator Checked Approved
L01 22/12/2016 Issued for Design PR AG AW
K02 04/11/2016 Issued for Client Review PR AG AW
K01 22/02/2016 Issued for Client Review PR AG AW
для внутренней
проверки/междисциплинарно
J02 04/11/2015 ABG AG SD
й проверки (МДП) / Inter
Discipline Check
© 2011 by Tengizchevroil LLP. UNCONTROLLED WHEN PRINTED Page 2 of 5
ТЕНГИЗШЕВРОЙЛ Doc. No._Rev:
TENGIZCHEVROIL 042-0260-JJJ-CAL-000-000-00003-00_L01
СРР 042
Instrument Calculation - 42-F-262 Company Confidential / Конфиденциальная информация компании
ПЕРЕЧЕНЬ РЕДАКЦИЙ
REVISION DESCRIPTION
РЕВ / REV PG СTP ОПИСАНИЕ РЕДАКЦИЙ / REVISION DESCRIPTION
J01 4 Inter Discipline Check
J02 5 Inter Discipline Check
K01 5 Issued for Client Review
K02 5 Issued for Client Review
L01 5 Issued for Design
Уточнения
Holds
Уточн. №/
Описание уточнения/ Hold Description Стр./ Page
Hold no.
© 2011 by Tengizchevroil LLP. UNCONTROLLED WHEN PRINTED Page 3 of 5
NOTES
1 LEVEL MEASUREMENT IS BASED ON GUIDED WAVE RADAR TECHNOLOGY AND FOR NOZZLE/MOUNTING REQUIREMENTS REFER TO 'INSTRUMENT DETAILS' TABLE BELOW.
2 THE ARRANGEMENT OF VESSEL, NOZZLES AND FITTINGS ARE INDICATIVE ONLY AND ARE TO BE DETAILED AND SUPPLIED BY MECHANICAL.
3 ALL ELEVATIONS ARE GIVEN WITH RESPECT TO THE BOTTOM LINE AT INSIDE OF VESSEL SHELL (I.E. THE LOWEST INTERNAL SURFACE). ELEVATIONS BELOW THE BTL HAVE NEGATIVE VALUES
4 DIMENSIONS ARE GIVEN IN MM UNLESS OTHERWISE STATED.
5 NOZZLES SHALL BE LOCATED SUCH THAT PROBES ARE CLEAR OF ALL INTERNAL STRUCTURES. ALL INTERNAL CLEARANCES TO BE SUBJECT TO MANUFACTURER'S RECOMMENDATIONS.
6 THE CALIBRATED RANGE MUST NOT OVERLAP THE UPPER AND LOWER TRANSITION ZONES. THESE ARE MEASURED DOWNWARD FROM FLANGE FACE (UTZ) AND UP FROM END OF PROBE (LTZ)
7 INSTRUMENT INSTALLATION SHALL COMPLY WITH THE LEVEL INSTRUMENT SPECIFICATION ICM-DU-5083-TCO, SECTION 15 (GUIDED WAVE RADAR INSTRUMENTS)
8 FOR PROCESS CONDITIONS, REFER TO INSTRUMENT DATASHEET. FOR VESSEL INTERNALS REFER TO VESSEL G/A
LEGEND:
BY INSTRUMENTS
SCOPE
BY OTHERS
VTC - VENDOR TO CONFIRM
GENERAL DETAILS
VESSEL TAG NO. 42-F-262
TRIM 42-0260-PHC-012376-300K21-HCW5
SERVICE CAUSTIC SETTLER
DESIGN HV/40.0 BARG / -40/90°C
OPERATING 13.32 BARG / 38°C
TAN-TAN 12000 mm
DIAMETER 4000 mm
REFERENCE DOCUMENTS
P&ID 042-0260-BBB-PID-000-000-00004-01_L01
VESSEL G/A 042-0260-CCC-DSH-000-000-00008-00_U02
SPEC.: PRESSURE MEASUREMENT CRITERIA ICM-DU-5076-TCO
SPEC.: LEVEL INSTRUMENTS ICM-DU-5083-TCO
SPEC.: INST. IMPLEMENTATION BASIS ICM-DU-6003-TCO
INSTRUMENT DETAILS
NOZZLE LEVEL INSTRUMENT DETAILS L01 22/12/16 ISSUED FOR DESIGN PR AG AW
TAG No. SIZE/ RATING REMARKS K02 04/11/16 ISSUED FOR CLIENT REVIEW PR AG AW
HEIGHT STILLING INTERFACE INTERFACE CALIBRATION
IDENT MOUNTING PROBE TYPE PROBE LENGTH SERVICE
'H' mm WELL DISTANCE LEVEL RANGE AG
PROCESS INSTRUMENT K01 22/02/16 ISSUED FOR CLIENT REVIEW PR AW
STILLING GUIDED WAVE 0 to 3800 mm SD
LIT-6031 L3 BY MECH 3" 300# 3" 300# REQUIRED 3800+VTC INTERFACE LEVEL 1350 mm YES INDICATION AND CONTROL J02 04/11/15 INTERDISCIPLINE CHECK ABG AG
WELL/ TOP RADAR (0-100%)
STILLING GUIDED WAVE 0 to 3800 mm AG/SD
LIT-6080 L4 BY MECH 3" 300# 3" 300# REQUIRED 3800+VTC INTERFACE LEVEL 1350 mm YES SHUTDOWN J01 23/12/14 INTERDISCIPLINE CHECK MSG AG
WELL/ TOP RADAR (0-100%)
REV DATE REVISION BY CHK APPD
PRDJ NO.
X-000-059-08
REV
DOCUMENT NO. 042-0260-JJJ-CAL-000-000-00003-00 L01
© 2011 by Tengizchevroil LLP. UNCONTROLLED WHEN PRINTED Page 4 of 5
NOTES
1 THE ARRANGEMENT AND SPACING, ETC, OF VALVES, PIPES AND FITTINGS ARE INDICATIVE ONLY AND THESE WILL BE DETAILED AND SUPPLIED BY PIPING.
2 THE ARRANGEMENT OF VESSEL, NOZZLES AND FITTINGS ARE INDICATIVE ONLY AND WILL BE DETAILED AND SUPPLIED BY MECHANICAL.
3 ALL ELEVATIONS ARE GIVEN WITH RESPECT TO THE BOTTOM LINE AT INSIDE OF VESSEL SHELL. ELEVATIONS BELOW THE BTL HAVE NEGATIVE VALUES
4 DIMENSIONS ARE STATED IN MM UNLESS OTHERWISE STATED.
5 LEVEL GAUGE IS INSTALLED TO INDICATE PRESENCE OF LIQUID
6 PIPING ISOLATION VALVE TYPE AND SIZE SHALL BE IN ACCORDANCE WITH P&ID AND L-ST-2055
7 MECHANICAL TO ENSURE THAT ALL LEVEL NOZZLES SHALL BE JIG SET AND INCLUDE A SUITABLE NOTE IN VESSEL DATASHEET
LEGEND:
BY INSTRUMENTS
SCOPE
BY OTHERS
GENERAL DETAILS
VESSEL TAG NO. 42-F-262
TRIM 42-0260-PHC-012376-300K21-HCW5
SERVICE CAUSTIC SETTLER
DESIGN HV/40.0 BARG / -40/90°C
OPERATING 13.32 BARG / 38°C
TAN-TAN 12000 mm
DIAMETER 4000 mm
REFERENCE DOCUMENTS
P&ID 042-0260-BBB-PID-000-000-00004-01_L01
VESSEL G/A 042-0260-CCC-DSH-000-000-00008-00_U02
SPEC.: PRESSURE MEASUREMENT CRITERIA ICM-DU-5076-TCO
SPEC.: LEVEL INSTRUMENTS ICM-DU-5083-TCO
SPEC.: INST. IMPLEMENTATION BASIS ICM-DU-6003-TCO
INSTRUMENT DETAILS
NOZZLE IDENT. SIZE / RATING NOZZLE CL-CL / CONNECTION LOCATION
TYPE/ DIAPHRAGM FLUSHING
TAG NUMBER MOUNTING VISIBLE LENGTH REMARKS
DESCRIPTION SEAL RING L01 22/12/16 PR AG AW
UPPER LOWER PROCESS INSTRUMENT (mm) UPPER LOWER ISSUED FOR DESIGN
LG-6077 L1 L2 DIRECT MAGNETIC --- 3" 300# 1" 300# --- 2900 SIDE SIDE INDICATION K02 04/11/16 ISSUED FOR CLIENT REVIEW PR AG AW
K01 22/02/16 ISSUED FOR CLIENT REVIEW PR AG AW
J02 04/11/15 INTER DISCIPLINE CHECK ABG AG SD
J01 23/12/14 INTER DISCIPLINE CHECK MSD AG AG/SD
REV DATE REVISION BY CHK APPD
PROJ NO.
X-000-059-08
DOCUMENT NO. REV
042-0260-JJJ-CAL-000-000-00003-00 L01
© 2011 by Tengizchevroil LLP. UNCONTROLLED WHEN PRINTED Page 5 of 5
