STEREO INTEGRATED AMPLIFIER
A14
2 x 80 Watts iOS / Android Moving magnet Integrated AKM premium 32-bit/
of robust Class control App phono input for Bluetooth aptX 768kHz Digital to Analog
AB power turntable connection Converter
The flagship A14 has the highest power and widest set of loads and dynamic signal peaks. This is an impressively flexible
features in the range. The A14 is rated at 80 watts per channel audio component, designed to accommodate both classic
RMS into 8 ohms, both channels driven. Yet ratings alone do analogue and the latest digital source components supported
not reflect real world usage. The A14 features a rugged power by the on-board AKM 32 bit/768kHz DAC. But its greatest
supply comprising a Rotel-manufactured toroidal transformer strength lies in its ability to render a musical performance
plus slit-foil capacitors to effortlessly handle difficult speaker exactly as the artist intended.
Rotel integrated
amplifiers bring your
sources to life with
amazing fidelity.
See more at
[Link]
STEREO INTEGRATED AMPLIFIER
A14
SPECIFICATIONS
Continuous Power Output 80 watts/ch Digital Section
(20 - 20kHz, < 0.03%, 8 ohms) Frequency Response 10Hz - 80kHz (± 3.0dB, MAX)
Total Harmonic Distortion < 0.03% Signal to Noise Ratio 103 dB
(20 Hz - 20 kHz at rated power) (IHF ”A” weighted)
Intermodulation Distortion < 0.03% Input Sensitivity/Impedance 0 dBfs/75 Ohms
(60 Hz : 7kHz, 4:1)
Preamplifier Output Level 1.3 V (at - 20dB)
Frequency Response
Digital Inputs SPDIF LPCM
Phono Input 20Hz - 15kHz, ± 0.5dB (up to 192kHz / 24 bit)
Line Level Inputs 10Hz - 100kHz, ± 0.5dB PC-USB USB Audio Class 1.0
Damping Factor 220 (up to 96kHz 24bit)
(20 - 20,000 Hz, 8 ohms) USB Audio Class 2.0
Input Sensitivity / Impedance (up to 384kHz 32bit)*
*Driver installation required
Phono Input 3.4 mV / 47k Ohms DSD and DoP support
General
Line Level Inputs 230 mV / 24k Ohms
Power Requirements
Input Overload
Europe 230V, 50Hz
Phono Input 50 mV
USA 120V, 60Hz
Line Level Inputs 4V
Power Consumption 280 watts
Preamp Output / Impedance 1.2 V / 470 Ohms
Standby Power Consumption < 0.5 watts
Tone Controls - Bass / Treble ± 10 dB at 100Hz / 10kHz
Finishes Silver and Black
Signal to Noise Ratio
(“A” weighting) Dimensions (W x H x D) 430 x 93 x 345mm
17" x 3 5/8" x 13 1/2"
Phono Input 90 dB
Front Panel Height 80mm, 3 1/8"
Line Level Inputs 100 dB
Weight (net) 8.2kg, 18 lb
Rotel integrated
amplifiers bring your
sources to life with
amazing fidelity.
See more at
[Link]
