Question #1Topic 1

Your customer needs to accelerate the performance of their DL380 Gen10 servers
running workloads on more active cores at higher Clock frequencies. The customer
wants to know if Core Boosting will help.
What advice should you provide?
 A. It is only supported on ProLiant DL Gen11 servers.
 B. It is a software solution and has performance limitations.
 C. It is only supported on certain Intel processors.
 D. It is an AMD technology so it is unavailable to them.
Correct Answer: C

Question #2Topic 1
Your customer wants to update the firmware for multiple HPE ProLiant MicroServer
Gen10 Plus servers.
Which tool must be used?
 A. HPE Composer
 B. HPE Data Services Cloud console
 C. HPE iLO 5
 D. HPE GreenLake Central
Correct Answer: C
Question #3Topic 1
Your customer is using HPE InfoSight in their environment containing ProLiant and MSA
systems.
Which product supports automatic case creation through InfoSight?
 A. ProLiant DL120 G7
 B. MSA2062
 C. MSA2040
 D. ProLiant DL560 Gen10
Correct Answer: D

Question #4Topic 1
DRAG DROP -
Match the correct scaling approach to each strategy.

Correct

Answer:

Question #5
Your customer has multiple, remote sales offices with one HPE ProLiant server
deployed per Site to run local IT services. They want to centralize the monitoring and
lifecycle management of these servers using a cloud-based offering.
Which tool would demonstrate this functionality?
 A. HPE CloudPhysics
 B. HPE GreenLake Compute Ops Management
 C. HPE GreenLake Data Services Cloud Console
 D. HPE InfoSight
Correct Answer: B

Question #6
Your customer needs help troubleshooting a Layer 3 network routing issue.
Which command should you use?
 A. show LLDP neighbor-info
 B. traceroute
 C. snow startup-config
 D. config-router
Correct Answer: B

Question #7
You need to explain how the HPE GreenLake platform can help your customers
business become more agile.
What information should you provide? (Choose two.)
 A. Customers can control costs since advanced metering allows them to only
pay tor what is used.
 B. The HPE GreenLake platform is always managed by HPE, reducing the need
for internal IT staff.
 C. HPE active-ty monitors, manages, and deploys capacity ahead of demand so
the customer can scale with ease within an installed buffer.
 D. HPE GreenLake provides infinite scale to the customer at no additional cost
with its scale up policy.
 E. HPF GreenLake provides a larger hardware port f01i0 than traditional HPE
hardware solutions.
Correct Answer: AC

Question #8
What value does deploying workloads on HPE GreenLake provide? (Choose two.)
 A. Pay for resources consumed Most Voted
 B. Foundation Care support
 C. Capacity on demand licensing model
 D. Capacity ahead of demand
 E. Single-pane management interface with OneView for storage and server
management
Correct Answer: AD
Question #9
Your customer has run out of storage on their Virtual environment.
How does migrating to HPE GreenLake help this customer?
 A. by implementing a reserve level to ensure there is always storage available
 B. by enabling the customer to use an installed butter and only pay for what
they use
 C. by automatically ordering more storage when capacity levels reach 90%
 D. by allowing the customer to over-provision their storage
Correct Answer: B
Question #10
Your customer needs to capture, store, manage, and analyze a dataset that exceeds
capacity of typical database software tools.
What storage technology should you propose to meet their needs?
 A. Block Storage
 B. Containers
 C. Big Data
 D. File Storage
Correct Answer: C

Question #11
Over the next two years, your customer plans to expand from 25 to 75 employees.
They currently have limited space in the server rack and will need to purchase
additional servers as the business grows.
Which server type should you recommend?
 A. Synergy12000
 B. ML350
 C. DL360
 D. Apollo4200
Correct Answer: C

Question #12
You want to quickly 100k up the list price of an HPE hardware component.
Which pre-saves tool has a Quick Quote function?
 A. HPE smart CID
 B. HPE CloudPhysics
 C. HPE Seismic
 D. HPE Product Bulletin
Correct Answer: D
Question #13
DRAG DROP
Match the HPE server models with the appropriate specification.

Correct
Answer:

Question #14
Your customer has a VMware vSphere cluster that needs to be upgraded to a
SimpliVity Solution. You need to collect data to recommend the correct SimpliVity
Sizing.
What tool will provide this information?
 A. HPE CloudPhysics
 B. HPE Storage Sizing Tool
 C. HPE NinjaSTARS
 D. HPE dHCI Sizer
Correct Answer: A
Question #15
DRAG DROP -
Match each HPE product with the customer requirements it meets.

Correct
Answer:

Question #16
Your customer runs a small datacenter and their storage requirements change on a
month-to-month basis. They want to easily monitor their Cloud costs/usage and grow
their resources.
Which self-service platform will fill their requirements?
 A. HPE InfoSight
 B. HPE GreenLake Сentral
 C. HPE GreenLake Data Services Cloud Console
 D. HPE Compute Ops Management
Correct Answer: B
Question #17
HOTSPOT -
Review the exhibit.
Click where you can access intelligent provisioning.

Correct Answer:
Question #18
DRAG DROP -
Match the RAID level with its capacity overhead. Each option may be used once, more
than once, or not at all.

Correct Answer:
Question #19Topic 1
DRAG DROP -
Match the HPE storage products to their use case.
Correct
Answer:

Question #20
A customer wants to create a 3 TB boot partition on their HPE ProLiant DL360 Gen10
Plus server.
What setting must be enabled to allow this configuration?
 A. Secure Boot
 B. Unlimited Extensible Firmware Interface (UEFI) Boot Mode
 C. Legacy BIOS Boot Mode
 D. Virtualization-Maximum performance

Correct Answer: B

QUESTION: 21

What is a feature of the MSA2060 storage array?

A. Gains AI and machine learning operational through InfoSight
B. Encryption can be enabled by adding 2 self-encrypted drives through Full Disk
Encryption
C. Supports a mixture of both SSD and HDDs within the same system
D. Deduplication and compression are non-intrusive and in-line
Answer(s): C

QUESTION: 22
DRAG DROP (Drag and Drop is not supported)
Match the RAID level to the number of drive failures an
array can handle without losing data. Each option may be
used once, more than once, or not at all.

Explanation:

QUESTION: 23
DRAG DROP (Drag and Drop is not supported)
Map the HPE platform and workload-oriented solutions with the customer's challenge.

Explanation:

QUESTION: 24
Your customer is interested in the new MSA storage array and asks for a demo of the
features and monitoring capabilities.
Which tool should you use?
A. HPE Storage Management Utility (SMU)
B. HPE Data Serves Cloud console (DSCC)
C. HPE StoreServ Management console (SSMC)
D. HPE InfoSight
Answer(s): A

DRAG DROP (Drag and Drop is not supported)

Review the Exhibit:
Match the definition to each colored boxed acronym from the image.

DRAG DROP (Drag and Drop is not supported)

Your customer asks you to explain the benefits that the HPE GreenLake consumption
model can provide. Match the GreenLake benefits to their outcomes.

QUESTION: 27
What benefit does HPE GreenLake Central provide for customers?
A. It provides aggregated usage across on-premises and cloud deployments in
AWS and Microsoft Azure.
B. It provides One-Click provisioning through a pre-packaged application store with
curated, prebuilt images for a wide range of applications.
C. It can run real-time assessments and offer insights about potential exposure to
failures and external attacks.
D. It can analyze different workloads the customer is running and provide guidance
on the best server for the workload.
Answer(s): A

QUESTION: 28
DRAG DROP (Drag and Drop is not supported)
Match the protocol to a fundamental approach for storing data. Each option may be
used once, more than once, or not at all.

A. See Explanation section for answer.

Answer(s): A
Explanation:

QUESTION: 29
Which license is needed in an HPES SimpliVity environment where automate disaster
recovery capabilities are required?
A. Veeam Backup & Replication
B. VMware Site Recovery Manager
C. HPE Peer Persistence
D. HPE RapidDR
Answer(s): D

QUESTION: 30
What does an SSD Wear Gauge define?
A. Remaining lifetime for the SSD drive
B. Type of technology used within the SSD drive
C. Type of interface used for the SSD drive
D. Maximum speed of the SSD drive
Answer(s): A

QUESTION: 31
Your customer wants a new server for a File & Print workload.
What are the most important factors to consider? (Choose two.)
A. support level
B. power supply wattage
C. storage capacity
D. transfer rate
E. form factor
Answer(s): C,D

QUESTION: 32
When designing new server environments, you need to determine the maximum
equipment wattage and thermal requirements at the unit (chassis) and rack level.
Which HPE tool should be used?
A. HPE InfoSight
B. HPE Smart Storage Administrator
C. HPE Power Advisor
D. HPE OneView
Answer(s): C

QUESTION: 34

Your customer has multiple workloads that they want to move from a Cloud service
prover to an on-premises datacenter. They like the flexibility of their current provider
but want dedicated hardware and the ability to scale up and down as business needs
change.
Which platform is designed for this customer use case?
A. HPE Superdome Flex platform
B. HPE Ezmeral Container platform
C. HPE GreenLake platform
D. HPE Apollo Systems
Answer(s): C

QUESTION: 35
You need a tool on a SAN Fabric that will deliver protocol diagnostic, fabric
configuration validation with SPOCK, and assess the health of physical ports with self-
healing and fabric monitoring.
It must perform end-to-end diagnostics while using predefined templates to reduce
configuration errors. Which diagnostic tool should be used?
A. HPE InfoSight
B. On-Line Diagnostics
C. Off-Line Diagnostics
D. Network Orchestrator
Answer(s): D

QUESTION: 36
Your customer needs a server a maximum of two processors that will provide high
performance, manageability, expansion, and security. Which server should you
recommend?
A. DL560
B. DL380
C. DL110
D. DL20
Answer(s): B

QUESTION: 38
A customer needs help setting up their bootable logical drive/volume, checking online
drive firmware activation readiness, and managing device identification LEDs.
What HPE tool should you recommend?
A. Smart Storage Administrator
B. Integrated Smart Update Tool
C. HPE OneView
D. Service pack for ProLiant
Answer(s): A

QUESTION: 39
A customer needs an open-source container orchestration system that supports cloud-
native applications area and provides support for containers with persistent storage at
the same time.
Which platform should you recommend?
A. Kubernetes
B. Openstack Neutron
C. Hadoop
D. Hortonworks Data Platform
Answer(s): A

QUESTION: 40
DRAG DROP (Drag and Drop is not supported)
Match each HPE tool with its business value.
QUESTION: 41
DRAG DROP (Drag and Drop is not supported)
Match the preconfigured HPE workload profile with its definition.

QUESTION: 42
Your customer needs to consolidate data and add additional block-based storage to
their man document management application. They nave five standalone servers with
10 Gb networking.
Which storage technology should you recommend?
A. Network File System
B. Storage Area
C. Direct Attached
D. Network Attached Storage
Answer(s): B

QUESTION: 43
You are considering requirements for a database server.
What is the most important component to employ?
A. File and Print software
B. GPU accelerators
C. Antivirus Software
D. Fault-tolerant memory
Answer(s): D

QUESTION: 44
A customer with a new HPE MSA2060 Gen6 array wants to ensure that best practices
were followed when they installed and set it up.
Which HPE product will meet the customer requirements?
A. HPE SMUv4 Health Check
B. HPE InfoSight
C. HPE OneView Standard
D. HPE MSA Health Check Tool
Answer(s): D

QUESTION: 47
Which combination of HPE solutions can provide data validation on MSL3040 and LTO-
9 cartridges?
A. HPE Command View for Tape Libraries and HPE TapeAssure Advanced
B. Library and Tape Tools and HPE StoreEver TapeAssure Advanced Software
C. HPE Command View for Tape Libraries and HPE StoreEver Data Verification
D. HPE Command View for Tape Libraries and Library and Tape Tools
Answer(s): B

QUESTION: 48
You are preparing a proposal to refresh your customers existing DL380 GE and G7
servers with newer generations. Before making a decision, your customer needs to
know if a refresh is worth the cost.
Which option show the value of the purchase to your customer?
A. Solution sales Enablement Tool
B. Selective Storage presentation
C. TCO/ROI Calculator
D. Smart CID
Answer(s): C

QUESTION: 49
A customer who is new to HPE wants to refresh the hardware infrastructure for their
VMware environment.
Before meeting the customer, you need to perform an assessment to get a better of
their environment. Which HPE tool should you use?
A. OneView
B. CloudPhysics
C. GreenLake Quick Quote
D. InfoSight
Answer(s): B

QUESTION: 50
Your customer is looking for a reference architecture from HPE.
Which tool can translate their requirements a validated configuration?
A. One Config Advanced (OCA)
B. Solution Sales Enablement Tool (SSET)
C. One Config Simple (OCS)
D. HPE Storage Stats Tool
Answer(s): B

QUESTION: 51
You are explaining hardware health monitoring features of an HPE ProLiant DL380
Gen10 Plus server. You need to know how historical events can be viewed, including
fan and power supply failures. Where can this information be found?
A. Integrated Management Log
B. iLO Event
C. HPE Data Ops Manager
D. Data Services Cloud Console
Answer(s): A

QUESTION: 52
Your customer wants to purchase a new HPE MSA controller enclosure fully populated
with SSD fives. They have four existing expansion enclosures from their previous
solution that they want to connect to the new controller.
Two expansion enclosures are fully populated with SFF disks, and the other two are
populated with LFF drives.
Which storage controller enclosure solution should you recommend?
A. HPF MSA1060 with Advanced Data Service (ADS) suite LTLJ
B. HPE MSA1060
C. HPF MSA2060 with Advanced Data service (ADS) suite LTU
D. HPE MSA2060
Answer(s): C

Question 53
Your customer wants to convert their current legacy application to a cloud-native
application. The new application needs to run a web-based user interface closer to end
users in the public cloud environment and keep critical data on-premises.
Which deployment model should be used?
A Cloud service on-premises
B Hybrid Cloud
C Public Cloud only
D Traditional IT on-premises only

Correct Answer: B

Question #54
A customer needs new switches that are stackable, Layer 2, and provide PoE. Which
switch should you recommend?
A CX 6400
B CX6100
C CX 6200F
D CX 6300

Correct Answer: D

Question #55
Your customer needs to deploy 25 virtual machines and wants a pre-integrated
solution that includes compute, storage, and data protection. What is the best
platform for your customer?
A HPE Apollo server portfolio
B HPE SimpliVity platform
C HPE Ezmeral Container platform
D HPE Synergy platform

Correct Answer: B

Question #56
What tool should be used to input customer intent documents (CID) requirements?
A One Config Advanced (OCA)
B HPE NinjaSTARS
C Solution Sales Enablement Tool (SSET)
D HPE Storage STaTS Tool

Correct Answer: A