Slew Drives

RKE-Series
 RKE Series – Manufacturing Specs

• Enclosed Housing
• Gleason cutting operations on worm-wheel gears
• QPQ operations on external slew ring
• Zinc coating operations on internal slew ring
• Normalized worm shaft
• Self-Locking gear set
• Very low backlash – High precision
• IP65 double lip spring loaded sealing
• Slew ring raceway hardened to 50~54 HRC
• Cast iron housing with C3 + ED Coating
 RKE Series – Light Medium Duty

Part Number Drive Efficiency Nominal Max Holding Tilting Static Static Dynamic Dynamic Self
Ratio (%) Torque Torque Torque Moment Radial Axial Radial Axial Locking
(n:1) ([Link]) ([Link]) ([Link]) ([Link]) (lbf) (lbf) (lbf) (lbf)

RKE236-X00 44 40 2,500 4,800 5,010 8,260 21,130 65,190 18,660 21,800 YES

RKE314-X04 61 40 3,300 6,710 7,960 20,280 45,860 122,970 29,670 34,620 YES

RKE400-X04 79 40 6,720 7,010 10,547 42,099 62,946 171,079 33,046 40,690 YES

RKE435-X04 85 40 7,520 9,070 11,210 52,440 75,980 203,450 35,920 41,140 YES

RKE435-X24 85 40 7,520 9,070 31,860 52,440 75,980 203,450 35,920 41,140 YES

RKE500-X04 92 40 8,850 10,399 11,948 75,600 85,867 224,808 36,170 42,556 YES
 RKE Series – Medium Heavy Duty

Part Number Drive Efficiency Nominal Max Holding Tilting Static Static Dynamic Dynamic Self
Ratio (%) Torque Torque Torque Moment Radial Axial Radial Axial Locking
(n:1) ([Link]) ([Link]) ([Link]) ([Link]) (lbf) (lbf) (lbf) (lbf)

RKE523-X00 103 40 10,840 11,500 13,570 82,310 92,840 248,860 38,210 44,510 YES

RKE523-X60 89 40 14,087 18,440 30,240 107,389 125,893 280,112 42,208 51,114 YES

RKE600-X64 92 40 18,483 22,185 26,263 150,462 151,723 406,432 56,427 65,846 YES

RKE639-X04 125 40 17,258 22,495 77,960 149,996 143,887 359,222 75,529 86,319 YES

RKE639-X44 125 40 17,258 22,945 93,552 149,996 143,887 359,222 75,529 86,319 YES

RKE700-X72 102 40 31,585 31,585 42,778 239,708 198,506 531,448 82,946 93,512 YES
 Slew Drive Part Numbers & Customizations

RKE ### - X ## - @@

• RKE: Enclosed IP65 Worm-Wheel High Precision Drive

• ###: Drive size
• X##: Combination of customizations on the location of grease zerks,
motor shaft input size & drive internal geometry
• @: R/L
• @: I/M
 X ## - Grease Zerk Location Options

Top Surface and Top Surface Only

Internal Diameter
X ## - Motor Shaft Input Size

1” 6B Spline 1” Key
R/L- Motor Shaft Input Location

R: Right Hand Side L: Left hand Side

Motor Input

Opposing Side
I/M- Drive Thread Type

I: Imperial Bolt & Grease Threads

M: Metric Bolt & Grease Threads

 8 7 6 5 4 3 2 1
RKE314-X04-RI

PERFORMANCE PARAMETER
F F
GEAR RATIO 61:1 82
15 x 5/8-11 UNC THRU ALL 16 x 5/8-11 UNC 32
EFFICIENCY 40% EQUALLY SPACED EQUALLY SPACED
63
SELF- LOCKING GEAR Yes BASED ON 16 HOLES
BACKLASH CLEARANCE <0.08
MAXMIUM TORQUE 6710 lbf ft B 370
175 ±0.2
TORQUE NOMINAL TORQUE 3300 lbf ft
E HOLDING TORQUE 7960 lbf ft 2 X 1/8-27 NPT E
DETAIL-A GREASE NIPPLE
TILTING MOMENT 20280 lbf ft O-RING & OIL SEAL
45 10 270 ±0.2
RADIAL STATIC LOAD 45860 lbf 145

315
225

250
STATIC
AXIAL STATIC LOAD 122970 lbf
RADIAL DYNAMIC LOAD 29670 lbf
DYNAMIC

175 ±0.05
1/8-27 NPT
AXIAL DYNAMIC LOAD 34620 lbf GREASE NIPPLE 8.5
D MAXIMUM OUTPUT SPEED 1 rpm
D
FLANGE SAE - 2 BOLT FLANGE
SHAFT 1"-6B SPLINE DETAIL B A
'Y' 'X'
O-RING & LIP SEAL

106.4
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED

+0.09
82.5 0.00
3 X 1/8-27 NPT
2x 1/2-13 UNC 27 GREASE NIPPLE
39 53 11.5
57

C 172 C
344

24
+0.08
25.40 0.00

+0.04
6.35 0.00
B B

PAINT: PROPRIETARY AND CONFIDENTIAL:

APPV'D ATO 2022/12/17 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY

21.8 +0.08
CHK'D RAJ 2022/12/17 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.

M8x1.25 - 6H 16 0.00
DRAWN ARUN 2022/12/17 UNLESS OTHERWISE SPECIFIED ALL
DIMENSIONS ARE IN MILLIMETERS

DEPT AUTHORITY DATE

DOC TYPE:
OVER 1000 1 SLEWDRIVE
.
INPUT SHAFT VIEW-
DETAIL DIMENSIONS
OVER120
400UPTO
UPTO400 0.5 2
WITHOUT OVER
1000
TITLE: IMPERIAL SLEWDRIVE DEBURR AND BREAK SHARP EDGES REVISION: C
A VIEW-'Y' 'X' TOLERANCE
0.3 0
A
VALUES ARE OVER 30 UPTO 120
.
WITH 1"-6B SPLINED SHAFT Legal Owner:
ACCORDING TO
0.2
VARIATIONS ON "DIN ISO 2768"
OVER 6 UPTO 30

0.1
8 DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE314-X04-RI WEIGHT: 46.30 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE314-X04-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/12/17 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/12/17 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/12/17
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
0.5 TITLE:
WITHOUT OVER 120 UPTO 400 DEBURR AND BREAK SHARP EDGES REVISION: C
A TOLERANCE
OVER 30 UPTO 120 0.3
IMPERIAL SLEW DRIVE WTH A
Legal Owner:
VALUES ARE
ACCORDING TO
1'' 6B SPLINED SHAFT
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE314-X04-RI WEIGHT: 46.30 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE400-X04-RI
PERFORMANCE PARAMETER
F F
GEAR RATIO 79:1 82
EFFICIENCY 40% 436
63
SELF- LOCKING GEAR YES 18 x 5/8-11 UNC 50 2 X 1/8-27 NPT
EQUALLY SPACED GREASE NIPPLE
BACKLASH CLEARANCE <0.15 B
MAXMIUM TORQUE 7010 lbf ft 19 x 13.49 THRU ALL
5/8-11 UNC THRU ALL
TORQUE NOMINAL TORQUE 6720 lbf ft BASED ON 20 HOLES
E HOLDING TORQUE 10547 lbf ft E
DETAIL A 259 ±0.2
TILTING MOMENT 42099 lbf ft O-RING & OIL SEAL 45 10 358 ±0.2
RADIAL STATIC LOAD 62496 lbf
STATIC
AXIAL STATIC LOAD 171079 lbf 229

390
310

340
RADIAL DYNAMIC LOAD 33046 lbf
DYNAMIC
AXIAL DYNAMIC LOAD 40690 lbf 1/8-27 NPT
GREASE NIPPLE
MAXIMUM OUTPUT SPEED 1 rpm

222.50 ±0.05
D FLANGE SAE - 2 BOLT FLANGE D
SHAFT 1"-6B SPLINE DETAIL B
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED O RING & LIP SEAL 8.5

106.4
'Y'
'X'

+0.09
82.50 0.00
C 3 X 1/8-27 NPT C
2 x 1/2-13 UNC 27 GREASE NIPPLE
39
52 53 11.50
182

364
+0.04
6.35 0.00
+0.08
B 21.60 0.00 B
+0.08
25.40 0.00 PROPRIETARY AND CONFIDENTIAL:
APPV'D ATO 2022/11/22 PAINT:
THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/22 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
24

DRAWN ARUN 2022/11/22

UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS
M8x1.25 - 16
OVER 1000 1.2 DOC TYPE:
VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
OVER 30 UPTO 120 0.3 1"-6B SPLINED INPUT SHAFT Legal Owner:
A
VIEW-"X" VALUES ARE
ACCORDING TO
0.2
VIEW-"Y" INPUT SHAFT DETAIL "DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE400-X04-RI WEIGHT: 58.67 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE400-X04-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/11/22 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/22 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/22
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3 1"-6B SPLINED INPUT SHAFT Legal Owner:
A
ACCORDING TO
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE400-X04-RI WEIGHT: 58.67 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE435-X04-RI
PERFORMANCE PARAMETER
F F
GEAR RATIO 85:1 82 18 x 13.49 56.93
EFFICIENCY 40% 5/8-11 UNC 50.00
63
SELF- LOCKING GEAR YES 23 x 5/8-11 UNC THRU ALL 470
BACKLASH CLEARANCE <0.08 B EQUALLY SPACED
BASED ON 24 HOLES 295 ±0.2
MAXMIUM TORQUE 9070 lbf ft
TORQUE NOMINAL TORQUE 7520 lbf ft DETAIL A 1/8-27 NPT
O-RING & OIL SEAL GREASE NIPPLE
E HOLDING TORQUE 11210 lbf ft 390 ±0.2 E
TILTING MOMENT 52440 lbf ft 45 10
RADIAL STATIC LOAD 75980 lbf 265

420

345

380
STATIC
AXIAL STATIC LOAD 203450 lbf
RADIAL DYNAMIC LOAD 35920 lbf
DYNAMIC
AXIAL DYNAMIC LOAD 41140 lbf
2x1/8-27 NPT

235 ±0.05
MAXIMUM OUTPUT SPEED 1 rpm GREASE NIPPLE
D FLANGE SAE - 2 BOLT FLANGE 8.5 D
SHAFT 1"-6B SPLINE DETAIL-B A
LIP SEAL & O-RING
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED

106.4
'Y' 'X'

+0.09
82.5 0.00
3 x 1/8-27 NPT
2 x 1/2-13 UNC 27 GREASE NIPPLE
39 57 53 11.5
C 182 182 C
364

+0.08 +0.04
21.80 0.00 6.35 0.00
B B

PAINT: PROPRIETARY AND CONFIDENTIAL:

APPV'D ATO 2022/11/21 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/21 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
24

EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.

DRAWN ARUN 2022/11/21
+0.08 DEPT AUTHORITY DATE
UNLESS OTHERWISE SPECIFIED ALL
DIMENSIONS ARE IN MILLIMETERS

M8x1.25 - 16 25.40 0.00 OVER 1000 1.2 DOC TYPE:

VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: C
A TOLERANCE
OVER 30 UPTO 120 0.3 1"-6B SPLINED INPUT SHAFT Legal Owner:
A
VIEW-X VALUES ARE
ACCORDING TO
0.2

VIEW-Y INPUT SHAFT DETAIL "DIN ISO 2768"

OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE435-X04-RI WEIGHT: 61.72 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE435-X04-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/11/21 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/21 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/21
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: DEBURR AND BREAK SHARP EDGES REVISION: C
A TOLERANCE IMPERIAL SLEWDRIVE WITH A
VALUES ARE OVER 30 UPTO 120 0.3 Legal Owner:
ACCORDING TO
1"-6B SPLINED INPUT SHAFT
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE435-X04-RI WEIGHT: 61.72 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE500-X04-RI
PERFORMANCE PARAMETER 82 23 x 5/8-11 UNC THRU ALL
F 506 F
GEAR RATIO 92 : 1 63 EQUALLY SPACED
BASED ON 24 HOLES
EFFICIENCY 40% 24 x 5/8-11 UNC 50
SELF- LOCKING GEAR Yes EQUALLY SPACED
B 420 ±0.2
BACKLASH CLEARANCE <0.15
MAXMIUM TORQUE 10399 lbf ft 330 ±0.2

TORQUE NOMINAL TORQUE 8850 lbf ft

E HOLDING TORQUE 11948 lbf ft 45 10 E
DETAIL-A
TILTING MOMENT 75600 lbf ft O RING & OIL SEAL
1/8-27 NPT
RADIAL STATIC LOAD 85876 lbf GREASE
STATIC NIPPLE
AXIAL STATIC LOAD 224808 lbf 300

457

378

399
RADIAL DYNAMIC LOAD 36170 lbf
DYNAMIC
AXIAL DYNAMIC LOAD 42566 lbf
2 X 1/8-27 NPT
MAXIMUM OUTPUT SPEED 1 rpm GREASE

255.18 ±0.05
D FLANGE SAE - 2 BOLT FLANGE NIPPLE D
SHAFT 1"-6B SPLINE
DETAIL B
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED O RING & LIP SEAL
8.5

'Y' A

106.4
'X'
C C

+0.09
82.50 0.00
3 X 1/8-27 NPT
2 x 1/2-13 UNC 27 GEASE NIPPLE
39 57 53 11.50
195

390
+0.04
6.35 0.00
B B
+0.08
25.40 0.00 PROPRIETARY AND CONFIDENTIAL:
APPV'D ATO 2022/01/07 PAINT:
THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/01/07 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/01/07
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS
24

OVER 1000 1.2 DOC TYPE:

M8x1.25 - 6H 16 +0.08 VARIATIONS ON

OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
21.80 0.00 WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3
1"-6B SPLINED INPUT SHAFT Legal Owner:
A
VIEW-'X' ACCORDING TO
0.2
INPUT SHAFT DETAIL "DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
VIEW-'Y'
0.5 UPTO 6
RKE500-X04-RI WEIGHT: 69.48 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE500-X04-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/01/07 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/01/07 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/01/07
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3 1"-6B SPLINED INPUT SHAFT Legal Owner:
A
ACCORDING TO
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE500-X04-RI WEIGHT: 69.48 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE523-X00-RI
PERFORMANCE PARAMETER 20 x 5/8-11 UNC THRU ALL
F 82 20 x 5/8-11 UNC THRU ALL EQUALLY SPACED F
GEAR RATIO 103:1 EQUALLY SPACED
63 559
EFFICIENCY 40%
SELF- LOCKING GEAR Yes
365 ±0.2
BACKLASH CLEARANCE <0.15
MAXMIUM TORQUE 11500 lbf ft B 480 ±0.2
2 X 1/8-27 NPT
TORQUE NOMINAL TORQUE 10840 lbf ft DETAIL-A GREASE NIPPLE
O-RING & OIL SEAL 45 10
E HOLDING TORQUE 13570 lbf ft E
TILTING MOMENT 82310 lbf ft
RADIAL STATIC LOAD 92840 lbf 324
STATIC

460
510
422
AXIAL STATIC LOAD 248860 lbf
RADIAL DYNAMIC LOAD 38210 lbf
DYNAMIC 1/8-27 NPT
AXIAL DYNAMIC LOAD 44510 lbf GREASE
NIPPLE
MAXIMUM OUTPUT SPEED 1 rpm

282 ±0.05
D FLANGE SAE - 2 BOLT FLANGE D
DETAIL-B
SHAFT 1"-6B SPLINE O-RING & LIP SEAL
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED 8.5

106.4
'Y' 'X'

+0.09
82.5 0.00
2 x 1/2-13 UNC 27 3 X 1/8-27 NPT
C 39 GREASE NIPPLE 53 11.5 C
56
195
390

+0.04
+0.08 6.35 0.00
21.80 0.00
B B

PAINT: PROPRIETARY AND CONFIDENTIAL:

24

APPV'D ATO 2022/11/23 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/23 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/23
+0.08 UNLESS OTHERWISE SPECIFIED ALL
25.40 0.00 DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

M8x1.25 - 16 VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS

VIEW-'X' WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A INPUT SHAFT DETAILS
TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3
1"-6B SPLINED INPUT SHAFT Legal Owner:
A
ACCORDING TO
VIEW-'Y' "DIN ISO 2768"
OVER 6 UPTO 30 0.2
DWG. NO: ROTARYMASTER
0.1 31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE523-X00-RI WEIGHT: 83.27 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE523-X00-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/11/23 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/23 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/23
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3
IMPERIAL SLEWDRIVE WITH
Legal Owner:
A
ACCORDING TO
1"-6B SPLINED INPUT SHAFT
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE523-X00-RI WEIGHT: 83.27 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE523-X60-RI
107
583
PERFORMANCE PARAMETER 20 x 5/8-11 UNC 50
F 77 EQUALLY SPACED F
GEAR RATIO 89:1 20 x 5/8-11 UNC THRU ALL
EQUALLY SPACED 480 ±0.2
EFFICIENCY 40%
SELF- LOCKING GEAR Yes B
BACKLASH CLEARANCE <0.15 365 ±0.2
MAXMIUM TORQUE 18440 lbf ft
TORQUE NOMINAL TORQUE 14087 lbf ft
E HOLDING TORQUE 30240 lbf ft E
45 21 1/8-27 NPT
TILTING MOMENT 107389 lbf ft GREASE NIPPLE
RADIAL STATIC LOAD 125893 lbf DETAIL A
STATIC O RING &
AXIAL STATIC LOAD 280112 lbf OIL SEAL

RADIAL DYNAMIC LOAD 42208 lbf

535
422

460
DYNAMIC
AXIAL DYNAMIC LOAD 51114 lbf 2 X 1/8-27 NPT
MAXIMUM OUTPUT SPEED GREASE NIPPLE
1 rpm
D D
FLANGE SAE - 2 BOLT FLANGE
SHAFT 1"-6B SPLINE
DETAIL B

300 ±0.05
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED O RING &
LIP SEAL

324 8.5

C C
A

106.4
'Y'
'X'

+0.09
82.5 0.00
3 X 1/8-27 NPT
GREASE NIPPLE
2 x 1/2-13 UNC 22 52 60 53 11.5

+0.08 203
21.80 0.00 +0.04
B 6.35 0.00 406 B

+0.08 APPV'D ATO 2022/11/28 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
25.40 0.00 CHK'D RAJ 2022/11/28 CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
24

DRAWN NNR 2022/11/28

UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

M8x1.25 - 6H 16 OVER 1000 1.2 DOC TYPE:

VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPRIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3
1"-6B SPLINED INPUT SHAFT Legal Owner:
A
ACCORDING TO
0.2
VIEW-'Y' VIEW-'X'
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.

INPUT SHAFT DETAIL

0.5 UPTO 6
RKE523-X60-RI WEIGHT: 110.84 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE523-X60-RI

F F

E E

D D

C C

B B

PAINT: PROPRIETARY AND CONFIDENTIAL:

APPV'D ATO 2022/11/28 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/28 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN NNR 2022/11/28
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE IMPRIAL SLEWDRIVE WITH 1"-6B SPLINED A
VALUES ARE OVER 30 UPTO 120 0.3 Legal Owner:
INPUT SHAFT
ACCORDING TO
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE523-X60-RI WEIGHT: 110.84 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE600-X64-RI
PERFORMANCE PARAMETER 108
F F
GEAR RATIO 92:1 32 x 5/8-11 UNC 40
73
EFFICIENCY 40% EQUALLY SPACED
612
SELF- LOCKING GEAR YES
B
BACKLASH CLEARANCE <0.15
MAXMIUM TORQUE 22185 lbf ft 520 ±0.20
420 ±0.20
TORQUE NOMINAL TORQUE 18483 lbf ft DETAIL A
O-RING & OIL SEAL 31x 17.50 22 mm
E HOLDING TORQUE 26263 lbf ft 62 18 5/8-11 UNC THRU ALL E
TILTING MOMENT 150462 lbf ft EQUALLY SPACED
BASED ON 32 HOLES
RADIAL STATIC LOAD 151723 lbf
STATIC 2 x 1/8-27NPT 380 1/8-27 NPT
AXIAL STATIC LOAD 406432 lbf GREASE NIPPLE GREASE NIPPLE

480
560
480
RADIAL DYNAMIC LOAD 56427 lbf
DYNAMIC
AXIAL DYNAMIC LOAD 65846 lbf DETAIL B
MAXIMUM OUTPUT SPEED 1 rpm O-RING & LIP SEAL

D FLANGE SAE - 2 BOLT FLANGE D

305 ±0.05
SHAFT 1"-6B SPLINE
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED

8.50

106.4
C C

+0.09
82.5 0.00
2 x 1/2-13 UNC 27 3 x 1/8-27 NPT
GREASE NIPPLE
56 57 53 11.5

212

+0.04 424
6.35 0.00

B +0.08 B
25.40 0.00
PAINT: PROPRIETARY AND CONFIDENTIAL:
APPV'D ATO 2022/11/24 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/24 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005 EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/24
24

UNLESS OTHERWISE SPECIFIED ALL

DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

M8x1.25 16 OVER 1000 1.2 DOC TYPE:

+0.08
21.80 0.00 VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
OVER 30 UPTO 120 0.3 A
VALUES ARE 1"-6B SPLINED INPUT SHAFT Legal Owner:
VIEW-'X' ACCORDING TO
0.2
INPUT SHAFT DETAIL "DIN ISO 2768"
OVER 6 UPTO 30 DWG. NO: ROTARYMASTER
VIEW-'Y' 0.5 UPTO 6 0.1
RKE600-X64-RI 31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.

STANDARD NOMINAL LENGTH TOLERANCE CLASS WEIGHT: 105.7 kg SCAL[Link] A3 SHEET 1 OF 2

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE600-X64-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/11/24 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/24 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/24
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
OVER 30 UPTO 120 0.3 Legal Owner:
A
VALUES ARE 1"-6B SPLINED INPUT SHAFT
ACCORDING TO
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE600-X64-RI WEIGHT: 105.7 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE639-X04-RI

PERFORMANCE PARAMETER
F F
GEAR RATIO 125:1 136 36 x 16.67 58.62
83 3/4-10 UNC 51.00 35 x 16.67 58.62
EFFICIENCY 40% 3/4-10 UNC 51.00
SELF- LOCKING GEAR Yes BASED ON 36 HOLES

BACKLASH CLEARANCE <0.15 B 670

465 ±0.3
MAXMIUM TORQUE 22495 lbf ft 2x1/8-27 NPT
GREASE
TORQUE NOMINAL TORQUE 17258 lbf ft DETAIL A NIPPLE
E O-RING & OIL SEAL E
HOLDING TORQUE 77960 lbf ft 78 40
TILTING MOMENT 149946 lbf ft 584 ±0.30
RADIAL STATIC LOAD 143887 lbf
STATIC
AXIAL STATIC LOAD 359222 lbf
RADIAL DYNAMIC LOAD 75529 lbf 432
DYNAMIC

432

520
AXIAL DYNAMIC LOAD 86319 lbf

620
MAXIMUM OUTPUT SPEED 1 rpm
D FLANGE SAE - 2 BOLT FLANGE DETAIL B D
SHAFT 1"-6B SPLINE O-RING & LIP SEAL
1/8-27 NPT

339.10 ±0.05
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED GREASE
NIPPLE

8.5

C C
'Y' A 'X'

106.4

+0.09
82.5 0.00
3 x 1/8-27 NPT
2 x 1/2-13 UNC 27 GREASE NIPPLE
75 53 11.5
57
+0.04 234
6.35 0.00
468
B B
+0.08
25.40 0.00 APPV'D ATO 2022/11/25 PAINT: PROPRIETARY AND CONFIDENTIAL:
THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/25 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/25
24

UNLESS OTHERWISE SPECIFIED ALL

DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

M8x1.25 - 6H 16
+0.08
VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS

21.80 0.00 WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3 1"-6B SPLINED INPUT SHAFT Legal Owner:
A
VIEW-X ACCORDING TO
0.2
VIEW-Y INPUT SHAFT DETAIL
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE639-X04-RI WEIGHT: 143.2 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE639-X04-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/11/25 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/11/25 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/11/25
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE IMPERIAL SLEWDRIVE WITH A
VALUES ARE OVER 30 UPTO 120 0.3 Legal Owner:
ACCORDING TO
1"-6B SPLINED INPUT SHAFT
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE639-X04-RI WEIGHT: 143.2 kg SCAL[Link] A3
STANDARD NOMINAL LENGTH TOLERANCE CLASS SHEET 2 OF 2

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE639-X44-RI
36 X
PERFORMANCE PARAMETER 136 3/4-10 UNC 51.00
F EQUALLY SPACED 35 x 3/4-10 UNC 51.00 F
GEAR RATIO 125:1
83 EQUALLY SPACED
EFFICIENCY 40% BASED ON 36 HOLES
584 ±0.3
SELF- LOCKING GEAR Yes
B 465 ±0.30
BACKLASH CLEARANCE <0.15
2x 1/8-27 NPT
MAXMIUM TORQUE 22495 lbf ft GREASE NIPPLE
TORQUE NOMINAL TORQUE 17258 lbf ft
E HOLDING TORQUE 93552 lbf ft DETAIL B E
O-RING & LIP SEAL
TILTING MOMENT 149946 lbf ft 40
78
RADIAL STATIC LOAD 143887 lbf
STATIC
AXIAL STATIC LOAD 359222 lbf 1/8-27 NPT
GREASE NIPPLE

620.00
RADIAL DYNAMIC LOAD 75529 lbf

432
520
DYNAMIC
AXIAL DYNAMIC LOAD 86319 lbf

750.08
MAXIMUM OUTPUT SPEED 1 rpm
432
D FLANGE SAE - 2 BOLT FLANGE
DETAIL A D
SHAFT 1"-6B SPLINE O-RING & OIL SEAL

339.10 ±0.05
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED

670 8.50
A

C 'Y' 'X' C

106.4

+0.09
82.50 0.00
3x 1/8-27 NPT
GREASE NIPPLE
75 57 53 11.50
2 x 1/2-13 UNC 27 234

+0.04 468
6.35 0.00
+0.08
B 25.40 0.00 B

PAINT: PROPRIETARY AND CONFIDENTIAL:

24

APPV'D ATO 2022/06/03 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/06/03 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
M8x1.25 - 6H 15 DRAWN ARUN 2022/06/03
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

+0.08
21.80 0.00 VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
DIMENSIONS

VIEW-Y WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
0.3
1"-6B SPLINED INPUT SHAFT
A
VIEW-X VALUES ARE OVER 30 UPTO 120 Legal Owner:
ACCORDING TO
INPUT SHAFT DETAIL "DIN ISO 2768"
OVER 6 UPTO 30 0.2
DWG. NO: ROTARYMASTER
0.1 31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE639-X44-RI WEIGHT: 145.2 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE639-X44-RI

F F

E E

D D

C C

B B

APPV'D ATO 2022/06/03 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/06/03 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/06/03
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3
IMPERIAL SLEWDRIVE WITH 1"-6B SPLINED
Legal Owner:
A
ACCORDING TO
INPUT SHAFT
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE639-X44-RI WEIGHT: 145.2 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE700-X72-DI 130
100 24 x 16.67 40.00
PERFORMANCE PARAMETER 24 x3/4-10 UNC 40
F 50 EQUALLY SPACED 3/4-10 UNC 39.90 F
GEAR RATIO 102 : 1
EFFICIENCY 40% B 675 ±0.3
SELF- LOCKING GEAR YES 770
BACKLASH CLEARANCE <0.15
565 ±0.3
MAXMIUM TORQUE 31585 lbf ft
60 21
TORQUE NOMINAL TORQUE 31585 lbf ft DETAIL A
E HOLDING TORQUE 42778 lbf ft O-RING & OIL SEAL 1/8-27 NPT E
GREASE NIPPLE
TILTING MOMENT 239707 lbf ft
2x1/8-27 NPT 525
RADIAL STATIC LOAD 198506 lbf GREASE NIPPLE
STATIC

720

627

625
AXIAL STATIC LOAD 531448 lbf
RADIAL DYNAMIC LOAD 82946 lbf
DYNAMIC
AXIAL DYNAMIC LOAD 93512 lbf
MAXIMUM OUTPUT SPEED 1 rpm
DETAIL B
D FLANGE SAE - 2 BOLT FLANGE O RING & LIP SEAL D

392 ±0.05
SHAFT 1 1/4"KEY
NOTE: ALL SLEWDRIVE ARE PRE-LUBRICATED

8.5

106.4
'Y'
'X'
C C

+0.09
82.5 0.00
2 x 1/2-13 UNC 22 3x1/8-27 NPT
61 GREASE NIPPLE
64 55 11.5

235
+0.058
9.55 0.000 470

B B

+0.160
34.65 0.000
PAINT: PROPRIETARY AND CONFIDENTIAL:
APPV'D ATO 2022/12/03 THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/12/03 C3 M BLACK RAL 9005 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/12/03
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1.2 DOC TYPE:

VARIATIONS ON
OVER 400 UPTO 1000 0.8 SLEWDRIVE
+0.16 DIMENSIONS

31.75 0.00 WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3 1 1/4" KEYED INPUT SHAFT Legal Owner:
A
VIEW-X ACCORDING TO
0.2
VIEW-Y INPUT SHAFT DETAIL "DIN ISO 2768"
OVER 6 UPTO 30 DWG. NO: ROTARYMASTER
0.1 31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE700-X72-DI WEIGHT: 191.7 kg SCAL[Link] A3 SHEET 1 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
RKE700-X72-DI

F F

E E

D D

C C

B B

APPV'D ATO 2022/12/03 PAINT: PROPRIETARY AND CONFIDENTIAL:

THE INFORMATION AND/OR CONTENT HEREON THE DRAWING IS PROVIDED TO YOU BY ROTARY MASTER AND/OR
CORROSION CATEGORY ITS SUBSIDIARIES & INCLUDES INFORMATION OWNED BY ROTARY MASTER. © . ROTARY MASTER PROHIBITS ANY
CHK'D RAJ 2022/12/03 COPYING AND/OR TRANSMITTING THIS DRAWING INFORMATION & ITS REPRODUCTION OR USE FOR ANY PURPOSE
C3 M BLACK RAL 9005
EXCEPT FOR THAT WHICH IT IS LOANED UNLESS EXPRESSLY PERMITTED IN WRITING.
DRAWN ARUN 2022/12/03
UNLESS OTHERWISE SPECIFIED ALL
DEPT AUTHORITY DATE DIMENSIONS ARE IN MILLIMETERS

OVER 1000 1 DOC TYPE:

.
VARIATIONS ON
OVER 400 UPTO 1000 0.8 2 SLEWDRIVE
DIMENSIONS
WITHOUT OVER 120 UPTO 400 0.5 TITLE: IMPERIAL SLEWDRIVE WITH DEBURR AND BREAK SHARP EDGES REVISION: B
A TOLERANCE
VALUES ARE OVER 30 UPTO 120 0.3 1 1/4" KEYED INPUT SHAFT Legal Owner:
A
ACCORDING TO
0.2
"DIN ISO 2768"
OVER 6 UPTO 30

0.1
DWG. NO: ROTARYMASTER
31A, 15, 4th St, North Phase, Sidco Industrial Estate, Ambattur, Chennai.
0.5 UPTO 6
RKE700-X72-DI WEIGHT: 191.7 kg SCAL[Link] A3 SHEET 2 OF 2
STANDARD NOMINAL LENGTH TOLERANCE CLASS

8 7 6 5 4 3 2 1
 Contact Us

+1 (905) 828-4001 +91 44-29560273

info@[Link] info@[Link]

[Link] [Link]

6-2505 Dunwin Drive 31A/15. 4th Cross Main Road.

Mississauga, ON L5L 1T1 Sidco Industrial Estate. Ambattur
Canada Chennai, 600098
Tamil Nadu TN, India