Information
VoIP for smaller companies and offices
HiPath BizIP V1
[Link]/enterprise
Just Communicate
HiPath BizIP – a revolutionary technology for total IP communication. Voice and data com-
munication via a DSL connection, and only one internal line network for both the PC and
the telephone. Simplicity itself! Connect the BizIP telephones to the LAN ... and start en-
joying low-best Internet telephony.
HiPath BizIP is the modern voice and data
communication system for small compa-
A wide range of voice telephony features
such as DSS keys, combined with applica-
Lower costs
nies, offices, agencies, and the SOHO sec- tions such as CTI (Computer Telephony Inte-
The integration of a router and gateway in
tor. HiPath BizIP is a cost-effective solution gration) and integrated VoiceMail, guaran- one and the same system optimizes hard-
for as few as two subscribers, and can be tee support for all aspects of professional ware costs. And the combination of voice
progessively extended to cater for more communication.
and data communication on the LAN also
than 15 employees.
reduces the costs for administration and
HiPath BizIP is a secure and reliable commu-
SIP – the standard for In- maintenance. Existing Internet connections
can be utilized more economically by also
nication system for Internet telephony ternet telephony using them for calls to the public network.
(Voice-over-IP). Its revolutionary peer-to-
peer technology makes for simple device in- The number of ISDN lines can be reduced,
HiPath BizIP supports the open and standa-
leading to lower basic charges. Moreover,
stallation and configuration. rized SIP protocol (Session Initiation Proto-
there is no charge for Internet connections
col) for Internet telephony. This means that
A special BizIP access device with integrated to partners within the networks of associat-
users can take advantage of VoIP telephony
gateway function connects the internal ed providers.
provider offers using either system connec-
data network to ISDN and the Internet. tions or individual call numbers. Such low-
Routing functionality controls the broad- cost Internet services represent a new di- Flexible expansion op-
band connection to the Internet for both
data traffic and Internet telephony.
mension in communication. Quality of Ser-
vice (QoS) always gives priority to voice
tions
communication, and the codecs used guar- HiPath BizIP is highly flexible when it comes
HiPath BizIP provides pure IP technology
antee the highest transmission quality. Due
and features high-quality telephones with to adding additional telephones. Tele-
to mixed operation involving both ISDN and
intuitive user operation via display and dia- phones are connected to existing LAN ca-
xDSL network connections, existing call bles ("one-wire-to-the-desk") and connect-
log keys. The portfolio also includes stan-
numbers can be retained, and a step-by- ed to the PC via the integrated miniswitch.
dard SIP terminals such as WLAN phones
step migration to SIP-based provider servic-
and is thus able to satisfy all the require- The BizIP telephones detect each other dur-
es is possible.
ments of a modern working environment. ing automatic configuration and require no
further administration. Analog devices such
as fax machines or cordless telephones can
be connected just as easily as standard SIP
terminals.
HiPath BizIP – Components
HiPath BizIP is a clearly-structured product concept with optimally aligned components and flexible expansion and accessory options.
BizIP AD 20 Never miss a call: Integrated voicemail
This access device handles communication This secure mailbox is extremely easy to
with public voice and data networks. Net- operate and offers convenient user
work connections are simple to administer prompting via display, function keys and
using the browser-based Installation Assis- dialog keys.
tant. ● Up to 20 minutes of recorded voice
● Ethernet connection for broadband per telephone
Internet access (DSL modem) ● Message waiting indication
● Ethernet connection for internal LAN ● Access protection (PIN)
(10/100 Mbit/s) ● User prompting (via display and voice)
● 2 ISDN network connections (S0) ● Access messages from anytelephone
● 2 analog subscriber interfaces ● Callback
● SIP gateway ● System and personal announcements
● Router and stateful firewall ● Group mailbox
BizIP 410 e
Standard system telephone (in artic or
manganese) with interactive user promp-
ting via display and dialog keys.
● Two-line display
● Loudspeaker and headset connection
● 10/100Base-T miniswitch and Power
over Ethernet
● 12 programmable function keys with
LEDs
● 3 dialog keys: Yes, Back and Continue
BizIP 410 A
Feature telephone, as BizIP 410 e, but also
with
● four-line illuminated display
● speakerphone function
● 19 programmable function keys with
LEDs Additional devices to extend the
● Can be expanded by adding an optiPoint functionality
key module and an optiPoint adapter. Expansion modules, adapters and acces-
sories (headsets, for example) to fle xibly
WLAN expansions customize the equipment to the require-
ments of the individual employee.
HiPath Wireless Standalone Access Point ● optiPoint key module with 16 additi-
onal function keys, LEDs and labelling
AP2630 with integrated antenna or
options
AP2640 with external antenna
● optiPoint acoustic adapter for con-
● 10/100 Mbit/s with PoE (802.3af) necting a headset with call pickup or
● Optional external power supply an external loudspeaker box and desk
● Wall-mounted installation in buildings microphone.
● optiPoint recorder adapter for con-
optiPoint WL2 professional S necting a recording device or a second
● WLAN telephone with SIP voice features earphone.
and menu guidance, large phone book ● optiPoint 150 S the entry-level device
and access to LDAP directory for VoIP
● Up to 4 hours of talk time ● SIP terminal adapter for Fax over IP
● 50 hours of stand-by time based on T.38 or additional analog
● 802.11 g/b standard telephones
● Security and encryption based on WEP and
WPA
Lightning fast – ●
●
Speed-dial (individual)
Microphone on/off
Technical data
3 steps to peer-to-peer ● Consultation hold/toggle
Station number identification/station Maximum configuration
telephony ●
number suppression ● Up to 2 S0 ports (network or internal
● Do not Disturb bus)
1. Connect BizIP AD 20 to ● Internal phonebook (200 entries sys- ● Up to 8 simultaneous Internet calls
● DSL modem, tem-wide) ● 16 peer-to-peer telephones on the LAN
● ISDN connection, ● Telephone locking ● 2 analog station on the Access Device
● LAN switch, ● Transfer (fax, entrance telephone or cordless)
● power supply. ● Connecting ● Up to 8 SIP devices
● Redial A maximum of 32 devices in total
2. Connect BizIP 410 telephones to ● Music on hold
Call waiting
● LAN switch and
●
Netzwork requirements
● power supply (unless "Power over Ether- Data communication ● LAN 10/100 Mbit/s with LAN switch, op-
net" is used). tional Power over Ethernet
● Enter user names. features ● DSL modem with LAN interface, recom-
● DHCP server mended bandwidth 32 kBit/s per call
3. Enter access data: ● Dynamic DNS with voice compression in acordance
Router for DSL with G.729 and 90 kbit/s for G.711
● Open the browser on any PC conected to ●
the LAN. ● Firewall, extended for VoIP ● ISDN connection, system or multi-device
● Enter Internet, VoIP and ISDN data. ● Quality of Service, Traffic Shaping interface
● Define call assignment to internal users.
Applications Important supported
HiPath BizIP – Features ● Computer Telephony Integration (CTI) standards
TAPI interface for making calls from PC, ● VoIP:
Voice features dialing from address databases and jour- RFC 3261 / 3262 / 3265 / 3515 (SIP),
nal lists of unanswered or missed calls. RFC 2327 (SDP), RFC 3550 (RTP),
● Intercept station
● Evaluation of call data RFC 2833 (DTMF/RTP)
● Call list
Windows-based program for recording ● Codecs:
● Call divert/call forwarding
and displaying call data per station. G.711, G.729, G.723
● Classes of service
● Data:
● DSS keys with LED and call pickup
● Three-party conference Wireless infrastructure RFC 2131 (DHCP), RFC 2663 (NAT),
RFC 2516 (PPPoE), RFC 2616 (HTTP),
● Group call The use of HiPath Wireless Standalone ac- RFC 959 (FTP)
● Call hold cess points (AP 2630/2640) guarantees ● QoS:
● Code für Internet/ISDN, fallback to ISDN full-coverage voice and data communica- IEEE 802.1P, RFC 1349 (TOS), RFC 2474/
tion with roaming and hand-over for WLAN 2475 (DiffServ)
telephones. Up to 5 WLAN access points
can be connected to the LAN to provide The latest technical information can be
coverage in buildings and outside areas. found at [Link]
[Link]/[Link]/HiPath_BizIP
Copyright © Siemens Enterprise
Communications GmbH & Co. KG 05/2007
Hofmannstr. 51, D-81359 Munich
Order no.: A31002-K1010-D100-1-7629
The information provided in this brochure contains
merely general descriptions or characteristics of per-
formance which in case of actual use do not always
apply as described or which may change as a result
of further development of the products. An obligati-
on to provide the respective characteristics shall only
exist if expressly agreed in the terms of contract.
Availability and technical specifications are subject
to change without notice. The trademarks used are
owned by Siemens Enterprise Communications
[Link]/enterprise GmbH & Co. KG or their respective owners.
