Scribd
Upload
64 views1 page

Key Topics Manual RCC Design

The document outlines key topics for Manual RCC Design, including structural design basics, material properties, and stress analysis. It covers the design of various structural elements such as beams, slabs, columns, and footings, along with reinforcement detailing and IS code provisions. Additionally, it addresses serviceability checks and basics of BOQ and estimation for concrete and steel quantities.

Uploaded by

Mahir Gundigara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views1 page

Key Topics Manual RCC Design

The document outlines key topics for Manual RCC Design, including structural design basics, material properties, and stress analysis. It covers the design of various structural elements such as beams, slabs, columns, and footings, along with reinforcement detailing and IS code provisions. Additionally, it addresses serviceability checks and basics of BOQ and estimation for concrete and steel quantities.

Uploaded by

Mahir Gundigara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Key Topics for Manual RCC Design

1. Basics of Structural Design


- Types of Structures (Load-bearing, RCC frame)
- Types of Loads (Dead, Live, Wind, Seismic) - IS 875 & IS 1893
- Load Combinations - IS 456
- Limit State vs. Working Stress Method

2. Material Properties & Stress Analysis


- Concrete & Steel Grades (M20, M25, Fe500, etc.)
- Stress-Strain Curve for Concrete & Steel
- Factor of Safety (FoS)
- Modular Ratio & Young's Modulus

3. Structural Elements Design


- Beams (Singly & Doubly Reinforced, Shear & Flexural Design)
- Slabs (One-Way & Two-Way Slabs)
- Columns (Axial, Uniaxial & Biaxial Bending)
- Footings (Isolated, Combined, Raft)
- Staircases (Waist Slab, Reinforcement)

4. Reinforcement Detailing & IS Code Provisions


- Minimum & Maximum Reinforcement Percentage
- Lap Length & Development Length
- Cover to Reinforcement
- Anchorage & Splicing of Bars

5. Serviceability Checks
- Deflection Limits (Span/Effective Depth)
- Crack Width Calculation

6. BOQ & Estimation Basics


- Concrete & Steel Quantity Calculation

You might also like