Project: DETAIL 03

Project no:
Author:

Project data
Project name DETAIL 03
Project number
Author
Description
Date 6/25/2024
Design code AISC 360-10

Material
Steel S304
Concrete 4000 psi

1 / 15
Project: DETAIL 03
Project no:
Author:

Project item DETAIL03

Design
Name DETAIL03
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2010

Beams and columns

β– γ- α- Offset Offset Offset
Forces
Name Cross-section Direction Pitch Rotation ex ey ez
in
[°] [°] [°] [mm] [mm] [mm]
1-
434 0.0 0.0 0.0 0.00 0.00 0.00 Node
SHHF50X50X3(BoxFl50x(50/50))

2 / 15
Project: DETAIL 03
Project no:
Author:

3 / 15
Project: DETAIL 03
Project no:
Author:

Cross-sections
Name Material
1-
S304
SHHF50X50X3(BoxFl50x(50/50))

Cross-sections
Name Material Drawing

1-
S304
SHHF50X50X3(BoxFl50x(50/50))

Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
12 A325M 12 A325M 12.00 830.0 113.00

4 / 15
Project: DETAIL 03
Project no:
Author:

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
ENV#01 434 -3.0 10.0 2.4 0.0 -1.5 0.0
ENV#02 434 3.0 10.0 2.4 0.0 -1.5 0.0

Foundation block
Item Value Unit
CB 1
Dimensions 225.00 x 240.00 mm
Depth 250.00 mm
Anchor 12 A325M
Anchoring length 100.00 mm
Shear force transfer Anchors

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.4 < 5.0% OK
Anchors 49.0 < 100% OK
Welds 75.8 < 100% OK
Concrete block 21.4 < 100% OK
Buckling 34.64

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
434-tfl 1 205.0 3.00 ENV#01 184.9 0.2 0.0 OK
434-bfl 1 205.0 3.00 ENV#02 185.2 0.4 0.0 OK
434-w 1 205.0 3.00 ENV#01 184.8 0.2 0.0 OK
434-w 2 205.0 3.00 ENV#02 185.0 0.3 0.0 OK
BP1 205.0 10.00 ENV#02 185.4 0.4 0.0 OK
RIB1 205.0 6.00 ENV#02 177.4 0.0 0.0 OK
RIB2a 205.0 4.00 ENV#01 151.8 0.0 0.0 OK
RIB2b 205.0 4.00 ENV#02 145.2 0.0 0.0 OK
RIB3a 205.0 4.00 ENV#02 100.1 0.0 0.0 OK
RIB3b 205.0 4.00 ENV#02 145.9 0.0 0.0 OK

Design data
fy εlim
Material
[MPa] [%]
S304 205.0 5.0

5 / 15
 Project: DETAIL 03
Project no:
Author:

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

Strain check, ENV#02

6 / 15
 Project: DETAIL 03
Project no:
Author:

Equivalent stress, ENV#02

Anchors
Nf V Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [%] [%] [%]
A1 ENV#01 2.8 3.7 5.7 13.6 4.4 OK

A2 ENV#02 0.0 3.5 0.0 12.9 3.3 OK

A3 ENV#02 24.0 1.8 49.0 6.7 31.6 OK

A4 ENV#02 0.0 1.5 0.0 5.7 0.8 OK

Design data
ϕNsa ϕVsa
[kN] [kN]
49.0 27.3

Symbol explanation
Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

7 / 15
 Project: DETAIL 03
Project no:
Author:

Detailed result for A3

Anchor tensile resistance (ACI 318-14 – 17.4.1)

ϕNsa = ϕ ⋅ Ase,N ⋅ futa =

​ ​ ​
49.0 kN ≥ Nf = ​
24.0 kN

Where:
ϕ = 0.70 – resistance factor

Ase,N = 84.30 mm2 – tensile stress area

​

futa = 830.0 MPa

​
– specified tensile strength of anchor steel:

futa = min(860 MPa, 1.9 ⋅ fya , fu ) , where:

​ ​ ​

fya = 660.0 MPa – specified yield strength of anchor steel

​

fu = 830.0 MPa – specified ultimate strength of anchor steel

​

Shear resistance (ACI 318-14 – 17.5.1)

ϕVsa = ϕ ⋅ 0.6 ⋅ Ase,V ⋅ futa =

​ ​ ​
27.3 kN ≥ V = 1.8 kN

Where:
ϕ = 0.65 – resistance factor
Ase,V = 84.30 mm2 – tensile stress area
​

futa = 830.0 MPa

​ – specified tensile strength of anchor steel:

futa = min(860 MPa, 1.9 ⋅ fya , fu ) , where:

​ ​ ​

fya = 660.0 MPa – specified yield strength of anchor steel

​

fu = 830.0 MPa – specified ultimate strength of anchor steel

​

Interaction of tensile and shear forces (ACI 318-14 – R17.6)

Utt 5/3 + Uts 5/3 =

​ ​ 0.32 ≤ 1.0

Where:
Utt = 0.49 – maximum ratio of factored tensile force and tensile resistance determined from all appropriate failure
​

modes
Uts = 0.07 – maximum ratio of factored shear force and shear resistance determined from all appropriate failure
​

modes

Supplementary reinforcement (ACI 318-14 – 17.4.2.9; ACI 318-14 – 17.5.2.9)

Supplementary reinforcement should resist force of 29.0 kN in tension and 10.3 kN in shear.

8 / 15
Project: DETAIL 03
Project no:
Author:

Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
BP1 434-tfl 1 E70xx ◢2.12 ◢3.00 49.75 9.95 ENV#02 4.5 6.0 75.0 OK
BP1 434-bfl 1 E70xx ◢2.12 ◢3.00 49.75 9.95 ENV#02 4.1 6.6 61.6 OK
BP1 434-w 1 E70xx ◢2.12 ◢3.00 43.80 10.95 ENV#02 3.0 7.0 43.7 OK
BP1 434-w 2 E70xx ◢2.12 ◢3.00 43.80 10.95 ENV#02 5.7 7.6 75.2 OK
BP1 RIB1 E70xx ◢2.12◣ ◢3.00◣ 118.80 9.90 ENV#02 4.5 6.0 75.3 OK
E70xx ◢2.12◣ ◢3.00◣ 119.40 9.95 ENV#02 4.5 6.4 70.1 OK
434-w 2 RIB1 E70xx ◢2.12◣ ◢3.00◣ 79.60 9.95 ENV#02 3.4 5.6 60.7 OK
E70xx ◢2.12◣ ◢3.00◣ 79.60 9.95 ENV#02 2.0 6.1 33.5 OK
BP1 RIB2a E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#01 3.5 6.1 58.6 OK
E70xx ◢2.12◣ ◢3.00◣ 39.60 9.90 ENV#02 2.3 4.8 49.0 OK
434-tfl 1 RIB2a E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#01 2.7 5.6 48.9 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#01 3.6 5.9 60.6 OK
BP1 RIB2b E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 3.8 6.0 64.0 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#01 2.8 6.6 42.2 OK
434-tfl 1 RIB2b E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#01 4.2 5.5 75.8 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 4.4 5.8 75.8 OK
BP1 RIB3a E70xx ◢2.12◣ ◢3.00◣ 39.60 9.90 ENV#02 1.9 5.4 35.5 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 1.9 5.9 32.0 OK
434-bfl 1 RIB3a E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 1.3 6.0 22.2 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 1.0 6.6 15.8 OK
BP1 RIB3b E70xx ◢2.12◣ ◢3.00◣ 39.60 9.90 ENV#02 2.4 4.8 50.9 OK
E70xx ◢2.12◣ ◢3.00◣ 39.60 9.90 ENV#02 3.8 5.1 75.1 OK
434-bfl 1 RIB3b E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 4.2 5.6 75.2 OK
E70xx ◢2.12◣ ◢3.00◣ 39.80 9.95 ENV#02 4.2 5.5 75.5 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

9 / 15
 Project: DETAIL 03
Project no:
Author:

Detailed result for 434-tfl 1 / RIB2b

Weld resistance check (AISC 360-10: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
5.8 kN ≥ Fn =
​
4.4 kN

Where:
Fnw = 363.3 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 39.6° – angle of loading measured from the weld longitudinal axis

Awe = 21.11 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Concrete block
A1 A2 σ Ut
Item Loads Status
[mm2] [mm2] [MPa] [%]
CB 1 ENV#02 8360.45 8360.45 3.3 21.4 OK

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Detailed result for CB 1

Concrete block compressive resistance check (AISC 360-10 Section J8)

ϕc fp,max =
​ ​
15.2 MPa ≥ σ= 3.3 MPa

Where:
fp,max = 23.4 MPa – concrete block design bearing strength:
​

fp,max = 0.85 ⋅ fc′ ⋅

​ ​
A2
A1
​

​
​ ​ ≤ 1.7 ⋅ fc′ , where:
​

fc′
= 27.6 MPa – concrete compressive strength
​

A1 = 8360.45 mm2 – base plate area in contact with concrete surface

​

A2 = 8360.45 mm2 – concrete supporting surface

​

ϕc = 0.65 – resistance factor for concrete

​

10 / 15
Project: DETAIL 03
Project no:
Author:

Buckling
Factor
Loads Shape
[-]
ENV#01 1 34.64
2 35.37
3 53.79
4 58.85
5 68.16
6 73.53
ENV#02 1 37.05
2 37.83
3 57.53
4 63.19
5 74.74
6 81.43

Bill of material

Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]

Fillet: a = 2.12 94.0

BP1 P10.00x175.0-140.0 (S304) 1 12 A325M 4
Fillet: a = 2.12 94.0

RIB1 P6.00x120.0-80.0 (S304) 1 Double fillet: a = 2.12 200.0

RIB2 P4.00x40.0-40.0 (S304) 2 Double fillet: a = 2.12 160.0

RIB3 P4.00x40.0-40.0 (S304) 2 Double fillet: a = 2.12 160.0

11 / 15
 Project: DETAIL 03
Project no:
Author:

Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Fillet E70xx 2.12 3.00 94.0
Fillet E70xx 2.12 3.00 94.0
Double fillet E70xx 2.12 3.00 520.0

Anchors
Length Drill length
Name Count
[mm] [mm]
12 A325M 110.00 100.00 4

Drawing

BP1

P10.00x140.00-175.00 (S304)

12 / 15
 Project: DETAIL 03
Project no:
Author:

RIB1

P6.00x80.00-120.00 (S304)

13 / 15
 Project: DETAIL 03
Project no:
Author:

RIB2

P4.00x40.00-40.00 (S304)

14 / 15
 Project: DETAIL 03
Project no:
Author:

RIB3

P4.00x40.00-40.00 (S304)

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-10 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-10 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-10 – J.3.4
Concrete breakout resistance check None
Base metal capacity check at weld fusion
No AISC 360-10: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints

15 / 15