AR54.10-P-0007ES Remove/install additional battery 31.01.
2018
Model 212
with code B03 (ECO start/stop function)
Model 212
with code ME04 (Mild hybrid drive)
Model 218
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip protector)
P54.15-3334-09
Shown on model 212.0
1 Luggage compartment floor 5 Cover 9 Nut
covering
2 Spare wheel well paneling 6 Positive line 10 Bow
3 Screw 7 Screw G1/13 ECO start/stop function additional
battery
4 Ground cable 8 Vent hose
© Mercedes-Benz AG, 11/22/19, X/11/19, ar54.10-p-0007es, Remove/install additional battery Page 1 of 3
Model 212 with code B03 (ECO start/stop function) Model 212 with code ME04 (Mild hybrid drive) Model 218 with code B03 (ECO start/stop function) except code 4U7 (Start/stop voltage dip ...
Shown on model 212.035
3 Screw
4 Ground cable
6 Positive line
7 Screw
8 Vent hose
9 Nut
10 Bow
G1/13 ECO start/stop function additional
battery
P54.10-4731-06
Warning Risk of injury caused by fingers being No parts of the body or limbs should be within AS00.00-Z-0011-01A
jammed or pinched when removing, installing the operating area when the components are
or aligning hoods, doors, trunk lid/rear-end moving.
door or sliding roof.
Danger Risk of explosion from explosive gas. Risk No fires, sparks, open flames or smoking. AS54.10-Z-0001-01A
of poisoning and caustic burns from Wear acid-resistant gloves, clothing and
swallowing battery electrolyte. Risk of injury glasses. Only pour battery acid into suitable
through burns to skin and eyes from battery and appropriately marked containers.
acid or when handling damaged lead-acid
batteries
Topical note Notes on battery AH54.10-P-0001-01A
Notes on HANDS-FREE ACCESS AH80.61-P-0001-01A
Notes on AGM battery AH54.10-P-0002-01A
Remove/install
1 Switch off all electrical consumers
All electrical consumers must be switched off.
Otherwise, they may be damaged when the
ground line (4) is connected/disconnected.
2 Switch off ignition and store transmitter key
outside of transmission range (min. 2 m)
3.1 Open luggage compartment floor cover (1) Model 212.0 (except 212.035), 212.1
with code B03 (ECO start/stop function)
Model 212.0/1
with code ME04 (Mild hybrid drive)
Model 218.3
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)
3.2 Open rear cargo area floor Model 212.2
with code B03 (ECO start/stop function)
Model 212.2
with code ME04 (Mild hybrid drive)
Model 218.9
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)
3.3 Remove side paneling in left side of luggage Model 212.035
compartment with code B03 (ECO start/stop function)
AR68.30-P-4600EW
4 Remove vehicle tool kit holder Model 212.0
with code B03 (ECO start/stop function)
except code 669 (Spare tire on steel rim)
except code 690 (Collapsible spare wheel)
Model 212.0
with code ME04 (Mild hybrid drive)
except code 669 (Spare tire on steel rim)
except code 690 (Collapsible spare wheel)
© Mercedes-Benz AG, 11/22/19, X/11/19, ar54.10-p-0007es, Remove/install additional battery Page 2 of 3
Model 212 with code B03 (ECO start/stop function) Model 212 with code ME04 (Mild hybrid drive) Model 218 with code B03 (ECO start/stop function) except code 4U7 (Start/stop voltage dip ...
5.1 Detach spare wheel well paneling (2) far Model 212.0 (except 212.035), 212.1
enough to gain access to the additional battery with code B03 (ECO start/stop function)
for the ECO start/stop function (G1/13) Model 212
with code ME04 (Mild hybrid drive)
Model 218.3
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)
except code 669 (Spare tire on steel rim)
except code 690 (Collapsible spare wheel)
5.2 Remove covering for additional battery for Model 212.2
ECO start/stop function (G1/13) with code B03 (ECO start/stop function)
Model 212.2
with code ME04 (Mild hybrid drive)
Model 218.9
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)
6 Remove bolt (3) and detach ground line (4) Model 212 *BA54.10-P-1004-01F
from ECO start/stop function additional battery with code B03 (ECO start/stop function)
(G1/13) Model 212
with code ME04 (Mild hybrid drive)
Model 218
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)Screw/bolt, battery cable to battery
terminal on additional battery
7 Remove cover (5) from positive line (6)
8 Use a diode test lamp to check the on-board If the diode test lamp lights up, the on-board
electrical system for voltage between the electrical system is still active because of a
positive line (6) and a suitable ground point defect in the electrical system. In this case
Disconnect ground line from on-board
electrical system battery.
AR54.10-P-0003EW
Installation: Clear defect on electrical
system.
9 Remove bolt (7) and detach positive line (6) Model 212 *BA54.10-P-1004-01F
with code B03 (ECO start/stop function)
Model 212
with code ME04 (Mild hybrid drive)
Model 218
with code B03 (ECO start/stop function)
except code 4U7 (Start/stop voltage dip
protector)Screw/bolt, battery cable to battery
terminal on additional battery
10 Unscrew nut (9) of bracket (10)
11 Swivel bracket (10) upwards
12 Detach vent hose (8) from additional battery Installation:
for ECO start/stop function (G1/13) Check bleed hose (8) is correctly seated on
additional battery for ECO start/stop function
(G1/13).
Otherwise, emitted battery vapor may damage
surrounding components.
13 Remove additional battery for ECO start/stop
function (G1/13) from the battery carrier
14 Install in the reverse order
Battery
Number Designation Model 212 Model 218
BA54.10-P-1004-01F Screw/bolt, battery cable to battery terminal on additional battery Nm 5 5
© Mercedes-Benz AG, 11/22/19, X/11/19, ar54.10-p-0007es, Remove/install additional battery Page 3 of 3
Model 212 with code B03 (ECO start/stop function) Model 212 with code ME04 (Mild hybrid drive) Model 218 with code B03 (ECO start/stop function) except code 4U7 (Start/stop voltage dip ...
