Scribd
Upload
20 views14 pages

Braket

The document outlines the SUHN project, detailing design specifications, materials used (steel and aluminum), and structural analysis results according to AISC 360-16 standards. It includes load effects, checks on various components such as plates, bolts, and anchors, with specific attention to their utilization and status. Notably, the analysis indicates that while most components are within acceptable limits, the anchors are flagged as 'Not OK' due to exceeding utilization thresholds.

Uploaded by

engineerstructural62
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views14 pages

Braket

The document outlines the SUHN project, detailing design specifications, materials used (steel and aluminum), and structural analysis results according to AISC 360-16 standards. It includes load effects, checks on various components such as plates, bolts, and anchors, with specific attention to their utilization and status. Notably, the analysis indicates that while most components are within acceptable limits, the anchors are flagged as 'Not OK' due to exceeding utilization thresholds.

Uploaded by

engineerstructural62
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project: SUHN

Project no:
Author:

Project data
Project name SUHN
Project number
Author
Description
Date 10/20/2024
Design code AISC 360-16

Material
Steel aluminium
Concrete 4000 psi

1 / 14
Project: SUHN
Project no:
Author:

Project item CON1

Design
Name CON1
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns


β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
M2 1 - RHS150x50 0.0 90.0 90.0 -165 11 -35 Node

Cross-sections
Name Material
1 - RHS150x50 aluminium

Anchors / Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
M10 M10 10 1040.0 115

2 / 14
Project: SUHN
Project no:
Author:

Load effects (equilibrium not required)


N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 M2 -8.0 2.0 0.0 0.0 0.0 0.0
LE3 M2 0.0 0.0 -2.0 0.0 0.0 0.0

Foundation block
Item Value Unit
CB 1
Dimensions 100 x 115 mm
Depth 600 mm
Anchor M10
Anchoring length 90 mm
Shear force transfer Anchors
CB 2
Dimensions 120 x 100 mm
Depth 600 mm
Anchor M10
Anchoring length 50 mm
Shear force transfer Anchors

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 1.6 < 5.0% OK
Bolts 74.1 < 100% OK
Anchors 161.7 > 100% Not OK!
Welds 4.1 < 100% OK
Concrete block 31.0 < 100% OK
Buckling Not calculated

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
M2 172.0 2.5 LE1 155.9 1.6 0.0 OK
SP1 172.0 6.0 LE1 150.5 0.0 4.4 OK
SP2 172.0 6.0 LE1 100.2 0.0 0.0 OK
SP3 172.0 8.0 LE1 57.8 0.0 0.0 OK
SP4 172.0 8.0 LE1 44.2 0.0 8.2 OK
SP7 172.0 6.0 LE1 35.2 0.0 8.2 OK
SP9 172.0 6.0 LE3 46.6 0.0 0.0 OK

3 / 14
Project: SUHN
Project no:
Author:

Design data
fy εlim
Material
[MPa] [%]
aluminium 172.0 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

Overall check, LE1

4 / 14
Project: SUHN
Project no:
Author:

Strain check, LE1

Equivalent stress, LE1

5 / 14
Project: SUHN
Project no:
Author:

Bolts
Ft V ϕRn,bearing Utt Uts Utts
Shape Item Grade Loads Status
[kN] [kN] [kN] [%] [%] [%]

B1 M10 - 1 LE1 1.0 6.8 9.3 1.4 74.1 - OK

B7 M10 - 1 LE1 1.4 1.1 22.2 2.1 4.8 - OK

Design data

ϕRn,tension ϕRn,shear
Grade
[kN] [kN]
M10 - 1 67.3 40.5
Bolts: B1 There is a gap between connected plates. Bolts should be designed as pins. Provided resistances of bolts in shear and
plates in bearing may be incorrect

Symbol explanation
Ft Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕRn,bearing Bolt bearing resistance
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕRn,tension Bolt tension resistance AISC 360-16 J3.6
ϕRn,shear Bolt shear resistance AISC 360-16 – J3.8

Anchors
Nf V ϕNcbg ϕVcbg ϕVcp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [kN] [kN] [%] [%] [%]

A3 LE3 4.2 1.7 4.7 1.9 4.4 88.7 87.3 161.7 Not OK!

A5 LE3 1.6 0.4 7.1 2.7 6.6 22.3 14.0 11.9 OK

6 / 14
Project: SUHN
Project no:
Author:

Design data

ϕNsa ϕVsa
Grade
[kN] [kN]
M10 - 2 51.8 28.8
Bolts: B1 There is a gap between connected plates. Bolts should be designed as pins. Provided resistances of bolts in shear and
plates in bearing may be incorrect

Symbol explanation
Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕNcbg Concrete breakout strength in tension – ACI 318-14 – 17.4.2
ϕVcbg Concrete breakout strength in shear – ACI 318-14 – 17.5.2
ϕVcp Concrete pryout strength in shear – ACI 318-14 – 17.5.3
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
SP3 SP1 E70xx - - 73 - - - - - OK
SP3 SP2 E70xx - - 73 - - - - - OK
SP4 SP3 E70xx - - 100 - - - - - OK
SP4 SP1 E70xx - - 57 - - - - - OK
SP4 SP2 E70xx - - 57 - - - - - OK
SP9 SP7 E70xx ◢2.8 ◢4.0 99 10 LE3 0.4 9.0 4.1 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Concrete block
A1 A2 σ Ut
Item Loads Status
[mm2] [mm2] [MPa] [%]
CB 1 LE1 3164 1689 3.5 31.0 OK
CB 2 LE1 4656 2603 0.2 2.2 OK

7 / 14
Project: SUHN
Project no:
Author:

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Buckling
Buckling analysis was not calculated.

Bill of material

Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]

SP1 P6.0x165.0-130.0 (aluminium) 1 M10 1

SP2 P6.0x165.0-130.0 (aluminium) 1 M10 1

SP3 P8.0x100.0-115.0 (aluminium) 1 M10 1

SP4 P8.0x100.0-59.0 (aluminium) 1 M10 1

SP7 P6.0x100.0-50.0 (aluminium) 1 M10 1

SP9 P6.0x120.0-100.0 (aluminium) 1 M10 1

8 / 14
Project: SUHN
Project no:
Author:

Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Butt E70xx - - 260.0
Butt E70xx - - 100.0
Fillet E70xx 2.8 4.0 99.0

Anchors
Length Drill length
Name Count
[mm] [mm]
M10 98 90 1
M10 56 50 1

Bolts
Grip length
Name Count
[mm]
M10 66 1
M10 14 1

Drawing

SP1

P6.0x130-165 (aluminium)

9 / 14
Project: SUHN
Project no:
Author:

SP2

P6.0x130-165 (aluminium)

10 / 14
Project: SUHN
Project no:
Author:

SP3

P8.0x115-100 (aluminium)

11 / 14
Project: SUHN
Project no:
Author:

SP4

P8.0x59-100 (aluminium)

SP7

P6.0x50-100 (aluminium)

12 / 14
Project: SUHN
Project no:
Author:

SP9

P6.0x100-120 (aluminium)

M2, RHS150x50 - Web 2:

13 / 14
Project: SUHN
Project no:
Author:

M2, RHS150x50 - Web 4:

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion
No AISC 360-16: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints

14 / 14

You might also like