Intel 600 series BIOS

USER GUIDE
Motherboard

 1
 Contents
UEFI BIOS................................................................................................................ 3
UEFI advantages...................................................................................................... 3
Incompatible UEFI cases......................................................................................... 3
How to find the BIOS version?........................................................................... 3
BIOS Setup.............................................................................................................. 4
Entering BIOS Setup................................................................................................ 4
Function key....................................................................................................... 4
BIOS Setting Mode................................................................................................... 5
EZ Mode................................................................................................................... 5
Advanced Mode ....................................................................................................... 9
SETTINGS Menu.................................................................................................... 10
System Status.................................................................................................. 10
Advanced.......................................................................................................... 11
Boot.................................................................................................................. 24
Security............................................................................................................ 26
Save & Exit....................................................................................................... 30
OC Menu................................................................................................................ 31
M-FLASH Menu..................................................................................................... 61
OC PROFILE Menu................................................................................................. 62
HARDWARE MONITOR Menu................................................................................ 63
Adjusting fans ................................................................................................. 64
Resetting BIOS....................................................................................................... 65
Updating BIOS........................................................................................................ 65
Updating BIOS with M-FLASH ........................................................................ 65
Updating the BIOS with MSI Center................................................................. 66
Updating BIOS with Flash BIOS Button........................................................... 66
Notices.................................................................................................................. 67
Copyright................................................................................................................ 67
Revision History..................................................................................................... 67

2 Contents
UEFI BIOS
MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface)
architecture. UEFI has many new functions and advantages that traditional BIOS
cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI
BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s
capabilities. However, it still has a CSM (Compatibility Support Module) mode to be
compatible with older devices. That allows you to replace legacy devices with UEFI
compatible devices during the transition.

⚠⚠Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.

UEFI advantages
∙∙ Fast booting - UEFI can directly boot the operating system and save the BIOS self-
test process. And also eliminates the time to switch to CSM mode during POST.
∙∙ Supports for hard drive partitions larger than 2 TB.
∙∙ Supports more than 4 primary partitions with a GUID Partition Table (GPT).
∙∙ Supports unlimited number of partitions.
∙∙ Supports full capabilities of new devices - new devices may not provide backward
compatibility.
∙∙ Supports secure startup - UEFI can check the validity of the operating system to
ensure that no malware tampers with the startup process.

Incompatible UEFI cases

∙∙ 32-bit Windows operating system - this motherboard supports only Windows 10/
Windows 11 64-bit operating system.
∙∙ Older graphics card - the system will detect your graphics card. When display a
warning message There is no GOP (Graphics Output protocol) support detected in this
graphics card.

⚠⚠Important
We recommend that you to replace with a GOP/UEFI compatible graphics card or
using integrated graphics from CPU for having normal function.

How to find the BIOS version?

After entering the BIOS, find the BIOS version at the top of the screen.

MB:
CPU:
Memory Size:
BIOS Ver:
BIOS Buide Date:

UEFI BIOS 3
 BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.

⚠⚠Important
∙∙ The BIOS setup screens, options and settings in this manual are for reference only
and may vary from the motherboard you purchased. Please refer to the actual BIOS
version of your system for detailed screens, settings and options.
∙∙ BIOS items are continuously updated for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be for reference
only. You could also refer to the HELP information panel for the BIOS item description.
∙∙ The BIOS options and settings for each motherboard may vary slightly with the BIOS
version, please refer to the actual BIOS of your system for settings and options.

Entering BIOS Setup

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.

Function key
F1: General Help list
F2: Add/ Remove a favorite item
F3: Enter Favorites menu
F4: Enter CPU Specifications menu
F5: Enter Memory-Z menu
F6: Load optimized defaults
F7: Switch between Advanced mode and EZ mode
F8: Load Overclocking Profile
F9: Save Overclocking Profile
F10: Save Change and Reset*
F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
Ctrl+F: Enter Search page
* When you press F10, a confirmation window appears and it provides the modification
information. Select between Yes or No to confirm your choice.

4 BIOS Setup
BIOS Setting Mode
It provides two modes for you to configure BIOS: EZ mode and Advanced mode. Please
press F7 to switch between these two modes.

EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.

Smart Button
Screenshot
XMP Profile Setup Mode switch BIOS Search
Language

System
information

GAME BOOST/
CREATOR Boot device
GENIE priority bar

Component
Information

M-Flash
Favorites Function
buttons
Hardware
Monitor

∙∙ GAME BOOST - click on it to toggle the GAME BOOST for overclocking. This function
is only available when both of the motherboard and CPU are supporting this function.

⚠⚠Important
Please don’t make any changes in OC menu and don’t load defaults to keep the
optimal performance and system stability after activating the GAME BOOST function.
∙∙ CREATOR GENIE - click on it to toggle the CREATOR GENIE for performance
optimization.

⚠⚠Important
Please don’t make any changes in OC menu and don’t load defaults to keep the
optimal performance and system stability after activating the CREATOR GENIE
function.
∙∙ XMP Profile - allows you to select the XMP profile for memory to overclock. This
function is only available when the system, memory and CPU are supporting this
function.

BIOS Setup 5
 ∙∙ Setup Mode switch - press this tab or the F7 key to switch between Advanced mode
and EZ mode.
∙∙ Screenshot - click on this tab or the F12 key to take a screenshot and save it to USB
flash drive (FAT/ FAT32 format only).
∙∙ BIOS Search - click on this tab or the Ctrl+F keys to enter the search page. It allows
you to search by BIOS item name. Move the mouse over a blank space and right click
the mouse to exit the search page.

⚠⚠Important
In search page, only the F6, F10 and F12 function keys are available.
∙∙ Smart Button - it provides 4 function modes to be achieved by reset button.
▪▪Reset - press the reset button to reset the system.
▪▪Mystic Light on/ off - press the reset button to turn on/ off all the onboard LEDs.

⚠⚠Important
The Mystic Light on/ off function mode is unavailable when the LED_SW1 (EZ LED
Control) switch turns OFF.
▪▪Safe Boot - click the button and start the system simultaneously to boot in Safe
Boot mode. The system will boot with default and lower the PCIe (from CPU) mode.
▪▪Turbo Fan - press the reset button for all fans to operate full speed or default
speeds.
▪▪Configuring Smart Button
1. Click on Smart Button and select a function mode.
2. Press F10 to save the change and select Yes to restart the system.

6 BIOS Setup
∙∙ Language - allows you to select language of BIOS setup.
∙∙ System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
type, memory size, CPU/ DDR voltage, BIOS version and build date.
∙∙ Boot device priority bar - you can move the device icons to change the boot priority.
The boot priority from high to low is left to right.
∙∙ Component Information - click on the CPU, Memory, Storage, Fan Info and Help
buttons to show the information of the connected device.
∙∙ Function buttons - enable or disable the BIOS functions by clicking on these
buttons. The button shows ON after enableing the function .
▪▪CPU Fan Fail Warning Control - enables or disables to show the CPU fan fail
warning message on the POST.
▪▪VMD (RAID) - enables or disables the Intel VMD for RAID and Optane functions.
▪▪fTPM 2.0 - enables or disables the firmware TPM control.
▪▪Thunderbolt Control - enables or disables the thunderbolt I/O device support.
▪▪ErP Ready - enables or disables the system power consumption according to
ErP regulation.
▪▪Debug Code LED Control - enables or disables the debug code LED.
▪▪EZ LED Control - turns on or turns off all the LEDs of motherboard.
▪▪HD Audio Controller - enables or disable the HD audio controller.
∙∙ M-Flash - click on this button to enter the M-Flash menu that provides the way to
update BIOS with a USB flash drive.
∙∙ Hardware Monitor - click on this button to enter the Hardware Monitor menu that
allows you to manually control the fan speed by percentage.
∙∙ Favorites - click on this button or press the F3 key to show the Favorites window.
It provides 5 menus for you to create personal BIOS menu where you can save and
access favorite/ frequently-used BIOS setting items.

BIOS Setup 7
 ▪▪To add a BIOS item to a favorite menu
1. Select a BIOS item not only on BIOS menu but also on search page.
2. Right-click or press F2 key.
3. Choose a favorite page and click on OK.

▪▪To delete a BIOS item from favorite menu

1. Select a BIOS item on favorite menu.
2. Right-click or press F2 key.
3. Choose Delete and click on OK.

8 BIOS Setup
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.

BIOS menu BIOS menu

selection selection

Menu display

∙∙ BIOS menu selection - the following options are available:

▪▪SETTINGS - allows you to specify the parameters for chipset and boot devices.
▪▪OC - allows you to adjust the frequency and voltage. Increasing the frequency
may get better performance.
▪▪M-FLASH - provides the way to update BIOS with a USB flash drive.
▪▪OC PROFILE - allows you to manage overclocking profiles.
▪▪HARDWARE MONITOR - allows you to set the speeds of fans and monitor
voltages of system.
▪▪BETA RUNNER - provides the beta functions or features for the user who craves
the new experience. However, we welcome and expect you to give us some more
feedback on user experience. That will be helpful in improving the functions.
▪▪SECURITY - allows you to set the administrator password and the user password
for system security.
∙∙ Menu display - provides BIOS setting items and information to be configured.

BIOS Setup 9
 SETTINGS Menu
This menu allows you to specify the parameters for system, chipset and boot devices.

System Status
The System Status sub-menu allows you to set the system clock and view system
information.

▶▶System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month> The month from Jan. through Dec.
<date> The date from 1 to 31 can be keyed by numeric function keys.
<year> The year can be adjusted by users.

▶▶System Time
Sets the system time. Use tab key to switch between time elements. The time format
is <hour> <minute> <second>.

10 BIOS Setup
▶▶SATA PortX/ M2_X/ U2_X
Shows the information of connected SATA/ M.2/ U.2 devices.

⚠⚠Important
If the connected SATA/ M.2/ U.2 device is not displayed, turn off computer and
re-check SATA/ M.2/ U.2 cable and power cable connections of the device and
motherboard.

▶▶System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).

▶▶DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).

Advanced
The Advanced sub-menu allows you to adjust and set the parameters and behaviors of
PCIe, ACPI, integrated peripherals, integrated graphics, USB, power management and
Windows.

BIOS Setup 11
 ▶▶PCIe/PCI Sub-system Settings
Sets PCI, PCI express interface protocol and latency timer. Press Enter to enter the
sub-menu.

▶▶M.2_1 - Max Link Speed

Sets PCI Express protocol for M2_1slot to match different installed M.2 devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.
[Gen4] Enables PCIe Gen4 support only.

▶▶PCIE_E1 - Max Link Speed

Sets PCI Express protocol for PCI_E1 slot to match different installed PCIe devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.
[Gen4] Enables PCIe Gen4 support only.

▶▶PCIE_E2 - Max Link Speed

Sets PCI Express protocol for PCI_E2 slot to match different installed PCIe devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.
[Gen4] Enables PCIe Gen4 support only.

12 BIOS Setup
▶▶CPU PCIe Lanes Configuration
Sets CPU PCIe lanes for adapting multiple PCIe devices usages.

▶▶PCI Latency Timer

Sets latency timer for PCI interface device.

▶▶Above 4G memory/ Crypto Currency mining

Enable this item to allow more memory address configuration space (requires 64
bit OS) with another optimized setting for better device compatibility and it might
slightly affect the efficiency of PCIe-based devices.
[Enabled] Allows you to utilize more than 4x GPUs.
[Disabled] Disables this function.

▶▶Re-Size BAR Support

Enables or disables the Resize BAR (Base Address Register) support. It is only
available if the system supports 64-bit PCI/ PCIe decoding. If the system supports
64-bit PCI/ PCIe decoding, please enable this item for compatible PCIe devices.

▶▶PCIe/PCI ASPM Settings

Sets PCIe/ PCI ASPM (Active State Power Management) state for different installed
devices. Press Enter to enter the sub-menu.

▶▶PEG 0 ASPM
Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PEG 1 ASPM
Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PEG 2 ASPM
Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PEG 3 ASPM
Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 1 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 5 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 7 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 8 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 9 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

▶▶PCI Express Root Port 21 ASPM

Sets PCI Express ASPM (Active State Power Management) state for power saving.

BIOS Setup 13
 ▶▶ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press Enter to enter the sub-
menu.

▶▶Power LED
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.

▶▶CPU Over Temperature Alert

Enables or disables the CPU overheating alert sound and message when CPU
temperature is over 80 and 94 degrees centigrade.

▶▶Temperature Display On Debug Code

Selects a thermal detection point and then the detected temperature will display
on the debug code LED.

14 BIOS Setup
▶▶Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter to enter the sub-menu.

▶▶VGA Detection
Allows the system to detect if there is any discrete VGA card or integrated graphics
unit.

▶▶Onboard LAN Controller

Enables or disables the onboard LAN controller.

▶▶LAN Option ROM

Enables or disables the legacy network Boot Option ROM for detailed settings. This
item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.

▶▶Network Stack
Sets UEFI network stack for optimizing IPv4 / IPv6 function. This item is available
when Onboard LAN Controller is enabled.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.

▶▶Ipv4 PXE Support

When Enabled, the system UEFI network stack will support Ipv4 protocol. This item
will appear when Network Stack is Enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.

▶▶Ipv6 PXE Support

When Enabled, the system UEFI network stack will support Ipv6 protocol. This item
will appear when Network Stack is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.

BIOS Setup 15
 ▶▶Onboard CNVi Module Control
Enables or disables the functions (WiFi and Bluetooth) of the Intel CNVi module.

▶▶Onboard Wi-Fi/BT Module Control

Enables or disables the onboard WiFi and Bluetooth functions.

▶▶RAID Configuration (Intel VMD)

Enables or disables the RAID configuration. Press Enter to enter the sub-menu.

▶▶Enable RAID/Optane Function

Enables or disables Intel RAID & Optane functions.

▶▶Enable VMD Global Mapping

Enables or disables Intel VMD mapping. Intel VMD is an Intel® Xeon® Scalable
processor feature that enables direct control and management of NVMe SSDs
from the PCIe bus without additional hardware adapters.

▶▶RAID0
Enables or disables RAID0.

▶▶RAID1
Enables or disables RAID1.

▶▶RAID5
Enables or disables RAID5.

▶▶RAID10
Enables or disables RAID10.

▶▶Intel Rapid Recovery Technology

Enables or disables Intel Rapid Recovery Technology. Intel® Rapid Recover
Technology (Intel® RRT) is a feature of Intel® Rapid Storage Technology (Intel®
RST). It uses RAID 1 (mirroring) functionality to copy data from a designated
master drive to a designated recovery drive.

▶▶RRT volumes can span internal and eSATA drives

Enables or disabled the RRT volumes to span internal and eSATA drives.

▶▶Intel(R) Optane(TM) Memory

Enables or disabled the Intel Optane memory.

▶▶SATA1 Hot Plug

Enables or disabled the SATA1 port hot plug support.

▶▶SATA2 Hot Plug

Enables or disabled the SATA2 port hot plug support.

▶▶SATA3 Hot Plug

Enables or disabled the SATA3 port hot plug support.

▶▶SATA4 Hot Plug

Enables or disabled the SATA4 port hot plug support.

16 BIOS Setup
 ▶▶SATA5 Hot Plug
Enables or disabled the SATA5 port hot plug support.

▶▶SATA6 Hot Plug

Enables or disabled the SATA6 port hot plug support.

▶▶Onboard E-SATA Controller Mode

Sets the operation mode of the onbocrd E-SATA controller.

▶▶External SATA 6GB/s Controller Mode

Sets the operation mode of the external SATA controller.

▶▶HD Audio Controller

Enables or disables the onboard High Definition Audio controller.

▶▶Integrated Graphics Configuration

Adjusts integrated graphics settings for optimum system. Press Enter to enter the
sub-menu. This sub-menu is only available with the CPU integrate with IGP.

▶▶Initiate Graphic Adapter

Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.

▶▶Integrated Graphics Share Memory

Selects a fixed amount of system memory allocated to the onboard graphics. This
item will appear when an external graphics card be installed and the IGD Multi-
Monitor is enabled.

▶▶IGD Multi-Monitor
Enables or disables the multi-screen output from integrated graphics and external
graphics card. This item appears when Initiate Graphic Adapter set to PEG.
[Enabled] Enables multi-screen function for both integrated and external
graphics cards.
[Disabled] Disables this function.

BIOS Setup 17
 ▶▶Intel (R) Thunderbolt
Sets the thunderbolt device function. Press Enter to enter the sub-menu.

▶▶PCIE Tunneling over USB4

Enables or disables the PCI-E Tunnel protocol over USB4.

▶▶Discrete Thunderbolt(TM) Support

Enables or disables the thunderbolt device support.

▶▶Wake From Thunderbolt(TM) Device

Enables or disables the system wake up by thunderbolt device.

▶▶Discrete Thunderbolt(TM) Configuration

Sets the thunderbolt device configuration. Press Enter to enter the sub-menu.

▶▶Thunderbolt Boot Support

Enables or disables the system to boot from boot-able thunderbolt device.

▶▶GPIO3 Force Pwr

Sets GPIO3 to 1/0.

▶▶GPIO filter
Enables or disables GPIO filter. Enables GPIO filter to avoid electrical noise on
chipset GPIOs during hotplug of 12V USB devices.

▶▶DTBT Go2Sx Command

Enables or disables the DTBT to execute Go2Sx commands before the system
going to Sx states.

▶▶Windows 10 Thunderbolt support

Sets Windows 10 support level.
[Disabled] No OS native support.
[Enabled+RTD3]OS native support + RTD3.

18 BIOS Setup
▶▶DTBT Controller 0 Configuration
Sets the DTBT configuration. Press Enter to enter the sub-menu.

▶▶DTBT Controller 0
Enables or disables DTBT controller 0.

▶▶TBT Host Router

Enables or disables the host router based on ports available.

▶▶Extra Bus Reserved

Sets the extra bus for TBT ports.
[56] One port host.
[106] Two port host.

▶▶Reserved Memory
Sets reserved memory for this root bridge.

▶▶Memory Alignment
Sets the memory alignment.

▶▶Reserved PMemory
Sets reserved prefetchable memory for this root bridge.

▶▶PMemory Alignment
Sets prefetchable memory alignment.

▶▶Reserved I/O
Sets reserved I/O.

BIOS Setup 19
 ▶▶USB Configuration
Sets the onboard USB controller and device function. Press Enter to enter the sub-
menu.

▶▶XHCI Hand-off
Enables or disables XHCI hand-off support. Enables this item for the operating
system without XHCI hand-off feature.

▶▶Legacy USB Support

Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enable the legacy USB support.
[Enabled] Enables the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.

▶▶USB Port Control

Enables or disables the individual USB ports of the motherboard. Press Enter to
enter the sub-menu.

▶▶Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press Enter to
enter the sub-menu.

▶▶Serial (COM) Port 0 Configuration

Sets detailed configuration of serial(COM) port 0. Press Enter to enter the sub-
menu.

▶▶Serial (COM) Port 0

Enables or disables serial (COM) port 0.

▶▶Serial (COM) Port 0 Settings

Sets serial (COM) port 0. If set to Auto, BIOS will optimize the IRQ automatically
or you can set it manually.

▶▶Parallel (LPT) Port Configuration

Sets detailed configuration of parallel port (LPT). Press Enter to enter the sub-
menu.

20 BIOS Setup
 ▶▶Parallel (LPT) Port
Enables or disables parallel(LPT) port.

▶▶Parallel (LPT) Port Settings

Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically
or you can set it manually.

▶▶Device Mode
Selects an operating mode for parallel port.
[STD Printer Mode] Printer port mode
[SPP] Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard
Parallel Port mode.
[ECP] Extended Capability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel
Port-1.9/ 1.7 mode.

▶▶Power Management Setup

Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to
enter the sub-menu.

▶▶ErP Ready
Enables or disables the system power consumption according to ErP regulation.
[Enabled] Optimize the system power consumption according to ErP
regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe
devices.
[Disabled] Disables this function.

▶▶Restore after AC Power Loss

Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the last state.

BIOS Setup 21
 ▶▶System Power Fault Protection
Enables or disables the protection (shut down status) for system when detecting
abnormal voltage input.
[Enabled] Protect the system from unexpected power operation and remain
the shut down status.
[Disabled] Disables this function.

▶▶USB Standby Power at S4/S5

Enables or disables the standby power for all USB ports. This item will be available
when Resume By USB Device is disabled.

▶▶BIOS CSM/UEFI Mode

Select CSM (Compatibility Support Module) or UEFI mode to meet the system
requirement.
[CSM] For the non-UEFI driver add-on devices or non-UEFI mode OS.
[UEFI] For the UEFI driver add-on devices and UEFI mode OS.

▶▶Wake Up Event Setup

Sets system wake up behaviors for different sleep modes. Press Enter to enter the
sub-menu.

▶▶Wake Up Event By
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, set wake up events of these items.
[OS] The wake up events will be defined by OS.

▶▶Resume By RTC Alarm

Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.

▶▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm

Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/
second in these fields (using the + and - keys to select the date & time settings).

22 BIOS Setup
▶▶Resume By PCI/ PCI-E/ Networking Device
Enables or disables the wake up function of installed PCI/ PCI-E expansion cards,
integrated LAN controllers, onboard WiFi or USB devices which are supported by
third party integrated chips.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCI/ PCIe/ LAN/ WiFi device is
detected.
[Disabled] Disables this function.

▶▶Resume By Intel Onboard LAN

Enables or disables the system wake up by Onboard Intel LAN.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of Intel LAN device is detected.
[Disabled] Disables this function.

▶▶Resume By Intel Onboard LAN/CNVi

Enables or disables the system wake up by onboard Intel LAN/ CNVi wireless.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of Intel LAN/ CNVi device is detected.
[Disabled] Disables this function.

▶▶Resume By Intel CNVi

Enables or disables the system wake up by Intel CNVi wireless module.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of Intel CNVi device is detected.
[Disabled] Disables this function.

▶▶Resume by USB Device

Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity of
USB device is detected.
[Disabled] Disables this function.

▶▶Resume From S3/S4/S5 by PS/2 Mouse

Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled] Disables this function.

▶▶Resume From S3/S4/S5 by PS/2 Keyboard

Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.

▶▶Hot Key
Selects a combination of keys as a hot key to wake the system. This item appears
when the Resume From S3/S4/S5 by PS/2 Keyboard sets to Hot Key.

BIOS Setup 23
 ▶▶Secure Erase+
Enables or disables Secure Erase+ function. Secure Erase+ is the best way to
effectively wipe all data from a SSD. Please note that data of SSD will be erased after
enabling Secure Erase+.

▶▶M.2 XPANDER-Z GEN4 S Fan Control

You can set the LED color and fan duty percentage of the M.2 XPANDER-Z fan
manually.

▶▶Realtek PCIe GBE Family Controller

Shows driver information and configuration of the ethernet controller parameter. This
item will appear when Network Stack is enabled.

▶▶Intel ( R ) Ethernet Connection I219-V -(MAC

Shows driver information and configuration of the ethernet controller parameter. This
item will appear when Network Stack is enable.

Boot
Sets the sequence of system boot devices.

▶▶Full Screen Logo Display

Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.

24 BIOS Setup
▶▶GO2BIOS
Allows system to enter BIOS setup directly by pressing the Power button for 5 sec
upon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 5 seconds when the system is off (S5 state).
[Disabled] Disables this function.

▶▶Bootup NumLock State

Select the keyboard NumLock state while system is booting.

▶▶Info Block effect

Sets to apply the sliding effect when entering the Graphical Setup Engine (GSE). To
apply the sliding effect, please set to Unlock.
[Unlock] Sliding effect.
[Lock] Fix the Help information block on the screen.

▶▶POST Beep
Enables or disables the beep sound during system POST.

▶▶MSI Fast Boot

MSI Fast Boot is the fastest way to boot the system. When enabled, the USB, PS2 and
SATA devices will not be detected while booting.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And the
following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.

⚠⚠Important
When MSI Fast Boot is enabled, you are not allowed to enter BIOS setup until you to
disable MSI Fast Boot in MSI Center.

▶▶Fast Boot
Enables or disables the fast boot feature for Windows 10 fast boot feature. This item
will only be available when MSI Fast Boot is disabled.

▶▶FIXED BOOT ORDER Priorities

Sets device priority for system boot.

▶▶Boot Option Priorities

These items are used to prioritize the installed boot devices.

BIOS Setup 25
 Security
Use this menu to set the administrator password and the user password for system
security. This menu also allows you to set the TPM (Trusted Platform Module)
function.

▶▶Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password,
the state of this item will show Installed.

▶▶User Password
Sets User Password for system security. User has limited rights to change the BIOS
items with user password. This item will be available when administrator password is
set. After setting the user password, the state of this item will show Installed.

▶▶Password Check
Selects a condition that will request the password.
[Setup] A password will be requested for entering the BIOS Setup.
[Boot] A password will be requested for booting the system.

▶▶Password Clear
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept.

⚠⚠Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press Enter. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press Esc key to abort the selection.
To clear a set password, press Enter when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.

26 BIOS Setup
▶▶U-Key
Enables or disables the USB flash drive as a key.

▶▶Make U-Key at
Specify a USB flash drive as a key.

▶▶Trusted Computing
Sets TPM (Trusted Platform Module) function.

▶▶Security Device Support

Enables or disables the TPM function to build the endorsement key for accessing
the system.

▶▶TPM Device Selection

Selects TPM device: dTPM or fTPM 2.0.
[dTPM] Select it for hardware TPM.
[fTPM 2.0] Select it for software TPM.

▶▶SH-1 PCR Bank

Enables or disables the SH-1 PCR bank.

▶▶SHA256 PCR Bank

Enables or disables the SHA256 PCR bank.

▶▶SHA384 PCR Bank

Enables or disables the SHA384 PCR bank.

▶▶SM3_256 PCR Bank

Enables or disables the SM3_256 PCR bank.

▶▶Pending operation
Sets the action of pending TPM operation.
[None] Discard the selelction
[TPM Clear] Clear all data secured by TPM.

▶▶Platform Hierarchy
Enables or disables platform hierarchy.

▶▶Storage Hierarchy
Enables or disables storage hierarchy.

▶▶Endorsement Hierarchy
Enables or disables endorsement hierarchy.

▶▶TPM 2.0 UEFI Spec Version

Selects TCG2 (Trusted Computing Group 2) Spec version.

▶▶Physical Presence Spec Version

Selects the PPI (Physical Presence Interface) Spec version.

BIOS Setup 27
 ▶▶Chassis Intrusion Configuration
Press Enter to enter the sub-menu.

▶▶Chassis Intrusion
Enables or disables recording messages while the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.

▶▶Secure Boot
Press Enter to enter the sub-menu.

▶▶Secure Boot
Secure Boot function can be enabled only when the Platform Key(PK) is enrolled
and running accordingly.

▶▶Secure Boot Mode

Selects the secure boot mode. This item is to select how the secure boot keys be
loaded. This item appears when "Secure Boot" is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load
the secure keys.

▶▶Enroll all Factory Default keys

Allows you to install all factory default keys. The settings will be applied after
reboot or at the next reboot. This item appears when "Secure Boot Mode" sets to
Custom.

▶▶Delete all Secure Boot variables

Allows you to delete all the Secure Boot keys(PK,KEK,db,dbt,dbx). The settings will
be applied after reboot or at the next reboot. This item appears when "Secure Boot
Mode" sets to Custom.

▶▶Key Management
Press Enter to enter the sub-menu. Manage the secure boot keys. This item
appears when "Secure Boot Mode" sets to Custom.

▶▶Provision Factory Default keys

Enables or disables the factory default keys.

▶▶Enroll all Factory Default keys

Allows you to install all factory default keys. The settings will be applied after
reboot or at the next reboot.

▶▶Delete all Secure Boot variables

Allows you to delete all the Secure Boot keys(PK,KEK,db,dbt,dbx). The settings
will be applied after reboot or at the next reboot.

28 BIOS Setup
▶▶Save all Secure Boot variables
Allows you to save all the Secure Boot keys(PK,KEK,db,dbt,dbx).

▶▶Enroll Efi Image

Allows the image to run in Secure Boot mode. Enroll SHA256 Hash certificate of a
PE image into authorized signature database (db).

▶▶Platform Key(PK): ? ? ?
The Platform Key (PK) can protect the firmware from any un-authenticated
changes. The system will verify the PK before your system enters the OS.
Platform Key (PK) is used for updating KEK.

▶▶Set New Key

Sets a new PK to your system.

▶▶Delete Key
Deletes the PK from your system.

▶▶Key Exchange Keys: ? ? ?

Key Exchange Key (KEK) is used for updating DB or DBX.

▶▶Set New Key

Sets a new KEK to your system.

▶▶Append Key
Loads an additional KEK from storage devices to your system.

▶▶Delete Key
Deletes the KEK from your system.

▶▶Authorized Signatures: ? ? ?
Authorized Signatures(DB) lists the signatures that can be loaded.

▶▶Set New Key

Sets a new DB to your system.

▶▶Append Key
Loads an additional DB from storage devices to your system.

▶▶Delete Key
Deletes the DB from your system.

▶▶Forbidden Signatures : ? ? ?
Forbidden Signatures (DBX) lists the forbidden signatures that are not trusted
and cannot be loaded.

▶▶Set New Key

Sets a new DBX to your system.

▶▶Append Key
Loads an additional DBX from storage devices to your system.

▶▶Delete Key
Deletes the DBX from your system.

BIOS Setup 29
 ▶▶Authorized TimeStamps: ? ? ?
Authorized TimeStamps (DBT) lists the the authentication signatures with
authorization time stamps.

▶▶Set New Key

Sets a new DBT to your system.

▶▶Append Key
Loads an additional DBT from storage devices to your system.

Save & Exit

▶▶Discard Changes and Exit

Exit BIOS setup without saving any change.

▶▶Save Changes and Reboot

Save all changes and reboot the system.

▶▶Save Changes
Save current changes.

▶▶Discard Changes
Discard all changes and restore to the previous values.

▶▶Restore Defaults
Restore or load all default values.

▶▶Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
to be the boot device.

30 BIOS Setup
OC Menu
This menu allows you to configure the frequencies and voltages for overclocking.
Please note that, higher frequency and voltage may benefit overclocking capability but
cause system un-stability.

⚠⚠Important
∙∙ Overclocking your PC manually is only recommended for advanced users.
∙∙ Overclocking is not guaranteed, and if done improperly, it could void your warranty
or severely damage your hardware.
∙∙ If you are unfamiliar with overclocking, we advise you to use GAME BOOST/
CREATOR GENIE function or easy overclocking.
∙∙ The BIOS options and settings in OC menu will vary from the motherboard you
purchased. Please refer to the actual BIOS of your system for the BIOS settings and
options.

▶▶OC Explore Mode

Enables or disables to show the normal or expert version of OC settings.
[Normal] Provides the regular OC settings in BIOS setup.
[Expert] Provides the advanced OC settings for OC expert to configure in BIOS
setup.

▶▶P-Core Ratio Apply Mode

Sets applied mode for P-Core ratio. This item only appears when a CPU that supports
Turbo Boost is installed.

▶▶P-Core Ratio
Sets the P-Core ratio that is used to determine CPU clock speed. This item only
appears when P-Core Ratio Apply Mode set to All Core.

BIOS Setup 31
 ▶▶Numbers of P-Core Cores of Group 1
Sets the number of P cores as a group 1 to run target P-Core Turbo Ratio Group 1. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 1

Sets the target P-Core Turbo ratio value for P-Core Group 1. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 2

Sets the number of P cores as a group 2 to run target P-Core Turbo Ratio Group 2. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 2

Sets the target P-Core Turbo ratio value for P-Core Group 2. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 3

Sets the number of P cores as a group 3 to run target P-Core Turbo Ratio Group 3. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 3

Sets the target P-Core Turbo ratio value for P-Core Group 3. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 4

Sets the number of P cores as a group 4 to run target P-Core Turbo Ratio Group 4. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 4

Sets the target P-Core Turbo ratio value for P-Core Group 4. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 5

Sets the number of P cores as a group 5 to run target P-Core Turbo Ratio Group 5. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 5

Sets the target P-Core Turbo ratio value for P-Core Group 5. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

32 BIOS Setup
▶▶Numbers of P-Core Cores of Group 6
Sets the number of P cores as a group 6 to run target P-Core Turbo Ratio Group 6. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 6

Sets the target P-Core Turbo ratio value for P-Core Group 6. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 7

Sets the number of P cores as a group 7 to run target P-Core Turbo Ratio Group 7. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 7

Sets the target P-Core Turbo ratio value for P-Core Group 7. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Numbers of P-Core Cores of Group 8

Sets the number of P cores as a group 8 to run target P-Core Turbo Ratio Group 8. The
next group should be more than the former one in the P core number. This item only
appears when P-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target P-Core Turbo Ratio Group 8

Sets the target P-Core Turbo ratio value for P-Core Group 8. The target ratio value
should not be higher than the former one. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio.

▶▶Adjusted CPU Frequency

Shows the adjusted CPU frequency. Read-only. This item only appears when P-Core
Ratio Apply Mode set to All Core or Turbo Ratio.

▶▶P-Core 0 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 1 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 2 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

BIOS Setup 33
 ▶▶P-Core 3 xxxx MHz
Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 4 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 5 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 6 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶P-Core 7 xxxx MHz

Sets the ratio for this single P-core if the CPU supports this function. The target speed
of each single P core in favored index may varied by different CPU. This item only
appears when P-Core Ratio Apply Mode set to Per Core.

▶▶Turbo Ratio Offset Value

Sets the P core Turbo ratio offset value. This item only appears when P-Core Ratio
Apply Mode set to Turbo Ratio Offset.

▶▶E-Core Ratio Apply Mode

Sets applied mode for E-core ratio. This item only appears when a CPU that supports
E-Core and Turbo Boost is installed.

▶▶E-Core Ratio
Sets the E-Core ratio that is used to determine CPU clock speed.

▶▶Numbers of E-Core of Group 1

Sets the number of E cores as a group 1 to run target E-Core Turbo Ratio Group 1.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 1

Sets the target E-Core Turbo ratio value for E-Core group 1. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 2

Sets the number of E cores as a group 2 to run target E-Core Turbo Ratio Group 2.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

34 BIOS Setup
▶▶Target E-Core Turbo Ratio Group 2
Sets the target E-Core Turbo ratio value for E-Core group 2. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 3

Sets the number of E cores as a group 3 to run target E-Core Turbo Ratio Group 3.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 3

Sets the target E-Core Turbo ratio value for E-Core group 3. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 4

Sets the number of E cores as a group 4 to run target E-Core Turbo Ratio Group 4.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 4

Sets the target E-Core Turbo ratio value for E-Core group 4. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 5

Sets the number of E cores as a group 5 to run target E-Core Turbo Ratio Group 5.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 5

Sets the target E-Core Turbo ratio value for E-Core group 5. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 6

Sets the number of E cores as a group 6 to run target E-Core Turbo Ratio Group 6.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 6

Sets the target E-Core Turbo ratio value for E-Core group 6. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 7

Sets the number of E cores as a group 7 to run target E-Core Turbo Ratio Group 7.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

BIOS Setup 35
 ▶▶Target E-Core Turbo Ratio Group 7
Sets the target E-Core Turbo ratio value for E-Core group 7. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Numbers of E-Core of Group 8

Sets the number of E cores as a group 8 to run target E-Core Turbo Ratio Group 8.
The next group should be more than the former one in E core number. This item only
appears when E-Core Ratio Apply Mode set to Turbo Ratio.

▶▶Target E-Core Turbo Ratio Group 8

Sets the target E-Core Turbo ratio value for E-Core group 8. The target Turbo Ratio
value should not be higher than the former one. This item only appears when E-Core
Ratio Apply Mode set to Turbo Ratio.

▶▶Adjusted E-Core Frequency

Shows the adjusted CPU frequency. Read-only. This item only appears when E-Core
Ratio Apply Mode set to All Core or Turbo Ratio.

▶▶E-Core 0-3 xxxx MHz

Sets the ratio for E core 0~3 if the CPU supports this function. This item only appear
when E-Core Ratio Apply Mode set to Per Core.

▶▶E-Core 4-7 xxxx MHz

Sets the ratio for E core 4~7 if the CPU supports this function. This item only appear
when Atom Ratio Apply Mode set to Per Core.

▶▶E-Core Turbo Ratio Offset Value

Sets the E-core Turbo ratio offset value. This item only appears when E-Core Ratio
Apply Mode set to Turbo Ratio Offset.

▶▶CPU Ratio Mode

Selects the CPU Ratio operating mode. This item will appear when you set the CPU
ratio manually.
[Fixed Mode] Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU
loading.

▶▶Advanced CPU Configuration

Press Enter to enter the sub-menu. User can set the parameters about CPU power/
current. The system may become unstable or un-bootable after changing the
parameters. If it occurs, please clear the CMOS data and restore the default settings.

▶▶CPU Force
It allows to show the CPU force illustration on the HELP window.

▶▶Extreme OC Setup
Sets the optimal BIOS setting for extreme overclocking.

36 BIOS Setup
▶▶Hyper-Threading
Enables or disables Intel Hyper-Threading technology. Intel Hyper-Threading
technology treats the multi cores inside the processor as multi logical processors
that can execute instructions simultaneously. In this way, the system performance
is highly improved. This item appears when the installed CPU supports this
technology.

▶▶Per P-Core Hyper-Threading Control

Allows you to set Hyper-Threading technology for individual CPU P-core.

▶▶P-Core 0 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 1 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 2 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 3 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 4 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 5 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 6 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶P-Core 7 Hyper-Threading
Enables or disable Hyper-Threading technology for this single P-core.

▶▶Per P-Core Control

Enables or disables every single P-core control.

▶▶P-Core 0
Enables or disables the P-core 0.

▶▶P-Core 1
Enables or disables the P-core 1.

▶▶P-Core 2
Enables or disables the P-core 2.

▶▶P-Core 3
Enables or disables the P-core 3.

▶▶P-Core 4
Enables or disables the P-core 4.

BIOS Setup 37
 ▶▶P-Core 5
Enables or disables the P-core 5.

▶▶P-Core 6
Enables or disables the P-core 6.

▶▶P-Core 7
Enables or disables the P-core 7.

▶▶Per E-Core Control

Enables or disables every single E-core control.

▶▶E-Core 0
Enables or disables the E-core 0.

▶▶E-Core 1
Enables or disables the E-core 1.

▶▶E-Core 2
Enables or disables the E-core 2.

▶▶E-Core 3
Enables or disables the E-core 3.

▶▶E-Core 4
Enables or disables the E-core 4.

▶▶E-Core 5
Enables or disables the E-core 5.

▶▶E-Core 6
Enables or disables the E-core 6.

▶▶E-Core 7
Enables or disables the E-core 7.

▶▶Active P-Cores
Allows you to select the number of active P-cores.

▶▶Active E-Cores
Allows you to select the number of active E-cores.

▶▶Intel Adaptive Thermal Monitor

Enables or disables the Intel adaptive thermal monitor function to protect the CPU
from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
[Disabled] Disables this function.

38 BIOS Setup
▶▶Intel C-State
Enables or disables the Intel C-state. C-state is a processor power management
technology defined by ACPI.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.

▶▶C1E Support
Enables or disables the C1E function for power-saving in halt state. This item
appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
[Disabled] Disables this function.

▶▶Package C State Limit

This item allows you to select a CPU C-state level for power-saving when system is
idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.

▶▶Intel Speed Shift Technology

Enables or disables Intel Speed Shift Technology. It can optimize energy efficiency.
This item is only available with the CPU that supports this technology.

▶▶EIST
Enables or disables the Enhanced Intel® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.

▶▶Intel Turbo Boost

Enables or disables the Intel® Turbo Boost. This item appears when a CPU that
support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over
specification when system request the highest performance state.
[Disabled] Disables this function.

▶▶Intel Turbo Boost Max Technology 3.0

Enables or disables the Intel® Turbo Boost Max 3.0. This item appears when a CPU
that support Turbo Boost Max 3.0 is installed.

▶▶Enhanced Turbo
Enables or disables turbo function for all CPU cores to boost the CPU performance.

▶▶Long Duration Power Limit (W)

Sets the long duration TDP power limit for CPU in Turbo Boost mode.

BIOS Setup 39
 ▶▶Long Duration Maintained (s)
Sets the maintaining time for Long duration power Limit(W).

▶▶Short Duration Power Limit (W)

Sets the short duration TDP power limit for CPU in Turbo Boost mode.

▶▶CPU Current Limit (A)

Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified value, the CPU will automatically reduce the core
frequency for reducing the current.

▶▶CPU Lite Load Control

Sets the CPU Lite Load control mode. Higher mode loads the higher CPU voltage
that could stabilize the system. Auto is recommended.

▶▶CPU Lite Load

Sets the CPU Lite Load mode. Higher mode loads the higher CPU voltage that
could stabilize the system and Auto is recommended. This item appears when CPU
Lite Load Control sets to Normal.

▶▶CPU AC Loadline
Sets the CPU AC load-line value. Higher value loads the higher CPU voltage that
could stabilize the system. This item appears when CPU Lite Load Control sets to
Advanced.

▶▶CPU DC Loadline
Sets the CPU DC load-line value. Higher value loads the higher CPU voltage that
could stabilize the system. This item appears when CPU Lite Load Control sets to
Advanced.

▶▶CPU Over Temperature Protection

Sets the temperature limit on CPU for over-temperature protection. The CPU
frequency may be throttled when CPU temperature over the specified value. When
set to Auto, BIOS will configure this settings. The higher temperature indicates less
protection.

▶▶CPU Ratio Extension

Enables or disables the CPU ratio extension for the corresponding CPU
overclocking under LN2. When set to Auto, BIOS will configure this setting
automatically.

▶▶CPU PLL Banding Ratio

Configures the CPU PLL banding ratio for the corresponding CPU overclocking
under LN2.

▶▶TVB Ratio Clipping

Enables or disables the TVB (Thermal Velocity Boost) ratio clipping. For
overclocking, it is recommend to disable this item. This item appears when the
installed CPU supports TVB.

▶▶TVB Voltage Optimizations

Enables or disables the TVB (Thermal Velocity Boost) voltage optimization for
processor. This item appears when the installed CPU supports TVB.

40 BIOS Setup
 ▶▶TVB Points Configuration
Press Enter to enter the sub-menu. User can configure the CPU ratio offset for
every point temperature of TVB (Thermal Velocity Boost). This sub-menu appears
when the installed CPU supports TVB.

▶▶TVB Points Temperature(℃)

Sets the point temperature of TVB.

▶▶TVB Points Ratio Offset

Sets the CPU offset ratio for the TVB point temperature set above.

▶▶PVD Ratio Threshold

Sets PVD ratio threshold for BCLK OC.

▶▶SA PLL Frequency

Sets SA PLL frequency for BCLK OC.

▶▶Core HW Fixup During TSC Copy

Enables or disables core hardware fix-up during TSC copy for BCLK OC.

▶▶IA CEP Support

Enables or disables IA CEP (Current Excursion Protection) support.

▶▶GT CEP Support

Enables or disables GT CEP (Current Excursion Protection) support.

▶▶DMI Link Speed

Sets DMI speed Gen1/ Gen2/ Gen3/ Gen4.

▶▶+CPU AVX Control

▶▶AVX Support
Enables or disables AVX (Advanced Vector Extensions) support.

▶▶CPU Ratio Offset When Running AVX

Sets a offset value to lower the CPU core ratio. It could be helpful for heat
dissipation when running AVX instructions. When set to Auto, BIOS will configure
this setting automatically. This item appears when the installed CPU and chipset
support this function.

▶▶AVX Voltage Guardband Scale

Sets the extra voltage for finetuning CPU core voltage when running AVX.

▶▶Ring Ratio
Sets the ring ratio. The valid value range depends on the installed CPU.

▶▶Adjusted Ring Frequency

Shows the adjusted Ring frequency. Read-only.

▶▶GT Ratio
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.

BIOS Setup 41
 ▶▶Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.

▶▶CPU Cooler Tuning

Selects the CPU cooler type, and CPU power limit profile will be configured
automatically according the cooler type by BIOS.

▶▶CPU Base Clock (MHz)

Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when a CPU that support this function is installed.

▶▶CPU Base Clock Apply Mode

Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.

▶▶Dashboard OC Button Control

Specifies the base clock or the CPU ratio for the OC button to overclock CPU in real
time.

▶▶Dashboard OC Button Step (MHz)

Sets the increase or decrease step for base clock when the OC button (+ or -) is
pressed each time.

▶▶Direct OC Button
Specifies the base clock or the CPU ratio for the OC button/ header to overclock CPU
in real time.

▶▶Direct OC Step (MHz)

Sets the increase or decrease step for base clock when the OC button (+ or -) is
pressed each time.

▶▶Extreme Memory Profile (XMP)

XMP (Extreme Memory Profile) is the overclocking technology by memory module.
Please enable XMP or select a profile of the memory module for overclocking the
memory. This item will be available when the memory modules that support XMP are
installed.

▶▶DRAM Reference Clock

Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.

42 BIOS Setup
▶▶CPU IMC : DRAM Clock
Selects the DRAM gear type for CPU IMC (Integrated Memory Controller). This item
appears when a CPU that supports this adjustment is installed.
[Gear 1] Higher bandwidth and lower latency time.
[Gear 2] Balance both of bandwidth and latency time.
[Gear 4] Lower bandwidth and higher latency time.

▶▶DRAM Frequency
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

▶▶Adjusted DRAM Frequency

Shows the adjusted DRAM frequency. Read-only.

▶▶Load Memory Presets [Disabled]

Load OC Memory Preset will optimize the timing, voltage of installed memory module.

⚠⚠Important
Manual tweaking or fine-tune preferred parameter is still recommended due to
different memory module manufacturing quality.

▶▶Memory Try It !
It can improve memory compatibility or performance by choosing optimized memory
preset.

▶▶DRAM Timing Mode

Selects the memory timing mode.
[Auto] The setting will be configured automatically by BIOS.
[Link] Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory
channel.

▶▶Advanced DRAM Configuration

Press Enter to enter the sub-menu. You can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section in motherboard user guide
to clear the CMOS data, and enter the BIOS to load the default settings.)

▶▶Memory Force
It allows showing the memory force illustration on the HELP window.

▶▶Lucky Mode
Enabling the lucky mode may enhance memory overclocking ability.

BIOS Setup 43
 ▶▶XMP User Profile
For DDR5 memory only.

▶▶SA GV
Enables or disables the SAGV (System Agent Geyserville). SAGV can dynamically
tunes the memory frequencies depending on system conditions.

▶▶Dynamic Memory Boost

Enables or disables the memory boost feature.

▶▶Realtime Memory Frequency

Enables or disables the real-time memory frequency.

▶▶DRAM Training Configuration

You can enable or disable the different DRAM training algorithms in this sub-menu.
When set to Auto, BIOS will configure this setting automatically.

▶▶Command Rate
Sets the command rate.

▶▶tCL
Sets the CAS (Column Address Strobe) latency time.

▶▶tRCD
Sets the RAS to CAS delay time.

▶▶tRP
Sets the row precharge time.

▶▶tRAS
Sets the RAS (Row Address strobe) active time.

▶▶tRFC
Sets the refresh to active/ refresh cycle time.

▶▶+Sub Timing Configuration

▶▶tREFI
Sets the REFI time.

▶▶tWR
Sets the write recover time.

▶▶tWTR
Sets the write to read delay time.

▶▶tWTR_L
Sets the internal write transaction to internal read command time .

44 BIOS Setup
▶▶tRRD
Sets the RAS to RAS delay time.

▶▶tRRD_L
Sets the RAS to RAS delay time in different bank of the same rank.

▶▶tRTP
Sets read to precharge command delay time.

▶▶tFAW
Sets the time window in which four activates are allowed the same rank.

▶▶tCWL
Sets CAS write latency time.

▶▶tCKE
Sets CKE minimum time.

▶▶tCCD
Sets CCD time.

▶▶tCCD_L
Sets CCD time.

▶▶+Turn Around Timing Configuration

▶▶Turn Around Timing Setting Mode

Selects the memory turn around timing mode.

▶▶tRDRDSG
Sets the read to read delay time between different rank separation parameter.

▶▶tRDRDDG
Sets the read to read delay time between different module.

▶▶tRDRDDR
Sets the read to read delay time between different rank separation parameter.

▶▶tRDRDDD
Sets the read to read delay time between different module.

▶▶tWRWRSG
Sets the write to write delay time between different rank separation parameter.

▶▶tWRWRDG
Sets the write to write delay time between different module.

▶▶tWRWRDR
Sets the write to write delay time between different rank separation parameter.

BIOS Setup 45
 ▶▶tWRWRDD
Sets the write to write delay time between different module.

▶▶tRDWRSG
Sets the read to write delay time between different rank separation parameter.

▶▶tRDWRDG
Sets the read to write delay time between different module.

▶▶tRDWRDR
Sets the read to write delay time between different rank separation parameter.

▶▶tRDWRDD
Sets the read to write delay time between different module.

▶▶tWRRDSG
Sets the write to read delay time between different rank separation parameter.

▶▶tWRRDDG
Sets the write to read delay time between different module.

▶▶tWRRDDR
Sets the write to read delay time between different rank separation parameter.

▶▶tWRRDDD
Sets the write to read delay time between different module.

▶▶+Advanced Timing Configuration

▶▶tWPRE
Sets the tWPRE time.

▶▶tRPRE
Sets the tRPRE time.

▶▶tWRPRE
Sets the tWRPRE time.

▶▶tRDPRE
Sets the tRDPRE time.

▶▶tXP
Sets the tXP time.

▶▶tXPDLL
Sets the tXPDLL time.

▶▶tXPDLL
Sets the tXPDLL time.

▶▶tPRPDEN
Sets the tPRPDEN time.

46 BIOS Setup
▶▶tPRPDEN
Sets the tPRPDEN time.

▶▶tRDPDEN
Sets the tRDPDEN time.

▶▶tWRPDEN
Sets the tWRPDEN time.

▶▶tCPDED
Sets the tCPDED time.

▶▶tAONPD
Sets the tAONPD time.

▶▶tREFIx9
Sets the tREFIx9 time.

▶▶tXSDLL
Sets the tXSDLL time.

▶▶tZQOPER
Sets the tZQOPER time.

▶▶tZQOPER
Sets the tZQOPER time.

▶▶tMOD
Sets the tMOD time.

▶▶tZQCS
Sets the tZQCS time.

▶▶tZQCAL
Sets the tZQCAL time.

▶▶tXSR
Sets the tXSR time.

▶▶tREFSBRD
Sets the tREFSBRDS time.

▶▶tCSH
Sets the tCSH time.

▶▶tCSL
Sets the tCSL time.

▶▶tCA2CS
Sets the tCA2CS time.

BIOS Setup 47
 ▶▶tCKCKEH
Sets the tCKCKEH time.

▶▶tCSCKEH
Sets the tCSCKEH time.

▶▶tRFM
Sets the tRFM time.

▶▶OREFRI
Sets the OREFRI time.

▶▶+Latency Timing Configuration tRTL/tIOL

▶▶Latency Timing Setting Mode

Selects the latency timing mode.

▶▶RTL Init Value (CHA)

Sets the initial RTL value (Round Trip Latency) for memory channel A.

▶▶RTL Init Value (CHB)

Sets the initial RTL value (Round Trip Latency) for memory channel B.

▶▶tRTL (CHA/D0/R0)
Sets the round trip latency time for channel A, DIMM0, RANK0.

▶▶tRTL (CHA/D0/R1)
Sets the round trip latency time for channel A, DIMM0, RANK1.

▶▶tRTL (CHA/D1/R0)
Sets the round trip latency time for channel A, DIMM1, RANK0.

▶▶tRTL (CHA/D1/R1)
Sets the round trip latency time for channel A, DIMM1, RANK1.

▶▶tRTL (CHB/D0/R0)
Sets the round trip latency time for channel B, DIMM0, RANK0.

▶▶tRTL (CHB/D0/R1)
Sets the round trip latency time for channel B, DIMM0, RANK1.

▶▶tRTL (CHB/D1/R0)
Sets the round trip latency time for channel B, DIMM1, RANK0.

▶▶tRTL (CHB/D1/R1)
Sets the round trip latency time for channel B, DIMM1, RANK1.

48 BIOS Setup
▶▶+Misc Item

▶▶Safe Boot Retry

Enables this item to meet the best memory compatibility while booting.

▶▶DRAM Voltage Boost

Sets the voltage for memory training. Higher voltage may benefit memory
overclocking capability but cause system unstable.

▶▶ODT Finetune (CHA)

Sets the ODT (ON-die termination) value for improving the overclocking capability
and stability of memory channel A.

▶▶ODT Finetune (CHB)

Sets the ODT (ON-die termination) value for improving the overclocking capability
and stability of memory channel B.

▶▶Rx Equalization
Sets the Rx Equalization value.

▶▶VTT ODT
Enables or disables the VTT ODT function.

▶▶Enhanced Interleave
Enables or disables the Enhanced Interleave support.

▶▶+On-Die Termination Configuration

▶▶Rtt Wr (CHA/D0)
Sets ODT RTT_WR for channel A, DIMM0.

▶▶Rtt Nom Rd(CHA/D0)

Sets ODT RTT_NOM_RD time for channel A, DIMM0.

▶▶Rtt Nom Wr(CHA/D0)

Sets ODT RTT_NOM_WR time for channel A, DIMM0.

▶▶Rtt Park (CHA/D0)

Sets ODT RTT_PARK for channel A, DIMM0.

▶▶Rtt Park Dqs (CHA/D0)

Sets ODT RTT_PARK DQS for channel A, DIMM0.

▶▶Rtt Wr (CHA/D1)
Sets ODT RTT_WR for channel A, DIMM1.

▶▶Rtt Nom Rd(CHA/D1)

Sets ODT RTT_NOM_RD time for channel A, DIMM1.

BIOS Setup 49
 ▶▶Rtt Nom Wr(CHA/D1)
Sets ODT RTT_NOM_WR time for channel A, DIMM1.

▶▶Rtt Park (CHA/D1)

Sets ODT RTT_PARK for channel A, DIMM1.

▶▶Rtt Park Dqs (CHA/D1)

Sets ODT RTT_PARK DQS for channel A, DIMM1.

▶▶Rtt Wr (CHB/D0)
Sets ODT RTT_WR for channel B, DIMM0.

▶▶Rtt Nom Rd(CHB/D0)

Sets ODT RTT_NOM_RD time for channel B, DIMM0.

▶▶Rtt Nom Wr(CHB/D0)

Sets ODT RTT_NOM_WR time for channel B, DIMM0.

▶▶Rtt Park (CHB/D0)

Sets ODT RTT_PARK for channel B, DIMM0.

▶▶Rtt Park Dqs (CHB/D0)

Sets ODT RTT_PARK DQS for channel B, DIMM0.

▶▶Rtt Wr (CHB/D1)
Sets ODT RTT_WR for channel B, DIMM1.

▶▶Rtt Nom Rd(CHB/D1)

Sets ODT RTT_NOM_RD time for channel B, DIMM1.

▶▶Rtt Nom Wr(CHB/D1)

Sets ODT RTT_NOM_WR time for channel B, DIMM1.

▶▶Rtt Park (CHB/D1)

Sets ODT RTT_PARK for channel B, DIMM1.

▶▶Rtt Park Dqs (CHB/D1)

Sets ODT RTT_PARK DQS for channel B, DIMM1.

▶▶Memory Fast Boot

Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training
for memory. And then the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
[No Training] The memory will not be trained every booting.
[SlowTraining]The memory will be trained every booting.

50 BIOS Setup
▶▶DigitALL Power
Press Enter to enter the sub-menu. In the sub-menu, you can setup some protecting
conditions about voltage/ current/ temputure for CPU.

▶▶CPU Loadline Calibration Control

The CPU voltage will decrease proportionally according to CPU loading. Higher
load-line calibration could get higher voltage and good overclocking performance,
but increase the temperature of the CPU and VRM. If set to Auto, BIOS will
configure this setting automatically.

▶▶CPU Over Voltage Protection

Sets the voltage limit for CPU over-voltage protection. If set to Auto, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.

▶▶CPU Over Current Protection

Sets the current limit for CPU over-current protection. If set to Auto, BIOS will
configure this setting automatically.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range for over-current protection.

▶▶CPU Switching Frequency

Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will configure this setting
automatically.

▶▶CPU VRM Over Temperature Protection

Enables or disables the CPU VRM over temperature protection.

▶▶CPU GT Loadline Calibration Control

The voltage of the GPU embedded in CPU will decrease proportionally according
to GPU loading. Higher load-line calibration could get higher voltage and good
overclocking performance, but increase the temperature of the CPU and VRM.

▶▶CPU GT Over Voltage Protection

Sets the voltage limit for CPU GT over-voltage protection. If set to Auto, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.

▶▶CPU GT Over Current Protection

Sets the current limit on CPU GT for over-current protection. If set to Auto, BIOS
will configure this setting 0utomatically.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range for over-current protection.

▶▶CPU GT Switching Frequency

Sets the PWM working speed to stabilize CPU GT voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will configure this setting
automatically.

BIOS Setup 51
 ▶▶CPU GT VRM Over Temperature Protection
Enables or disables the CPU GT VRM for over-temperature protection. The CPU GT
frequency may be throttled when VRM temperature over the specified value.

▶▶CPU AUX Loadline Calibration Control

The CPU AUX voltage will decrease proportionally according to CPU loading.
Higher load-line calibration could get higher voltage and good overclocking
performance, but increase the temperature of the CPU and VRM.

▶▶CPU Core Voltage Monitor

Selects the target item for monitoring CPU core voltage.

▶▶CPU Core Voltage Mode

Sets the CPU Core voltage mode.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Advanced Offset] Allows you to set the voltage and the offset voltage in the sub-
menu manually.

▶▶CPU Core Voltage

Sets the CPU core voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU Core Voltage Offset Mode

Selects the CPU Core voltage offset mode.

▶▶CPU Core Voltage Offset

Sets the offset value for CPU core voltage.

▶▶Advanced Offset Mode

Press Enter to enter the sub-menu.

▶▶Set Voltage Offset When Running CPU Ratio x8

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

52 BIOS Setup
▶▶Set Voltage Offset When Running CPU Ratio x25

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

▶▶Set Voltage Offset When Running CPU Ratio x35

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

▶▶Set Voltage Offset When Running CPU Ratio x43

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

▶▶Set Voltage Offset When Running CPU Ratio x48

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

▶▶Set Voltage Offset When Running CPU Ratio x50

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

▶▶Set Voltage Offset When Running CPU Ratio x51

▶▶Voltage Offset Control

Selects the voltage offset mode.

▶▶Voltage Offset Target

Sets the offset value.

BIOS Setup 53
 ▶▶CPU GT Voltage Mode
Sets the CPU GT voltage mode.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Advanced Offset] Allows you to set the voltage and the offset voltage in the sub-
menu manually.

▶▶CPU GT Voltage
Sets the CPU GT voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU GT Voltage Offset Mode

Selects the CPU GT voltage offset mode.

▶▶CPU GT Voltage Offset

Sets the offset voltage for CPU GT voltage.

▶▶CPU SA Voltage Mode

Sets the CPU SA voltage mode.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Advanced Offset] Allows you to set the voltage and the offset voltage in the sub-
menu manually.

▶▶CPU SA Voltage
Sets the CPU SA voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU SA Voltage Offset Mode

Selects the CPU SA voltage offset mode.

▶▶CPU SA Voltage Offset

Sets the offset voltage for CPU SA voltage.

54 BIOS Setup
▶▶CPU E-Core L2 Voltage Mode
Sets the CPU E-core L2 voltage mode.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Advanced Offset] Allows you to set the voltage and the offset voltage in the sub-
menu manually.

▶▶CPU E-Core L2 Voltage

Sets the CPU E-core L2 voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶CPU E-Core L2 Voltage Offset Mode

Selects the CPU E-core L2 voltage offset mode.

▶▶CPU E-Core L2 Voltage Offset

Sets the offset voltage for CPU E-core L2 voltage.

▶▶CPU VDDQ Voltage

Sets the CPU VDDQ Voltage.

▶▶CPU VDD2 Voltage

Sets the CPU VDD2 voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶CPU 1.05 Voltage

Sets the CPU 1.05 voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU 1.05 Voltage

Sets the CPU 1.05 voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU 1.8 Voltage

Sets the CPU 1.8 voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU AUX Voltage

Sets the CPU AUX voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU PLL SFR Voltage

Sets the CPU PLL SFR voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

BIOS Setup 55
 ▶▶GT PLL SFR Voltage
Sets the GT PLL SFR voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶Ring PLL SFR Voltage

Sets the Ring PLL SFR voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶SA PLL SFR Voltage

Sets the SA PLL SFR voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶E-Core L2 PLL SFR Voltage

Sets the E-core L2 PLL SFR voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶MC PLL SFR Voltage

Sets the MC PLL SFR voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶DRAM Voltage
Sets the DRAM voltage. If set to Auto, BIOS will set these voltages automatically or you
can set it manually.

▶▶DRAM VTT Voltage

Sets the DRAM VTT voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶DRAM VPP Voltage

Sets the DRAM VPP voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶DRAM VREF Voltage Control

Selects DRAM VREF voltage to be controlled by CPU or HW.

▶▶DRAM DIMMA1 VREF Voltage

Sets the DIMMA1 VREF voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM DIMMA2 VREF Voltage

Sets the DIMMA2 VREF voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM DIMMB1 VREF Voltage

Sets the DIMMB1 VREF voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

56 BIOS Setup
▶▶DRAM DIMMB2 VREF Voltage
Sets the DIMMB2 VREF voltage. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM Voltage Mode

Selects the DRAM voltage mode.
[Link] Allows you to configure the DRAM voltage for all memory channels.
[UnLink] Allows you to configure the DRAM voltage for the respective memory
channel.

▶▶DRAM Voltage
Sets the DRAM voltage for all memory channels. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMA1 Voltage

Sets the DRAM DIMMA1 voltage separately. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM DIMMA2 Voltage

Sets the DRAM DIMMA2 voltage separately. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM DIMMB1 Voltage

Sets the DRAM DIMMB1 voltage separately. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM DIMMB2 Voltage

Sets the DRAM DIMMB2 voltage separately. If set to Auto, BIOS will set these voltages
automatically or you can set it manually.

▶▶DRAM VDDQ Voltage

Sets the DRAM VDDQ voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶DRAM DIMMA1 VDDQ Voltage

Sets the DRAM DIMMA1 VDDQ voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMA2 VDDQ Voltage

Sets the DRAM DIMMA2 VDDQ voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMB1 VDDQ Voltage

Sets the DRAM DIMMB1 VDDQ voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMB2 VDDQ Voltage

BIOS Setup 57
 Sets the DRAM DIMMB2 VDDQ voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM VPP Voltage

Sets the DRAM VPP voltage. If set to Auto, BIOS will set these voltages automatically
or you can set it manually.

▶▶DRAM DIMMA1 VPP Voltage

Sets the DRAM DIMMA1 VPP voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMA2 VPP Voltage

Sets the DRAM DIMMA2 VPP voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMB1 VPP Voltage

Sets the DRAM DIMMB1 VPP voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶DRAM DIMMB2 VPP Voltage

Sets the DRAM DIMMB2 VPP voltage separately. If set to Auto, BIOS will set these
voltages automatically or you can set it manually.

▶▶PCH 0.82 Voltage

Sets the PCH 0.82 voltage. If set to Auto, BIOS will set these voltages automatically or
you can set it manually.

▶▶CPU Memory Changed Detect

Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.

▶▶OC Quick View Timer

Sets the duration of OC setting values showed on the screen. If set to Disabled, BIOS
will not show the variations of OC setting.

▶▶CPU Specifications
Press Enter to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing F4.
Read only.

▶▶CPU Technology Support

Press Enter to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.

58 BIOS Setup
▶▶MEMORY-Z
Press Enter to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing F5.

▶▶DIMMx Memory SPD

Press Enter to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.

▶▶CPU Features
Press Enter to enter the sub-menu.

▶▶Limit CPUID Maximum

Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot
problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.

BIOS Setup 59
 ▶▶Intel Virtualization Tech
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled] Disables this function.

▶▶Intel VT-D Tech

Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology.

▶▶Hardware Prefetcher
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled] Disables the hardware prefetcher.

▶▶Adjacent Cache Line Prefetch

Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.

▶▶CPU AES Instructions

Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.

▶▶CFG Lock
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.

60 BIOS Setup
M-FLASH Menu
M-FLASH provides the way to update BIOS with a USB flash drive. Please download
the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1. Insert the USB flash drive that contains the update file into the computer.
2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to
reboot and enter the flash mode.

3. The system will enter the flash mode and a file selection menu will appear after
rebooting.

4. Select a BIOS file to perform the BIOS update process.

5. After the flashing process is 100% completed, the system will reboot
automatically.

BIOS Setup 61
 OC PROFILE Menu
This menu allows you to set the BIOS profiles.

▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press Enter to enter the sub-menu.

▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Name the current overclocking profile.

▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Save the current overclocking profile.

▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Load the current overclocking profile.

▶▶Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Clear the current overclocking profile.

▶▶OC Profile Load from ROM

Load OC profile from BIOS ROM.

▶▶OC Profile Save to USB

Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.

▶▶OC Profile Load from USB

Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.

62 BIOS Setup
HARDWARE MONITOR Menu
This menu allows you to adjust the fan speed manually and monitor CPU/ system
voltage.
Select a temperature curve line (white)
to be showed in Fan operating window

Select a fan mode for target fan Select a fan to be configured

Click to enable
the Smart Fan

Smart Fan duty

information

Fan operating
window

Setting Buttons

Temperature
information

Voltage
information

∙∙ Smart Fan - This setting enables/disables the Smart Fan function. Smart Fan is an
excellent feature which will adjust the CPU/system fan speed automatically depending
on the current CPU/system temperature, avoiding the overheating to damage your
system.

▶▶Settings Buttons
▪▪All Full Speed - configures all fans to run at full operating speed.
▪▪All Set Default - configures all fans’ speeds return the BIOS default values.
▪▪All Set Cancel - discards current changes and restores previous settings for all
fan .

⚠⚠Important
Make sure fans are working properly after adjusting the fan speed and switching the
fan mode.

BIOS Setup 63
 Adjusting fans
1. Selects a fan that you want to adjust and to display the fan duty curve line (yellow)
in fan operating windows.
2. Click and drag the duty points to adjust the fan speed.

Select a fan to be adjusted

Duty points

64 BIOS Setup
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
∙∙ Go to BIOS and press F6 to load optimized defaults.
∙∙ Short the Clear CMOS jumper on the motherboard.
∙∙ Press the Clear CMOS button (optional) on the rear I/O panel.

⚠⚠Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper/ button section in the user guide for resetting BIOS.

Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Switch to the target BIOS ROM by Multi-BIOS switch. Skip this step if your
motherboard does not have this switch.
2. Insert the USB flash drive that contains the update file into the USB port.
3. Please refer the following methods to enter flash mode.
▪▪Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the
system.
▪▪Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button
and click on Yes to reboot the system.
4. Select a BIOS file to perform the BIOS update process.
5. When prompted click on Yes to start recovering BIOS.
6. After the flashing process is 100% completed, the system will reboot
automatically.

BIOS Setup 65
 Updating the BIOS with MSI Center
Before updating:
∙∙ Make sure the LAN driver is already installed and the internet connection is set
properly.
∙∙ Please close all other application software before updating the BIOS.
To update BIOS:
1. Install and launch MSI Center and go to Support page.
2. Select Live Update and click on the Advanced button.
3. Select the BIOS file and click on the Install button.
4. The installation reminder will appear, then click the Install button on it.
5. The system will automatically restart to update BIOS.
6. After the flashing BIOS process is 100% completed, the system will restart
automatically.

Updating BIOS with Flash BIOS Button

1. Please download the latest BIOS file that matches your motherboard model from
the MSI® website.
2. Rename the BIOS file to [Link], and save it to the root of your USB flash drive.
3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to install CPU
and memory.)
4. Plug the USB flash drive that contains the [Link] file into the Flash BIOS Port
on the rear I/O panel.
5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing.
6. The LED will be turned off when the process is completed.

66 BIOS Setup
Notices
Micro-Star Int’l Co.,Ltd.
The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other
marks and names mentioned may be trademarks of their respective owners. No
warranty as to accuracy or completeness is expressed or implied. MSI reserves the
right to make changes to this document without prior notice.

Copyright
© Micro-Star Int’l Co.,Ltd. 2021 All rights reserved.

Revision History
Version 1.0, 2021/ 10, First release

Notices 67