IGS-10020MT

Industrial L2+ 8-Port 10/100/1000T + 2 100/1000X

SFP Managed Switch

Physical Port
• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection

Industrial Case / Installation

• IP30 aluminum case protection
• DIN-rail or wall-mount design
• Redundant power design
–– 12 to 48V DC, redundant power with polarity reverse
protect function
–– AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

PLANET IGS-10020MT is a fully-managed Gigabit fiber switch usually designed Industrial Protocol
for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2 • Modbus TCP for real-time monitoring in SCADA system
100/1000BASE-X SFP ports and redundant power system in an IP30 rugged but • IEEE 1588v2 PTP (Precision Time Protocol)
compact-sized case that can be installed in any difficult environment without space
limitation. Within such favorable enclosure, it provides user-friendly yet advanced IPv6/ Layer 2 Features
IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static • High performance of Store-and-Forward architecture and
routing capability. The IGS-10020MT can operate stably under the temperature range runt/CRC filtering eliminates erroneous packets to optimize
from -40 to 75 degrees C and allows either DIN-rail or wall mounting for efficient use of the network bandwidth
cabinet space. With 2 dual-speed SFP fiber slots, it can be flexibly applied to extend • Storm Control support

the connection distance. –– Broadcast, Multicast and Unknown Unicast

• Supports VLAN
–– IEEE 802.1Q tagged VLAN
–– Up to 255 VLANs groups, out of 4095 VLAN IDs
–– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–– Private VLAN Edge (PVE)
–– Protocol-based VLAN
–– MAC-based VLAN
–– Voice VLAN
–– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
–– IEEE 802.1D Spanning Tree Protocol (STP)
–– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
–– BPDU Guard
Cybersecurity Network Solution to Minimize Security Risks
• Supports Link Aggregation
The cybersecurity feature that virtually needs no effort and cost to have includes
–– 802.3ad Link Aggregation Control Protocol (LACP)
the protection of the switch management and the enhanced security of the mission-
–– Cisco ether-channel (static trunk)
critical network. Both SSH and TLS protocols are utilized to provide strong protection –– Maximum 5 trunk groups, up to 10 ports per trunk group
against advanced threats. It includes a range of cybersecurity features such as –– Up to 20Gbps bandwidth (duplex mode)
DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based • Provides port mirror (many-to-1)

and MAC-based network access control, RADIUS and TACACS+ user accounts • Port mirroring to monitor the incoming or outgoing traffic on

management, SNMPv3 authentication, and so on to complement it as an all-security a particular port

• Loop protection to avoid broadcast loops
solution. The network administrator can now construct highly-secure corporate networks
• Supports ERPS (Ethernet Ring Protection Switching)
with considerably less time and effort than before.
• Compatible with Cisco Uni-directional link detection
Data Sheet (UDLD) that monitors a link between two switches and

1 1
 IGS-10020MT

blocks the ports on both ends of the link if the link fails at
any point between the two devices
• Link Layer Discovery Protocol (LLDP)

Layer 3 IP Routing Features

• Supports maximum 32 static routes and route
summarization

Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
Redundant Ring, Fast Recovery for Surveillance System • 8 priority queues on all switch ports
The IGS-10020MT supports redundant ring technology and features strong rapid self-
• Traffic classification
recovery capability to prevent interruptions and external intrusions. It incorporates
–– IEEE 802.1p CoS
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, –– IP TOS / DSCP / IP Precedence
Spanning Tree Protocol (802.1s MSTP), and redundant power input system into –– IP TCP/UDP port number
customer’s industrial automation network to enhance system reliability and uptime in –– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
harsh factory environments. In certain simple Ring network, the recovery time of data
policies
link can be as fast as 10ms.
• Supports QoS and In/Out bandwidth control on each port
Control Center
• Traffic-policing on the switch port
• DSCP remarking

IP Camera
Multicast
IP Camera
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
IGS-10020MT
• Querier mode support
ERPS Ring
Recovery time <50 ms • IPv4 IGMP Snooping port filtering
IGS-10020MT
IGS-10020MT
802.11n AP 802.11n AP
• IPv6 MLD Snooping port filtering
Factory Warehouse
• MVR (Multicast VLAN Registration)
100BASE-TX UTP
1000BASE-T UTP
Security
• Authentication
SMTP/SNMP Trap Event Alert –– IEEE 802.1x Port-based/MAC-based network access
The IGS-10020MT provides event alert function to help to diagnose the abnormal device authentication
owing to whether or not there is a break of the network connection, or the rebooting –– Built-in RADIUS client to cooperate with the RADIUS
servers
response.
–– TACACS+ login users access authentication
–– RADIUS/TACACS+ users access authentication
Effective Alarm Alert for Better Protection • Access Control List
The IGS-10020MT supports a Fault Alarm feature which can alert the users when –– IP-based Access Control List (ACL)
there is something wrong with the switches. With this ideal feature, the users would not –– MAC-based Access Control List
have to waste time finding where the problem is. It will help to save time and human • Source MAC/IP address binding

resource. • DHCP snooping to filter distrusted DHCP messages

Fault Alarm Feature • Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
Mail • IP address access management to prevent unauthorized
intruder

or System Management
Log
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
SNMP –– Telnet Command Line Interface
TRAP
–– Web switch management
DC/DC Power Failure Fiber/RJ45 Connection –– SNMP v1 and v2c switch management
Link Down –– SSH/TLS and SNMP v3 secure access

2
 IGS-10020MT

Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management • SNMP Management
To help customers stay on top of their businesses, the IGS-10020MT not only provides –– Four RMON groups (history, statistics, alarms, and
high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 events)
software VLAN routing feature which allows to cross over different VLANs and different –– SNMP trap for interface Link Up and Link Down
notification
IP addresses for the purpose of having a highly-secure, flexible management and simpler
• IPv6 IP address/NTP/DNS management
networking application.
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
Robust Layer 2 Features
• System Maintenance
The IGS-10020MT can be programmed for advanced switch management functions
–– Firmware upload/download via HTTP/TFTP
such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning
–– Reset button for system reboot or reset to factory default
Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The –– Dual Images
IGS-10020MT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be • DHCP Relay and DHCP Option 82
maximally up to 255. Via aggregation of supporting ports, the IGS-10020MT allows the • DHCP Server
operation of a high-speed trunk combining multiple ports. It enables a maximum of up to • User Privilege levels control
10 trunk groups with 8 ports per trunk group, and supports fail-over as well. • Network Time Protocol (NTP)
• SFP-DDM (Digital Diagnostic Monitor)
MSTP LACP • Network Diagnositc

Q-in-Q QoS LLDP

–– ICMPv6/ICMPv4 Remote Ping
–– Cable diagnostic technology provides the mechanism to
MLD IGMP
detect and report potential cabling issues
L2/L4 L2/L4 • PLANET Smart Discovery Utility for deployment
Managed Switch Managed Switch
management

Efficient Management
For efficient management, the IGS-10020MT is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management
interface, the IGS-10020MT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-
10020MT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management
software by supporting SNMPv3 connection which encrypts the packet content at each session.

01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010

Computer

SSL SNMPv3 SSH

Powerful Security from Layer 2 to Layer 4

The IGS-10020MT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network
access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the private VLAN
function, communication between edge ports can be prevented to ensure user privacy.

Flexibility and Extension Solution

The additional two mini-GBIC slots built in the IGS-10020MT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable)
fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but
also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/40/80/120 kilometers (single-mode fiber or
WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

3
 IGS-10020MT

Intelligent SFP Diagnosis Mechanism

The IGS-10020MT supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of
the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Digital Diagnostic Monitor (DDM)

Voltage

150 Ammeter
100 200

30
50 250 20 40

0 300 10 50

V 0 60

A Temperature

°C
0
−20 20
0
−20 20 −40 40

−40 40
−60 60

dBm
−60 60

dBm
Power Transceiver
Power Receiver

1588 Time Protocol for Industrial Computing Networks

The IGS-10020MT is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588
and synchronous Ethernet.

Time Synchronization in Network

IGS-10020MT
Transparent Clock
Grand Master Clock
Slave Clock

1000 1000

1588 PTP 1588 PTP

Base Station
1000 1000BASE-SX/LX Fiber-optic

Modbus TCP Provides Flexible Network Connectivity for Factory Automation

With the supported Modbus TCP/IP protocol, the IGS10020MT can easily integrate with SCADA systems, HMI systems and other data acquisition systems
in factory floors. It enables administrators to remotely monitor the statuses of the industrial Ethernet switch, ports and communication, thus easily
achieving enhanced monitoring and maintenance of the entire factory.

Environmentally Hardened Design

With IP30 aluminum industrial case protection, the IGS-10020MT provides a high level of immunity against electromagnetic interference and heavy electrical
surges which are usually found on plant floors or in curb-side traffic control cabinets. It also possesses an integrated power supply source with a wide range
of voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the
temperature range from -40 to 75 degrees C, the IGS-10020MT can be placed in almost any difficult environment.

4
 IGS-10020MT

Applications
Industrial Area Manageable Switch for Data Collection and Forwarding
The IGS-10020MT offers high performance and high reliability to make sure the continuous industrial operation in harsh environments such as traffic
control cabinets, factory floors, and the outdoor places where temperature is extremely low or high. With a non-blocking design and desktop size, the
installation of the IGS-10020MT is easy and helpful to build a Gigabit high-bandwidth network quickly.
To further expand the current network, the IGS-10020MT provides advanced Web and SNMP management interface to fulfill this kind of demand. With its
built-in Web-based management function, the IGS-10020MT offers an easy-to-use, platform-independent management and configuration facility. It supports
standard Simple Network Management Protocol (SNMP) that makes the managed switch able to be monitored via any standard-based management
software. By adopting the IGS-10020MT which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery
capability, and safe Ethernet network operation.

Weather Station Desert

IP Camera IP Camera
IP Camera

IP Camera 70km
1000
IGS-10020MT IGS-10020MT

40km
100

Fiber
Switch

70km

Data Center
20km
100
1000

IGS-10020MT IP Camera IP Camera

1000
30km

30km 120km 30km

100 1000 1000

IGS-10020MT IGS-10020MT
IGS-10020MT
Winter season of Country Steel Factory

100 100BASE-FX Fiber-optic

1000 1000BASE-SX/LX Fiber-optic
100BASE-TX UTP

Security Building Automation Switch

The IGS-10020MT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network
access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. The network administrators
can now construct highly-secure corporate networks with considerably less time and effort than before.

IP Camera

Wireless AP Ethernet Switch

1000

Core
Fiber Switch
1000 IGS-10020MT

|O|O|

Access Control IP Camera

Security Gate Serial Server

1000 1000BASE-SX/LX Fiber-optic

100BASE-TX UTP
1000BASE-T UTP
Serial Line (RS-XXX)
5
|O|O|
 IGS-10020MT

FTTx / MAN Edge Switch

The IGS-10020MT provides a high-performance edge service for FTTx network solutions, such as FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for
ISPs and FTTB (Fiber to the Building) for enterprises.

FTT Building ISP/Telecom Central Building

Q-in-Q VLAN
ACL

1000

1000
IPv6 Remote IP Management
UTM Security Gateway IGS-10020MT Internet

FTT Curb

802.1x QoS
1000

IP Camera
IGS-10020MT

IPv6 L3
Video/IPTV/ Data Voice
Core Switch
Wireless AP MOD

1000 1000BASE-SX/LX Fiber-optic

1000BASE-T UTP
100BASE-TX UTP

Specifications
Model IGS-10020MT
Hardware Specifications
Copper Ports 8 10/ 100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports
2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
SFP/mini-GBIC Slots
Compatible with 100BASE-FX SFP
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps/non-blocking
Throughput (packet per second) 14.8Mpps
Address Table 8K entries, automatic source address learning and ageing
Shared Data Buffer 512 kilobytes
Flow Control IEEE 802.3x pause frame for full duplex. Back pressure for half duplex
Jumbo Frame 9Kbytes
< 5 sec: System reboot
Reset Button
> 5 sec: Factory Default
ESD Protection 6KV DC
Enclosure IP30 aluminum metal case
Installation DIN-rail kit and wall-mount kit
Removable 6-pin terminal block for power input
Connector
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
One relay output for power failure.
Alarm
Alarm relay current carry ability: 1A @ DC 24V
System: Per 10/100/1000T RJ-45 Ports:
Power 1 (Green) LNK/ACT (Green)
Power 2 (Green) 1000 (Orange)
LED Indicator
Fault Alarm (Green) Per SFP Interface:
Ring (Green) LNK/ACT (Green)
R.O. (Green) 1000 (Orange)
Dimensions (W x D x H) 56 x 87.8 x 135 mm
Weight 720g
Dual 12~48V DC
Power Requirements
24V AC
Power Consumption 10 watts/34BTU (full loading)
Layer 2 function
Basic Management Interfaces Web Browser, Remote Telnet, SNMP v1, v2c
Secure Management Interface SSH, TLS, SNMP v3

6
 IGS-10020MT

Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Port configuration
Flow Control disable / enable
Power saving mode control
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, and trunk status.
TX / RX / Both
Port Mirroring
Many to 1 monitor
802.1Q tagged VLAN ,up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
IEEE 802.3ad LACP / static trunk
Link Aggregation
Support 5 trunk groups with 10 ports per trunk
Traffic classification based, strict priority and WRR
8-level priority for switching
- Port number
QoS
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
IGMP (v1/v2/V3) Snooping, up to 255 multicast groups
IGMP Snooping
IGMP Querier mode support
MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Snooping
MLD Querier mode support
IP-based ACL / MAC-based ACL
Access Control List
Up to 123 entries
Per port bandwidth control
Bandwidth Control Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
RFC-1213 MIB-II RFC-2737 Entity MIB
IF-MIB RFC-2618 RADIUS Client MIB
RFC-1493 Bridge MIB RFC-2933 IGMP-STD-MIB
SNMP MIBs RFC-1643 Ethernet MIB RFC3411 SNMP-Frameworks-MIB
RFC-2863 Interface MIB IEEE 802.1X PAE
RFC-2665 Ether-Like MIB LLDP
RFC-2819 RMON MIB (Group 1, 2, 3 and 9) MAU-MIB
Layer 3 Function
IP Interfaces Max. 8 VLAN interfaces
Routing Table Max. 32 routing entries
IPv4 software static routing
Routing Protocols
IPv6 software static routing
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
IEC60068-2-32 (free fall)
Stability Testing IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)

IEEE 802.3 10BASE-T IEEE 802.1ab LLDP

IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 1588 PTPv2
IEEE 802.3z Gigabit SX/LX RFC 768 UDP
IEEE 802.3ab Gigabit 1000T RFC 793 TFTP
IEEE 802.3x flow control and back pressure RFC 791 IP
IEEE 802.3ad port trunk with LACP RFC 792 ICMP
Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 2068 HTTP
IEEE 802.1w Rapid Spanning Tree Protocol RFC 1112 IGMP v1
IEEE 802.1s Multiple Spanning Tree Protocol RFC 2236 IGMP v2
IEEE 802.1p Class of Service RFC 3376 IGMP version 3
IEEE 802.1Q VLAN tagging RFC 2710 MLD version 1
IEEE 802.1ad Q-in-Q VLAN stacking FRC 3810 MLD version 2
IEEE 802.1X Port Authentication Network Control ITU G.8032 ERPS Ring
Environment
Temperature: -40 ~ 75 degrees C
Operating
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 75 degrees C
Storage
Relative Humidity: 5 ~ 95% (non-condensing)

7
 IGS-10020MT

Dimensions
Side View

V2- V2+
PWR2
Fault
V1+
PWR1
V1-
DC 12V~48V, AC 24V
Input

Mounting Kit

Bottom View Front View Top View Rear View

100/1000X SFP

DIN-Rail Kit

IGS-10020MT

Mounting Kit

Unit: mm

Ordering Information
IGS-10020MT Industrial L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)

Related Products
IGS-5225-4T2S Industrial L2+ 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C)
IGS-12040MT Industrial L2+ 8-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C)
IGS-10020PT Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)
IGS-10020HPT Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)
IGS-801M 8-Port 10/100/1000Mbps Managed Industrial Ethernet Switch (-40~75 degrees C)
IGS-10080MFT Industrial 8 100/1000X SFP + 2-Port 10/100/1000T Managed Switch (-40 ~ 75 degrees C)

8
 IGS-10020MT

Available Modules for IGS-10020MT

• 1000Mbps SFP transceiver modules
MGB-GT SFP-Port 1000BASE-T Module
MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 550m
MGB-SX2 SFP-Port 1000BASE-SX mini-GBIC module - 2km
MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 20km
MGB-L40 SFP-Port 1000BASE-LX mini-GBIC module - 40km
MGB-L80 SFP-Port 1000BASE-LX mini-GBIC module - 80km
MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km
MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km
MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km
MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km
MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km
MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km
MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km
MGB-TSX SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C)
MGB-TLX SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C)
MGB-TL40 SFP-Port 1000BASE-LX mini-GBIC module - 40km (-40 ~ 75 degrees C)
MGB-TL80 SFP-Port 1000BASE-LX mini-GBIC module - 80km (-40 ~ 75 degrees C)

• 100Mbps SFP transceiver modules

MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km
MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km
MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km
MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km
MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km
MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km
MFB-TFX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C)
MFB-TF20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C)

PLANET Technology Corporation

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-10020MT
231, Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved.
Email: sales@[Link] [Link]
9