Instructions

MINOX DTC 1000

1

Downloaded from www.Manualslib.com manuals search engine

 MINOX DTC 1000
• English page 43

Downloaded from www.Manualslib.com manuals search engine

 Content -- A. Camera Setting 55
-- Camera Mode 55
Scope of Delivery  45 -- Photo Format 55
Accessories (optional) 45 -- Photo Resolution 55
Introduction 46 -- Photo Burst 55
Get to Know Your MINOX DTC 1000 47 -- Video Resolution 55
Controls 49 -- Video Length 56
Preparing Your Camera 49 -- Video Sound 56
-- Explanation of the Controls 49 -- Quiet Time 56
-- Inserting the Batteries 50 -- Illumination  56
-- Checking the Battery Status 50 -- Time Stamp 57
-- Inserting the Memory Card  50 -- Set Date/Time 57
-- Inserting the SIM Card 51 -- Access Control 58
-- Language Settings 51 -- Power Type 58
-- Mounting the Camera 52 -- Format 59
Setup and Operational Modes 52 -- Temperature  59
-- Setup Mode 52 -- Duty Time 59
-- Operational Mode 52 -- Time lapse 60
Menu Functions and Settings  53 -- Default set 61
-- Manual Release 53
-- Camera Mode 53
-- Video Mode 53
-- Day and Night Modes 54
-- Photo and Video Playback 54
-- Delete Photos or Videos 54
-- Video Playback 54

43

Downloaded from www.Manualslib.com manuals search engine

 -- B. GSM Setup 61 -- C. GPS Input 74
--Settings Using the
Download Tool Software 61 -- D. Language 74
-- Send Mode 62
-- Send Via 62 -- E. Camera Information 74
-- Send To 65 -- Files Count 74
-- Operator Parameter 65 -- Storage 75
-- Recipients 66 -- Firmware Version 75
-- Remote Control 66 -- Camera Name 75
-- Camera Name 68
-- GPS 68 Connecting the Camera
-- Path 68 to a Computer 75
-- Testing the Mobile Phone Network  68 -- Connecting With a USB Cable 76
--Settings Using the Camera 69 -- Transferring Photos and Videos Via SD Card 76
-- Send Mode 69 MPEG-4 Visual Patent Portfolio License 76
-- Send Via 71 Technical Data 77
-- Send To 71 Warranty Terms 78
-- Network Setup  71
-- Download Tool 73
-- Remote Control 73

44

Downloaded from www.Manualslib.com manuals search engine

 Scope of Delivery Accessories (optional)
- MINOX DTC 1000 Trail Camera - Power adapter (EU version), order no. 65016
- Mounting strap - C able for attachment to an external battery,
- USB cable order no. 65017
- 12 x 1.5 V AA batteries - Bracket, order no. 65019
- 2 GB SD card
- Instructions Further information about accessories for the DTC
1000 can be found on the MINOX website:
www.minox.com

Important notice
Please use only the SD card included in the scope
of delivery. However, if you use a different card,
please format the card as described on page 59.
Files on the card from other devices can affect the
functionality of the camera.

45

Downloaded from www.Manualslib.com manuals search engine

 Introduction
Congratulations on the purchase of your MINOX DTC
1000 trail camera.

Like all other MINOX products, this MINOX DTC 1000

trail camera boasts of the traditional values fostered
by MINOX. It combines functionality and best optical
quality in the smallest possible space. Simple and fast
operation makes the MINOX DTC 1000 ideal for digi-
tal photos and videos in the intended fields of use.

These instructions are to help you make the most of

the full range of functions offered by your MINOX
DTC 1000 trail camera.

46

Downloaded from www.Manualslib.com manuals search engine

 Get to Know Your MINOX DTC 1000 Some product highlights include:

Please take a few moments to read these ­instructions - S ends images to your cell phone or per
carefully. e-mail instantly
- Q uadband technology
We wish you much enjoyment with your MINOX - Built in microphone for audio on video mode
product! - Daily report (total picture/video number get
captured during the past 24 hours, the battery
level and remaining storage space)
- IR-flash with black filter
- Adjustable motion sensor
- High range IR-flash of more than 50 feet (15 m)
- 8 megapixel resolution
- Convenient 2.0" color monitor
- Simple and intuitive operation,
6-button control panel
- Short shutter release delay of just 1 second
- Picture series and short videos
- Multilingual menu navigation
- SD/SDHC card up to 32 GB (2 GB card included)
- Small and discreet
- L ow power consumption
- Password protected
- Padlock lockable

47

Downloaded from www.Manualslib.com manuals search engine

 19

8
17
2 3 17
4 5 11
18
6 12

7 13 14 15 16

9
10

48

Downloaded from www.Manualslib.com manuals search engine

 Controls Preparing Your Camera
1. IR LEDs with a black filter for night recordings Explanation of the Controls
2. Twilight sensor Proceed as follows to prepare the camera for use:
3. Blue activation LED 1. Place your DTC 1000 on a flat surface.
4. Camera lens 2. Push the latch (5) up on the right of the camera body.
5. Lockable latch 3. Fold the latch (5) over to the right.
6. Motion sensor 4. Open the front of the camera to the left.
7. Rubber plug for external power supply
8. 2” LCD color display On the left of the opened camera body you will see
9. Memory card slot the controls (11, 12, 15) and on the right the battery
10. SIM card slot compartment (16). On the left outer edge of the cam-
11. Control buttons, OK button era body you can find the memory card and SIM card
12. Main switch with three positions: slots (9/10). At the top of the inner surface is the 2”
Off / Setup Mode / Operational Mode LCD display (8). Below the display you will see the
13. Port for external power supply (6V/9VDC) four directional buttons to make selections in the menu
14. USB cable port (11). In the center of these buttons you will find the OK
15. Menu button button (11) used to confirm the selected menu settings;
16. Battery compartment for 12 x 1.5 Volt AA batteries the oval-shaped ENTER button to the upper right (15) is
17. Mounting brackets to switch back to the main menu while in Setup Mode.
18. ¼” tripod thread
19. Antenna On the bottom left is the main switch (12) with three
positions for the following settings:
1. OFF = main switch to the left
2. SET = Setup Mode; main switch in the middle
3. ON = Operational Mode; main switch to the right

49

Downloaded from www.Manualslib.com manuals search engine

 On the bottom of the camera there are additional use a 12V power supply as this will damage the
ports for: camera and nullify the warranty.
- external power supply (13)
- USB cable (14) for attaching the camera to a com-
puter (read more under “Attaching the camera to Checking the Battery Status
a computer”) Switch the DTC 1000 into SET mode (main switch
(12) to the middle). You can find the battery status
To close the camera body, proceed as follows: symbol in the bottom left of the LCD display (8).
1. Place your DTC 1000 on a flat surface in front of you.
2. Fold the camera body to the right. Note: For best results, we recommend using high
3. Fold up the latch (5) on the right. quality batteries. The battery life can be prolonged
4. Slide the latch (5) down until firmly in place. by producing shorter video segments, short photo
bursts or longer “quiet times” – see “Quiet Time”
Inserting the Batteries under “Camera Settings”.
Your DTC 1000 camera is designed for AA alkaline,
lithium-ion (Li-Ion) or nickel metal hydride (NiMH)
batteries. To insert the batteries, open your camera Inserting the Memory Card
and insert twelve 1.5 Volt AA batteries into the bat- Your DTC 1000 camera supports (SD/SDHC) memory
tery compartment (16), making sure that the (+/-) cards with a capacity of up to 32 GB. Insert the mem-
poles are in the right direction. ory card into the memory card slot (9) with the brass
colored contacts toward the inside of the camera.
Note: Alternatively, an external power supply of Make sure that the camera is off and that the SD
6V or 9V can be used. If the camera is connected card is not locked.
to an external power supply, the batteries will be
bypassed – it is thus not possible to recharge bat- Note: Format your SD card using your PC before
teries while they are in the camera. Please do not every use – we suggest not to format the card with

50

Downloaded from www.Manualslib.com manuals search engine

 the DTC 1000 (see also “Format” under “Camera imprint of the proper card position is indicated next
Setting”). This procedure deletes older data from to the card slot.
the SD card and prepares your card for an error-free
operation in your camera. It is recommended to Note: Please make the sure the camera is turned
record some images directly after inserting the SD off before inserting or removing the card.
card to verify the camera’s functionality.

Please make sure that the camera is turned off be- Language Settings
fore inserting or removing the SD card. Switch your The DTC 1000 Trail Camera is set to English by factory
DTC 1000 to SET (12) to continue with your camera default. To change the menu navigation to a different
settings. language, please follow these steps:
1. Push the main switch (12) to SET.
Inserting the SIM Card 2. You are now in Manual Release mode.
To send photos with your DTC 1000, you will need 3. P ush MENU (15) once. You are now in the main
an activated SIM card from a mobile phone provider menu of the camera.
of choice. You can use a prepaid card or a phone 3. Push the UP arrow button (11) twice.
plan card. Make sure that the card used for the DTC 4. You are now in the “Language” menu.
1000 is activated to send MMS messages. It is also 5. Push OK (11) once.
important that this card is not locked with a PIN. 6. Using the UP/DOWN arrow buttons (11), select the
desired language.
Note: MINOX assumes no responsibility for any 7. Push OK (11) once.
costs that may arise in connection with the use of 8. T he main menu is now in the language you have
mobile telephone networks. chosen.

Insert the SIM card into the correct slot (10) with the
chip towards the front of the camera. A schematic

51

Downloaded from www.Manualslib.com manuals search engine

 Mounting the Camera Setup and Operational Modes
1. Mounting strap Your camera has two main modes:
On the back of the camera are two mounting brack-
ets (17) for fixing the camera to a tree or post with a Setup Mode
strap or mounting harness. Pass the mounting strap Switch your DTC 1000 to SET (12). You are now in
(included in the scope of delivery) through the two Manual Release mode. Push MENU (15) once to
brackets, around a tree or post and fasten tightly enter the main menu of the camera. In this mode
with the buckle. you can program the camera and set the date, time,
temperature, etc., to be displayed in the photos or
2. Tripod video footage.
On the back of the camera is a ¼” tripod thread (18)
for mounting the camera on a tripod. Operational Mode
Switch your DTC 1000 to ON (12). In this mode, your
DTC 1000 camera will be fully operational in accord-
ance with the settings that have been made during
the Setup Mode.

Note: The blue activation LED (3) will blink a few

seconds before the camera is in full operational
mode.

52

Downloaded from www.Manualslib.com manuals search engine

 Menu Functions and Settings Manual Release
This option enables you to use your DTC 1000 as a
The main menu of your DTC 1000 has 5 menu items normal digital camera. As with any common digi-
to choose from: tal camera, you can view scenes on the display and
capture them as photos or videos. The DTC 1000 is
A. Camera Setting in Manual Release mode by default after switch-
B. GSM Setup ing the camera to SET (see “Setup and Operational
C. GPS Input Modes”). You can switch between the camera and
D. Language video mode using the LEFT/RIGHT arrow buttons
E. Camera Information (11). Push MENU (15) to enter the main menu. Push
MENU again to go back to the Manual Release mode.
Push MENU (15) to enter the main menu of the cam-
era. In “Camera Setting” (A) you can set the camera Camera Mode
parameters to suit your particular needs. In “GSM The following is visible in the LCD display (8): At
Setup” (B) you can make the settings required to the top left is the camera symbol with the current
connect the camera to the mobile phone network. resolution setting and the top right the file capacity
In “GPS Input” (C) you can set the GPS coordinates [0000/0000]. At the bottom left is the current power
to be integrated into the meta-data of the photos. source and battery level. If a SD card has been in-
In “Language” (D) you can choose the language to serted, you will see the SD card symbol at the bottom
be used to operate the camera. “Camera Informa- right of the display. Push OK (11) to take a picture.
tion” (E) provides you with an overview of relevant
information about your DTC 1000 such as available Video Mode
storage space, firmware version or camera name. To switch to video mode, push the LEFT arrow button
(11). The following is visible in the LCD display (8):
At the top left is the video camera symbol and at
the upper right the recorded time [00:00:00]. At the

53

Downloaded from www.Manualslib.com manuals search engine

 bottom left is the current power source and battery have been correctly made, you can send a selected
level. If a SD card has been inserted, you will see the photo directly to a predefined number or email ad-
SD card symbol at the bottom right of the display. dress by pushing OK (11). It is not possible however,
Push OK (11) to begin recording a video. Push OK to send videos via your SIM card. Push MENU (15) to
again to stop recording. enter the main menu or the DOWN arrow button (11)
to go back to Manual Release mode.
Day and Night Modes
While in Manual Release mode, you can activate the Delete Photos or Videos
day or night mode by using the UP arrow button (11). While in the manual release mode, push the DOWN ar-
Your DTC 1000 is set to day mode by default – photos row button (11) or select “Playback” found in “Camera
and videos will be in color. To enter the infra-red Mode” under “Camera Setting”. Search for the photo or
night mode, push the UP arrow button (11). The dis- video that you would like to delete using the LEFT/RIGHT
play (8) will change from the daytime view in color arrow buttons (11). Push the UP arrow button (11) to
to the infra-red nighttime view in black and white. enter the submenu. Use the UP/DOWN arrow buttons
(11) to choose between “Delete One” or “Delete All”.
Photo and Video Playback Verify your choice with OK (11) and select either “No”
While in Manual Release mode, push the DOWN ar- or “Yes”. Verify your choice again with OK (11). Push
row button (11) or go to “Playback” found in “Camera MENU (15) to go back to the Manual Release mode.
Mode” under “Camera Setting”. You can now view
the photos or videos in the LCD display (8). The re- Video Playback
corded format can be seen in the upper right of the Use the LEFT/RIGHT arrow buttons (11) to browse your
display in the form of either a JPG or film strip symbol. files until you find the video that you would like to view
Above the symbol, you can see the file number and and then push OK (11). If you push OK again, a still shot
number of files. The length of the video can be seen of the video will be seen. Push OK again to continue
at the top left. By pushing the LEFT/RIGHT arrow but- playback. Push either MENU (15) or the DOWN arrow
tons (11) you can browse the files. If the GSM settings button (11) to go back to Manual Release mode.

54

Downloaded from www.Manualslib.com manuals search engine

 A. Camera Setting Photo Resolution
Go to the main menu and select “Camera Setting”
Camera Mode and then push OK (11). Select “Photo Resolution”
You can set your DTC 1000 to either take photos or and verify with OK (11). Select the desired resolu-
record videos. Push MENU (15) to enter the main tion – 3 MP, 5 MP or 8 MP – using the UP/DOWN
menu and select “Camera Mode”. Push the LEFT ar- arrow buttons (11) and verify with OK (11). You will
row button (11) to enter the previous menu or push automatically enter the “Camera Setting” menu. You
OK (11) and then use the UP/DOWN arrow buttons can make further settings or push the LEFT arrow
(11) to make your selection. After verifying your se- button (11) to enter the previous menu.
lection with OK (11), you will automatically enter the
manual release mode. Select “Playback” if you wish Photo Burst
to view your files. From here, you can press MENU Here you can set the camera to take either one, two
(15) to go back to Manual Release mode. or three photos in sequence with every trigger re-
lease. Go to the main menu and select “Camera Set-
Photo Format ting” and then push OK (11). Select “Photo Burst”
Go to the main menu and select “Camera Setting” and verify with OK (11). Push the UP/DOWN arrow
and then push OK (11). Select “Photo Format” and buttons (11) to make your selection of one, two or
verify with OK (11). Using the UP/DOWN arrow but- three photos and then verify with OK (11). You will
tons (11), select a desired format – “Normal” (4:3) or automatically enter the “Camera Setting” menu. You
“Wide Vision” (16:9) – and verify with OK (11). You can make further settings or push the LEFT arrow
will automatically enter the “Camera Setting” menu. button (11) to enter the previous menu.
You can make further settings or push the LEFT arrow
button (11) to enter the previous menu. Video Resolution
Go to the main menu and select “Camera Setting”
and then push OK (11). Select “Video Resolution”
and verify with OK (11). Select the desired resolution

55

Downloaded from www.Manualslib.com manuals search engine

 – HD (1280x720) or VGA (640x480) – using the UP/ Quiet Time
DOWN arrow buttons (11) and verify with OK (11). Here you can set the intervals between shutter re-
You will automatically enter the “Camera Setting” leases where the DTC 1000 should not record images
menu. You can make further settings or push the ie. how long the motion sensor should be deactivated
LEFT arrow button (11) to enter the previous menu. during a desired interval. The intervals can be set
between 5 to 59 seconds and 1 to 60 minutes. Go to
Video Length the main menu and select “Camera Setting” and then
Go to the main menu and select “Camera Setting” push OK (11). Select “Quiet Time” and verify with OK
and then push OK (11). Select “Video Length” and (11). Push the UP/DOWN arrow buttons (11) to make
verify with OK (11). Push the UP/DOWN arrow but- your selection and then verify with OK (11). You will
tons (11) to select your desired video length (5-60 automatically enter the “Camera Setting” menu. You
sec.) and then verify with OK (11). You will auto- can make further settings or push the LEFT arrow
matically enter the “Camera Setting” menu. You can button (11) to enter the previous menu.
make further settings or push the LEFT arrow button
(11) to enter the previous menu. Note: This function is always activated. The short-
est possible interval between photos, photo bursts
Video Sound or video recordings is 5 seconds. Please make sure
Here the video sound can be activated or deactivated that a desired interval is set before using the camera.
when in video mode. Go to the main menu and se-
lect “Camera Setting” and then push OK (11). Select
“Video Sound” and verify with OK (11). Push the UP/ Illumination
DOWN arrow buttons (11) to select “ON” or “OFF” This function has no influence on the DTC 1000.
and then verify with OK (11). You will automatically Please make sure that “Internal” is always activated.
enter the “Camera Setting” menu. You can make
further settings or push the LEFT arrow button (11)
to enter the previous menu.

56

Downloaded from www.Manualslib.com manuals search engine

 Time Stamp Time Format
Here you can activate or deactivate the timestamp Choose your desired time format of 12 or 24 hours
for your photos or videos. Go to the main menu and and then push OK (11). You will automatically enter
select “Camera Setting” and then push OK (11). Us- the “Camera Setting” menu. You can make further
ing the UP/DOWN arrow buttons (11), select “Time settings or push the LEFT arrow button (11) to enter
Stamp” and then verify with OK (11). Make your the previous menu.
selection using the UP/DOWN arrow buttons (11)
and push OK (11). You will automatically enter the Set Date/Time
“Camera Setting” menu. You can make further set- In the top row, you can set Day/Month/Year and in
tings or push the LEFT arrow button (11) to enter the the bottom row the hour/minutes (and AM/PM if
previous menu. setting for the 12 hour mode).

Set Date/Time Push the UP/DOWN arrow buttons (11) to choose

Here you can set the date and time that will appear the desired unit and the RIGHT and LEFT arrow but-
in the timestamp. Go to the main menu and select tons (11) to change positions from Day to Month etc.
“Camera Setting” and then push OK (11). Using the When you have finished making your settings, push
UP/DOWN arrow buttons (11), select “Set Date/ OK (11) to save your setting. You will automatically
Time” and then verify with OK (11). In the sub-menu, enter the “Set Date / Time” menu. You can make
you can make the following three settings: further settings or push the LEFT arrow button (11)
to enter the previous menu.
Date Format
Choose your desired date format and then push OK Note: It is suggested to enter the exact time and
(11). You will automatically enter the “Camera Set- date as this will automatically adjust the moon
ting” menu. You can make further settings or push phase calendar, which is displayed in the times-
the LEFT arrow button (11) to enter the previous tamp of your photo or video.
menu.

57

Downloaded from www.Manualslib.com manuals search engine

 Access Control word” and push OK (11). You will automatically enter
Here you can set a 4-digit PIN to prevent unauthor- the “Camera Setting” menu. You can make further
ized access to the files on your camera. Without a settings or push the LEFT arrow button (11) to enter
correct PIN, it is not possible to enter the main menu the previous menu.
after turning the camera on.
Power Type
Go to the main menu and select “Camera Setting” Your DTC 1000 Trail Camera is a high-tech precision
and then push OK (11). Using the UP/DOWN arrow device. It is highly suggested to use high-quality
buttons (11), select “Access Control” and then verify alkaline, Lithium-Ion or NiMH batteries. To set the
with OK (11). In the sub-menu, you can set the fol- correct type of batteries you will be using, go to the
lowing preferences: main menu and select “Camera Setting” and then
push OK (11). Using the UP/DOWN arrow buttons
Set Password (11), select “Power Type” and then verify with OK
Push the UP/DOWN arrow buttons (11) to choose (11). Choose the power source or battery type you
the desired number (0-9) and the RIGHT and LEFT will be using with the UP/DOWN arrow buttons (11)
arrow buttons (11) to change positions. When you and verify with OK (11).
are finished, verify your setting by pushing OK (11).
You will automatically enter the “Password” menu. Note: If you will use Li-Ion batteries, please select
You can make further settings or push the LEFT arrow “Lithium or Alkaline”. Alternative to batteries, an
button (11) to enter the previous menu. external power supply of 6V or 9V can be used.
If the camera is connected to an external power
Disable Password supply, the batteries will be bypassed – it is not
Go to the main menu and select “Camera Setting” possible to recharge the batteries while in the cam-
and then push OK (11). Using the UP/DOWN arrow era. Please do not use a 12V power supply as this
buttons (11), select “Access Control” and then verify will damage the camera and nullify the warranty.
with OK (11). In the sub-menu, choose “Disable Pass-

58

Downloaded from www.Manualslib.com manuals search engine

 After verifying your selection with OK (11), you will Note: It is recommended to record some images
automatically enter the “Camera Setting” menu. You directly after inserting the SD card to verify the
can make further settings or push the LEFT arrow camera’s functionality.
button (11) to enter the previous menu.

Format Temperature
Please make sure that the camera is turned off before Here you can set the temperature to be displayed
inserting or removing the SD card. Formatting your in your photos or videos in degrees of Fahrenheit or
memory card deletes older data from the SD card and Celsius. Go to the main menu and select “Camera
prepares it for an error-free operation in your camera. Setting” and then push OK (11). Using the UP/DOWN
After saving your files on an external hard drive, it is arrow buttons (11), select “Temperature” and then
recommended to format your SD card before every verify with OK (11). Make your selection of “Fahren-
use. If the card has been used in a different camera, heit” or “Celsius” and verify with OK (11). You will
do not use it in the DTC 1000 without first formatting automatically enter the “Camera Setting” menu. You
it with your PC. If however, the SD card included in can make further settings or push the LEFT arrow
the scope of delivery is used exclusively in your DTC button (11) to enter the previous menu.
1000, then it can also be formatted in the camera.
Duty Time
Go to the main menu and select “Camera Setting” and Here you can program your DTC 1000 to turn itself
then push OK (11). Using the UP/DOWN arrow buttons on and off during a preselected period of time. Dur-
(11), select “Format” and then verify with OK (11). ing the camera’s duty time, images will be recorded
Choose “Yes” if you wish to format your card and then only when the motion sensor has been activated.
push OK (11). This will delete all files on the card and This is especially useful if you know a certain area
format it for the next use. Select “No” and then OK (11) is frequented by wildlife during specific periods of
if you decide not to format your card or push the LEFT time – the camera is active only during the set time,
arrow button (11) to enter the previous menu. which considerably conserves battery power.

59

Downloaded from www.Manualslib.com manuals search engine

 Go to the main menu and select “Camera Setting” and Time lapse
then push OK (11). Using the UP/DOWN arrow buttons This is not to be confused with the duty time and
(11), select “Duty Time” and then verify with OK (11). is for the express purpose of defining a time frame
Select “Disable” or “Enable” and verify with OK (11). between which photos or videos should be made,
If you have chosen “Enable”, you can determine when regardless if the motion sensor has been triggered or
the camera should turn itself on and off. Select “Start not. During this time frame, a delay interval for each
Time” and push OK (11). Using the UP/DOWN arrow recording can be determined – for example, between
buttons (11), you can set the time in hours/minutes – 10:00 PM and 05:00 AM, the camera should record
please note, the duty time can only be set in the 24 images every 10 minutes.
hour format – and with the LEFT/RIGHT arrow buttons,
you can switch to the unit you wish to set. When you Note: If the motion sensor has nevertheless been
are finished making your setting, push OK (11). You activated by a moving animal or person during this
will automatically enter the “Duty Time” menu. Here delay interval, an image will be recorded as well.
you can set the “End Time”. Repeat the procedure ex-
plained above for setting the “Start Time”. When you Go to the main menu and select “Camera Setting” and
are finished making your settings, push OK (11). You then push OK (11). Using the UP/DOWN arrow buttons
will automatically enter the “Duty Time” menu. You (11), select “Time Lapse” and then verify with OK (11).
can make further settings or push the LEFT arrow but- Select “Disable” or “Enable” and verify with OK (11).
ton (11) to enter the previous menu. To deactivate the If you have chosen “Enable”, you can define the time
duty time, go to the main menu and select “Camera frame in which the camera should record images at
Setting” and then push OK (11). Using the UP/DOWN the preselected intervals. Select “Start Time” and push
arrow buttons (11), select “Duty Time” and then verify OK (11). Using the UP/DOWN arrow buttons, you can
with OK (11). Select “Disable” and verify with OK (11). set the time in hours/minutes – please note, the duty
You will automatically enter the “Duty Time” menu. time can only be set in the 24 hour format – and with
You can make further settings or push the LEFT arrow the LEFT/RIGHT arrow buttons, you can switch to the
button (11) to enter the previous menu. unit you wish to set. When you are finished making

60

Downloaded from www.Manualslib.com manuals search engine

 your setting, push OK (11). You will automatically enter B. GSM Setup
the “Time Lapse” menu. Here you can set the “End
Time”. Repeat the procedure explained above for set- Settings Using the Download Tool Software
ting the “Start Time”. When you are finished making With the Download Tool, you can set your DTC 1000
your setting, push OK (11). You will automatically enter to send photos via a mobile phone network. For a
the “Time Lapse” menu. Now select “Delay Interval” quick and basic configuration, most settings can also
and push OK (11). Using the UP/DOWN arrow buttons be made directly on the camera.
(11), determine the interval between which the camera
should record images – you can choose between 10 to Note: Please make the sure the camera is turned
59 seconds, 1 to 59 minutes or 1 to 12 hours. Push OK off before inserting or removing the SD card.
(11) to save your setting.

You will automatically enter the “Time Lapse” menu. How to use the Download Tool:
You can make further settings or push the LEFT arrow 1. To configure the camera via the Download Tool,
button (11) to enter the previous menu. insert an SD card and a SIM card into the camera
and push the main switch (12) to SET.
Default set 2. Go to the main menu and select “GSM Setup” and
Here you can set your DTC 1000 back to the factory de- then “Download Tool” in the submenu.
fault. All settings that have been made will be deleted. 3. P ush OK (11). The Download Tool will then be
Go to the main menu and select “Camera Setting” and saved onto the SD card as a ZIP file.
then push OK (11). Using the UP/DOWN arrow buttons 4. Turn the camera off, remove the SD card and insert
(11), select “Default Set” and then verify with OK (11). it into a SD card reader.
Choose “No” or “Yes” and verify with OK (11). You 5. Unzip the “DTC1000_SETUP.zip” file directly from
will automatically enter the “Camera Setting” menu. the SD card and run the “DTC1000_SETUP.exe” file.
You can make further settings or push the LEFT arrow
button (11) to enter the main menu.

61

Downloaded from www.Manualslib.com manuals search engine

 Send Mode Note: The time can only be set in the 24 hour for-
If “Send Mode” is off [Fig. 1], the GSM function is mat and the maximum number of photos that can
deactivated and you cannot send photos via your be sent cannot exceed 30.
mobile phone network card. If “Instant” has been
selected, you can have the photos sent immediately With “Daily Report” [Fig. 4], you can have a daily
to predefined telephone numbers or email addresses. report of the most important data sent to your mo-
bile phone per text message (SMS) at the predefined
When choosing “Instant” [Fig. 2], you must define time. The report contains for example the number of
the maximum number of photos that can be sent photos that have been made during the previous 24
within the following 24 hours. If for example you hours, battery status and remaining memory space
define 10, the first 10 photos made with the DTC on the SD card.
1000 will be sent. Photos made in the ensuing 24
hours after the tenth photo will be saved on the SD Note: The time can only be set in the 24 hour format.
card and not be sent.

Note: It is not possible to send more than 200 Send Via

photos per 24 hours. Your DTC 1000 offers you two options to send your
photos – either as an MMS or via GPRS. Depending
If you have chosen “Custom” [Fig. 3], you can define on the phone card plan and options, each MMS might
a specific time when the photos should be sent. Here be charged to your “normal” phone bill, whereas
too, you must define the maximum number of photos files sent via GPRS will require a data plan from your
that should be sent at the set time. As in this exam- provider. For both options however, you can specify
ple, the first 10 photos made with the DTC 1000 will multiple destinations.
be sent at 09:30 to the predefined phone numbers
or email addresses. If you have chosen to send your photos per MMS, the im-
ages will be sent to the predefined telephone numbers

62

Downloaded from www.Manualslib.com manuals search engine

 2

63

Downloaded from www.Manualslib.com manuals search engine

 and/or email addresses. You can define up to four tel- SMTP Server: Smtp.strato.de
ephone numbers as well as up to four email addresses. SMTP Port: 25
If you have chosen to send your files via GPRS, your
photos will be sent only to a maximum of four prede-
fined email addresses – your phone card must include
a data plan before you can use this option.
6
If you have se-
lected to have
your files sent
via GPRS, a re-
5 minder will ap-
pear requesting
you to set up
the sender’s
email address (Sending Email) [Fig. 5]. Click on OK and
click on “Sending Email”. Please enter the access data
for the sending email address [Fig. 6]. Please make
sure that the correct SMTP server is entered as these
types of servers require authentication via a username.
Note 1: Please enter the complete email address
We suggest using the following log-in data: in the “Email” and “Account” fields – the account
name is the same as the email address.
Email: smtp@ minox-dtc.de
Account: smtp@ minox-dtc.de Email: smtp@ minox-dtc.de
Password: MinoX-DTC Account: smtp@ minox-dtc.de

64

Downloaded from www.Manualslib.com manuals search engine

 Please make sure to enter the password using the telephone numbers – the options “Phone” and
upper and lower case letters (MinoX-DTC). “Both” are not possible.

Note 2: If you use a different email address, it Operator Parameter

cannot be encrypted with an SSL or TSL security Your DTC 1000 has been pre-configured to selected
protocol. These email servers do not allow the mobile phone providers around the world. You can
sending of photos sent via your DTC 1000. For more select the pre-configured settings for your country
information, please contact your email provider. [Fig. 7] or manually configure your camera if your
provider is not listed.

Send To 7
Here you can define whether the DTC 1000 should
send your photos to a telephone number, an email
address or to both.

If you have chosen “Phone”, your DTC 1000 will send First select your country and then your provider in the
the images to a maximum of 4 telephone numbers. drop-down lists. If your provider is not listed, select
If you have chosen “Email”, your DTC 1000 will send “Other” in both the “Country” and “Operator” drop-
the images to a maximum of 4 email addresses. If down lists [Fig. 8]. Next, click on “Custom” to open
you have chosen “Both”, your DTC 1000 will send the the “Operator Param” window [Fig. 9].
images to a maximum of 4 telephone numbers and
up to 4 email addresses simultaneously. 8
Note: If you choose the GPRS option, you can
send images only to email addresses and not to

65

Downloaded from www.Manualslib.com manuals search engine

 Enter the required parameters and click on “OK”. You Recipients
can get the necessary parameters from your provider. “Recipients” are the telephone numbers and /or
Here is an example of parameters for O ² in Germany: email addresses that are to receive your photos
[Fig. 10]. You can enter a maximum of 4 numbers
and 4 email addresses. Please use only a semicolon
( ; ) to separate the recipients from one another and
no other symbols or blank spaces.

10

Remote Control
This function allows you to change the “Send Mode”
(see “Send Mode”) of the DTC 1000 via a SMS text
message sent to the camera [Fig. 11].
9
11

66

Downloaded from www.Manualslib.com manuals search engine

 This message is read every day at the predefined time Here is a key to define the commands:
and implemented.
C = begin of command
Here you can set the time at which the text message #00# = Send Mode Off
(SMS) commands should be implemented. As soon as #01# = Instant
the commands have been carried out, you will receive #02# = Custom
a confirmation SMS at the number from which you #03# = Daily Report
sent the commands. If you have sent more than one HH = Hour
command per day, only the most recent command MM = Minute
will be carried out. NNN = maximum number of images to be sent
(applicable only in “Custom” send mode)
Note: Avoid sending more than one SMS command #E = end of command
to the DTC 1000 per day. The time can only be set
in the 24 hour format. For example, this command “C#02#0930#05#E” will
change the send mode to “Custom” which should be
The SMS commands must be formulated in the fol- implemented at 09:30 to send a maximum number
lowing pattern: of 5 images within that 24 hour period.

Send Mode Text Message (SMS) Example Note 1: You must keep to the exact formula when
Command Protocol sending text message commands to your DTC 1000,
Off C#00#E C#00#E otherwise they will not be carried out.
Instant C#01#NNN#E C#01#008#E
Custom C#02#HHMM#NN#E C#02#0930#05#E Note 2: If you have changed the send mode to
“Off” via Remote Control, you will not be able to
Daily Report C#03#HHMM#E C#03#1230#E
change the send mode per text message again un-
less you change the Send Mode manually.

67

Downloaded from www.Manualslib.com manuals search engine

 Camera Name evaluating the files using the appropriate software
You can give the camera a name that will appear (not included in the scope of delivery).
in the upper right corner of each recorded image or
video. Path
When you have finished entering the desired data,
Note: Only the following symbols are permitted click on “Save”. A file named “GSM.bin” will be cre-
in the name of your camera: A-Z, 0-9, /, _ , - , #. ated. Save the file directly to the SD card. Click on
Please do not use blank spaces. “Camera 1” for ex- the “…” button to define the path to your SD card
ample is not permitted. “Camera_1” is permitted. and click on “Save”.

Note: Please make sure the camera is turned off

GPS before inserting or removing the card.
Here you can enter the GPS coordinates of the current
location of your DTC 1000 [Fig. 12]. The coordinates Insert the SD card into the DTC 1000 and push the
can be determined by using a hand held GPS device main switch (12) to “SET”. You will see “Transfer
or mobile device with a GPS function or app. The Successful” in the display (8) for a few seconds. Your
coordinates will be included in the meta-data of DTC 1000 has accepted the GSM/GPS settings.
each image and video, which can then be read when
Testing the Mobile Phone Network
1. Push the main switch (12) to “SET”.
12 2. The DTC 1000 is now in the Manual Release mode.
If a SIM card has been inserted, the camera will be-
gin searching for available mobile phone networks.
If the “Send Mode” has been switched to “Off”,
during the “GSM Setup” procedure, the camera
will not search for a network. If “Instant” or “Cus-

68

Downloaded from www.Manualslib.com manuals search engine

 tom” has been activated, you will see “Searching Note: Depending on signal strength, the delivery
for Network” in the display (8). As soon as the of the photo can take from 20 to 60 seconds. Send-
DTC 1000 has found a network, you will see the ing photos via GPRS always takes more time than
network’s name in the bottom of the display (8). If via MMS.
a network could be found, you will see “Network
Not Found” and then “Login Failed”. To repeat the
procedure, push the RIGHT arrow button (11). Settings Using the Camera
As an alternative to the Download Tool, you can
Note: If the camera is unable to find a network make the basic GSM settings directly with your DTC
after several attempts, either the network signal 1000. Push MENU (15) to enter the main menu and
is too weak or the SIM card you are using is not select “GSM Setup” and then push OK (11). You are
compatible with the DTC 1000. now in the “GSM Setup” menu.

3. After the DTC 1000 has logged into the network, Send Mode
push the DOWN arrow button (11) to enter the Select “Send Mode” with the UP/DOWN arrow but-
Playback Mode or go to “Playback” in “Camera tons (11) and push OK (11). Here you can choose
Mode” (see “Camera Mode” in section A of these between four modes:
instructions). Use the LEFT/RIGHT arrow buttons
(11) to select the photo you would like to send and 1. Off
push OK (11). You will see “Sending” in the display 2. Instant
(8). The photo will now be sent to the predefined 3. Customized
recipients. After the photo has been successfully 4. Daily Report
sent, you will see “Sent” in the display (8) or “Not
Sent” if the photo could not be delivered. Use the UP/DOWN arrow buttons (11) to select the
mode you wish to use and push OK (11).

69

Downloaded from www.Manualslib.com manuals search engine

 1. S elect “Off” to deactivate the GSM function – the have finished making your settings, push OK (11)
DTC 1000 should not send photos – and verify with to save your setting or MENU (15) to exit without
OK (11). You will automatically enter the “GSM Set- saving. If for example you have set the time to
up” menu. You can make further settings or push 09:30 and "Daily Max" to 10, the first 10 photos
the LEFT arrow button (11) to enter the main menu. made with the DTC 1000 will be sent to the pre-
2. Select “Instant” and verify with OK (11) to have the defined recipients at 09:30.
photos sent immediately to the predefined recipi-
ents after they have been taken. Use the UP/DOWN Note: The time can only be set in the 24 hour for-
arrow buttons (11) to define the maximum number mat and the maximum number of photos that can
of photos that can be sent within the following 24 be sent cannot exceed 30.
hours. Verify with OK (11) or exit with MENU (15). If
for example you have defined 10, the first 10 photos 4. S elect “Daily Report” with OK (11) to have the
made with the DTC 1000 will be sent. Photos made most important data sent to your mobile phone
in the following 24 hours after the tenth photo will per text message (SMS) at the set time. The report
be saved on the SD card and not be sent. contains for example the number of photos that
have been made during the previous 24 hours,
Note: It is not possible to send more than 200 pho- battery status and remaining memory space on the
tos per 24 hours. SD card. To set the time at which the Daily Report
should be sent, push the UP/DOWN arrow buttons
3. S elect “Customized” with OK (11) to define a spe- (11) to set the desired unit and the RIGHT and
cific time when the photos should be sent and LEFT arrow buttons (11) to change positions from
the maximum number of photos to be sent during hour to minutes. When you have finished making
the following 24 hours. To do this, push the UP/ your settings, push OK (11) to save your setting or
DOWN arrow buttons (11) to set the desired unit MENU (15) to exit without saving.
and the RIGHT and LEFT arrow buttons (11) to
change positions from hour to minutes. When you Note: The time can only be set in the 24 hour format.

70

Downloaded from www.Manualslib.com manuals search engine

 Send Via images to a maximum of 4 telephone numbers and
Your DTC 1000 offers you two options to send your up to 4 email addresses simultaneously. Go to the
photos – either as an MMS or via GPRS. Depending main menu and select “GSM Setup” and then push
on the phone card plan and options, each MMS might OK (11). Using the UP/DOWN arrow buttons (11),
be charged to your “normal” phone bill, whereas select “Send To” and then verify with OK (11). In the
files sent via GPRS will require a data plan from your submenu, you can select “Phone”, “Email” or “Both”.
provider. For both options however, you can specify Make your selection and push OK (11). Push the LEFT
multiple destinations. Go to the main menu and se- arrow button (11) to go back to the previous menu.
lect “GSM Setup” and then push OK (11). Using the
UP/DOWN arrow buttons (11), select “Send Via” and Note: If you choose the GPRS option, you can
then verify with OK (11). You can choose between send images only to email addresses and not to
“MMS” or “GPRS”. Make your selection and push OK telephone numbers – the options “Phone” and
(11). If you have not defined the GPRS parameters us- “Both” are not possible.
ing the “Download Tool” software, you cannot select
“GPRS” in this menu. Push the LEFT arrow button
(11) to go back to the previous menu. Network Setup
Here you can define the telephone numbers and
Send To email addresses to receive the photos sent from
Here you can set the DTC 1000 to send your photos to your DTC 1000 and select your mobile phone net-
a telephone number, an email address or to both. You work provider.
can define up to 4 telephone numbers and 4 email
addresses. If you choose “Phone”, your DTC 1000 Enter Recipient Phone Number(s)
will send the images to a maximum of 4 telephone Go to the main menu and select “GSM Setup” and
numbers. If you choose “Email”, your DTC 1000 will then push OK (11). Using the UP/DOWN arrow but-
send the images to a maximum of 4 email addresses. tons (11), select “Network Setup” and then verify
If you choose “Both”, your DTC 1000 will send the with OK (11). Select “Recipient Phone” to enter up to

71

Downloaded from www.Manualslib.com manuals search engine

 four phone numbers and then push OK (11). Choose select “Network Setup” and then verify with OK (11).
a position with the UP/DOWN arrow buttons where Select “Recipient Email” to enter up to four email
you wish to save a telephone number and push OK addresses and then push OK (11). Choose a position
(11). With the LEFT/RIGHT arrow buttons (11), select with the UP/DOWN arrow buttons where you wish
the field and the UP/DOWN arrow buttons (11) to to save an email address and push OK (11). Use the
select a number and verify with OK (11). Repeat this LEFT/RIGHT arrow buttons (11) to select the fields
procedure until the telephone number is complete. and the UP/DOWN arrow buttons (11) to select the
If you have entered a wrong number, use the LEFT/ number, letter or symbol needed for the email ad-
RIGHT buttons to select the LEFT ARROW icon and dress. If you have entered a wrong figure, use the
push OK (11) to delete the number. Each time OK (11) LEFT/RIGHT buttons to select the LEFT ARROW icon
is pushed, a number will be deleted. and push OK (11) to delete the figure. Each time OK
(11) is pushed, a figure will be deleted.
To go back to the “Phone Number” menu without
saving a telephone number, use the LEFT/RIGHT To go back to the “Email” menu without saving the
arrow buttons to select the CURVED ARROW icon email address, use the LEFT/RIGHT arrow buttons to
and push OK (11) or push MENU (15). To save the select the CURVED ARROW icon and push OK (11) or
telephone number, use the LEFT/RIGHT arrow but- push MENU (15). To save the email address, use the
tons (11) to select the DISKETTE icon and then push LEFT/RIGHT arrow buttons to select the DISKETTE
OK (11). You will automatically enter the “Phone icon and then push OK (11). You will automatically
Number” menu. You can enter another telephone enter the “Email” menu. You can enter another email
number or push the LEFT arrow button (11) to enter address or push the LEFT arrow button (11) to enter
the “Setup Network” menu. the “Setup Network” menu.

Enter Recipient Email Address(es) Select Mobile Phone Network

Go to the main menu and select “GSM Setup” and then Go to the main menu and select “GSM Setup” and
push OK (11). Using the UP/DOWN arrow buttons (11), then push OK (11). Using the UP/DOWN arrow but-

72

Downloaded from www.Manualslib.com manuals search engine

 tons (11), select “Network Setup” and then verify the “Send Mode” of the DTC 1000 via a SMS text
with OK (11). message sent to the camera. This message is read
every day at the predefined time and implemented.
Select “Cellular Providers” and push OK (11). Use For instructions on how to set up the commands,
the UP/DOWN buttons (11) to select your country please see “Remote Control” under “Settings Using
and push OK (11). You will now see a list of precon- the Download Tool Software”.
figured providers in that country. Select your SIM
card provider and push OK (11). You will automati- Go to the main menu and select “GSM Setup” and
cally enter the “Country” menu. Push the LEFT ar- then push OK (11). Using the UP/DOWN arrow but-
row button (11) or MENU (15) to enter the “Network tons (11), select “Remote Control” and then verify
Setup” menu. with OK (11).

Note: If your provider is not listed, please follow Select “Disable” and push OK (11) to deactivate the
the “Operator Parameter” instructions under “Set- remote control or select “Enable” and push OK (11)
tings Using the Download Tool Software”. to set the “Receive Time”. Use the LEFT/RIGHT arrow
buttons (11) to select the fields and the UP/DOWN
arrow buttons to select the hour and minutes and
Download Tool verify with OK (11). You will automatically enter the
See the instructions under “Settings Using the Down- “Remote Control” menu. Please note, the “Receive
load Tool Software”. Time” can only be set in the 24 hour format. Push
the LEFT arrow button (11) to enter the “GSM Setup”
Remote Control menu or MENU (15) to go to Manual Release mode.
Here you can activate or deactivate the remote con-
trol for your DTC 1000. You can also set the time
at which the text message (SMS) commands should
be implemented. This function allows you to change

73

Downloaded from www.Manualslib.com manuals search engine

 C. GPS Input 1. P ush the main switch (12) to SET mode.
Here you can enter the GPS coordinates of the current 2. You are now in Manual Release mode.
location of your DTC 1000. The coordinates can be 3. P ush MENU (15) once. You are now in the main
determined by using a hand held GPS device or cell menu of the camera.
phone with a GPS function or app. The coordinates 3. Push the UP arrow button (11) twice.
will be included in the meta-data of each image and 4. You are now in the “Language” menu.
video, which can then be read when evaluating the 5. Push OK (11) once.
files using the appropriate software (not included 6. Using the UP/DOWN arrow buttons (11), select the
in the scope of delivery). Go to the main menu and desired language.
select “GPS Input” and then push OK (11). Using 7. Push OK (11) once.
the UP/DOWN arrow buttons (11), select “GPS In- 8. You are now in the main menu which is displayed
put” and then verify with OK (11). Select “Off” and in the language you have chosen.
push OK (11) to disable the GPS function or select
“On” and push OK (11) to set the “Coordinate Input”. E. Camera Information
Use the LEFT/RIGHT arrow buttons (11) to select the Go to the main menu and select “Camera Informa-
fields and the UP/DOWN arrow buttons to set the tion” and then push OK (11). Using the UP/DOWN
“Longitude” and “Latitude” coordinates and verify arrow buttons, you can select one of the following:
with OK (11). You will automatically enter the “GPS
Input” menu. Push the LEFT arrow button (11) to Files Count
enter the main menu or MENU (15) to go to Manual Storage
Release mode. Firmware Version
Camera Name
D. Language
The DTC 1000 Trail Camera is set to English by factory Files Count
default. To change the menu navigation to a different Select “Files Count” and push OK (11). Here you can
language, please follow these steps: see the number of photo and video files stored on

74

Downloaded from www.Manualslib.com manuals search engine

 the SD card. Push any button to enter the “Infor- (11) to enter the name for your camera. Use the LEFT/
mation” menu. Push the LEFT arrow button (11) to RIGHT arrow buttons (11) to select the fields and
enter the main menu or MENU (15) to go to Manual the UP/DOWN arrow buttons to select the number,
Release mode. letter or symbol needed for the name. If you have
entered a wrong figure, use the LEFT/RIGHT buttons
Storage to select the LEFT ARROW icon and push OK (11)
Select “Storage” and push OK (11). Here you can to delete the figure. Each time OK (11) is pushed, a
see the amount of used and available space on your figure will be deleted.
SD card. Push any button to enter the “Information”
menu. Push the LEFT arrow button (11) to enter the To go back to the “Camera Name” menu without sav-
main menu or MENU (15) to go to Manual Release ing the name, push MENU (15) or use the LEFT/RIGHT
mode. arrow buttons (11) to select the CURVED ARROW
icon and push OK (11). To save the camera's name,
Firmware Version use the LEFT/RIGHT arrow buttons (11) to select the
Select “Firmware Version” and push OK (11). Here DISKETTE icon and then push OK (11). You will auto-
you can see the current firmware installed on your matically enter the “Camera Name” menu. Push the
DTC 1000. Push any button to enter the “Informa- LEFT arrow button (11) to enter the “Information”
tion” menu. Push the LEFT arrow button (11) to en- menu or MENU (15) to go to Manual Release mode.
ter the main menu or MENU (15) to go to Manual
Release mode.
Connecting the Camera
Camera Name
to a Computer
You can give the camera a name that will appear
in the upper right corner of each recorded image or There are two possibilities to transfer your files from
video. Select “Disable” and push OK (11) to disable the DTC 1000 to your PC – either by removing the
the camera name or select “Enable” and push OK SD card and inserting it into an SD card reader or

75

Downloaded from www.Manualslib.com manuals search engine

 connecting the DTC 1000 via USB cable directly to recommended to record some images directly after
your PC. inserting the SD card to verify the camera’s function-
ality. Please make sure that the camera is turned off
Connecting With a USB Cable before inserting or removing the SD card.
Make sure that the camera is turned off before con-
necting it to a computer. Using the USB cable, con-
nect the camera via the USB port (14) to your PC MPEG-4 Visual Patent Portfolio
and then turn the camera on. The camera will be License
recognized as an external drive – you can view your
files directly or copy them to a folder on your PC. This MINOX DTC 1000 is licensed under the MPEG-4
Visual Patent Portfolio License for personal and non-
Transferring Photos and Videos Via SD Card commercial purposes to
Make sure that the camera is turned off before re-
moving the SD card from its slot (9) as this can dam- 1. e ncode video in compliance with the MPEG-4
age your SD card. Insert the card into a card reader standard and/or
and then connect the card reader to your PC or if 2. decode MPEG-4 video that was encoded by a con-
available, insert the card directly into the SD card slot sumer engaged in a personal and non-commercial
if your mobile device. You can view your files directly activity and/or was obtained from a video provider
or copy them to a folder on your PC. licensed to provide MPEG-4 video.
For other purposes, no license is granted or implied
Note: Format your SD card after copying the files to for the MPEG-4 standard.
your PC and before every use – we suggest not to
format the card with the DTC 1000 (see also “For- Further information can be obtained from MPEG LA,
mat” under “Camera Setting”). This procedure de- LLC on http://www.mpegla.com
letes older data from the SD card and prepares your
card for an error-free operation in your camera. It is

76

Downloaded from www.Manualslib.com manuals search engine

 Technical Data
Image sensor . . . . . . . . . . . . . 5 MP hardware resolution, CMOS sensor
Image resolution . . . . . . . . . . . . 8 MP (interpolated), 5 MP, 3 MP (adjustable)
Trigger release . . . . . . . . . . . . . < 1 sec.
Photo burst . . . . . . . . . . . . . . 1 - 3 photos per shutter release (adjustable)
Video resolution . . . . . . . . . . . . 1280x720 HD; 640 x 480 VGA
Video length . . . . . . . . . . . . . . 5 - 60 sec. (adjustable)
High power IR flash . . . . . . . . . . Range > 15 m / 50 ft.
Display . . . . . . . . . . . . . . . . . 2” TFT color display
Day shots . . . . . . . . . . . . . . . Color
Night shots . . . . . . . . . . . . . . Black and white
User friendly interface . . . . . . . . . 6-button control panel
Real-time screen display . . . . . . . . Photo / video playback
Settings . . . . . . . . . . . . . . . . Date, time, temperature, on each image/video
External memory . . . . . . . . . . . . SD/SDHC card with up to 32 GB
Ports . . . . . . . . . . . . . . . . . . USB port, 6 Volt/9 Volt for external power supply (min. 2000 mA)
Cables . . . . . . . . . . . . . . . . . USB cable (included)
Batteries . . . . . . . . . . . . . . . . 12 x 1.5 V AA batteries / Alkaline, Li-Ion or NiMH
Password protection . . . . . . . . . . 4-digit combination
Mounting aid . . . . . . . . . . . . . Strap
Dimensions (H x W x D) . . . . . . . . 101 x 149 x 55 mm / 4 x 5.9 x 2.2 in.
Weight (without batteries) . . . . . . . 406 g / 14.3 oz.
Order number . . . . . . . . . . . . 60701 – DTC 1000 brown

77

Downloaded from www.Manualslib.com manuals search engine

 Warranty Terms 4) T o make a warranty claim, please return the
­M INOX DTC 1000 along with the original re-
With the purchase of the MINOX DTC 1000, you have ceipt and a full description of the defects to the
purchased a product that has been manufactured and ­M INOX customer service or a local MINOX rep-
tested in accordance with particularly stringent qual- resentative.
ity standards. This product is covered by a warranty 5) If necessary, tourists may claim the full warranty
of 2 years from the date of purchase and is subject if the proof of purchase is presented to a MINOX
to the following conditions: representative in the respective country.

1) D
 uring the warranty period, complaints based
on manufacturing defects will be corrected at
the sole discretion of MINOX GmbH by repair,
replacement of defective parts or replaced com-
pletely by an equally flawless product. Further
claims of any kind and regardless of legal rea-
sons in connection with this warranty are ex-
cluded from the warranty terms.
2) Warranty claims are invalid if the defects are due
to improper treatment caused by use of other ac- MINOX GmbH
cessories, intervention by unauthorized persons Walter-Zapp-Str. 4
or workshops, or if the serial number has been D-35578 Wetzlar
manipulated or destroyed. Tel.: +49 (0) 6441 / 917-0
3) Warranty claims can only be made upon presen- Fax: +49 (0) 6441 / 917-612
tation of the original receipt from an authorized eMail: info@ minox.com
dealer. Internet: www.minox.com

78

Downloaded from www.Manualslib.com manuals search engine

 Design subject to alterations without notice.
MINOX is a registered trademark of MINOX GmbH, Wetzlar.

MINOX GmbH
Walter-Zapp-Str. 4
D - 35578 Wetzlar, Germany
Tel.: +49 (0) 6441 / 917-0
Fax: +49 (0) 6441 / 917-612
e-mail: info@ minox.com
www.minox.com 99544 07/13

Downloaded from www.Manualslib.com manuals search engine