Safety Cautions Outer Body Parts 5.

Registration Confirmation Press the [Open Fingerprint

Cover] button on the outer
Multi-leveled Security Code Entry Mode Setting Security Assurance Mode Activation/Deactivation
Success: You can set the security mode suitable for your use when you open the door
Number Pad Unlighted Touch Number Pad Number Pad Lighted
BIOMETRICS
DING DONG DENG body to open the lid of the At-home security mode is to prevent opening of the door from outside while
This section contains important information to ensure the user’s Fail: Fingerprint Reading Panel using a password.
safety and prevent potential damage to property. Please, read DING DONG DING and touch the panel with the
someone is inside.
Warning this section carefully and use the product accordingly. Fingerprint DONG DING DONG
registered fingerprint.
BIOMETRICS

Reading Panel DENG

Security Assurance Mode Security Assurance Mode
BIOMETRICS

Open Fingerprint [Card and Key Tag Registration] DING [7] Button : Multi-leveled Activation Deactivation
• The user shall not install or repair the responsibility for any harm caused BIOMETRICS

Cover Button 3. Placing the Card or Key Tag 4. Confirming Card or Key Tag DONG Security Code Entry

SHS-P718
product without authorization.
BIOMETRICS

by engagement of the lock on an Card Reader

on the Card Reader (from the Registration (from the outside) Mode
BIOMETRICS

BIOMETRICS

improperly closed door. [9] Button : Common Mode DING DONG DING DONG
• Do not install the product in the place outside) DENG DENG DONG
where the gap between the door and the • Please do not hang on the product or Proximity Sensor Briefly press the [Register] Press the [] button after pressing the
DING DONG
frame is 5mm or more. pull it. button on the inner body. [7] or [9] button, and the security mode
DENG
• Make sure that no unauthorized person • B  e sure to correctly match the poles will be set.
has the access to the password. (+/-) when installing the batteries. Install Number Pad While the door is locked, press Pull the inner body
Place the card or key tag to be registered Place the registered card or key
• Do not operate the product with wet the batteries with the correct poles (+/-). Entry Complete/
Silent Mode Switch
Away Security
Setup on the card reader of the outer body. You tag to the card reader on the outer Double Authorization Mode Setting [Security Assurance] button
on the inner body part for 3
handle to open the door,
and it will deactivate.
hands, and keep liquids such as water • Replace all batteries immediately after Button seconds.
Emergency Alert will know the card or key tag has been body.
or drinks away from the product, or they run out of power, and never mix The Double Authorization mode is an enhanced security function with two
the product may malfunction or be Battery Light registered when “DING DONG DENG”
new batteries with used ones. Replacement Double Lock Light sounds. factor authentication in which both password and fingerprint are required
damaged.
Time Alert when opening the door. To set up the Double Authorization mode, at least one Security Assurance Mode Operation
• Do not use water, benzene or alcohol External Power
• Do not use the excessive force or sharp when cleaning the product, as these
Contact Part ●  register multiple cards or key tags, lightly place another card or key tag
To fingerprint has to have already been registered. Rapid beeping
objects to push the lockbuttons, as this Reset Switch to the card reader within 20 seconds after registering the previous card or
BIOMETRICS
fluids can cause product malfunction. DING DONG Or
can damage the product. Warning key tag. Inside: Press the [Security Assurance] button,
Convenient Opening • Make sure that the door is completely
• Replace the batteries within 1 week Inner Body Parts DING
DENG
then the sound for action-unavailable
after the battery replacement alarm willbe heard.
Easy push/pull handle access closed when going outside. The sounds. Deleting Registered Fingerprints & Cards DONG [4] Button : Double
authorization mode on
Outside: Press the [Number Pad] or touch with
manufacturer does not assume the The Battery Cover Release [6] Button : Double
a card, then the sound for action-
Welcome Function Button You can delete individual or all registered fingerprints and cards. authorization mode off
unavailable will be heard.
※ In order to safely use the product, please read “Safety Precautions”.
When a user gets close to the door lock, (After pressing the battery cover
Briefly press the [Register] Press the [] button after pressing the
the authorization standby mode will ※ The features of this product and the contents of the user guide may be changed release button, pull towards the
1. Pressing the [Register] 2. Entering the Current Password
button on the inner body. [4] or [6] button, and the authorization When the security assurance function is activated, the door cannot be
automatically activate. without notice for quality improvement. front, and then the battery cover
Button (from the inside) (from the outside) ●
will open.) mode will be set. unlocked from the outside, so please be careful. Be especially careful not
Warning to allow children to set this mode accidently from the inside.
Silent-Mode Function Product Components Battery Cover 1.5V AA Batteries
DING DONG DING DONG Two-factor Authentication
Mode Operation
When going in or out, the sound of the key DING DING DENG, DING Success:
entering and door opening will be suspended.
The product components used may vary depending on the installation DING DING DONG DENG
environment. Press the [Registration] Enter the current password (‘1234’ after
Fail: DING DONG
DING DONG
Success:
DING DONG DENG Setting the Security Function
Automatic Card Reading Function button for 3 seconds. initialization) when the number pad is Fail: DING DONG
Sound Control Switch DING DONG
When a card touches the reader, Outer Body Mortise Inner Body
lighted, and press the [] button. This is a function to prevent any intrusion while you are out. Should the door
Built-in Wireless Module
the reader will conveniently recognize the card. (Optional) [Deleting Fingerprints] Touching Enter the password when Touch a registered fingerprint be opened from the inside while the intrusion prevention function is on, the
Registration
BIOMETRICS

Auto/Manual 3. Reading the Fingerprint to Be Deleted 4. Exiting Fingerprint [Number the number pad is lighted, on the Fingerprint Reading emergency alert light will flash and the alarm will make “beep beep beep~”
Double Authorization Button Locking Switch Deletion Mode Pad]. and press the [] button. Panel. After a successful sound.
CLOSE Button
Requires fingerprint & password combination to open authentication, the door opens.

Security Assurance Function DING

Success:
DING DONG DENG DING
Sound Setting and Releasing Setting the Security Function Releasing the Security Function
Strike Fail: DONG
When someone is inside the house, (For B2C Only) Strike box DING DONG DING DENG The sound that is generated when the number buttons are pressed, when the
DONG
authorization for entry from the outside
will be prohibited.
Mortise When LED light on the Fingerprint Reading Panel is on, To end the deletion of
door is locked or when the locked door is unlocked, can be set according to
DING DONG
touch the panel with the fingerprint to be deleted. registered fingerprints, please the user’s preference. The product is set to generate all sounds at the factory. DENG
Or

Built-in Fire Detection press the [Registration] button.

[Deleting Cards]
Open the Put the [Sound Control]
Generates alarm in case of a fire
3. Entering the Card Deletion Codes battery cover switch on one of [0], 1. When the door is closed [ ] of the After touching the Number Pad,
Deadbolt on the inner [1], or [2], and close the
Security Function body. battery cover.
outside body’s number pad will light up. have a registered fingerprint read, or
contact a registered card, or enter the
Prevents intrusion from the outside Handle Shaft Spring Latch bolt DING DONG 2. Press and hold the [ ] button on the password and then press the
Key Tag (For B2C Only)

User Manual, Product Warranty DENG - [0] Button: All sounds except the alarm sound are deactivated. outer body for 3 seconds while the door
Handle Shaft, Installation Screws Open-door sensor - [1] and [2] Buttons: All sounds are activated and the sounds get bigger as the is locked. [] button.
‘AA’ Batteries (LR6) (8EA) Installation Manual(For B2C Only)
step become higher.
[Link] GC68-02025A ED:01 When the light on the Number Pad is
2 3 on, press ‘88’ and then the [] button. 7 8 9

Opening the Door from Outside with a Password Opening the Door from Outside with a Card or Key Tag Password Change Welcome Function On/Off Automatic/Manual Locking Setting Alarm Sound (Prank Prevention Function)
When purchased, the product is set to Multi-leveled Security Code Entry The door can be opened from outside using a card or key tag. The password can be 4~12 digits number. Only one password can be The welcome function is a convenient function that automatically activates The Automatic Locking mode allows for automatic locking of the door when This function generates an alarm sound and deactivates lock operation when
Mode initially. Please refer to “Multi-leveled Security Code Entry Mode Place the registered card or key tag on the card reader. registered. the authorization standby mode when a user approaches the door, even it is closed. it is improperly handled from the outside.
setting” for Common Mode setting. 1. Pressing the [Register] Button 2. Entering the Current Password before touching the number pad. Open the Set the [Automatic/Manual This alarm will sound if an attempt is made to open the door with an invalid card, or
Placing the Card or Key Tag
※S  ilent Mode on the Card Reader (from the inside) (from the outside) battery cover Locking] toggle switch of if a wrong password is entered five times in a row.
Before entering the password, press the [] button and enter the on the inner the Inner Body to the ‘A’/‘M’ The alarm sound is generated, and the lock is deactivated for 3 minutes. While the
BIOMETRICS

Place the card or key tag on

password, then both the sound of the key entering and the door opening the card reader. DINGDONG DING DONG body. position. door is in this inactive mode, a single “DING” sound is generated every 10 seconds
will be suspended. It is a useful function if you do not want to disturb Success:
DING DING DONG and seven consecutive “DINGS” will sound after 3 minutes. Following this, the lock
neighbors when you go in and out at night.
DING DONG DENG The door will be opened after DENG, DING
Fail: DONG DENG - Automatic: The door is automatically locked 1 seconds after being closed. is released from inactive mode.)
DING DONG DING
1 second. DING
1. Multi-leveled Security Code Entry Mode Open the battery cover of the Enter the current password (‘1234’ after - Manual: The door does not lock automatically, and [CLOSE] button must be
DONG Releasing the Alarm
inner body and briefly press the initialization) when the number pad is pressed from the inside, touch [Number Pad] to close the door.
[Register] button. lighted, and press the [] button. Open the battery [1]+[] button: Welcome function on, the one- Inside Press the [Register] button.
Success:
Opening the Door from the Inside 3. Entering a New Password 4. Entering a New Password (from
cover and press
[Registration] button
minute alarm function on Replacing the Batteries
DING DONG DENG [2]+[] button: Welcome function on, the one- Outside Get a registered fingerprint or a registered card authorized or
Fail: Opening by Pulling the Inner Handle (from the outside) the outside) briefly. minute alarm function off Battery Replacement Alarm Generation enter the password and then press the [] button.
DING DONG DING [3]+[] button: Welcome function off If the melody of “Blues for Elise” sounds when opening the door with the
DONG
Touching [Number When two arbitrary buttons When the numbers on the ● Please be careful not to trap
your hand during use.
DING DING DING DONG
On and Off / Function Description
password or fingerprint or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Built-in Fire Detection Function
Pad] will light up are lighted, press the buttons number pad are lighted, enter Warning
DENG
the number pad. in order. the password and press the - Welcome function on: The mode will automatically activate the authorization Replacing the Battery This function generates the alarm sound when fire is detected so that the
[] button. Enter the new password (4 to 12 Enter the new password again standby mode when a user approaches the door lock. Replace all 8 batteries within a 1 week of the first alarm sound.
digits) and press the [] button. to check if the new password is - Welcome function off: The mode will authorize a user when the user enters the residence can quickly respond. The built-in fire detection function is a basic
2. Common Mode - The unit will stop operating suddenly if the batteries are not replaced.
accurately configured, and then press password on the number pad or connects a card to the number pad. function of the lock, and cannot be released by the user.
the [] button. - One-minute alarm function on/ off: When someone remains in front of the door ● Depending on battery manufacturer, date of manufacture and the user Fire detection function is operational at about 75 ℃ ± 10 ℃; this can vary
5. Checking New Password Operation (from the outside) lock for more than a minute, this mode will sound the tamper prevention alarm. environment, the duration of use may vary.
Closing the Door from the Inside To make sure the password has been properly registered, check the new Warning
(In the case of average use, given as 10 times a day, 8 AA alkaline depending on the installation environment.
Success: T
 he factory defaults are set with the welcome function on and the alarm 1.5Vbatteries can last for 12 months.)
password and close the door.
●
When fire occurs, the temperature sensor detects it and flashes the
DING DONG DENG Automatic The door is automatically locked 1 seconds after the door is function off. ● If the poles of the batteries are not placed properly, the lock will not operate
Fail: Locking Setting closed. ●T
 he working distance of the infrared sensor can differ depending on light normally. [Close] button while generating the alarm sound.
DING DONG DING ● M
 anage your password with care so that unauthorized people will not have Caution conditions and other environments. When the front door is exposed to sun ● L iquid leaks from batteries can damage the product. Check the batteries The door is automatically opened after the alarm sound has stopped.
DONG access to it. Regularly changing your password can reduce the risk of it regularly (every 6 months).
Manual The door is locked when the being leaked.
light or constant bright lights it is advised to limit the usage of the sensor (The lock resumes normal operation if the inside temperature returns to
Touching [Number Pad] will light Enter the password when the number [Close] button is pressed Warning as it might sound the alarm. ● After the battery replacement alarm has sounded, password/fingerprint/card
Locking Setting information cannot be registered, changed, deleted, initialized or configured a normal level.)
up the number pad. pad is lighted, and press the [] button.
The built-in fire detection function is activated when the temperature rises
Fingerprint, Card and Key Tag Registration Door Lock Time Setup Function until the batteries are replaced.
around 60°C, which may differ depending on the installation environment.
● P
 assword must be entered after the light is on, and if does not, touch ●  o check if the door is locked from the inside, press the security button
T
You can register and use up to 100 fingerprints. This function sets the time interval between the moment the door open/ Using the Emergency Battery
Note
●
[Number Pad] and re-enter.
To
 cancel, press [ ] button and re-enter.
briefly; the red LED will flash if the door is locked and the blue LED will blink if
the door is unlocked. Up to 20 cards, including the key tag, can be registered. closed sensor recognizes the door as closed and the moment deadbolt locks Product Specifications
If the password is wrong 5 times, “peep” warning alarm will sound Note If the batteries are not replaced after their replacement time comes, they will
●
(Only ISO14443 A Type is available.) the door. Item Specifications
20 times and the system will shut-down for about 3 minutes. When
In an environment that the door closes slowly and the deadbolt jams before be completely discharged and the lock will not operate.
malfunction happens, “beep” will sound every 10 seconds, and stop mode
will be turned off automatically after 3 minutes with multiple ‘beeps’.
Initialization (Password, Card, Key Tag) 1. Pressing the [Register]
Button (from the inside)
2. Entering the Current Password
(from the outside) the door is fully closed, the situation can be fixed by adjusting the door lock Voltage AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
time. Opening the Door Using an Emergency Battery
All registered data (password, card, key tag) are deleted. After initialization, Emergency
Opening the Door from the Outside with the password is set to ‘1234’, and the registered card, key tag data are DING DONG Default: 1 second Purchase an emergency battery (9V) at the nearest store.
Power 9V Battery (6LF22) (Separately sold)
DINGDONG - As the alkaline batteries offer longer life, they are recommended
a Fingerprint erased. Please register a new password after initialization. DENG, DING
DING
DING
[51] : 1 second
over the manganese batteries or rechargeable ones.
Source
DONG
Open the door from the outside using the fingerprint authentication system. 1. Pressing the [Register] 2. Entering the Numbers for [59] : 9 second Operation Electronic Control Method (Password entry or fingerprint
Button (from the inside) Initialization (from the outside) Open the battery cover of Enter the current password (‘1234’ after
Touch the sensor properly with the fingerprint part of your finger which has the inner body and briefly initialization) when the number pad is Method or card or key tag reading)
been registered. press the [Register] button. lighted, and press the [] button. Open the battery cover
of the inner body Weight 3.9 kg (including both inner and outer bodies)
1. Pressing [Open Fingerprint 2. Reading Fingerprint DING DONG [Fingerprint Registration] Press [51] ~ [59] button,
Cover] Button and briefly press the and then press [] button. Outer Body
DING DING 3. Reading the Fingerprint to Be Registered 4. Exiting Fingerprint [Register] button.
DING DING (including the 85mm(W) × 387mm(H) × 61mm(D)
Success: Registration Mode
BIOMETRICS
DING DONG DENG
Fail:
DING DING
Success:
Intrusion Detection Function Product
Dimensions
handle)
Inner Body
~

DING DONG DING DONG Press and hold the [Register] When the number pad is lighted, enter DING DING DONG DENG DING
Touch the Fingerprint Reading Panel Fail: DONG This function generates the alarm sound when an attempt is made to (including the 86mm(W) × 354.8mm(H) × 63 mm(D)
button for 5 seconds. ‘4560852580’ and then press the [] DING DONG DING DENG handle)
with the registered fingerprint after forcefully open the door from the inside or the outside. While connecting a 9V battery to the External Power (Emergency
Press the [Open Fingerprint button. DONG
LED light turns on, the lid of the panel When LED light on the Fingerprint Reading Panel is on, To end the registration, (This is a basic function of the lock, and cannot be separately set or released.) Battery) Contact Part on the outer body, have a registered fingerprint
Cover] button and the lid of the - Success: DING DONG DENG ●T
 he contents of this user guide are subject to change without prior
closes in approximately a second touch the panel with the fingerprint to be registered. please press the read or enter the password.
Fingerprint Reading Panel opens. later. Then push the door handle to - Fail: DING DONG DING DONG If the door is forcefully opened while locked, the door opening sensor detects notice to the user in order to enhance performance of the product.
When a “ding” sound is heard and LED light goes off, [Registration] button on the
open the door. 4 5 then remove the finger. (Must do it 3 times) inner body. 6 it and generates the alarm sound. 10 11 12
~
~

Downloaded from [Link] manuals search engine

 安全注意事项 室外锁体名称 5.登记确认 设定双重认证模式 室内安心模式设定/取消
从室外按锁体上的[打开指纹
成功:
背景灯熄灭 密码触屏 背景灯亮起 BIOMETRICS

DING DONG DENG

盒]按键，在指纹识别盒盖打开 双重认证模式指开门时须经过输入密码、认定指纹后方可开启房门的 室内安心模式，户主在家时防止他人从外部开启房门时使用。
失败: 后将指纹放在识别部分。 强化保安功能。设置双重认证模式时，至少需要一个以上已经登记过
为保证用户安全，避免给用户带来财产损失及使用不便，请务必
DING DONG DING
仔细阅读以下内容后正确使用本产品。
BIOMETRICS

指纹识别盒盖 的指纹。
Warning BIOMETRICS
DONG 设置室内安心模式 取消室内安心模式
[注册卡、Key Tag]
打开指纹盒按键 DING DONG
3. 接触卡、Key Tag （从室外） 4. 接触卡、Key Tag（从室外）

SHS-P718
• 禁止用户任意安装或修理本产品。 • 禁止用力下坠或用力拉本产品。 DENG
电子卡感应区
BIOMETRICS

BIOMETRICS

DING [4]号: 设定双重认证模式

•安
 装时，门与门框之间的间距不能超 •请
 按照电池正负极 (+/-)，正确安装
BIOMETRICS
BIOMETRICS
DONG [6]号: 解除双重认证模式
DING DONG DENG DING DONG DENG DING DONG DENG DONG
过5mm以上。 电池。 接近识别感应
•请
 小心管理密码，并定期更换密码， •电
 池寿命已尽时，请同时更换所有的电
将要注册的卡、Key Tag放到感应区， 注册过的卡、Key Tag放在感应区 短按室内侧锁体的[设定]键。 按下[4]或[6]号键, 再按下[]键，
以免他人知道。 池，禁止新旧电池混合使用。 号码键盘
随“DING DONG DENG”的声音完成注册。 1~5秒内锁会开启。 即可设定解除认证模式。
在房门上锁的情况下，在室 在室内一侧拉动 把手
 止用湿手操作本产品，防止水、饮料 • 请使用柔软的布清洁锁体，禁止使用
•禁 输入结束/转换礼仪 外出防盗设置
内一侧按住[安心]按键持续 打开房门，安心模式自
等液体进入锁体内部。 水、苯、酒精擦拭本产品。 模式键 ● 想注册多张开门卡时，先注册好使用中的卡，后在20 秒内一次 双重认证模式 3秒。 动解除。
报警灯
•禁
 止过度用力或用尖锐的器具按电子 •产
 生电池更换警报音后，请务必在一周 将剩余的几长卡放到感应区，如操作过程中间隔20 秒以上会自 成功:DING DONG DENG
提示更换电池 双锁灯 Warning 成功:
动终止。 失败:DING DONG DING
锁的按键。 之内及时更换新电池。 外部电源接触 DING DONG DENG DONG
DONG
失败:
使用室内安心模式
• 外出时请务必确认门是否完全上锁。 复位键
BIOMETRICS
DING DONG DING DONG
蜂鸣音
室内侧锁体名称 删除指纹 & 门卡
άॆԅࢗਪֺ಴ ※ 为保证使用安全，请务必在使用前仔细阅读“安全注意事项”。 触摸号码键 号码键盘的背光灯全部亮 在[指纹识别部分]上识别指 或 室内: 按[安心]键，门锁发出警提示音。
֓᥋ⱘ3XVK3XOOᓔ䮼ᮍᓣ ※ 本公司保留改进产品权利，产品性能及说明如有变更，恕不另行通知。 可以个别删除已经登记的指纹或全部登记门卡。 盘处。 起时，输入密码后按下 纹。认证成功后打开房门。 室外: 触摸[数字键盘]或刷卡时门锁发出
开启电池盖按键 []键即可。 警告提示音。
࿲οٟટ （按下电池盖开启按键后， 1.按[设定]键 （从室内） 2.输入密码（从室外）
⫼᠋᥹䖥䮼䫕ᯊ㞾ࡼ䕀ЎᎹ԰⢊ᗕDŽ 向后拉动盒盖打卡电池盒）
设定及解除声音模式
使用前须知 DING DONG → ● 室内安心模式下，房门无法从室外打开，请小心使用。

़ྮٟટ DING DING
DING DONG DENG,
本产品可以设定按号码键盘、开门或关门时的声音。 Warning 应特别注意请勿让儿童在室内设置此模式。
DING DING
ߎܹᯊৃ䕀Ў䴭䷇⢊ᗕDŽ 因安装的环境不同，产品零部件会有差异。 电池盖 1.5V AA Batteries
ּ࢕ᆑՎಭιٟટ 按[登记]键3秒。 输入密码（当前密码）后按 []键。
᠓व᥹㾺ᅲ⦄㞾ࡼ䆚߿ˈㅔऩᮍ֓DŽ
室外侧锁体 锁芯总成 室内侧锁体
[指纹删除] 打开室内侧锁
体电池盖。
将[音量调节]开关置于
[0] ~ [2] 位置，盖好
设定防盗功能
ഀᄷఊᄃٟટ 3.识别需要删除的指纹 4. 结束指纹删除 电池盖。
ᣛ㒍ǃᆚⷕ䞡໡䅸䆕
BIOMETRICS

音量调节开关 在用户外出时防止外部入侵的功能，室内设置后，意外情况发生时
无线模块装置（选项）
- [0]键: 所有的声音为静音状态。(警报音除外)
鸣笛报警。
೉ઝ̝໯ٟટ 设定键 自动/手动锁门 DING
成功:
DING DONG
DENG - [1]~[2]键: 所有的声音都开启，设定的数字越大声音越响。 在设置防盗功能的情况下，如房门从外部被打开，警报灯将闪烁，
⫼᠋ሙᆊᯊˈᇚߛᮁ໪䚼䆚߿ࡳ㛑DŽ 转换开关 DING DONG DENG 同时持续5分钟鸣笛报警。
[CLOSE]键 失败:
盖板
‫ݥ‬ၹ‫ث‬࿫ٟટ (B2C专用) 锁舌盒 DING DONG DING
设定自动/手动锁门
‫ݙ‬㺙☿♒ᛳᑨ఼
DONG 设定防盗功能 解除防盗功能
打开指纹识别器的盒盖，触屏灯亮后用需要删除 需要结束指纹删除过程时， 本产品可设定关门时自动锁门的功能。
ֽԂٟટ 的指纹接触[指纹识别部分]。 按[登记]按键。
໪ߎᯊਃࡼ䰆ⲫࡳ㛑 锁芯总成 (MORTISE) [删除门卡]
DING DONG
DENG
或
将室内侧锁体的[自动/手动
3.输入需要删除门卡编码。 打开室内侧锁 锁门]转换开关
体电池盖。 推至[自动/手动]置。
迷你卡(B2C专用) 连接杆扣环 1. 若门上锁，室外侧号码键盘的 触及密码输入屏幕后进行指纹识别或
使用说明书, 產品保修 连接杆扣环, 安装螺丝 方舌 DING DONG DENG [ ]键会亮起背光灯。 刷卡，或输入密码后按[]键。
‘AA’电池(LR6)(8EA) 安装菜单(B2C专用) - 自动模式: 关门1 秒后自动上锁。但电池没电时不可正常工作。 2. 在
 3 秒以内按下[ ]键，
斜舌 - 手动模式: 关
 门后不会自动锁门，需按下室内侧锁体的[CLOSE]键室外侧锁体 仅可设定防盗功能。
感应器 的[号码输入]键方可锁门。
密码盘灯亮时按“88”后按[]键。
[Link] GC68-02025A ED:01
2 3 7 8 9

从室外开门(密码) 从室外开门(电子卡、迷你卡) 更改密码 设定双重安全模式 入侵感知功能 发出警报音时 (防恶作剧功能)

初始设置为双重安全模式，如果想设置为一般模式的话，请参考普 从室外使用电子卡或迷你卡即可开门。请将已设定的电子卡、迷你 密码可注册4~12位的一组，可注册一个密码，初始化操作后请重新 使用密码开门时，可根据适用性设定认证模式。
在室内或室外，强制打开门时发出警报音的功能。 在室外操作电子锁不正确时，电子锁有发出警报音并自动进入断电
通模式设定方法 卡正确地置于电子卡感应区。 注册密码。
DING DONG (此功能为产品基本功能，不可设定/删除。) 模式。
※ 礼仪模式 接触卡、Key Tag 1. 按[设定]键（从室内） 2. 输入密码（从室外） DENG
在门上锁的情况下强制开门时，电子锁的感应器会感知， 使用未设定的卡或密码输入错误超过5次时
输密码前，先按[]键在输入密码，门锁将不发出“插入钥匙”，
BIOMETRICS

DING (电子锁会发出警报音并会自动停止工作3 分钟。电子锁在停止工作状态下，

将电子卡或迷你卡置于电子卡 DONG [7] 键: 双重安全模式 电子锁会发出警报音。
“已开门”等提示音。 成功:
DINGDONG
DING DONG DENG,
[9] 键: 普通模式 每隔10 秒钟发出“DING”的声音。3 分钟之后电子锁会发出“DINGS”的声音并自
DING DONG DENG 感应区。 DING DING 动恢复工作。)
夜间出入静音功能。 失败: 稍候1 秒钟门即会打开。
1. 双重安全模式 DING DONG DING 短按室内侧锁体的[设定]键。 按下[7] 或[9] 键后，按下[]键即可 更换电池 警报音的解除方法
DONG 按一下室内侧锁体（打开电池盖） 输入当前密码（初始化后输入1234）后按 设定认证模式。 从室内 按下室内侧锁体的[CLOSE]键或[设定]键，
的[设定]键。 []键。 更换电池的提示音响起时...
或者把手向下拉即可解除。
成功: 从室内开门 使用密码或电子卡(迷你卡)开门响起“致爱丽丝”旋律时，开门后需更换电
DING DONG DENG
失败:
3. 输入新密码（从室外） 4. 再次输入新密码（从室外） 迎宾功能设定/解除 池。(若更换电池的提示音响起，号码键盘右下侧的电池交换提示背光灯会 从室外 在识别已经登记的指纹、刷卡、输入密码后按[]键。
DING DONG DING
拉动内侧把手开门
迎宾功能指在用户接近门锁时，即使未接触到密码触屏，门锁也会 亮起。)
DONG
DING DING DING DONG DENG 更换电池
自动转入工作认证形态的一种便利功能。
触摸号码键盘处， 任意2 个键的背光灯亮起 号码键盘的背光灯全部亮起
号码键盘的背光灯 时，按顺序按下亮起背光灯 时，输入密码后按下[]键 ● 在使用时，请小心不 从第一次响起更换电池的提示音后，一周内必须将旧电池全部更换成新电池。 火灾感知功能
会亮起。 的2 个数字。 即可。 Warning 要夹手。 输新密码（4~12 位）后按 []键。 为证实输入新密码的准确性，再次输入 ● 电池因生产厂家、生产日期、使用环境不同，使用时间存在差异。

新密码后按 []键完成注册。
（AA型号1.5福电池8只，按每日开关门10次标准计算，可使用12个
发生火灾时电子锁会发出警报，告知住户赶快躲避的功能。
DING DONG DING DONG
2. 普通模式 5. 用新密码确认开启（从室外） Warning (火灾探测功能为基本设定的功能，用户不可随意解除。)
DENG 月）
密码是否被正常注册，关门之前请用新密码测试确认后再关门。 ● 更
 换电池的警示音响后，不更换电池继续使用时，可能会产生 温度升至75℃±10℃时自动开启火灾报警功能，根据环境设置不同
成功: 从室内关门 打开电池盒后盖，轻按[登陆]
按键。
[1]+[] 按钮 : 设
 置迎宾功能，设置 电子锁突然停止工作的情况。
● 电
 池液体泄漏时会损坏锁体，请务必定期（约6 个月间隔）进
可能略有差异。
DING DONG DENG 1分钟报警功能 火灾发生时, 温度探测器会感知, 然后[CLOSE]键不停闪烁, 同时电子锁发出警报音。
失败: ●注
 意管理密码，别泄漏给他人，一组密码不宜使用过长时间。 [2]+[] 按钮 : 设置迎宾功能，解除 行确认。 警报音结束后门会自动打开。
DING DONG DING DONG 设定自动锁门 关门1 秒后自动上锁。 1分钟报警功能 更换电池的提示音响后，在更换新电池之前，无法执行密码/
●  (室内温度下降到一定程度后，电子锁会恢复正常工作。)
Warning
[3]+[] 按钮 : 解除迎宾功能 感应钥匙信息的设定、更改、初始化和功能设定等。 火灾感知功能在室内温度达到60℃ 左右时启动，安装环境不同会多少有差异。
触摸号码键盘处，号码键盘的背 号码键盘的背光灯全部亮起时，输入密 按[CLOSE]键或者旋转手动开
光灯会亮起。 码后按下[]键即可。 设定手动锁门 设置及解除/ 功能说明
关装置即可进行锁门。
指纹、注册卡、Key Tag - 设置迎宾功能：用户接近门锁时自动转换为认证状态。
● 应在号码键盘背光灯亮起时输入密码；背光灯熄灭时，请触

摸号码键盘处，背景灯亮起时重新输入。 最多可登记、使用100个指纹。
- 解除迎宾功能：触摸密码屏幕或对准读卡器刷卡认证模式。 应急电池的使用方法 产品规格
● 如果想在室内检查锁门状态，轻按放心按钮，如果门已上锁， - 1分钟警报功能设置/解除：在门锁钱停留一分钟以上时鸣笛报警模式。
Note ● 若输入密码错误须取消时，应按一下[ ]键再重新输入。 具有交通卡功能的信用卡就可以注册，包括Key Tag最多可注册20张。
亮红灯提示，如门未上锁，亮蓝灯提示。 到了电池更换日期不更换继续使用时，电池会没电导致门锁不能 项目 规格
● 连续5 次输错密码时，锁体会发出20 次“Beep”的提示 Note （只兼容 ISO14443 A型号芯片） 出厂设置为迎宾模式，警报功能解除。
音，同时电子锁会自动停止工作3分钟。电子锁在停止工作
●
正常工作。
状态下，每隔10 秒钟发出“beep”的声音。 1. 按[设定]键 （从室内） 2. 输入密码（从室外） ● 红外线传感器及阳.光紫外线作用下可能导致距离功能发生改变。 正常电源 AA型1.5 V 碱性电池(LR6) 8 节(6 V)
Warning
3 分钟之后电子锁会发出“哔哔哔哔哔哔哔”的声音并自动 初始化方法 (密码、电子卡、迷你卡) 曝光走廊内部及使用长明灯照明情况容易误导警报发生，切勿
使用备用电池开门
使用。
恢复工作。 DING DONG DENG, 应急电源 9 V电池(6LF22) 1节(单独购买)
初始化会删除设定的所有信息。设定的信息初始化之后，密码自动 DINGDONG 请到附近的便利店或超市购买应急电池(9V)。
DING DING
室外指纹开锁 设定为“1234”，电子卡、迷你卡的信息自动删除。 设置关门时间功能 - 建议使用比普通电池和充电电池工作寿命长、可长期使用的碱
工作方式 电子控制方式 (输入密码或电子卡、迷你卡、指纹)
性电池。
在室外利用指纹打开房门。 用已经登记过指纹的手指准确地接触 1.按[设定]键(从室内) 2.输入初始化号码(从室外) 打开电池盖按一下[设定]键。 输入密码（当前密码）后按 []键。 门敞开时，设置门栓上锁时间的功能。
重量 3.9 kg (包括室内侧和室外侧)
指纹识别部分。 [指纹登记] 当门徐徐关上时，门栓易被卡住，设置门栓弹出时间将可能改善上
DINGDONG 3.识别将要登记的指纹 4.结束指纹登记 述不便现象。 室外侧
1.[打开指纹盒]按键 2.识别指纹 DING DING 85mm(W) × 387mm(H) × 61mm(D)
(包含把手)
DING DING 初始值：1秒 产品大小
DING DING 成功: [51] : 1秒 室内侧
DING DONG 86mm(W) × 354.8mm(H) × 63 mm(D)
~

BIOMETRICS
成功: DING DING DONG DENG DING DONG
DING DONG DENG DENG (包含把手)
失败:
失败: 持续按[设定]键5秒钟。 号码键盘的背光灯亮起后输 [59] : 9秒
DING DONG DING
DING DONG DING DONG 入“4560852580”，再按下[]键即可 。 DONG
按[打开指纹盒]键后，指纹识别 指纹识别触屏亮灯时用指纹接触识别部 - 成功: 发出“DING DONG DENG”提示音 指示灯亮时用将要登记的指纹接触指纹识别器。 如果需要结束登记， 按一下室内侧锁体（打开电池盖） 按[51 ~ [59]键后，按 []键。 在室外一侧的锁体外部电源（备用电池）接触部分放入9V干电池后， ●为
 提高产品的功能，生产商可不经过用户的同意对使用说明书的内
部分盒盖自动打开。 分1秒钟，之后关闭指纹识别盒。转动 - 失败: 发出“DING DONG DING DONG” 听到“叮”的声音，待指示灯灭后收回手指。 请从房门内侧按锁体上的 的[设定]键。 方可进行指纹识别、刷卡、输入密码。 容作出更改。
门把手开门。 提示音 （反复识别三次） [登记]按键。
4 5 6 10 11 12
~

Downloaded from [Link] manuals search engine