Printed Page: 1 of 2 

Subject Code: KEC401

0Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0

BTECH
(SEM IV) THEORY EXAMINATION 2021-22
COMMUNICATION ENGINEERING
 
Time: 3 Hours Total Marks: 100
Note: Attempt all Sections. If you require any missing data, then choose suitably.

SECTION A

1. Attempt all questions in brief. 2*10 = 20

Qno Questions CO
(a) Define the bandwidth of a system and compare the bandwidth of DSB- 1
C, DSB-SC and SSB-SC.
(b) Illustrate transmission efficiency of DSB-C, DSB-SC, and SSB-SC. 1
(c) Define Phase modulation and draw its output waveform. 2
(d) Illustrate the concept of Carson’s rule for BW calculation. 2
(e) Define Noise Factor for a system. 3
(f) Interpret the noise performance of an amplitude modulated wave in 3
terms of noise figure.
(g) Elaborate the term TDM with example. 4
90

2
(h) Find Nyquist rate & Interval for signal: x(t) = 4sin(30πt) +3cos(70πt). 4

13
(i) Discuss the reason why non-coherent demodulation is not possible for 5
_2

2.
BPSK.
P2

24
(j) Explain and draw the signal space diagram for FSK. 5
2E

5.
.5
P2

SECTION B
17
Q

2. Attempt any three of the following: 10*3 = 30

|1

Qno Questions CO
5

(a) Illustrate the idea of having modulation index for an AM signal equal 1
0

to 1, greater than 1, and less than 1.

2:

(b) Demonstrate Frequency Modulation technique with its expression and 2

:3

output.
13

(c) Explain the properties of Probability Density function and Cumulative 3

2

Distribution Function.
02

(d) Explain the following in reference to the delta modulation (DM). 4

a. Granular Noise and b. Slope overload
-2

Provide the quantization noise for the DM with a step size Δ (Delta).
08

(e) Illustrate the Modulator and Demodulator for Amplitude Shift Keying. 5
6-
|0

SECTION C
3. Attempt any one part of the following: 10*1 = 10
Qno Questions CO
(a) Draw and explain the modulator and demodulator of DSB-SC. 1
(b) Find out the Continuous time Fourier transform of rectangular pulse. 1
Also draw the magnitude spectrum of the output.

QP22EP2_290 | 06-08-2022 [Link] | [Link]

 Printed Page: 2 of 2 
Subject Code: KEC401
0Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0

BTECH
(SEM IV) THEORY EXAMINATION 2021-22
COMMUNICATION ENGINEERING
 
4. Attempt any one part of the following: 10 *1 = 10
Qno Questions CO
(a) Demonstrate Phase Modulation with mathematical expression and its 2
output.
(b) Derive and explain Narrow Band Frequency Modulation with FM 2
generator.

5. Attempt any one part of the following: 10*1 = 10

Qno Questions CO
(a) Illustrate the Noise factor for coherent demodulation of a DSB-SC 3
signaling.
(b) Illustrate the relation between the transfer function of Pre-emphasis 3
and De-emphasis for frequency modulation.

6. Attempt any one part of the following: 10*1 = 10

90

2
Qno Questions CO

13
_2

(a) Evaluate the sampling theorem for a low pass analog message signal with an 4

2.
explanation of the mathematical expression for the sampling process.
P2

24
(b) Draw and explain the block diagram of transmitter, channel and receiver of 4
2E

PCM system.

5.
.5
P2

17
7. Attempt any one part of the following: 10*1 = 10
Q

|1

Qno Questions CO
(a) Illustrate the concept of QPSK with its modulator and demodulator. 5
5

Also draw the signal space diagram for the QPSK.

0
2:

(b) Illustrate the concept of MSK with its modulator and demodulator. 5
:3

Also draw the signal space diagram for the MSK.

13
2
02
-2
08
6-
|0

QP22EP2_290 | 06-08-2022 [Link] | [Link]