0% found this document useful (0 votes)
150 views1 page

Product Data Sheet: Dehnguard® S DG S 48 FM (952 098)

The document describes a surge arrester product. It is a multi-purpose surge arrester consisting of a base element and a plug-in protection module. It has a high discharge capacity and reliability due to monitoring. The document provides details on the product specifications and dimensions.

Uploaded by

peewee7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
150 views1 page

Product Data Sheet: Dehnguard® S DG S 48 FM (952 098)

The document describes a surge arrester product. It is a multi-purpose surge arrester consisting of a base element and a plug-in protection module. It has a high discharge capacity and reliability due to monitoring. The document provides details on the product specifications and dimensions.

Uploaded by

peewee7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product Data Sheet: DEHNguard® S

DG S 48 FM (952 098)
■ Multi-purpose surge arrester consisting of a base element and a plug-in protection module
■ High discharge capacity due to heavy-duty zinc oxide varistor
■ High reliability due to "Thermo Dynamic Control" SPD monitoring device

Figure without obligation

Basic circuit diagram DG S 48 FM Dimension drawing DG S 48 FM


Pluggable single-pole surge arrester consisting of a base part and a plug-in protection module; with floating remote signalling contact.
Type DG S 48 FM  
Part No. 952 098  
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II   
Energy coordination with terminal equipment (≤ 10 m) type 2 + type 3   
Nominal voltage (a.c.) (UN) 42 V (50 / 60 Hz)   
Max. continuous operating voltage (a.c.) (UC) 48V (50 / 60 Hz)   
Max. continuous operating voltage (d.c.) (UC) 60 V  
Nominal discharge current (8/20 µs) (In) 7.5 kA  
Max. discharge current (8/20 µs) (Imax) 25 kA  
Voltage protection level (UP) ≤ 0.33 kV  
Response time (tA) ≤ 25 ns  
Max. mains-side overcurrent protection 125 A gG  
Short-circuit withstand capability for max. mains-side overcurrent
protection (ISCCR) 50 kArms  
Temporary overvoltage (TOV) (UT) – Characteristic 70 V / 5 sec. – withstand   
Temporary overvoltage (TOV) (UT) – Characteristic 90 V / 120 min. – safe failure   
Operating temperature range (TU) -40 °C ... +80 °C   
Operating state / fault indication green / red   
Number of ports 1   
2
Cross-sectional area (min.) 1.5 mm solid / flexible   
2 2
Cross-sectional area (max.) 35 mm stranded / 25 mm flexible   
For mounting on 35 mm DIN rails acc. to EN 60715   
Enclosure material thermoplastic, red, UL 94 V-0   
Place of installation indoor installation   
Degree of protection IP 20   
Capacity 1 module(s), DIN 43880  
Type of remote signalling contact changeover contact   
Switching capacity (a.c.) 250 V / 0.5 A   
Switching capacity (d.c.) 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A   
2
Cross-sectional area for remote signalling terminals max. 1.5 mm solid / flexible   
Weight 123 g  
Customs tariff number (Comb. Nomenclature EU) 85363030  
GTIN 4013364119475  
PU 1 pc(s)  

We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

© DEHN + SÖHNE GmbH + Co. KG · Hans-Dehn-Str. 1 · Postfach 1640 · D-92306 Neumarkt · Tel. +499181 906-0 · [Link]

3, te
s ted
: Tested +: New (: Discontinued Model

You might also like