2.

Features
u Supporting Wi-Fi intranet or extranet connection: It can be used as a single product or networking
[Multi-product] to be controlled.
(YET404PC - Four channel wireless intellect receiving control) Supporting Smart Link network technology: Network configuration is simple and convenient.

V1.0
u 315mhz/433mhz optional
User Manual
u Only working with learning code (1527 and 2262)

u High confidentiality,stable characteristics,low power consume and easy to operate,plug and play.
CONTENT
1 Summarize.............................................................................................. 1

2 Features ................................................................................................ 2 3. Technical parameters

3 Technical parameters ................................................................... 2
DC12V
4 Operating instruction ................................................................. 3 Input Voltage

4.1 Mode declaration ................................................................................ 3 <10A

Contact current
4.2 Remote control function ............................................................ 4
IEEE802.11b/g/n
4.3 Remote control ................................................................................. 4 Wireless standard
4.3.1 APP(APPlication) download and installation ................. 4 2.4G ～2.5G(2400M ～2483.5M)Hz/433/315
4.3.2 APP user registration and login ............................... 4 Working frequency

4.3.3 APP user manual............................................................... 6 WEP/TKIP/AES

Encryption type
4.3.4 One key to net in ........................................................................ 7
WPA/WPA2
4.3.5 The main control page ............................................................ 8 Security mechanism
5 FAQ .................................................................................................. 8 802.11 b: -91 dbm (11 Mbps)
Receiving sensitivity 802.11 g: -75 dbm (54 Mbps)
433/315 :-112 dbm
<100mA
Static working current
Temperature：-40℃ ～ +80℃
Working environment Humidity：20% ～ 93%
1. Summarize Temperature：-20℃ ～ +70℃
Storage environment Humidity：20% ～ 93%
YET404PC-WIFI(Four channel wireless intellect receiving control)is a dual system controller
with RF & and wi fiwhat can provide switch signal to the fourth relays,so it can meet many <10
requirements such as: control motor's corotation and reversal;the connection and lock of the Controller capacity
switch and other special control [Link] kind of wireless intellect receiving control mainly
128*79*31.5mm
APPly to auto door,curtain,lifting APPliance,gate way,lifter,industrial control and security field.
Dimension

1/8 2/8

Downloaded from [Link] manuals search engine

 4.2 Operating Instruction

4. Operating Instruction Ψ Methods and steps for learning

u Press the learning button on the controller and then release it after LED lamp is lit and the controller
enters into the learning [Link] that,press any corresponding button on remote [Link] LED
lamp on the controller flashes for 3 times and then is off, it indicates that the learning is success.
UP
Ψ Methods and steps for clearing code
u Long press the learning button (more than 5S) until LED lamp is off
DOWN
Controller

M
S
4.3 Mobile Control

4.3.1 APP(APPlication) download and installation

K1 K2 K3 K4 Ψ Android
1 2 3 4 5 6 7 8 9 10 11 12 u Domestic users: users can search through the "APP store-360 handset assistant" platform to
search for keywords: "YET" and "Safemate", download the latest version of "safemate" software,
and press the instructions to complete the installation of the APP
DC- DC+ u Foreign users: users can search through the "Google Play" platform to search for keywords:
COM

COM

COM

COM

"YET" and "Safemate", download the latest version of "safemate" software, and press the
NO

NO

NO

NO
NC

NC

NC

NC

instructions to complete the installation of the APP;

4.1 Mode Declaration Ψ iOS system：Users at home and abroad can search through the "APP Store" platform to search
for keywords: "YET", "Safemate", download the latest version of "Safemate" software, and press the
u Momentary: The relay switches ON by pressing a button on the remote control and will remain ON
instructions to complete the installation of the APP
until button is released.

u Latched: Press 1-circuit-channel for 1 time,other channels are OFF

Ψ Users can also download and install the APP by scanning the QR code below.
u Toggle: Press transmitter button for 1 time,the receiver relay is ON,press button again,the receiver
relay if OFF.

u 1/2 channels toggle and 3/4 channels momentary: Press 1/2 channels for 1 time to switch the status,press
3/4 channels will remain ON until the button is released

u The mode is selected by the hop cap of the controller,as follows:

M short - circuit S short - circuit Mode Android IOS

suspended suspended momentary
short - circuited suspended latched
suspended short - circuit toggle
4.3.2 APP user registration and login
shorted shorted
1/2 channels toggle and 3/4
channels momentary
1) Click the registration button on the login page and enter the registration page

3/8 4/8

Downloaded from [Link] manuals search engine

 ό Please click on the national/regional page to select your country or [Link] back to registration Ψ Account Login
page, enter your right phone number, and click send verification code;Enter the verification code received
ό You must be choose your account to complete the login before you can manage and control your device.
by your ph one;Before clicking on the next step, you need to read the product disclaimer and check so that
agree to [Link] verification of the verification code, click next to enter the user information Enter the correct account and password, click login, successfully login and enter the system home page.
configuration page

4.3.3 APP User Manual

Ψ Used the APP and enter the personal center page;Click the user manual and enter the user's manual
page, where you can select what you want to know.
ό In the user information configuration page, write in your email address, login password, and fill in
the login password again;After confirming all the information, please click the finishing button, and
ό account management：Will introduce you to "new account registration, account login, password
the system will prompt you to register [Link] ok, and the system returns to the login page.
management, mailbox configuration" etc；
At this time, you can log into the software system using your account and password.

ό Device management：You will be introduced to "adding new device, device classification, device
list information" etc.

5/8

Downloaded from [Link] manuals search engine

 location management： introduced to "add new location, edit location, change of device location, or 4.3.5 The main control page of the product
delete"
Ψ When you successfully add the new device, pls click on the new device added, in which will enter the
ό Device control：introduce you to the application of "Device details control"
following main control page of the [Link] this time, you can enjoy the fun and convenience intelligent.

ό Note: Will introduce you to the use of APP .

4.3.4 One key to net in

5 FAQ
Ψ When the APP was installed,will introduce you to add a controller

Q1: Add device failed, and the LED indicator was slow flashing all the time
ό Click adding device -> confirm after entering the password (before entering the password,please press
three times of WIFI module button or controller UP button until seeing quick flashing)-> completed The LED indicator slow flashing means that it is connecting the router, the connection time over 60S,
it is fail, for that case, maybe wrong with "password entered error" or "data error in transmission". The
user need check the status of the cell phone or router network,and ensure router wife without any limit
contact,please try again for new reconfiguration.
Q2: The device is suddenly out of control
Check the router WIFI, whether the password is changed or not, and check the status of the red
indicator on the device, if it's slow flashing, this is disconnected from the router and controller， you need
reconfigure it.
Router assigns to the IP address of device because of the network, the IP address is changed, it
causes the actual IP of device to be inconsistent with the APP saved equipment, at this moment exit the
APP and restart, and retrieve the device information.

ό For more detailed instructions can be seen in the APP user manual

7/8 8/8

Downloaded from [Link] manuals search engine