Scribd
Upload
173 views4 pages

Control Unit Overview and Functions

The document describes the standard control unit (RCU-014) for a ship navigation system. It includes diagrams of the control unit labeling the power switch, buttons, trackball, and connector ports. It also provides exploded views of the internal components, including the CPU board and buzzer board. Additional optional units are described, including the card interface unit (CU-200) which provides two mini card slots for chart cards and includes a LAN port and power supply.

Uploaded by

PhuocTranThien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views4 pages

Control Unit Overview and Functions

The document describes the standard control unit (RCU-014) for a ship navigation system. It includes diagrams of the control unit labeling the power switch, buttons, trackball, and connector ports. It also provides exploded views of the internal components, including the CPU board and buzzer board. Additional optional units are described, including the card interface unit (CU-200) which provides two mini card slots for chart cards and includes a LAN port and power supply.

Uploaded by

PhuocTranThien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

2.

4 Control Unit

2.4 Control Unit


XH10P-W-5P
L=1.5/10/20/30 m

Left Button
Wheel

Right Button

Power Switch

Trackball

Fig. 2.4.1 Standard Control Unit (RCU-014J) Japanese version

Fig. 2.4.2 Standard Control Unit (RCU-014E) English version

2-37
2.4 Control Unit

J505 (For PROGRAM update port, J502 (REMOTE) for RCU-016


Factory use)
Cable Clamp
J501 (PROCESSOR) for PRU-013

J506 (EMRI) for EMRI Trackpilot

J507 (SYSTEM FAIL)


CR10 (Option of CPU,
U8, Blinks every second)

U8(CPU) Buzzer Board (03P9362)

PNL Board (03P9343)

Trackball J504 (TB) S36 (DIP SW)

S36 Function
SYSTEM FAIL ALARM
JP1 #1
(ON: Output from J507)
Open (Write Program) RELAY STATUS
Short (Ordinary) #2
(ON: Reversed polarity of the above signal)
#3 Not used
#4 Not used

Fig. 2.4.3 Standard Control Unit (RCU-014) with Cover Removed

2-38
2.4 Control Unit

Power Switch
RCU-015: Provided
RCU-016: Not provided
XH10P-W-5P-A
L=1.5/10/20/30 m

Fig. 2.4.4 Trackball /Remote Control Unit, RCU-015/016

J521 (PROCESS0R)
- RCU-013 Connector CR11(U5 CPU RUN)
- RCU-016 connects with RCU-015 Blinks every second.
(Remote Panel.)
トラックボール部

JP1
Open (Write Program)
Short (Default)
J527 (SYSTEM FAIL)

J524 (TB)
J522 (REMOTE)
- RCU-015 connects with RCU-016
(PROCESSOR.) ■ PNL 基板 (03P9344)

J525 (PROGRAM, Factory use)


S6 (DIP SW)
S6 Function
SYSTEM FAIL ALARM ON/OFF
#1
(ON: Output from J507)
RELAY STATUS
#2
(ON: Reversed polarity of the above signal)

Fig. 2.4.5 Trackball/Remote Control Unit (RCU-015/016) with Cover Removed

2-39
2.5 Optional Unit

2.5 Optional Unit

LAN Port
(100BASE-T)
Mini Card Slot (x2) for
C-MAP, NAVIONICS,
and FURUNO chart card. Power Supply
(12 VDC)
Port A Port B

Fig. 2.5.1 Card Interface Unit, CU-200

S1 (DIP SW)
#1: INIT #3: IP1
#2: IP2 #4: IP0
CR2 (U12 CPU RUN,
When two CU-200s are installed, on Blinks every second.)
S1-#4 2nd units is set to ON.

NET-100 Board
(03P9332)

CARD CPU Board


(03P9333)

Fig. 2.5.2 CU-200 with Cover Removed

2-40

You might also like