TECHNICAL DATASHEET MODEL: KFCRQ-2

CO2 (HIGH PRESSURE) 2 KG FIRE EXTINGUISHER

KANEX CO2 (High Pressure) 2 kg Fire Extinguishers applicable on Class B, C and electrically started fires. Which involves
flammable liquids and gases.

Brief description: Carbon Dioxide Fire Extinguishers with nominal charge of 2 kg (+/-5%). Constructed by hot spinning of
seamless pipe and brass forged discharge Valve. Approved Fire ratings 8B with an effective throw of about 2 meters (Min.
2 m.) and discharge about 98% (Min. 95%).

Client : PO No.

1.00 GENERAL DATA

1.01 Manufacturer Kanadia Fyr Fyter Pvt Ltd
1.02 Trade Mark “KANEX”
1.03 Standard Code IS 15683:2006
1.04 Type Portable High Pressure type
1.05 Quantity
2.00 MATERIALS OF CONSTRUCTION
2.01 Extinguishing Medium CO2 Gas (Purity as per IS: 15222-99.5%)
2.02 Body Seamless Manganese steel – ISI Marked confirms to IS:7285
2.03 Valve Brass – Wheel Type – IS: 3224
2.04 Siphon Tube Aluminum
2.05 Discharge Horn Polyethylene – Non-Conductor of Electricity
2.06 Wall mounting Bracket with screw Mild steel (Powder Coated)/M.S

3.00 GUARANTEED PERFORMANCE

3.01 Performance Requirement Min. effective Discharge Time: 8 Sec. (Actual : 9 Sec. approx)
Bulk Range of Discharge: Min. 2 meter (Actual : 2 meter approx)
Percentage of Discharge: Not Less than 95 % (Actual : 98% approx)
3.02 Temperature Range -30 °C to +55 °C
3.03 Service Pressure 60-70 bar
3.04 Fill Density Not to exceed 0.667 percent

4.00 ROUTINE TESTS

4.01 Pressure test (Pt) 250 bar (3.5 MPa)
4.02 Minimum Burst Pressure test (Pb) for Body 55 bar (5.5 MPa)
4.03 Leakage test By dipping in water, leakage to be checked
4.04 Partial discharge The second pressure or weight shall not be less than 75% of the first after interruption
of the Discharge.
4.05 Burst Pressure Test For Discharge Hose Not Less than 35 bar (3.5 Mpa)
5.00 TYPE TESTS As per IS 15683

6.00 DIMENSIONS Max. Diameter: 108±10 mm.

Height: 580 mm (Approx.)
Shell Thickness: 3.5 or 4.0 mm (Minimum)
8.2 or 8.9 kg (Approx)
6.01 Full weight of cylinder
7.00 COLOUR & PAINTS Painted with Durable Enamel PO Red shade No.538 of IS: 5

8.00 ACCESSORIES (BRACKETS & SCREWS) Provided

9.00 MISCELLANEOUS
9.01 Inspection & Testing As per approved GTP
9.03 Marking As per IS 15683:2006
9.04 Approvals BIS
9.05 Maintenance, Care and Refilling As per IS:2190

10.00 Packing Corrugated paper & Suitable Jute Bags

KANADIA FYR FYTER PVT LTD

tech2@[Link]
[Link]