Machine Condition MARGINAL
Lubricant Condition NORMAL
Machine Name: Engine - Main Propulsion
Machine ID: 4005AAC28003
Analysis Report
Component Information Sample Information Customer Information
Machine Type: Low Speed Diesel Sump Size: 5,320 Received: 12/15/2015 R-5 - Ship A-201
Lubricant: MOBIL/Mobilgard 300 Report: 12/15/2015 Port Example
Machine MFG: SULZER Sample No.: 2695 - 2 - 1 - 17 Baltimore, MD
Machine MOD: 6RND90 Data Analyst: DR Contact: Jack Boilerman
PROBLEMS COMMENTS Elevated wear metals may indicate accelerated machine wear. Inspect
HIGH COPPER. unit for abnormal noise, vibration and high temperature.
Low VISCOSITY 100C The viscosity is out of range due to excessive fuel contamination in the fluid. Fuel dilution
level is above acceptable limits. Locate source of fuel leakage or possible cause of
EXCESSIVE FUEL DILUTION
contamination prior to changing oil.
CUSTOMER NOTES Mach Hours: 86617 * Last oil change on 3/1/2014
Date Sampled NEW OIL 12/15/2015 9/22/2015 6/25/2015 3/25/2015 1/15/2014 Iron
Lab No 1616750 1551194 1494456 1441548 1405210 100
Machine / Lube Cond. M/N N/N N/N N/N N/N 80
Lube Hours 2755 2755 2999 4 2753 60
40
Machine Hours 86617 86617 86615 86373 86369
20
ELEMENTAL SPECTROSCOPY (ppm) ASTM D5185 Mod (-) indicates below detection limit
0
Iron 1/15/2014 3/25/2015 6/25/2015 9/22/2015 12/30/2015
12 12 14 15 11
Copper 103 51 44 33 16 Copper
Lead - - - 5 - 120
100
Aluminum 2 - - - -
Wear Metals
80
Tin - - - - - 60
40
Nickel - - - - -
20
Chromium - - - - - 0
1/15/2014 3/25/2015 6/25/2015 9/22/2015 12/30/2015
Titanium - - - - -
Vanadium 7 8 7 8 6 Viscosity @ 100C
12.5
Silver - - - - -
12.0
Calcium 1733 1790 1697 1996 1631 11.5
11.0
Magnesium 10 11 12 13 12 10.5
Additives
10.0
Phosphorus 173 167 170 217 157
9.5
Zinc 226 234 232 287 203 9.0
1/15/2014 3/25/2015 6/25/2015 9/22/2015 12/30/2015
Barium - - - - -
Base Number
Molybdenum - - - - -
5.2
Silicon 4 5 4 6 5 4.8
Contaminants
4.4
Boron 8 41 10 11 8
4.0
Lithium - - - - - 3.6
3.2
Sodium 50 38 43 60 41
2.8
Potassium - - - - - 1/15/2014 3/25/2015 6/25/2015 9/22/2015 12/30/2015
FTIR SPECTROSCOPY (Indexing Numbers) ASTM E2412
Oxidation 3 2 2 2 2
Glycol 0 0 0 0 0
Soot 3 3 4 3 3
Nitration 5 5 5 5 5
VISCOSITY (centistokes) ASTM D445
Viscosity@100°C 11.1 12.0 12.0 12.0 12.1 Date Customer Corrective Actions
BASE NUMBER (mg KOH/g) † - ASTM D4739 ‡ - IWI-390 1/13/13 re-sample; Possibility of switched sample warrants resampling.
Base Number 4.64 ‡ 5.16 ‡ 3.38 ‡ 2.99 ‡ 3.64 ‡
WATER (%) a-ASTM D6304A b-IWI-133 c-ASTM D6304C d-IWI-134* e-IWI-135* f-IWI-136* g-Crackle h-IWI-370*
Water NEG (g) NEG (g) NEG (g) NEG (g) NEG (g)
FUEL DILUTION BY GC (%)
Fuel Dilution 1.4 0 0.0 0.0 0.0
Testing performed by Insight Services ®, an ISO/IEC 17025:2005 accredited laboratory L-A-B Accredited Certificate Number 2221 Testing. (*) - Not in scope of accreditation. xxxxx assumes
sole responsibility for the application of and reliance upon results and recommendations reported by TestOil, whose obligation is limited to good faith performance.
Page 1 of 2 TestOil - 20338 Progress Drive - Strongsville, OH 44149 216-251-2510 [Link] Lab No. 1616750
Machine Condition MARGINAL
Lubricant Condition NORMAL
Machine Name: Engine - Main Propulsion
Machine ID: 4005AAC28003
Wear Particle Analysis Report
Trace Light Moderate Heavy Max. Size Particle Composition
Rubbing Wear 1 1 1 1 5-15 Copper Alloy,White Non-Ferrous
Rolling Contact 0 0 0 0
Sliding Wear 0 0 0 0
Rolling/Sliding Wear 0 0 0 0
Cutting Wear 0 0 0 0
Chunks 0 0 0 0
Spheres 0 0 0 0
Corrosion 0 0 0 0
Dark Metallic Oxides 0 0 0 0
Red Oxides 0 0 0 0
Dust/Dirt 4 4 4 4
Other Contaminants 0 0 0 0
Oxidation By-Products 0 0 0 0
Observations: Analytical microscopy has discovered the following abnormalities. High levels of dust and dirt. Excessive dust and dirt particles are the
result of external contamination. These are usually airborne and the result of open hatches, failed seals, poor filtration and inadequate breathers.
Microns Microns
100x Rubbing wear debris & dust/dirt. 200x Rubbing wear debris & dust/dirt.
Testing performed by Insight Services ®, an ISO/IEC 17025:2005 accredited laboratory L-A-B Accredited Certificate Number 2221 Testing. (*) - Not in scope of accreditation. xxxxxx assumes
sole responsibility for the application of and reliance upon results and recommendations reported by TestOil, whose obligation is limited to good faith performance.
Page 2 of 2 TestOil - 20338 Progress Drive - Strongsville, OH 44149 216-251-2510 [Link] Lab No. 1616750
