Cookery 9

QUARTER 4 LAS Number 6

(Week 8)
Name of Learner: Grade/Section:
Teacher: _________________________ Date Submitted:

LEARNING ACTIVITY SHEETS

Most Essential Learning Competencies:
1. Store Desserts
Background Information for Learners

STORE DESSERTS
Storing cold and hot desserts.
As many desserts contain egg and dairy products, they present a potential health hazard if
not stored properly.
Remember: Proper storage means cooled desserts must be covered with plastic or placed
in lidded containers before storing in the cool room.
Observe the following guidelines:
 Desserts containing uncooked eggs should be handled with extreme care, as raw
egg is a medium in which dangerous bacteria such as salmonella can thrive. This
means you need to be really careful with foods like chocolate mousse and uncooked
cheesecakes that contain egg whites for aeration.
 Egg custards contain protein, which provides good food for bacteria. If custards are
not heated and cooled properly and quickly, bacteria that are present in the custard
can grow quickly to dangerous numbers.  Any dessert that is not required for
immediate consumption must be cooled rapidly and stored in the cool room until
required.
 If you plan to keep a pre-prepared dessert hot until service, make sure that the
temperature of the food is over 65oC. Never leave an egg mixture in a Bain-Marie for
any length of time. Any dessert that has been kept hot in the Bain-Marie for a while
should be discarded at the end of service. 
 If milk and cream are used in desserts like trifle and custards, they must not be left
to stand at room temperature for any length of time. They should be kept in the
refrigerator until the last possible moment to prevent the risk of food poisoning.
 Many desserts have a limited storage life. Make sure you check with your supervisor
and follow organizational requirements.
Packaging Materials for Storing Desserts
1. glass container
2. plastic container
3. plastic/cellophane
4. aluminum foil
5. packaging tapes
6. boxes

Note: Practice Personal Hygiene protocols at all times. – [Link] 1

Equipment
1. chiller
2. freezer
3. refrigerator

Sanitary Practices When Storing Desserts

1. Handle the food properly to prevent spoilage and contamination.
2. Wash utensils and equipment thoroughly.
3. Keep away from food when you are ill.
4. Store foods and ingredients properly.
5. Safeguard the food during distribution and service.

Storage Techniques
1. Refrigerate – to keep cold or cool below 40°F
2. Cold Storage – the process of storing food by means of refrigeration at 23°C
2. Chilling – to refrigerate or to reduce the temperature of food below 8°C

Package Prepared Foods

Select Packaging Materials
Food packaging - is enclosing the food in a material for physical, chemical, biological
protection and tampering resistance. It provides nutrition information on the food being
consumed.
The main aims of packaging are to keep the food in good condition until it is sold and
consumed, and to encourage customers to purchase the product. Correct packaging is
essential to achieve both these objectives.
 Packaging should provide the correct environmental conditions for food starting from
the time food is packed until the time of consumption. A good package should
therefore perform the following functions:
 Provide a barrier against dirt and other contaminants thus keeping the product clean.
 Prevent losses. For example, packages should be securely closed to prevent
leakage
 Protect food against physical and chemical damage. For example the harmful effects
of air, light, insects, and rodents. Each product has its own needs
 Package design should provide protection and convenience in handling and transport
during distribution and marketing
 Help the customers to identify the food and instruct them how to use it correctly
 Persuade the consumer to purchase the food
 Cluster or group together small items in one package for efficiency. Powders and
granular materials need containment.
 Marketing - The packaging and labels can be used by marketers to encourage
potential buyers to purchase the product.
 Correct packaging prevents any wastage (such as leakage or deterioration) which
may occur during transportation and distribution.

Note: Practice Personal Hygiene protocols at all times. – [Link] 2

Types of Packaging materials
In many developing countries the most commonly used food packaging materials include:
 Leaves
 Vegetable fibers
 Wood
 Papers
 Newsprint
 Earthenware
 Glass
 Plastics
 Metals

Leaves Banana
Leaves are often used for wrapping certain types of food (e.g. suman). Corn husk is used to
wrap corn paste or unrefined block sugar, and cooked foods of all types are wrapped in leaves.
They do not however protect the food against moisture, oxygen, odors or micro-organisms,
and therefore, not suitable for long-term storage.
Vegetable Fibers
These include bamboo, banana, coconut, and cotton fibers. These natural materials are
converted into yarn, string or cord which will form the packaging material. These materials are
very flexible, have some resistance to tearing, and are lightweight for handling and
transportation. Being of vegetable origin, all of these materials are biodegradable and to some
extent re-usable.
As with leaves, vegetable fibres do not provide protection to food which has a long
shelf-life since they offer no protection against moisture pick-up, micro-organisms, or insects
and rodents.
Vegetable fiber basket
Wood - Wooden shipping containers have traditionally been used for a wide
range of solid and liquid foods including fruits, vegetables, tea and beer. Wood offers
good protection, good stacking characteristics and strength. Plastic containers,
however, have a lower cost and have largely replaced wood in many applications. The
use of wood continues for some wines and spirits because the transfer of flavor
compounds from the wooden barrels improves the quality of the product.
Wooden crate
Paper - Paper is an inexpensive packaging material. It is however highly
absorptive, fairly easily torn, and offers no barrier to water or gases. The degree of
paper re-use will depend on its former use, and therefore paper that is dirty or stained
should be rejected. Newsprint should be used only as an outer wrapper and not be
allowed to come into direct contact with food, as the ink used is toxic.
Earthenware - Earthenware pots are used worldwide for storing liquids and
solid foods such as curd, yoghurt, beer, dried food, and honey. Corks, wooden lids,
leaves, wax, plastic sheets, or combinations of these are used to seal the pots.
Glass - Glass has many properties which make it a popular choice as a
packaging material:
 Glass is able to withstand heat treatments such as pasteurization and
sterilization.
 Does not react with food.
 Protects the food from crushing and bruising

Note: Practice Personal Hygiene protocols at all times. – [Link] 3

  Resistant to moisture, gases, odors and microorganisms
 Re-usable, re-sealable and recyclable
 Transparent, allowing products to be displayed.
 Colored glass may be used either to protect the food from light or to attract
customers.

Disadvantages of using glass as packaging materials

 glass is heavier than many other packaging materials and this may lead to higher
transport costs
 it is easy to fracture, scratch and break if heated or cooled too quickly
 Potentially serious hazards may arise from glass cracks or fragments in the food.

Preparation of glass containers

 Inspection
 Washing.
 Rinsing.
 Sterilization.
 Sealing and capping
 Cooling

Plastics
The use of various plastics for containing and wrapping food depends on what is available.
Plastics are extremely useful as they can be made in either soft or hard forms, as sheets or
containers, and with different thickness, light resistance, and flexibility. The filling and sealing
of plastic containers is similar to glass containers.

Flexible films are the most common form of plastic.

Generally, flexible films have the following properties:
 Cost is relatively low.
 Good barrier properties against moisture and gases.
 Heat sealable to prevent leakage of contents.
 Have wet and dry strength.
 Easy to handle and convenient for the manufacturer, retailer, and
consumer.
 Little weight to the product.
 Fit closely to the shape of the product, thereby wasting little space during
storage and distribution.
Metal
Metal cans have a number of advantages over other types of containers:
 Metal cans provide total protection of the contents.
 Metal cans are tamper proof.
 Metal cans are convenient for presentation.
Disadvantages of metal food packaging materials:
 heavier than other materials, except glass, and therefore have higher
transport costs
 the heat treatment associated with the use of metal cans is not suitable
for small-scale production

Note: Practice Personal Hygiene protocols at all times. – [Link] 4

 PACKAGE FOOD ITEMS

Food Safety on Storing and Transporting Foods

Food Packaging has been defined by Paine (1962) as the “art science and technology
of preparing goods for transport and sale”. More specifically, it is a way of making sure that a
product reaches the end user in good condition at the least cost to the producer. In effect, a
packaging material provides the means of transporting a product from one place to another
with maximum protection at the least cost
Food is packed in terms of quality, shelf life, microbial condition and portion control.
Spoilage of food is caused by poor packaging of food. Below are some other factors in the
spoilage of food:
a. Ph of food- This simply indicates the inverse amount of hydrogen ion available in the
food system. This is oftentimes associated with acidity of food. Thus, foods with high
amounts of hydrogen ion have low pH and this is considered to have acidic taste. For
instance, green mangoes have generally lower pH (Ph below 4.0) and therefore have
high acidity.
b. Moisture content – This is related to the physical state of the food itself. Products with
very high moisture could be those in liquid form, while those with very low free moisture
could be dried or frozen. This product component is very important relative to food
spoilage. The higher the moisture content, the greater the chances for microbial growth
and chemical changes.
c. Amount and nature of fat content – The chemical processes also accelerate
breakdown of fats on food. Thus, products with high fat content like oils, butter, soft
cheese, fried foods and the like tend to spoil fast when inadequately packaged.
Exposure to the atmosphere causes rapid oxidation breaking down the fat into free
fatty acids in food. The faster the breakdown, the greater the chances of development
of rancidity.
d. Enzyme system –It is a chemical processes like fermentation and hydrolysis which
occur in high moisture food, especially in the presence of oxygen of ambient tropical
temperature. When foods undergo these processes, they change in texture, flavor,
odor and color. Under these conditions, the product may already be considered
spoiled.
e. Initial Microbial load – This is the number of microorganism already present in food prior
packaging.
Classification of packaging according to use:
 As a primary package – This type of package is meant to directly contain the product.
Hence, it gets in direct contact with the goods. Thus, this package is expected to meet
all the requirements for safety and protection of the consumers like tetra packs or
canned food packages.
 As a secondary package – This is utilized to contain a specified number of unit packs.
Thus, it may contain a dozen tetra packs or 2 dozens of tin cans or a gross of candies
and so on. Its major function is to allow for the unit packs to be carried in bulk.
 As a tertiary package – When transporting in bulk, the secondary package may have
to be packed again for greater protection and for bulk transfer. Use of tertiary package
is normally for bulk transport or storage in large warehouses.

Note: Practice Personal Hygiene protocols at all times. – [Link] 5

Occupational and health safety procedures in packaging foods
Steps on how to package meat before freezing.
1. Divide your meat into your set serving sizes
2. Get a plastic zip bag big enough to hold the portion size plus a little extra room for
the meat to expand from the freezing process.
3. Put the meat into the bag, then flatten.
4. Squeeze as much of the air as you can get out, then close the zip.
5. Date the bag so you know how long it's been in your freezer.

Methods of Food Packaging

a. Home Canned Foods - one of the oldest and most common methods of food
packaging in homes is the use of home canning. Fruits and vegetables are placed in
glass jars and sealed in the jars by heating the jars and then placing a rubber stopped
jar top on the jar. The seals also need to be airtight to prevent the growth of bacteria.
b. Freezing and chilling food - another common method of packaging food is freezing
and chilling .Freezing can be done with a variety of methods. Most often, it is
vegetables that are frozen, although berries and other fruits can also lend themselves
to being frozen.
Canned foods - canning foods as a method of food processing have been around, foods that
are canned commercially are cooked prior to being placed in the can in order to prevent E.
coli contamination. Canned foods come in a wide variety, ranging from meat to vegetables to
fruit.
Foil Packaging - one of the innovative methods of commercial food packaging is foil
wrapping. Foil wraps are often pouches that are filled and then the bottom and top of the pouch
is sealed with a heat seal similar to those used with commercial frozen packaging. Foil
packaging allows the foods to be sealed in the package without losing any residual moisture
that may still be in the food. The best foods to package in this manner are usually dried fruits,
baked goods or grain products.
What must appear on the label?
The following must appear on the label:
 Name under which the product is sold
 List of ingredients
 Quantity of certain ingredients
 Net quantity
 Date of minimum durability
 Any special storage instructions or conditions of use
 Name or business name and address of the manufacturer or packager,
or of a seller within the European Union
 Place of origin of the foodstuff if its absence might mislead the
consumer to a material degree
 Instructions for use where necessary
 Beverages with more than 1.2% alcohol by volume must declare their
actual alcoholic strength

Note: Practice Personal Hygiene protocols at all times. – [Link] 6

Learning Activity Sheet Number 1: Multiple Choice
Directions:
Read the following statements carefully and choose the answer that best describes the
statement
1. The purpose of storing dessert is to
a. increase its volume c. improve the palatability
b. soften food tissues d. enhance freshness and quality
2. In plating and presenting food, which among the following statement is related to
texture?
a. Enhances plate presentation
b. adds visual interest to the food
c. Plays important part in plate presentation
d. Serve as frame of the presentation
3. Which of the following sanitary practices is not true in storing desserts?
a. Wash utensils and equipment thoroughly
b. Keep away from food when you are ill
c. Store foods and ingredients in a dry place
d. Safeguard the food during distribution
4. Which of the following guidelines should not be practiced in plating dessert?
a. Layer flavors and texture c. Don’t crowd the plate
b. Make garnishes edible d. Use monotype of plate
5. Which of the following cannot be used as garnishing in dessert?
a. fruit b. chocolate c. nut d. flower
6. This packaging material is man-made polymers of very high molecular weight.
a. cellophane b. plastic c. glass d. metal
7. A thin and transparent material that is made of cellulose and contains variable
amount of water and softener.
a. Cellophane b. metal c. glass d. paper
8. . Which of the following material is made from wood pulp and used for flexible
packaging of goods?
a. Cellophane b. metal c. glass d. paper
9. This term refer to packaging in large standardized containers for efficient shipping
and handling.
a. aseptically b. packaging c. bulk d. containerization
10. What is the process of putting your product into containers for easy distribution?
a. wrapping b. packaging c. labeling d. storing
11. The purpose of storing dessert is to
a. increase its volume c. improve the palatability
b. soften food tissues d. enhance freshness and quality
12. A sweet course or dish which is usually served at the end of a meal.
a. Sauce b. Stock c. Dessert d. Appetizer
13. All of the following are characteristics of good fruit desserts, EXCEPT
a. Appetizing aroma c. slightly chilled temperature
b. simple and attractive d. moderately sweet
14. The packaging allows the foods to be sealed in the package without losing any
residual moisture that may still be in the food.
a. Foil packaging b. canned foods c. Freezing and chilling d. home canned
15. This type of package is meant to directly contain the product.
a. Primary Package
b. Secondary Package
c. Tertiary Package
d. Chilling

Note: Practice Personal Hygiene protocols at all times. – [Link] 7