DATA SHEET
OptiBox 32 fiber optic distribution and termination enclosure (OTB32)
Product description
The optical distribution enclosure (OptiBox32) impresses due to its simple design, its wide application range and its
customer-friendly handling during installation and maintenance.
The OTB32 is typically used as a fiber optic distribution and termination enclosure, which is ideally suited for
splicing, patching and accommodating passive optical components. The installation-friendly plastic enclosure is
typically used by telecom customers (FTTH / FITH) and is designed for indoor and outdoor wall mounting (IP54 /
IP65).
A number of mounting points offer users the option of fastening multi-fiber loose tube cables, riser cables, micro
cables, patch cords, pre-assembled cable systems or micro conduits, including optional gas/water blockers.
The clearly-defined and easily accessible fiber storage and fiber routing guides are bending radius protected and
provide the necessary protection against mechanical influences.
The OTB32 can be equipped with various ACS-series cassettes on a modular basis. It enables both single and
multi-circuit fiber management, as well as simple installation of passive components such as splitters or WDMs.
Characteristics
• Splice and patch enclosure comprising a base, fiber inlay and cover
• Patch panel for up to 32 SC-shape adapters (LC Duplex, LX.5 Duplex, SC, E-2000 )
TM
• Can be equipped with up to 16 ACS splice cassettes (multi-circuit or single-circuit management)
• Can be equipped with up to 8 ACS splitter cassettes (several splitters can be installed in each
cassette)
• Cable inputs: two below and one above
• Cable outputs: one above and eight below
• Hinged half-shell grommets ensure simple cable entry and exit
• Bending radius protected fiber overlength storage (r ≥28 mm)
• Pigtail to pigtail configuration
• Optionally with lock
• UV-resistant enclosure
• Enclosure meets the requirements for moderate outdoor applications (IP54/IP65).
Prepared by Project Management FMS [Link] 1/5
DOC-0000361846
Rev: B
uncontrolled copy
DATA SHEET
OptiBox 32 fiber optic distribution and termination enclosure (OTB32)
Product overview
Screws for fastening the enclosure
cover
Cover, including injected seal
Standard patch field for up to 32
SC-shape adapters
Inlay
Cable retaining tab
Hinged half-shell grommet
Base
Scope of delivery (standard)
As standard, the OTB32 comprises a base, an inlay, including a standard patch field, and a cover. In addition, 10
hinged half-shell grommets and 8 cable fixing latches are supplied.
In the standard version, additional components such as splice cassettes, adapters, pigtails etc. are supplied
separately.
The enclosure, including all additional components, is supplied together with installation instructions.
Prepared by Project Management FMS [Link] 2/5
DOC-0000361846
Rev: B
uncontrolled copy
DATA SHEET
OptiBox 32 fiber optic distribution and termination enclosure (OTB32)
Technical data
Features Value
Dimensions (W x L x H) 407 x 518 x 107 mm
Non-detachable connection capacity (splices) Up to 384
Detachable connection capacity (connectors) 32 x SC and E-2000TM , 64 x LC and LX.5,
Capacity for ACS cassette system
ACS – MCM splice cassettes (≤ 24 splices) 16
ACS – SCM splice cassettes (≤4 splices) 16
ACS – SPL splitter cassettes 8
Dimensions of cables or blow-in conduit systems with use of
Ø 3 – 18 mm
grommets
Material: enclosure (cover and base) PC
Inlay PC / ABS
Colour: enclosure (cover / base) RAL 7047, telegrey 4
Inlay RAL 7047, telegrey 4
Grommet RAL 9005, jet black
Type of protection (EN60529) IP54 / IP65
Impact strength (EN62262) IK08
Temperature resistance (short-term) -40° to +85°C
Flammability rating, enclosure UL 94V-0
UV resistance: resistant
RoHS requirements fully met
Halogen-free yes (except hinged half-shell grommets)
Prepared by Project Management FMS [Link] 3/5
DOC-0000361846
Rev: B
uncontrolled copy
DATA SHEET
OptiBox 32 fiber optic distribution and termination enclosure (OTB32)
Technical drawing
Enclosure
Hinged half-shell grommet Cable fixing latch
Prepared by Project Management FMS [Link] 4/5
DOC-0000361846
Rev: B
uncontrolled copy
DATA SHEET
OptiBox 32 fiber optic distribution and termination enclosure (OTB32)
Accessories and spare parts
Article Documents /
number links
Strain-relief clip for central elements 84010409 LiSA catalogue (84101813)
ACS cassette SCM (single-circuit cassette) 84123331 FITH catalogue (84128278)
ACS cassette MCM (multi-circuit cassette) 84123330 FITH catalogue (84128278)
ACS cassette SPC (splitter cassette) 84123332 FITH catalogue (84128278)
ACS cassette cover, small (SCM) 84123616 FITH catalogue (84128278)
ACS cassette cover, small (MCM, SCM, SPC) 84123617 FITH catalogue (84128278)
Splice protection sleeves (heat shrink and
various FITH catalogue (84128278)
sandwich)
Splice protectors (heat shrink and sandwich) various FITH catalogue (84128278)
Grommet 3-18 mm 84123347 FITH catalogue (84128278)
Cable fixing latch 84123348 FITH catalogue (84128278)
Adapters various LiSA catalogue (84101813)
Pigtails various LiSA catalogue (84101813)
Relevant documents
Optibox Ordercode DOC-0000390305
Optibox32 Installation instructions DOC-0000392662
IP Test - Protocol (X5 / 6X) DOC-0000386149 / DOC-0000390224
IK Test - Protocol DOC-0000387464
Cabling options DOC-0000390278
Further information
FITH microsite [Link]
H+S website [Link]
HUBER+SUHNER is certified according to ISO 9001 and ISO
14001
.
HUBER+SUHNER AG
Fiber Optics Division
Note 9100 Herisau/Switzerland
It is exclusively in written agreements that we provide our customers with warrants and
representations as to the technical specifications and/or the fitness for any particular Tel. +41 (71) 353 41 11
purpose. The facts and figures contained herein are carefully compiled to the best of our
knowledge, but they are intended for general information purposes only.
Fax +41 (71) 353 46 47
E-mail: intouch@[Link]
Prepared by Project Management FMS [Link] 5/5
DOC-0000361846
Rev: B
uncontrolled copy
