Auto Tronics
Name Quotation No.:
Date:
Valid to
E.D.D
ب ك إ ر ن ا ود و ت ا ر م ا ر2 و1 ب أن وم "راء ا د ن ر م$
ھذا ا &رض ) ا ود و ت ا ر$ ظ أن+ ) ا ر, - . &/ م ك ا& ل و$
ن/ واع ا2 ط ء ا & ل4 5 & ل &د. وھ ك ود و ت أ رى م م إرOBD II ل+ & ل ن
ا & ول
Item Description Price "USD" Quantity Subtotal "USD" Note
Basic version of the program supporting such ECUs: Yanvar-5.x, Yanvar -
7.2, VS-5.1, Bosch M7.9.7, M7.9.7+, Mikas-7.1, Mikas -7.6, Mikas -10.3,
Programer Basic Program With
1 120 Mikas -10.3+ ( Mikas -11), Mikas -11 (vehicles GAZ), VS-8, Yanvar-7.2+,
Dongle
Kefico M 7.9.7, Bosch MP-7.0, Bosch ME 7.9.9, Bosch M 7.9.8, Bosch ME
7.1, Bosch ME 7.5, Bosch ME 7.5.10, Bosch ME 7.9.7.
adapter will be useful for those users who wish to get more possibilities than
Lite device can provide. At this moment the adapter is one of the most
2 Programer adapter 120 affordable adapters in its class. Possibility to use various working modes of
the adapter (J2534, K-Line adapter, CANHacker) substantially widens
possibilities of its using.
"TTC1762/TC1766/TC1796/TC1797/TC1767/TC1724/TC1738-boot mode"
(ECU of the type Bosch ME17.9.x and others with the processor Tricore
3 Tri Core - Boot mode "read & write" 230 TC1762/TC1766/TC1796/TC1797/TC1767/TC1724/TC1738) Support
Tricore with TPROT 1-7, TPROT12, VAG TPROT 8-10, read password
ECU SIM2K-24x (Kia, Hyundai).
Module "Bosch M(E)7.9.7-OBDII" (Bosch Kefico M7.9.7, Bosch M7.9.7(+)
Bosch M(E)7.9.7 - OBDII "write
4 20 (vehicles VAZ), Bosch M7.9.7+ (vehicles Geely, Amulet), Bosch M7.9.7.1
only"
(vehicles Chevrolet Aveo), Bosch ME7.9.7 (vehicles Chery)).
The module "Bosch ME17.9.11/12/13 - OBD2" is foreseen for reading and
Module "Bosch ME17.9.11/12/13 - writing tuned and original fimwares via OBD2 socket. The module carries out
5 120
OBD2" "read & write" fake of the digital signature of the firmware, which has been downloaded, in
order to write it via OBD2 socket.
Auto Tronics
Module "SIM2K-140/141/241/245/341/D160- OBDII" supporting ECU
SIM2K-140/141/341/D160- OBDII
6 120 Siemens SIM2K140/141/241/245 (for vehicles Kia, Hyundai), Siemens
"write only"
SIM2K-D160 (for vehicles Chevrolet Epica)
Bosch M(G) 7.9.8 - OBDII "write Module "Bosch M(G) 7.9.8 - OBDII" - supporting ECU Bosch M 7.9.8, MG
7 130
only" 7.9.8 via OBDII socket. A J2534 device is used as a compatible device.
Siemens Siemens SIMK31/SIMK41/SIMK43/SIM2K-47/Siemens (5 sockets) - OBDII
SIMK31/SIMK41/SIMK43/SIM2K- - supporting ECU Siemens SIMK31, SIMK41, SIMK43, SIM2K-47
8 95
47/Siemens (5 connectors) - OBDII via OBDII socket, including via CAN bus. A K-Line adapter or a J2534
"read and write " device is used as an adapter.
The module "EDC17/MED(G)17 (Kia/Hyundai) - OBDII" is foreseen for
reading and writing of the FLASH memory of the ECUs EDC17C08, Bosch
EDC17/MED(G)17 (Kia/Hyundai) -
9 35 EDC17CP14, Bosch MED(G)17.9.8 via a J2534 device. Please note that this
OBDII "read & write"
module can write only specially prepared tuned firmwares or original
firmwares!
HV-240/MR-140-OBDII "read & Module "Delphi HV240/MR140-OBDII" (for vehicles Chevrolet Aveo,
10 75
write" Lacetti)
DELPHI MT20U / MT38 /
11 MT20U2 / MT22U - OBDII "read 70 Module "Delphi MT20U/MT38/MT20U2/MT22U-OBDII" (for vehicles
& write" Chery, BYD, Hoover, Lifan, Kia, Hyundai)
BOSCH ME7.9.9 - OBDII "read
12 70
& write" supporting ECU Bosch ME7.9.9 (for vehicles Chevrolet Captiva 2.4)
Module "Bosch M78/ME797+ - OBD2" is made to write ECUs Bosch M78,
ME797+ via OBD2 socket on vehicles of Ukrainian and Chinese production.
At this moment ECUs for such vehicles are supported: M78 ECUs for ZAZ
Forza, Geely CK2, Geely MK2, Geely Emgrand, Great Wall Wingle vehicles,
13 50 M788 ECUs for JAC, Geely GC6, Chery Tiggo, Lifan X50, Changan, Haima,
Great Wall, Chery M11, Brilliance V5 vehicles. Also the module allows
unlocking protection from the processor to read full flash in the boot mode.
BOSCH M78 / M788 / ME797+ -
OBDII
SIMTEC 76 / DELPHI MT60 /
14 70
MT80 - OBDII "read & write" Module "Simtec 76/Delphi MT60/MT80-OBDII" (for vehicles Chevrolet)
supports reading of maps, full flash of the ECU ACDelco E83, E39, E39A,
15 110 E78, E37, E38. You can write only maps. The module allows to recalculate
ACDELCO - OBDII "read & write" the checksum before writing the firmware.
Auto Tronics
supports work with the ECUs Simtec-71.5, Simtec-71.6, Simtec-75.1, Simtec
75.5, Simtec 81.1, Delphi MT35E, Bosch ME9.1 / ACDelco E77 (reading and
16 75
writing of the FLASH memory). The module supports work with these ECUs
OPEL ECU - OBDII "read & write" only via CAN bus.
This module is foreseen for reading/writing of the FLASH memory of the
ECU Keihin with the processor SH7058 / SH72543, set on vehicles Honda,
via a diagnostic OBDII socket. At this moment the module supports the ECUs
of the vehicles Honda Accord (the 8th generation), Honda Civic (the 8th, 9th
17 239 generation), Honda Jazz/Fit (the 2nd generation), Honda CRV (the 3rd
generation), Acura TSX (2rd generation), Acura CSX (1rd generation), Acura
HONDA / ACURA KEIHIN MDX (2rd generation), Acura RDX (1rd generation), Honda Pilot (2rd
SH7058 / SH72543 - OBDII "read & generation) . These are approximately vehicles of 2008 - 2011 years of
write" production.
VALEO V40/V42 - OBDII "read & The module "Valeo V40/V42 - OBDII" is foreseen to read/write the FLASH
18 55
write" memory of the ECUs Valeo V40/V42 for Renault vehicles.
The module "VW Polo ECU - OBDII" can read, write FLASH memory for
the ECU Magnetti Marelli 7GV, 7GVE set on vehicles VW via J2534 device.
19 90 Checksum correction is also supported.
VW POLO ECU - OBDII "read &
write"
The module "Denso ECU SH7058 - OBDII" is foreseen to read/write the
FLASH memory for the ECUs Denso with the processor SH7058, set on such
vehicles as Suzuki, Mitsubishi, Volvo and others of about 2007-2010 years of
20 115 production. Please pay your attention to the fact that only such Denso ECUs
are supported in which the producer introduced the engineer way of work with
the ECU. The module uses the intellectual algorythm for safe writing of the
DENSO ECU SH7058 - OBDII FLASH memory. The option to calculate the checksum and to check the
"read & write" correctness of the checksum calculation is also supported.
The module "GM SIM2K-243 - OBDII" can read, write FLASH memory for
the ECU SIM2K-243 set on vehicles GM via J2534 device. Checksum
21 95 correction for maps area is also supported.
GM SIM2K-243 - OBDII "read &
write"
Auto Tronics
The module "Mazda Denso unboxed ECU - OBDII" can read, write FLASH
memory for the unboxed ECU set on vehicles Mazda (2003-2013) via J2534
22 95 device. Checksum correction is also supported.
MAZDA DENSO UNBOXED ECU -
OBDII "read & write"
23 DHL Shipping Fees
Total
