Scribd
Upload
470 views9 pages

Eco Mode Engine Speed Management

The document discusses travel mode engine speed management, also called "Travel ECO mode", on WEX machines except the M313D. When in 2nd gear with 100% travel pedal engagement for 2 seconds, the "Rqst Spd Dial" is automatically reduced from 10 to 7 on M316D and up, and to 9 on M315D, to reduce engine speed. This lowers fuel consumption, noise, and improves efficiency by reducing parasitic loads and increasing main pump efficiency at higher pump angles. The conclusion is that while the M300D is faster than the M300C+, fuel consumption is reduced in ECO mode.

Uploaded by

Mehdi Chakroune
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
470 views9 pages

Eco Mode Engine Speed Management

The document discusses travel mode engine speed management, also called "Travel ECO mode", on WEX machines except the M313D. When in 2nd gear with 100% travel pedal engagement for 2 seconds, the "Rqst Spd Dial" is automatically reduced from 10 to 7 on M316D and up, and to 9 on M315D, to reduce engine speed. This lowers fuel consumption, noise, and improves efficiency by reducing parasitic loads and increasing main pump efficiency at higher pump angles. The conclusion is that while the M300D is faster than the M300C+, fuel consumption is reduced in ECO mode.

Uploaded by

Mehdi Chakroune
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Travel Mode Engine Speed Management

(all WEX but M313D)

The Eco Mode automatically reduces „Rqst Spd


Dial“

from dial 10 to 7 (M316D & up)


to 9 on M315D,
(feature not available on M313D)

when the operator is

- in 2 nd gear, and

- withtravel pedal at 100% for 2s at least.


Why Travel Mode Engine Speed Management ?
(also called „Travel ECO mode“)

- Reduced Power Loss


- parasite load from other pumps reduced since lower rpm

- main pump more efficient (because higher main pump angle)

- Reduced Fuel Consumption (obvious at lower rpm),

- Reduced Noise etc...

CONCLUSION: M300D faster than M300C+


but fuel consumption is reduced !
When the travel
engine speed
management feature
engages,
ECO shows on the monitor
instead of usual
Speed Dial indicator
Desired Engine Speed versus
Speed Dial
Top Speed:
2100

No
Travel
Desired Engine Speed versus
Speed Dial
Top Speed:
2100

Travel First
Gear
Unchang
ed
Desired Engine Speed versus
Speed Dial
Top Speed: NOT
2100

Travel 2nd
Lower Desired Engine Speed :
Gear
ECO For all but
M313D !

M316D … M322D :
Speed Dial 7
M315D: Speed Dial 9
M313D: no ECO
Engine Performance M318 C/D-FT

Engine Power
Curves

Pump Torque
Curves
Attention: M313D, no ECO-mode

Max Power at dial 10 only !!! No longer any power


peak at dial 7.
Therefore, no ECO mode on M313D.
Note: Also new on D-serie

Dial 10 = 100% max speed (e.g. 37


km/h)
Dial 9 = 96% max speed (e.g. 35
km/h)
Dial 8 = 92% max speed (e.g. 34
km/h)…

You might also like