Docs. No.
QA-F-02
BSL MAGNETIC PARTICLE TEST REPORT REV. 03
Castings Pvt. Ltd. Date 01.06.2018
COMPONENT DETAILS
Test Report No. BSL/MT/01/11/11/2019 Date 11.11.2019
Customer M/s Kessels Engineering Item Name Steam Casing (Top & Bottom)
KCTM/ND/QF/39/8022/2019-
P.O. No. Material ASTM A216 [Link]
20/82 Dt. 20.05.2019
Drag. No. KC-10001 R0, KC-10002 R1 Heat No. DC-1204
Test Site BSL Castings Pvt. Ltd. SL No. 02 & 02
QAP ---- Qty. 02
MPT EQUIPMENT, ACCESSORIES & PARAMETERS
Surface of Examination As Cast
Stage of Test 1st
Test Objectives Detection of Surface & sub surface Area Examined As per scan plan
Defects
Equipment / Model MT4000SPL Make K-Electronics
MK-LED-5000, Make- Magkraft, Sl. No.- 14/2014, Intensity- 4000µW/cm 2
UV LAMP.
Test Meter at a distance of 15” from Lens of Light
Testing Operator ASNT Level-II
Specification ASTM E709
Acceptance Criteria E125
Method Used Prod Method
Calibration Standard Field Indicator
Particle Fluorescent water base (Wet Method), Magnaflux
Type of Magnetization 6” S Q Diagram
Magnetizing Current HWDC 1000Amps.
Prod Spacing 150mm
De-magnetization Not Done
OBSERVATIONS: - No relevant indication observed hence material found satisfactory within the specification.
Test Results: Acceptable
Remarks:
Checked By Approved By Reviewed/ Witnessed By
(MT Level-II) Name Name
Name BSL Castings Pvt. Ltd. Organization
BSL Castings Pvt. Ltd.
Checked By Approved By Reviewed/ Witnessed By
(MT Level-II) Name Name
Name BSL Castings Pvt. Ltd. Organization
BSL Castings Pvt. Ltd.
Docs. No. QA-F-02
BSL MAGNETIC PARTICLE TEST REPORT REV. 03
Castings Pvt. Ltd. Date 01.06.2018
COMPONENT DETAILS
Test Report No. BSL/ MT/01/25/11/2019 Date 25.11.2019
Customer M/s Kessels Engineering Item Name Steam Casing (Top & Bottom)
KCTM/ND/QF/39/8022/2019-
P.O. No. Material ASTM A216 Gr. WCB
20/82 Dt. 20.05.2019
Drag. No. KC-10001 R0, KC-10002 R1 Heat No. DC-1204
Test Site BSL Castings Pvt. Ltd. SL No. 02 & 02
QAP ---- Qty. 02 Nos
MPT EQUIPMENT, ACCESSORIES & PARAMETERS
Surface of Examination As Cast
Stage of Test Final Stage
Test Objectives Detection of Surface & sub surface Area Examined As per scan plan
Defects
Equipment / Model MT4000SPL Make K-Electronics
MK-LED-5000, Make- Magkraft, Sl. No.- 14/2014, Intensity- 4000µW/cm 2
UV LAMP.
Test Meter at a distance of 15” from Lens of Light
Testing Operator ASNT Level-II
Specification ASTM E709
Acceptance Criteria E125
Method Used Prod Method
Calibration Standard Field Indicator
Particle Fluorescent water base (Wet Method), Magnaflux
Type of Magnetization 6” S Q Diagram
Magnetizing Current HWDC 1000Amps.
Prod Spacing 150mm
De-magnetization Not Done
OBSERVATIONS: - No relevant indication observed hence material satisfactory within the specification.
Test Results: Acceptable
Remarks:
Checked By Approved By Reviewed/ Witnessed By
(MT Level-II) Name Name
Name BSL Castings Pvt. Ltd. Organization
BSL Castings Pvt. Ltd.
