Scribd
Upload
180 views2 pages

Bend Allowance Calculation Guide

Calculating the correct flat pattern layout for a press brake is important for getting a quality finished part. This document explains how to calculate the bend allowance, which is the extra length needed in the flat pattern for the material to bend correctly. It provides an example of calculating the bend allowance for a simple L-bracket using the radius, thickness, angle, and K-factor. The total flat length is calculated by adding the lengths of each flange and one bend allowance. However, sheet metal parts are usually dimensioned to the mold line, so the bend compensation value which subtracts from the total is more appropriate.

Uploaded by

Lokesh Basappa
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
180 views2 pages

Bend Allowance Calculation Guide

Calculating the correct flat pattern layout for a press brake is important for getting a quality finished part. This document explains how to calculate the bend allowance, which is the extra length needed in the flat pattern for the material to bend correctly. It provides an example of calculating the bend allowance for a simple L-bracket using the radius, thickness, angle, and K-factor. The total flat length is calculated by adding the lengths of each flange and one bend allowance. However, sheet metal parts are usually dimensioned to the mold line, so the bend compensation value which subtracts from the total is more appropriate.

Uploaded by

Lokesh Basappa
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

How to Calculate Bend Allowance for Your Press Brake

 
Calculating the correct flat pattern layout is crucial to getting a good quality finished part from your press
brake. Yet, many CAD and CNC programmers have no idea how to calculate the required values. Years
ago, the real experts created cheat sheets and tacked them to the wall. They only taught the new
apprentice how to apply the results shown on the cheat sheet, not how to calculate the numbers. Well,
now those experts have retired and it's time for a new generation to learn the right way to do the calculate
the correct flat pattern layout.

Calculating the flat pattern length from the 3D part really isn’t that difficult. Although you may find several
different formulas that claim to calculate the Bend Allowance (See Bending Definitions), they usually are
the same formula, only simplified by filling in the angle or a K-factor. Oh, and yes, you do need to know
the K-factor to calculate the Bend Allowance.

Let’s start with a simple L bracket. The picture shows that the legs of the bracket are 2” and 3”. The
material thickness is 0.036”, the inside radius is 0.125”, and the angle of bend is 90 degrees. The flat
length is the total of the flat portion of both flanges plus the length through the arc of the bend area. But,
do you calculate that on the inside of the material or the outside? Neither! This is where the K-factor
comes into play. The K-factor is the percentage of the material thickness where there is no stretching or
compressing of the material, for example, the neutral axis. For this simple L bracket, I will use a K-factor
of 0.42.

The formula (See Bending Formulas) is: Bend Allowance = Angle * (PI / 180) * (Radius + K-factor *
Thickness). Plugging in our numbers, we have: Bend Allowance = 90 * (PI / 180) * (0.125 + 0.42 * 0.036)
= 0.2200999813105009. If you don’t have a calculator handy, try the Bend Calculator.

So the flat pattern length is 2” + 3” + 0.2201 which is equal to 5.2201. So if you add up the flat length of all
the flanges and add one Bend Allowance for each bend area you have the correct flat length of the part.

But look at the drawing. That is not how we normally


dimension a sheet metal part. The dimensions are usually to
the intersection of the flanges or the Mold Line. This means
that we have to subtract two times the material thickness plus
the bend radius (also known as the Setback) for each bend
area. For this set of dimensions, it would be easier to calculate
the Bend Compensation value. The Bend Compensation value
lets you add up the length of each flange using the Mold Line
dimensions and then add one Bend Compensation per bend
area to the total. Don’t bother with your calculator. Just go to
the Bend Calculator and get the answer. It is -0.1019, a
negative number, which means you will subtract this amount from the total of the flange lengths, 5”, to get
4.8981.

You might also like