SafetySet™

LOCK MANDREL SYSTEM

TRAINING PRESENTATION
 SafetySet™

LOCK MANDREL SYSTEM

 OPERATION
 INSTALLATION
 RETRIEVAL
 SafetySet™

LOCK MANDREL SYSTEM

WHAT IS THE SafetySet SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

   SINGLE APPLICATION   

SURFACE CONTROLLED SUBSURFACE

SAFETY VALVE (SCSSV) INSTALLATIONS
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

WHAT TYPE OF SCSSV’s CAN BE RUN ON THE

SafetySet LOCK
 SafetySet™

LOCK MANDREL SYSTEM

SafetySet IS DESIGNED FOR HALLIBURTON

SUBSURFACE SAFETY VALVES

OR

ANY MANUFACTURER’S CONVENTIONAL

WIRELINE-RETRIEVABLE, SURFACE-
CONTROLLED SUBSURFACE SAFETY
VALVE
 SafetySet™

LOCK MANDREL SYSTEM

WHAT TYPE OF LANDING NIPPLE RECEIVES THE

SafetySet LOCK
 SafetySet™

LOCK MANDREL SYSTEM

1. FOR HALLIBURTON’S ‘RQ’, ‘RP’ and

‘RPT’ PROFILE NIPPLES

2. ANY SAFETY VALVE NIPPLE WITH A

“NO-GO”

3. NOT APPLICABLE TO STAGGER-BORE

NIPPLES*

*FOR SPECIAL APPLICATIONS LIKE STAGGER-BORE

NIPPLES, THE SafetySet LOCK MANDREL CAN BE RUN
WITH THE ‘UP’ RUNNING TOOL.
 SafetySet™

LOCK MANDREL SYSTEM

WHY WAS THE

SafetySet LOCK MANDREL SYSTEM
DESIGNED
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

5 YEARS OF DEVELOPMENT,
SIMULATIONS AND FIELD TESTS

LOW, MODERATE, OR HIGH

FLOW VELOCITIES
 SafetySet™

LOCK MANDREL SYSTEM

CAN ONLY SCSSV’s BE RUN

ON THE LOCK MANDREL
 SafetySet™

LOCK MANDREL SYSTEM

ONLY FOR SCSSV’s

NO TRADEOFFS*

*FOR SPECIAL APPLICATIONS WHERE THE CONTRL

LINE HAS BEEN DAMAGED, THE SafetySet LOCK
MANDREL CAN BE RUN WITH THE ‘UP’ RUNNING TOOL.
 SafetySet™

LOCK MANDREL SYSTEM

WHAT SIZES ARE AVAILABLE

 SafetySet™

Common Sizes Available

• 3 1/2 in. (2.813 Hone Bore I.D.)

• 4 1/2 in. (3.813 Hone Bore I.D.)

• 5 in. (4.000 Hone Bore I.D.)

• 5 1/2 in. (4.562 Hone Bore I.D.)

• 7 in. (5.875 Hone Bore I.D.)

• 7 in. (5.963 Hone Bore I.D.)

CN03698
 SafetySet™

LOCK MANDREL SYSTEM

WHY ARE SMALLER SIZES

NOT DESIGNED
Safety-Set™
™ Lock Mandrel

“NO-GO” SHOULDER

CN03698
 SafetySet™

LOCK MANDREL SYSTEM

FEATURES AND BENEFITS

 SafetySet™

Features and Benefits

• LOCKS IN NIPPLE AFTER

SCSSV IS OPEN

• PROTECTED FROM
UNINTENTIONAL
UNLOCKING

• OPERATING MANUAL

• ELIMINATES POSSIBILITY OF
LEAVING EQUIPMENT
DOWNHOLE WITHOUT
PROPER INSTALLATION

CN03698
Safety-Set™ Lock Mandrel

Locking Sleeve

CN03698
Safety-Set™™ Lock Mandrel

Fish Neck
• Use Standard
Pulling Tool

Internal Profile
• Precision Machined
• Largest I.D.
Available
• Provides Full
Protection For The
Locking Sleeve

CN03698
Safety-Set™ Lock Mandrel

Upper Anti-
Vibration Ring
• Dampens Vibration
• Eliminates Metal-To
Metal Abrasion

Shoulder
• Provides “Snapping”
Effect

Lower Anti-
Vibration Ring

CN03698
Safety-Set™ Lock Mandrel

Running or Locked
Installed Unlocked Position
Position
down
•The Locking Sleeve is in the up
Unlocked
and Locked Position.
Position.
Key are
•The Lock Keys areable to Retract.
Expanded into
•the
Lock Ring Profile.
Nipple holds the Locking Sleeve
•down.
Lock Ring holds the Locking
Sleeve up in the Locked Position.
Safety-Set™ Lock Mandrel

Lock Ring

• Maintains 600 lb./ft.(270 kg)

Grip On Sleeve Stopping
Abrasives Forces Wearing
Components
• Locking Sleeve Locks
In Direction Of
Production Eliminating
Any Flow-Out Possibility

I. SV. VIII. SS. 12

CN02098
Safety-Set™ Lock Mandrel

Stepped O.D.
• More Positive Key
Operation

Internal Profile
• Locking Sleeve Is
Fully Locked Prior To
Running Tool Release

Ports
• Keep Sedimentation
From Causing Pulling
Problems
• Reduced Wireline
Service Time

CN03698
Safety-Set™ Lock Mandrel

“R” Profile Keys

• Three Load-Bearing
Surfaces
• Withstand The Highest
Pressure And Slam
Closure

CN03698
Safety-Set™ Lock Mandrel

Packing Mandrel
• Easy Access To
Packing
• Enlarged Key Windows
• Reduced Maintenance
Time

No-Go Locating
Shoulder
• Accurate Locating
• Reduced Wireline/
Shut-In Time

Packing
• Viton O-Ring
• 25% Moly-Filled Teflon
• Ryton 5800
• Metal Back Up

CN03698
Safety-Set™ Lock Mandrel

Slim Line Buttress

Threads
• Self-Locking
Shoulders
• Adaptable To Any
Wireline Retrievable
SCSSV

CN03698
 SafetySet™

LOCK MANDREL SYSTEM

Benefits Of The
Safety-Set Lock Mandrel
System
It’s From Halliburton
Thoroughly Tested And Proven
Positive Indication Of Proper
Installation -- No Operator
Guesswork
 SafetySet

LOCK MANDREL SYSTEM

WHAT ARE THE FEATURES OF THE

SafetySet RUNNING TOOL
Safety-Set™ Running Tool

• BUILT STRONG

• SIMPLE DESIGN

• RELIABLE

• NO SHEAR PINS

• EFFICIENT, SMOOTH
OPERATION

CN03704
Safety-Set™ Running Tool

Core
• Controlled By Safety Valve Piston
• Running Tool Remains In “Run”
Or “Retrieve” Position Until Valve
Is Pressured Open
• Reduced Wireline Time

Adjustable Core Extension

• Adjusts To Run Any Safety Valve
• Less Service Tools
• Less Logistical Problems
• Total Interchangeability

CN03704
Safety-Set™ Running Tool

Retainer Dogs
• Retain Fish Neck Until
Installation Is Complete
• Designed To Prevent Miss-Sets
• Provide True Reliability

Locking Lugs
• Shift Locking Sleeve Into
Locked Position

Insertion Sleeve
• Installs In Lock Mandrel Either
In Locked Or Unlocked Position
• Reduced Wireline Time

CN03704
 SafetySet™

LOCK MANDREL SYSTEM

WHAT ARE THE FEATURES OF THE

SafetySet UNLOCKING TOOL
Safety-Set™ Unlocking Tool

Threads
• Attach To GR Pulling Tool

Engaging Lugs
• Spring-Biased
• Shift Locking Sleeve To
Unlocked Position Before
Pulling Tool Engagement
• If Fish Neck Is Latched,
Safety-Set Lock Mandrel Is
Unlocked

Spring
• For
Engaging
Lugs

Bottom Sub
• Attaches To Pulling Prong

CN03705
 SafetySet™

LOCK MANDREL SYSTEM

RUNNING PROCEDURE
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

FLUSH OR BELOW,
ALL SET TO GO.
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™
LOCK MANDREL SYSTEM

RUNNING PRONG NOT

REQUIRED
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

LOCK MANDREL IN
LOCKED POSITION
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

Safety-Set™ Lock Mandrel

System

OPERATION
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel Hydraulic
Control
Hydraulic Line
Control Line

Safety Valve
Landing Nipple

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY

CN03700
CN03701
 SafetySet™

LOCK MANDREL SYSTEM

IMPORTANT!
SET THE TOOL STRING WEIGHT ON
THE LOCK AND VALVE
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Fish Neck Held

By Retaining
Dogs
Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY
CN03700
CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line
Keys Fully
Retracted
Safety Valve
Landing Nipple

Locking Sleeve In
Down/Unlocked
Position

Surface Controlled
Subsurface Safety
Valve

STEP 1
STEP 2
LANDED CN03700
CONTROL LINE INTEGRITY CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Piston Is In
Contact
With The
Adjustable
Core Extension

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY
CN03700
CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Locating
Shoulder

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY

CN03700
CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line
Control Line
Integrity
Safety Valve Established
Landing Nipple

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY CN03700
CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Hydraulic
Pressure
To Piston
Chamber
Surface Controlled Piston
Subsurface Safety
Valve Moves
Down

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY
CN03700
CN03701
 Installation Sequence

JAR DOWN

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Core
Drops

Surface Controlled
Subsurface Safety
Valve

STEP 1 STEP 2
LANDED CONTROL LINE INTEGRITY
CN03700
CN03701
 Installation Sequence

JAR UP

Safety-Set™
Running Tool

Safety-Set™
Hydraulic
Lock Mandrel
Control
Line
Hydraulic
Control Line
Lock Ring
Grips
Safety Valve Locking Sleeve
Landing Nipple
Locking Sleeve
Moves Up In
Locking Position

Surface Controlled
Subsurface Safety
Valve

STEP 2 STEP 3
CONTROL LINE LOCKED
CN03701
INTEGRITY CN03702
 Installation Sequence

JAR UP

Safety-Set™
Running Tool

Safety-Set™
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve Locking

Landing Nipple Lugs
Retract

Surface Controlled
Subsurface Safety
Valve

STEP 2 STEP 3
CONTROL LINE INTEGRITY LOCKED
CN03701
CN03702
 Installation Sequence

JAR UP

Safety-Set™
Running Tool

Retainer
Dogs
Release
Safety-Set™ Fish Neck
Lock Mandrel
Hydraulic
Control Line
Hydraulic
Control Line

Safety Valve
Landing Nipple

Surface Controlled
Subsurface Safety
Valve

STEP 2 STEP 3
CONTROL LINE INTEGRITY LOCKED
CN03701
CN03702
Safety-Set™ Lock Mandrel

Installed
Safety-Set
Lock Mandrel

Safety Valve
Landing Nipple

Surface-Controlled
Subsurface Safety
Valve

CN03699
Running Procedure

Step 1 - JAR DOWN

Step 2 - PRESSURE
CONTROL LINE
Step 3 - JAR UP
 SafetySet™

LOCK MANDREL SYSTEM

PULLING PROCEDURE
 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

 SafetySet™

LOCK MANDREL SYSTEM

BALL-TYPE CLOSURE
SHORTEN LENGTH OF PRONG
EXTENSION AND RETHREAD
 SafetySet™

LOCK MANDREL SYSTEM

CONTROL LINE PRESSURE ALONE

DOES NOT ENSURE VALVE IS
OPEN AND EQUALIZED
 SafetySet™

LOCK MANDREL SYSTEM

CAUTION!
EQUALIZE THE SAFETY VALVE
Retrieving

1st 2nd

JAR DOWN JAR UP

GR
Pulling Tool

Safety-Set™
Lock Mandrel

Safety-Set
Unlocking Tool

Engaging Lugs Contact

Locking Sleeve
Safety Valve
Landing Nipple

Pulling Prong

Surface- Controlled
Subsurface
Safety Valve

CN03703
Retrieving

1st 2nd

JAR DOWN JAR UP

GR
Pulling Tool

Pulling Tool Engages Only After

Locking Sleeve Is Completely
Unlocked
Safety-Set™
Lock Mandrel

Safety-Set
Unlocking Tool

Engaging Lugs Contact

Locking Sleeve
Safety Valve
Landing Nipple
Locking Sleeve Moves Down
In Unlocked Position
Pulling Prong

Surface- Controlled
Subsurface
Safety Valve

CN03703
 SafetySet™

LOCK MANDREL SYSTEM

GR PULLING TOOL
JAR LIGHTLY TO PREVENT
PREMATURE SHEARING
 SafetySet™

LOCK MANDREL SYSTEM

GS PULLING TOOL
USE ONLY
WITHOUT
UNLOCKING TOOL
 SafetySet™

LOCK MANDREL SYSTEM

CAUTION
UNLOCKING TOOL WON’T PERMIT
GS PULLING TOOL TO SHEAR
 SafetySet™

LOCK MANDREL SYSTEM

PRINCIPLE OF OPERATION
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL

SAFETYSET
LOCK MANDREL

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL

SAFETYSET
LOCK MANDREL

Running
Tool Core
Safety Valve
Piston

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL
Pin
Core

Dog Retainer

SAFETYSET
LOCK MANDREL

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL

Retainer Dogs
Fish Neck

SAFETYSET
LOCK MANDREL

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL

Top Sub

Transfer Lugs in
Receiving Groove

Core
Lower Setting Sleeve

SAFETYSET
LOCK MANDREL

No Control Line
Pressure

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE (CLOSED)
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
RUNNING TOOL

Top Sub

Transfer Lugs Locked Out

Receiving Groove

Core Moved Down

Lower Setting Sleeve

SAFETYSET
LOCK MANDREL
Locking Keys

SCSSV LANDING NIPPLE

Valve Piston
Hydraulic Pressure
Pumping Valve Open

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE (OPEN)
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
JAR UP
RUNNING TOOL

Top Sub

Lower Setting Sleeve

Locking Sleeve Shoulder

Lock Ring
Locking Keys
Locking Sleeve
SAFETYSET
LOCK MANDREL
SCSSV LANDING NIPPLE

Control Line Pressure

Applied

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE (OPEN)
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
JAR UP
RUNNING TOOL

Lower Setting Sleeve

SAFETYSET
LOCK MANDREL
Locking Sleeve Shoulder
Lock Ring
Receiving Groove
Locking Sleeve
Running Tool Locking Lugs

Running Tool Core

SCSSV LANDING NIPPLE

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE (OPEN)
SafetySet™

LOCK MANDREL
SYSTEM

SAFETYSET
JAR UP
RUNNING TOOL

Lower Setting Sleeve

Retainer Dogs Retracted
into Receiving Groove
SAFETYSET
LOCK MANDREL
Locking Sleeve Shoulder
Lock Ring
Receiving Groove

Running Tool Locking Lugs

Running Tool Core

SCSSV LANDING NIPPLE

SURFACE CONTROLLED
SUBSURFACE SAFETY
VALVE (OPEN)
 SafetySet™

LOCK MANDREL SYSTEM

RUNNING TOOL
INSTALLATION WITH
LOCK MANDREL

LOCKED OR UNLOCKED
POSITION
Safety-Set™ Unlocking Tool

Unlocking Lugs

Springs

CN03705
 Safety-Set™

Lock Mandrel System

Requires Two Independent

Conditions:

• Valve Must Be Pressured Open

To Pull Locking Sleeve Upward

•Only When Locking Sleeve

Is Locked, Is The Running Tool
Designed To Release From Lock
Mandrel And Safety Valve
 SafetySet™

LOCK MANDREL SYSTEM

CAN THE SafetySet LOCK MANDREL

BE SET IN WELLS WHERE THE
OPERATOR HAS LOST CONTROL
LINE INTEGRITY
OR
IN STAGGER-BORE LANDING NIPPLES
 SafetySet™

LOCK MANDREL SYSTEM

WHAT IS A STAGGER-BORE LANDING

NIPPLE

IS IT ANYTHING LIKE TAPERED-BORE

LANDING NIPPLES
HYDRAULIC
CONTROL LINE

FLOW COUPLING
TUBING-RETRIEVABLE
SAFETY VALVE WITH
NO-GO NIPPLE PROFILE Large Bore
FLOW COUPLING
Single String
FLOW COUPLING
Completion With
TAPERED NO-GO
LANDING NIPPLE
Tapered No-Go
FLOW COUPLING Nipples
OVERSHOT TUBING SEAL DIVIDER WITH
EXTENDED STROKE AND NO-GO NIPPLE
IN TOP OF MALE MEMBER

RATCH-LATCH® LOCATOR
OR RUNNING TOOL
PERMANENT PACKER WITH
RATCH-LATCH® RECEIVER HEAD

MILLOUT EXTENSION
ADAPTER
TUBING OR PUP JOINT
TAPERED NO-GO LANDING NIPPLE

PERFORATED PUP
TAPERED NO-GO LANDING NIPPLE

WIRELINE
RE-ENTRY GUIDE
Stagger-Bore Landing Nipple

Safety-Set
Lock Mandrel

Safety Valve
Landing Nipple

2.875 Packing Bore

Surface-Controlled
Subsurface Safety
Valve
2.813 Packing Bore

CN03699
 SafetySet™

Stagger-Bore System

Procedure Change-
• Mandrel Is Locked Before
Pressuring Control Line
• All Other Procedures
Remain The Same

Procedure Change-
• Negates Effect Of Position
Check Prior To Locking
• Does Not Confirm
Operational System Prior
To Locking
• Negates Effect Of Position
Retrieving Heavy Assemblies
CN00233

I. SV. VIII. SS. 20

CN02094
SafetySet™ Running Tool

NOT APPLICABLE TO
STAGGER-BORE NIPPLES*

ONLY FOR SCSSV’s

NO TRADEOFFS*

*FOR SPECIAL APPLICATIONS WHERE

THE CONTRL LINE HAS BEEN DAMAGED,
THE SafetySet LOCK MANDREL CAN BE
RUN WITH THE ‘UP’ RUNNING TOOL.

CN03704
 SafetySet™

‘UP’ RUNNING TOOL

UP RUNNING TOOL

SafetySet
LOCK MANDREL
 SafetySet™

‘UP’ RUNNING TOOL

UP RUNNING TOOL

Shear Pin

Retainer Lugs

SafetySet
LOCK MANDREL

Locking Lugs
 SafetySet™

‘UP’ RUNNING TOOL

UP RUNNING TOOL

Shear Pin Sheared

Retainer Pin

Retainer Lugs

Core

SafetySet
LOCK MANDREL

Locking Lugs
 SafetySet™

‘UP’ RUNNING TOOL

UP RUNNING TOOL

Shear Pin Sheared

Retainer Pin

Retainer Lugs Retracted

Core

SafetySet
LOCK MANDREL

Receiving Groove
Locking Lugs Retracted