Sensortechnik GmbH

mc
Thermal Micro Control

Thermistors Series MF1

Features

• Characteristic curve according to DIN 44081

•
Resistance R 25 < 100 Ohm

•
Mounting in windings of electrical motors and
transformers for the monitoring of limit temperatures

• Miniature construction/external diameter

=/> 3mm depending on insulation

• Protection paint coat against chemical influences

• Extended range of temperature up to 190°C

• 100%-controlled production/ the resistance R 25 and

the nominal response temperature of each component
is proved.
Description

• The thermistors construction corresponds,

PTC Thermistors are temperature-sensitive ceramic
concerning strength and insulation,
semi-conductor resistors with a positive temperature
to the requirements for mounting in copper windings.
coefficient.
The PTC-sensors change their resistance, when
•
reaching the nominal temperature precipitously.
Customer designed solutions can be realized cost-
Within changes of temperature of only 10K arise
saving.
changes of resistance larger than 1kOhm.
PTCs will be mounted on a releasing tool, which
•
changes gear over a relais after reaching the nomi-
Quick and confidently response action
nal response temperature.

TTMC Sensortechnik GmbH · Westliche Gewerbestr. 3 · D - 75015 Bretten · Tel.: + 49 / (0)72 52 / 94 31 - 0 · Fax: 94 31 31
 Technical data Dimensions (in mm)
Single Triplet
[Link] voltage U max. 30V
Nominal temperature ϑNAT 60°C to 190°C
Tolerance about ϑNAT ± 5K
Reproducability about ϑNAT ± 5K
Resistance at 25°C 1
≤ 100 Ω ≤ 300 Ω
Resistance at ϑNAT - T 1
≤ 550 Ω ≤ 1650 Ω
Resistance at ϑNAT + T 1
≥ 1330Ω ≥ 3990 Ω
Resistance at ϑNAT + 15 K 2
≥ 4 kΩ ≥ 12 kΩ
Thermal reaction time <5s
insulation strength 2,5 kV
Max. working temperature 200 °C
ambient temperature - 25°C to 200°C
1)
Tension continue ≤ 1,5 V Standard lead: Teflon stranded wire, AWG 26 = 0,14 mm²,
colour according to the nominal temperature.
2)
Tension continue ≤ 7,5 V
Connecting lead in yellow

Resistance - temperature - characteristic curve Marking and order codes

Typical curve R(ϑ) of a PTC-thermistor according to DIN 44081
TN colour Single Triplet
60 white/grey MF1-E060 MF1-D060
R 70 white/brown MF1-E070 MF1-D070
80 white/white MF1-E080 MF1-D080
90 green/green MF1-E090 MF1-D090
4000
100 red/red MF1-E100 MF1-D100
110 brown/brown MF1-E110 MF1-D110
1330 120 grey/grey MF1-E120 MF1-D120
130 blue/blue MF1-E130 MF1-D130
550
140 white/blue MF1-E140 MF1-D140
250 145 white/black MF1-E145 MF1-D145
150 black/black MF1-E150 MF1-D150
155 blue/black MF1-E155 MF1-D155
160 blue/red MF1-E160 MF1-D160
ϑ 170 white/green MF1-E170 MF1-D170
ϑNAT+15K
ϑNAT+5K
ϑNAT- 5K

180 white/red MF1-E180 MF1-D180

ϑNAT

190 black/grey MF1-E190 MF1-D190

The characteristic curve points are no-load resistance values.
Self-heating has to be avoided. If necessary, pulsating voltage
has to be worked with. At temperatures below -20°C the PTC
thermistor is able to accept resistance values exceeding
250 Ω.

Installation advices Order example for special types

Basically PTC thermistors have to be installed parallely to the MF1- V150- 250/ 100/180/....
winding wires Air inclusion influences thermal direct coupling lead length L2 (100 mm), L3 ...
lead length L1 (250 mm)
negatively and should therefore be avoided. Nominal temperature NAT (150 °C)
The PTC thermistor’s mechanical wear during the forming of Cabling (quadruplet)*
the end windings can be reduced by correct installation.. Series

* Cabling: E: single , Z: double, D: triple; V: quadruplet,

S: sextuplets, N: ninefold
All rights reserved. We reserve the right to modify specification and dimensions. Regarding the
Because TMC has no access to the details of the application, respectively, TMC is not information of this brochure there can't lay claim of liability or to acceptance
able to take any liability for perhaps improper use of the PTC or for the violation of the guarantee.
claims of others, patent violation for example.. This new data sheet obsoletes all previous issues.
Stand 06/10

TMC Sensortechnik GmbH · Westliche Gewerbestr. 3 · D - 75015 Bretten · Tel.: + 49 / (0)72 52 / 94 31 - 0 · Fax: 94 31 31