Scribd
Upload
1K views1 page

1 Humbucker, 4 Conductor, Push Pull Volume Pot With Coil Split Wiring

This document describes the wiring diagram for a guitar pickup with 1 humbucker pickup, a 4 conductor cable, and a push pull volume potentiometer that splits the humbucker coils. The push pull volume pot splits the humbucker coils so that when pulled out it uses the slug coil only, and when pushed in it uses both coils in series for standard humbucking operation.

Uploaded by

R2F23L
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

1 Humbucker, 4 Conductor, Push Pull Volume Pot With Coil Split Wiring

This document describes the wiring diagram for a guitar pickup with 1 humbucker pickup, a 4 conductor cable, and a push pull volume potentiometer that splits the humbucker coils. The push pull volume pot splits the humbucker coils so that when pulled out it uses the slug coil only, and when pushed in it uses both coils in series for standard humbucking operation.

Uploaded by

R2F23L
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

1 Humbucker, 4 Conductor, Push Pull Volume Pot with Coil Split Wiring

Bridge Ground Wire


Volume
500k
Push Pull
KEY:

Solder Joint

Ground Connection
(usually soldered to
back of volume pot)

Red
Jack
Switch Push Pull Positions: Socket
ThroBak Green 1 - Switch pulled out: slug coil only
Bridge Pickup 2 - Switch pushed in: both coils in series
(standard humbucking operation)
White

Black

Bare

You might also like