ANNUAL SERVICE CONTACT
QUARTER-
CUSTOMER NAME : DATE:
Topic Check Comments
Nozzle cleaning
All belts cleaning/check
Heat exchanger cleaning
Exhaust fan/Ducting cleaning
Chain tension check and clean
Filter cleaning
Control cabinet/Panel cleaning
Sensors, reflectors cleaning and
check
All rollers check
E+L bending limit switch check
Spring tension check
Chain oil check
Lubricating the bearing
Lubricating the gear
Load cell calibration
Pleva calibration
Centering unit calibration
Width adjustment
Padder pressure adjustment
Nozzle potentiometer adjustment
Blower belts tension checking
Additional works Check Comments
Required spare parts list :
𝑪𝒖𝒔𝒕𝒐𝒎𝒆𝒓 𝒔𝒊𝒈𝒏𝒂𝒕𝒖𝒓𝒆 𝑬𝒏𝒈𝒊𝒏𝒆𝒆𝒓 𝒔𝒊𝒈𝒏𝒂𝒕𝒖𝒓𝒆