Coordination tables

1SDC007004D0204
 Coordination tables
Index

Introduction ................................................................................................................... I
Back-up .................................................................................................................... 1/1
Discrimination ........................................................................................................... 2/1
Motor protection ....................................................................................................... 3/1
Switch-disconnectors ............................................................................................... 4/1

ABB SACE
 Coordination tables
Introduction

Discrimination and back-up ......................................................................................... II

Choosing the type of coordination for protection of a low voltage installation ...... II
Types of coordination ............................................................................................. III
General notes on switching and protection of motors .............................................. VIII

Electromechanical starter .................................................................................... VIII

Starting methods ................................................................................................... IX
Switch-disconnectors ................................................................................................ XII

ABB SACE I
 Coordination tables
Discrimination and back-up

This collection of selectivity and back-up tables for ABB circuit-breakers has been
studied to help select the appropriate circuit-breaker, fulfilling the specific selectivity
and back-up requirements according to the different types of installation.
The tables are divided on the basis of the type of intervention (back-up or selective
protection), and are grouped according to types of circuit-breakers (air, moulded-
case, and miniature), covering all the possible combinations of ABB circuit-breakers.
The technical data, updated to the latest series of miniature, moulded-case and air
circuit breakers on the market, make this publication a comprehensive and simple
tool: once again, ABB SACE makes its consolidated experience in the Low Voltage
sector available to professionals.

Choosing the type of coordination for protection of a low voltage installation

Problems and requirements for coordinating protection devices
Selection of the system for protecting an electric installation is of paramount
importance both to ensure correct economic and functional operation of the whole
installation and to reduce any problems caused by anomalous operating conditions
and actual faults to a minimum.
This analysis deals with coordination between the different devices dedicated to
protection of zones and specific components in order to:
– guarantee safety for people and the installation at all times;
– identify and rapidly exclude only the zone affected by a given problem, instead of
taking indiscriminate action thereby reducing the energy available in areas
unaffected by the fault;
– reduce the effects of a fault on other sound parts of the installation (voltage drops,
loss of stability in rotating machines);
– reduce the stress on components and damage in the zone involved;
– ensure service continuity with good quality power supply voltage;
– guarantee adequate backup in the event of any malfunction of the protection device
responsible for opening the circuit;
– provide maintenance personnel and the management system with the information
needed to restore the service as rapidly as possible and with minimal disturbance to
the rest of the network;
– achieve a valid compromise between reliability, simplicity and cost effectiveness.
To be more precise, a valid protection system must be able to:
– understand what and where an event has occurred, discriminating between
situations that are anomalous but tolerable and genuine faults within a given zone of
influence, avoiding unwarranted trips which lead to unjustified stoppage of a sound
part of the installation;
– act as rapidly as possible to limit damage (destruction, accelerated ageing, etc.),
safeguarding continuity and stability of the power supply.
The solutions stem from a compromise between the following two opposing needs -
precise identification of the fault and rapid intervention - and are defined according to
which requirement takes priority.
For instance, when it is more important to avoid unnecessary tripping, it is generally
preferable to have an indirect protection system based on interlocks and data
transmission between different devices which measure the electrical values locally,
whereas for prompt response and limitation of the destructive effect of short-circuits, a
direct-acting system with releases integrated in the devices is needed. Generally
speaking, in low voltage systems for primary and secondary distribution, the latter
solution is preferable.

II ABB SACE
 Coordination tables
Discrimination and back-up

Restricting the field to an analysis of the problem of how to harmonize the action of
the protection devices in the event of overcurrents (overloads and short-circuits) - a
problem covering 90% of the coordination requirements of protection devices in radial
low voltage installations - it is important to remember that:
– overcurrent trip selectivity means “coordination of the operating characteristics of
two or more overcurrent protection devices so that, on occurrence of overcurrents
within established limits, the device supposed to operate within these limits
intervenes, whereas the others do not”1;
– total discrimination means “overcurrent selectivity so that when there are two
overcurrent protection devices in series, the protection device on the load side
provides protection without tripping the other protection device” 2;
– partial discrimination means “overcurrent selectivity so that when there are two
overcurrent protection devices in series, the protection device on the load side
provides protection up to a given overcurrent limit without tripping the other device” 3.
This overcurrent threshold is called the “selectivity limit current I s”4;
– back-up protection means “coordination for protection against overcurrents of two
protection devices in series, where the protection device generally (but not necessarily)
situated on the supply side provides overcurrent protection with or without the aid of the
other protection device and avoids excessive stress on the latter” 5. The current value
above which protection is ensured is called the “switching current I B”6.

Types of coordination
Influence of the electrical parameters of the installation (rated current and
short-circuit current)
If the analysis is restricted to the behaviour of the protection devices with tripping
based on overcurrent releases, the strategy used to coordinate the protection devices
mainly depends on the rated current (In) and short-circuit current (Ik) values in the part
of installation concerned.
Generally speaking, the following types of coordination can be classified:
– current type selectivity;
– time type selectivity;
– zone selectivity;
– energy selectivity;
– back-up.
Now let us examine these various solutions in detail.

1IEC 60947-1 Standard, def. 2.5.23

2IEC 60947-2 Standard, def. 2.17.2
3IEC 60947-2 Standard, def. 2.17.3
4IEC 60947-2 Standard, def. 2.17.4
5IEC 60947-1 Standard, def. 2.5.24
6IEC 60947-1 Standard, def. 2.5.25 and IEC 60947-1 Standard, def. 2.17.6

ABB SACE III

 Coordination tables
Discrimination and back-up

Current type selectivity

This type of discrimination is based on the observation that the closer the fault is to
the power supply of the installation, the higher the short-circuit current will be. We can
therefore pinpoint the zone where the fault has occurred can therefore be
discriminated simply by setting the protection devices to a limit value so that this does
not generate unwarranted trips due to faults in the zone of influence of the protection
device immediately to the load side (where the fault current must be lower than the
current threshold set on the protection device on the supply side).
Total discrimination can normally only be obtained in specific cases where the fault
current is not very high or where a component with high impedance is placed between
the two protection devices (e.g. a transformer, a very long cable, or a cable with
reduced cross-section, etc.) giving rise to a great difference between the short-circuit
current values.
This type of coordination is therefore mainly used in end distribution (with low rated
current and short-circuit current values and high impedance of the connection cables).
The device time-current trip curves are generally used for the study.
This solution is intrinsically rapid (instantaneous), easy to implement and inexpensive.
On the other hand:
– the selectivity limit current is normally low, so discrimination is often only partial;
– the threshold setting of the overcurrent protection devices rapidly exceeds the
values consistent with safety requirements, becoming incompatible with the need to
reduce damage caused by short-circuits;
– it becomes impossible to provide redundant protection devices which can guarantee
elimination of the fault in the event of any of the protection devices failing to function.

Time type selectivity

This type of discrimination is an evolution of the previous one. Using this type of
coordination, in order to define the trip threshold, the current value measured is
associated with the duration of the phenomenon: a given current value will trip the
protection devices after an established time delay, which is such as to allow any
protection devices situated closer to the fault to trip, excluding the zone where the
fault occurred.
The setting strategy is therefore to progressively increase the current thresholds and
the trip time delays the closer one is to the power supply source (the setting level
correlates directly with the hierarchical level). The steps between the time delays set
on protection devices in series must take into account the sum of the times for
detecting and eliminating the fault and the overshoot time of the supply side device
(the time interval during which the protection device can trip even if the phenomenon
has already ended). As in the case of current type selectivity, the study is carried out
by comparing the time-current protection device trip curves.
This type of coordination is generally:
– easy to study and implement, and inexpensive with regard to the protection system;
– it allows even high limit discrimination levels to be obtained, depending on the
shorttime withstand current of the supply side device;
– it allows redundant protection functions and can send valid information to the
control system;
but:
– the trip times and energy levels let through by the protection devices, especially
those close to the sources, are high, with obvious problems regarding safety and
damage to the components (often oversized) even in zones unaffected by the fault;
– it only allows use of current-limiting circuit-breakers at levels hierarchically lower down
the chain. The other circuit-breakers must be capable of withstanding the thermal and
electro-dynamic stresses related to the passage of the fault current for the intentional

IV ABB SACE
 Coordination tables
Discrimination and back-up

time delay. Selective circuit-breakers, often of the open type, must be used for the
various levels (category B circuit-breakers according to the IEC 60947-2 Standard)
to guarantee a sufficiently high short-time withstand current;
– the duration of the disturbance induced by the short-circuit current on the power
supply voltages in the zones unaffected by the fault can pose problems with
electromechanical (voltage below the electromagnetic release value) and electronic
devices;
– the number of discrimination levels is limited by the maximum time which can be
withstood by the electrical system without loss of stability.

Zone (or logical) selectivity

This type of coordination is a further evolution of time coordination and can be direct
or indirect. Generally speaking, it is implemented by means of a dialogue between
currentmeasuring devices which, when they detect that the setting threshold has been
exceeded, enable correct identification and power supply disconnection of just the
zone affected by the fault.
It can be implemented in two ways:
– the measuring devices send information to the supervision system about the fact
that the set current threshold has been exceeded and the latter decides which
protection device to trip;
– when there are current values over the set threshold, each protection device sends
a blocking signal via a direct connection or a bus to the protection device higher in
the hierarchy (i.e. on the supply side in relation to the direction of the power flow)
and, before it trips, makes sure that a similar blocking signal has not arrived from
the protection device on the load side. This way, only the protection device
immediately to the supply side of the fault is tripped.
The first mode has trip times of around 0.5-5 s and is mainly used in the case of not
particularly high short-circuit currents with a power flow direction not unequivocally
defined (e.g. for lighting systems in long road and rail tunnels).
The second mode has distinctly shorter trip times: compared with time type
coordination, there is no longer any need to increase the intentional time delay
progressively as you move closer to the power supply source. The delay can be
reduced to a waiting time sufficient to rule out any presence of a block signal from the
protection device on the load side (time taken by the device to detect the anomalous
situation and successfully complete transmission of the signal).
Compared with time type coordination, zone selectivity implemented in this way:
– reduces the trip times and increases the safety level. The trip times can be around a
hundred milliseconds;
– reduces both the damage caused by the fault and the disturbance to the power
supply network;
– reduces the thermal and dynamic stresses on the circuit-breakers;
– allows a very high number of discrimination levels;
but it is more burdensome both in terms of costs and in the complexity of the installation.
This solution is therefore mainly used in systems with high rated current and shortcircuit
current values, with inescapable needs both in terms of safety and service continuity: in
particular, examples of logical discrimination are often found in primary distribution
switchgear, immediately to the load side of transformers and generators.
Another interesting application is the combined use of zone and time type selectivity,
in which the stretches of the coordination chain managed logically have protection
device trip times for short-circuits which decrease progressively moving up towards
the power supply sources. The zone selectivity function is available with:
– Emax circuit-breakers equipped with PR122/P and PR123/P electronic releases
– Tmax circuit-breakers equipped with PR223EF electronic releases.
For further information, please consult the specific technical catalogues.

ABB SACE V
 Coordination tables
Discrimination and back-up

Energy-based selectivity
Energy-based coordination is a particular type of selectivity which exploits the
currentlimiting characteristics of moulded-case circuit-breakers. It is important to
remember that a current-limiting circuit-breaker is “a circuit-breaker with a trip time
short enough to prevent the short-circuit current reaching the peak value it would
otherwise reach”7.
In practice, all the ABB SACE moulded-case circuit-breakers in the Isomax and Tmax
ranges have more or less accentuated current-limiting features, obtained by:
– reaching a valid compromise between the capacity of the release to withstand
current values lower than the instantaneous trip thresholds and the repulsion of the
main contacts at short-circuit currents;
– triggering rapid displacement of the arc inside the arcing chambers (magnetic blast)
suitably designed to generate a high arcing voltage;
– placing several arcing chambers in series, with contacts optimised to carry out
different functions (main opening under short-circuit, backup opening with the
principal function of isolation and opposition to the recovery voltage, etc.).
Under short-circuit conditions, these circuit-breakers are extremely rapid (with trip
times of a few milliseconds) and open in the event of a strong asymmetric component.
It is therefore not possible to use the time-current trip curves (load side circuit-
breaker) and no trip limit curves (supply side circuit-breaker), obtained with
symmetrical sine wave forms, to study the coordination. The phenomena are mainly
dynamic (and therefore proportional to the square of the instantaneous current value)
and can be described using the specific let-through energy and no trip limit energy
curves of the supply side circuit-breaker.
What generally happens is that the energy associated with the load side circuit-
breaker trip is lower than the energy value needed to complete the opening of the
supply side circuit-breaker. To ensure a good level of reliability, avoiding any
oversizing or transient contact repulsion phenomena in the circuit-breaker on the
supply side, this calculation should be integrated with additional information, such as
the current limiting curves (peak Ip value - prospective value of the symmetrical
component of the short-circuit current) and the setting for contact repulsion.
This type of selectivity is certainly more difficult to consider than the previous ones
because it depends largely on the interaction between the two devices placed in series
(wave forms, etc.) and requires access to data often unavailable to the end user.
Manufacturers provide tables, slide rules and calculation programs in which the limit
selectivity current values Is under short-circuit conditions between different
combinations of circuit-breakers are given. These values are defined by theoretically
integrating the results of a large number of tests performed in compliance with the
requirements of appendix A of the IEC 60947-2 Standard.
The advantages of using this type of coordination include:
– breaking is fast, with trip times which become shorter as the short-circuit current
increases. This consequently reduces the damage caused by the fault (thermal and
dynamic stresses), the disturbance to the power supply system, the sizing costs,
etc.;
– the discrimination level is no longer limited by the value of the short-time current Icw
withstood by the devices;
– a large number of hierarchically different levels can be coordinated;

7 IEC 60947-2 Standard, def. 2.3

VI ABB SACE
 Coordination tables
Discrimination and back-up

– different current-limiting devices (fuses, circuit-breakers, etc.) can be coordinated,

even when located in intermediate positions along the chain.
This type of coordination is used above all for secondary and final distribution, with
rated currents below 1600 A.

Back-up protection
With backup protection, discrimination is sacrificed in favour of the need to help the
load side devices which have to interrupt short-circuit currents beyond their breaking
capacity. In this case, over and above the switching current IB, simultaneous opening
of both the protection devices placed in series or, alternatively, of just the supply side
circuit-breaker (a somewhat rare case, typical of a configuration consisting of a supply
side circuit-breaker and a load side isolator).
Manufacturers provide tables derived from tests based on the previously-mentioned
appendix A of the IEC 60947-2 Standard.
These combinations can be calculated according to the instructions given in section
A.6.2 of the above standard, comparing:
– the value of the Joule integral of the device protected at its breaking capacity with
that of the supply side device at the prospective current of the association
(maximum short-circuit current for which backup protection is provided);
– the effects induced in the load side device (e.g. by the arcing energy, maximum
peak current and limited current) at the peak current value during operation of the
protection device against a supply side short-circuit.

Conclusions
Technically a large number of solutions can be realised regarding coordination of the
protection devices in an installation.
Selecting which type of coordination to use in the various zones of the installation is
strictly linked to installation and design parameters and stems from a series of
compromises so that the objectives required in terms of reliability and availability are
achieved keeping the costs and limiting the risks within acceptable limits.
The designer’s task is to choose a solution, for the various installation zones, from
among those available which offers the best balance between technical and financial
requirements according to:
– functional and safety requirements (acceptable risk levels) and reliability (availability
of the installation);
– the reference value of the electrical values;
– the costs (protection devices, control systems, interconnection components, etc.);
– the effects, the admissible duration and the cost of electrical disservices;
– any future evolution of the system.
For each of the proposed solutions, there is a combination of ABB products which can
meet these requirements.

ABB SACE VII

 Coordination tables
General notes on motor protection and switching

Electromechanical starter

The starter is designed to:

– start motors;
– ensure continuous functioning of motors;
– disconnect motors from the supply line;
– guarantee protection of motors against working overloads.
The starter is typically made up of a switching device (contactor) and an overload
protection device (thermal release).
The two devices must be coordinated with equipment capable of providing protection
against short-circuit (typically a circuit breaker with magnetic release only), which is
not necessarily part of the starter.
The characteristics of the starter must comply with the international Standard IEC
60947-4-1, which defines the above as follows:
Contactor: a mechanical switching device having only one position of rest, operated
otherwise than by hand, capable of making, carrying and breaking currents under
normal circuit conditions including operating overload conditions.
Thermal release: thermal overload relay or release which operates in the case of
overload and also in case of loss of phase.
Circuit-breaker: defined by IEC 60947-2 as a mechanical switching device, capable
of making, carrying and breaking currents under normal circuit conditions and also
making, carrying for a specified time and breaking currents under specified abnormal
circuit conditions.
The main types of motor which can be operated and which determine the
characteristics of the starter are defined by the following utilization categories:

Table 1: Utilization categories and typical applications

Current type Utilization Typical applications
categories
AC-2 Slip-ring motors: starting, switching off
AC-3 Squirrel-cage motors: starting,
Alternating current AC switching off during running (1)
AC-4 Squirrel-cage motors:
starting, plugging, inching
(1) AC-3 categories may be used for occasionally inching or plugging for limited time periods such as
machine set-up; during such limited time periods the number of such operations should not exceed five
per minutes or more than ten in a 10 minutes period.

The choice of the starting method and also, if necessary, of the type of motor to be
used depends on the typical resistant torque of the load and on the short-circuit
power of the motor supplying network.
With alternating current, the most commonly used motor types are as follows:
– asynchronous three-phase squirrel-cage motors (AC-3): the most widespread type
due to the fact that they are of simple construction, economical and sturdy; they
develop high torque with short acceleration times, but require elevated starting
currents;
– slip-ring motors (AC-2): characterized by less demanding starting conditions, and
have quite a high starting torque, even with a supply network of low power.

VIII ABB SACE

 Coordination tables
General notes on motor protection and switching

Starting methods

The most common starting methods for asynchronous squirrel-cage motors are
detailed below.

Direct starting (DOL)

With direct starting, the DOL (Direct On Line) starter, with the closing of line contactor
KL, the line voltage is applied to the motor terminals in a single operation. Hence a
squirrel-cage motor develops a high starting torque with a
relatively reduced acceleration time. This method is generally
used with small and medium power motors which reach full
working speed in a short time.
These advantages are, however, accompanied by a series of
MCCB
drawbacks, including, for example:
– high current consumption and associated voltage drop
which may cause damages to the other parts of the system
connected to the network; KL

– violent acceleration which has negative effects on

mechanical transmission components (belts, chains and
mechanical joints), reducing working life. TOR
Other types of starting for squirrel-cage motors are
accomplished by reducing the supply voltage of the motor:
MOTOR
this leads to a reduction in the starting current and of the
motor torque, and an increase in the acceleration time.

Star-Delta starter (Y-∆)

The most common reduced voltage starter is the Star-Delta starter (Y-∆), in which:
– on starting, the stator windings are star-connected, thus achieving the reduction of
peak inrush current;
– once the normal speed of the motor is nearly reached, the switchover to delta is
carried out.
After the switchover, the current and the torque
follow the progress of the curves associated with
normal service connections (delta).
As can be easily checked, starting the motor MCCB
with star-connection gives a voltage reduction
of ∆3, and the current absorbed from the line is
reduced by 1/3 compared with that absorbed
with delta-connection. KL K∆
The start-up torque, proportional to the square
of the voltage, is reduced by 3 times, KY
compared with the torque that the same motor TOR
would supply when delta-connected.
This method is generally applied to motors
MOTOR
with power from 15 to 355 kW, but intended to
start with a low initial resistant torque.

ABB SACE IX
 Coordination tables
General notes on motor protection and switching

Starting sequence
By pressing the start button, contactors KL and KY are closed. The timer starts to
measure the start time with the motor connected in star. Once the set time has
elapsed, the first contact of the timer opens the KY contactor and the second contact,
delayed by approximately 50-80 ms, closes the K∆ contactor.
With this new configuration, contactors KL and K∆ closed, the motor becomes
deltaconnected.
The thermal release TOR, inserted in the delta circuit, can detect any 3rd harmonic
currents, which may occur due to saturation of the magnetic pack and by adding to
the fundamental current, overload the motor without involving the line.
With reference to the connection diagram, the equipment used for a Star/Delta starter
must be able to carry the following currents:

Ie KL line contactor and K∆ delta contactor

∆3
Ie KY star contactor

3
Ie overload protection release

∆3

where Ie is the rated current of the motor.

With reference to the previously-mentioned Standard, the starter can be classified

according to the tripping time (Trip Class) and to the coordination type implemented
by means of a protection device against short-circuit (Type 1 and Type 2).

Trip classes
The trip classes differentiate between the thermal releases according to their trip curve.
The trip classes are defined in the following table 2:

Table 2: Trip class

Trip Class Trip time in seconds (Tp)
10 A 2 < Tp ∆ 10
10 4 < Tp ∆ 10
20 6 < Tp ∆ 20
30 9 < Tp ∆ 30

where Tp is the cold trip time of the thermal release at 7.2 times the set current value
(for example: a release in class 10 at 7.2 times the set current value must not trip
within 4 s, but must trip within 10 s).
It is normal procedure to associate class 10 with a normal start-up type, and class 30
with a heavy duty start-up type.

X ABB SACE
 Coordination tables
General notes on motor protection and switching

Coordination type
Type 1
It is acceptable that in the case of short-circuit the contactor and the thermal release
may be damaged. The starter may still not be able to function and must be inspected;
if necessary, the contactor and/or the thermal release must be replaced, and the
breaker release reset.
Type 2
In the case of short-circuit, the thermal release must not be damaged, while the
welding of the contactor contacts is allowed, as they can easily be separated (with a
screwdriver, for example), without any significant deformation.

ABB SACE XI
 Coordination tables
Switch-disconnectors

Switch-disconnectors

Switch-disconnectors are mechanical switching devices, capable of closing, carrying

and interrupting currents under normal circuit conditions which can include specific
overload switching conditions and which, in the open position, satisfy the isolation
requirements specified for an isolator.
A switch-disconnector can be able to close and carry currents - for an established time
- under specific abnormal circuit conditions, such as those which occur in the case of
a short-circuit.
The Standard regarding switch-disconnectors is IEC 60947-3.
Each switch-disconnector must be protected by a coordinated device which
safeguards it against overcurrents - normally a circuit-breaker, and which is able to
limit the peak values of the short-circuit current and the specific let-through energy, to
acceptable levels for the switch-disconnector.

XII ABB SACE

 TabelleCoordinationcoordinamentotables

IntrodBack-uzionep

Notes for use ............................................................................................................. 1/3

MCB - MCB (240 V) .................................................................................................. 1/4
MCCB - MCB (240 V) ................................................................................................ 1/5
MCB - MCB (415 V) .................................................................................................. 1/6
MCCB - MCB (415 V) ................................................................................................ 1/7
1
MCCB - MCCB ......................................................................................................... 1/8

ABB SACE 1/1

1

1/2 ABB SACE

 Back-up
Notes for use

Back-up protection
The tables given provide the value (in kA, referring to the breaking capacity according
to the IEC 60947-2 Standard) for which the back-up protection among the combination
of selected circuit-breakers is verified. The tables cover the possible combinations
between ABB SACE Tmax and Isomax series of moulded-case circuit-breakers and
those between the above-mentioned circuit-breakers and the ABB series of miniature
circuit-breakers. 1
The values indicated in the tables refer to the voltage:
– Vn of 230/240 V AC for coordination with miniature S9 circuit-breakers
– Vn of 400/415 V AC for all the other coordinations.

Note
The following tables give the breaking capacities at 415 V AC for circuit-breakers
SACE Isomax and Tmax.

Tmax @ 415 V AC Isomax @ 415 V AC

Version Icu [kA] Version Icu [kA]
B 16 S 50
C 25 H 65
N 36 L100
S 50
H 70
L (T2) 85
L (T4, T5) 120
L (T6) 100
V 200

Caption
MCB = miniature circuit-breakers (S9, S2, S500)
MCCB = moulded-case circuit-breakers (Tmax, Isomax)

For moulded-case or air circuit-breakers: For miniature circuit-breakers:

TM = thermomagnetic release B = trip characteristic (Im=3...5In)
– TMD (Tmax) C = trip characteristic (Im=5...10In)
– TMA (Tmax) D = trip characteristic (Im=10...20In)
M = magnetic only release K = trip characteristic (Im=8...14In)
– MF (Tmax) Z = trip characteristic (Im=2...3In)
– MA (Tmax)
EL = electronic release
– PR211/P - PR212/P (Isomax)
– PR221DS - PR222DS (Tmax)

Caption of symbols

MCB Tmax Isomax Emax

For solutions not shown in these tables, please consult the website:
[Link]
or contact ABB SACE

ABB SACE 1/3

 Back-up
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - MCB @ 240 V (Two-pole circuit-breakers)

Supply s. S 200L S200 S200M S200P S 280 S 290 S 500

Char. C B-C B-C B-C B-C B-C C B-C
Load s. Icu [kA] 10 20 25 40 25 20 25 100
In [A] 6..40 0.5..63 0.5..63 0.5..25 32..63 80, 100 80..125 6..63
1 S931 N
S941 N
C
B,C
4,5
6
2..40
2..40
10
10
20
20
25
25
40
40
25
25
15
15
15
15
100
100
S951 N B,C 10 2..40 10 20 25 40 25 15 15 100
S971 N B,C 10 2..40 10 20 25 40 25 15 15 100
S200L C 10 6..40 20 25 40 25 15 15 100
S200 B,C,K,Z 20 0.5..63 25 40 25 100
S200M B,C,D 25 0.5..63 40 100
S200P B, C, 40 0.5..25 100
D,K,Z 25 32..63 100
S280 B,C 20 80, 100
S290 C,D 25 80..125
S500 B,C,D 100 6..63

1/4 ABB SACE

 Back-up
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

MCCB @ 415 V - MCB @ 240 V

Supply s.* T1 T1 T1 T2 T3 T2 T3 T2 T2
Version B C N S H L
Load s. Char. In [A] Icu [kA] 16 25 36 50 70 85
S931 N C 2..25 4,5 16 16 16 20 10 20 10 20 20 1
32, 40 10 10 10 16 16 16 16
S941 N B,C 2..25 6 16 16 16 20 10 20 10 20 20
32, 40 10 10 10 16 16 16 16
S951 N B,C 2..25 10 16 16 16 25 16 25 16 25 25
32, 40 16 16 16 16
S971 N B,C 2..25 10 16 16 16 25 16 25 16 25 25
32, 40 16 16 16 16
* Supply side circuit-breaker 4P (load side circuit branched between one phase and the neutral)

ABB SACE 1/5

 Back-up
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - MCB @ 415 V

Supply s. S 200L S200 S200M S200P S 280 S 290 S 500

Char. C B-C B-C B-C B-C B-C C B-C
Load s. Icu [kA] 6 10 15 25 15 6 15 50
In [A] 6..40 0.5..63 0.5..63 0.5..25 32..63 80, 100 80..125 6..63
1 S200L
S200
C
B,C,K,Z
6
10
6..40
0.5..63
10 15
15
25
25
15
15
15
15
50
50
S200M B,C,D 15 0.5..63 25 50
S200P B, C, 25 0.5..25 50
D,K,Z 15 32..63
S280 B,C 6 80, 100
S290 C,D 15 80..125
S500 B,C,D 50 6..63

1/6 ABB SACE

 Back-up
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

MCCB - MCB @ 415 V

Supply s. T1 T1 T1 T2 T3 T4 T2 T3 T4 T2 T4 T2 T4 T4
Version B C N S H L L V
Load s. Char. In [A] Icu [kA] 16 25 36 50 70 85 120 200
S200L C 6..10 6 16 25 30 36 36 36 36 40 40 40 40 40 40 40 1
13..40 16 16
S200 B,C,K,Z 0.5..10 10 16 25 30 36 36 36 36 40 40 40 40 40 40 40
13..63 16 16
S200M B,C,D 0.5..10 15 16 25 30 36 36 36 50 40 40 70 40 85 40 40
13..63 25 25 60 60
B, C, 0.5..10 25 30 36 36 36 50 40 40 70 40 85 40 40
S200P D,K,Z 13..25 30 36 30 36 50 30 40 60 40 60 40 40
32..63 15 16 25 30 36 25 36 50 25 40 60 40 60 40 40
S280 B,C 80, 100 6 16 16 16 36 16 30 36 16 30 36 30 36 30 30
S290 C,D 80..125 15 16 25 30 36 30 30 50 30 30 70 30 85 30 30
S500 B,C,D 6..63 50 70 70 85 120 200

ABB SACE 1/7

 Back-up
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - MCCB @ 415 V

Supply s. T1 T1 T2 T3 T4 T5 T6 T2 T3 T4 T5 T6 S7 T2 T4 T5 T6 S7 T2 T4 T5 T6 S7 T4 T5
Version C N S H L L L V
Load s. Char. Icu [kA] 25 36 50 70 65 85 120 100 200
T1 B 16 25 36 36 36 30 30 30 50 50 36 36 36 70 40 40 40 85 50 50 50 85 65
1 T1
T1
C 25 36 36 36 36 36 36 50 50 40
50 50 50
40
50
50
50
50 70
50 70
65 65 65
65 65 65
50 85 85 85 70 50 130 100
50 85 100 100 70 50 200 120
T2 50 50 50 50 50 50 70 65 65 65 65 85 100 100 85 85 200 120
T3 N 36 50 50 50 50 50 65 65 65 50 100 100 100 50 200 120
T4 50 50 50 50 65 65 65 50 100 100 65 65 200 120
T5 50 50 50 65 65 50 100 85 65 120
T6 50 40 65 40 70 50
T2 70 70 70 65 85 100 100 85 85 200 130
T3 70 70 70 100 100 100 200 150
T4 S 50 70 70 70 65 100 100 85 85 200 150
T5 70 70 65 100 85 85 150
T6 70 85 85
T2 85 120 120 85 85 200 150
T4 H 70 120 120 100 100 200 180
T5 120 100 100 180
T6 100 85
T2 85 120 120 200 180
T4 L 120 200 200
T5 200

1/8 ABB SACE

 TabelleCoordinationcoordinamentotables

IntroduzioneDiscrimination

Notes for use ............................................................................................................. 2/2

MCB - MCB (240 V) .................................................................................................. 2/4
MCCB - MCB (240 V) ................................................................................................ 2/6
MCB - MCB (415 V)
MCB - S200L ....................................................................................................... 2/8
MCB - S200 ......................................................................................................... 2/9
MCB - S200M .................................................................................................... 2/11
MCB - S200P ..................................................................................................... 2/12
2
MCB - S500 ....................................................................................................... 2/14
MCCB - MCB

T1 - MCB ........................................................................................................... 2/15

T2 - MCB ........................................................................................................... 2/22
T3 - MCB ........................................................................................................... 2/29
T4 - MCB ........................................................................................................... 2/36
MCCB - MCCB
MCCB - T1 ......................................................................................................... 2/44
MCCB - T2 ......................................................................................................... 2/46
MCCB - T3 ......................................................................................................... 2/54
MCCB - T4 ......................................................................................................... 2/54
MCCB - T5 ......................................................................................................... 2/56
MCCB - T6 ......................................................................................................... 2/56
ACB - MCCB ........................................................................................................... 2/57

ABB SACE 2/1

 Discrimination
Notes for use

Selective protection
The tables given provide the value (in kA, referring to the breaking capacity according
to the IEC 60947-2 Standard) for which the selective protection is verified among the
combination of selected circuit-breakers. The tables cover the possible combinations
between ABB SACE Emax series air circuit-breakers, ABB SACE Tmax and Isomax
series of moulded-case circuit-breakers, and the ABB series of miniature circuit-breakers.
The values in the table represent the maximum value obtainable of discrimination
between supply side circuit-breaker and load side circuit-breaker referring to the voltage:
– Vn of 230/240 V AC for the S9 circuit-breakers and Vn of 400/415 V AC for the supply
side circuit-breakers in the coordination between MCB with the miniature S9 circuit-
breakers.
2 – Vn of 400/415 V AC for all the other coordinations.
These values are obtained following particular specifications which, when not respected,
could give discrimination values which are in some cases much lower than what is
indicated. Some of these are generally valid and are given below, others referring
exclusively to particular types of circuit-breakers will be the subject of a note under the
relative table.

General prescriptions
– Function I of the electronic releases of the supply side circuit-breakers must be
excluded (I3 in OFF);
– The magnetic trip of thermomagnetic (TM) or magnetic only (M) circuit-breakers placed
on the supply side must be ∆ 10 x In and regulated to the maximum threshold;
– It is of prime importance to check that the settings made by the user for the
electronic and thermomagnetic relays of circuit-breakers placed both on the load
and supply side results in time-current curves properly spaced.

2/2 ABB SACE

 Discrimination
Notes for use

Note
The letter T indicates total discrimination for the selected combination; the corresponding
value in kA is obtained by considering the lowest between the breaking capacities (Icu) of
the circuit-breaker on the load side and the circuit-breaker on the supply side.
The following tables give the breaking capacities at 415 V AC for SACE Emax,
Isomax and Tmax circuit-breakers.

Tmax @ 415 V AC Isomax @ 415 V AC Emax @ 415 V AC

Version Icu [kA] Version Icu [kA] Version Icu [kA]
B 16 S 50 B 42
C
N
25
36
H
L
65
100
N (E1)
N
50
65
2
S 50 S 75
H 70 S (E2) 85
L (T2) 85 H 100
L (T4, T5) 120 L 130
L (T6) 100 V (E3) 130
V 200 V 150
Caption

MCB = miniature circuit-breakers (S9, S2, S500)

MCCB = moulded-case circuit-breakers (Tmax, Isomax)
ACB = air circuit-breakers (Emax)

For moulded-case or air circuit-breakers: For miniature circuit-breakers:

TM = thermomagnetic release B = trip characteristic (Im=3...5In)
– TMD (Tmax) C = trip characteristic (Im=5...10In)
– TMA (Tmax) D = trip characteristic (Im=10...20In)
M = magnetic only release K = trip characteristic (Im=8...14In)
– MF (Tmax) Z = trip characteristic (Im=2...3In)
– MA (Tmax)
EL = electronic release
– PR121/P - PR122/P - PR123/P (Emax)
– PR211/P - PR212/P (Isomax)
– PR221DS - PR222DS (Tmax)

Caption of symbols

MCB Tmax Isomax Emax

For solutions not shown in these tables, please consult the website:
[Link]
or contact ABB SACE

ABB SACE 2/3

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S9 @ 230/240 V

Supply s.** S290 S500

Char. C D B
Icu [kA] 15 50
Load s.* In [A] 80 100 125 80 100 16 20 25 32 40 50 63
2 T T T T T 0.1 0.15 0.2 0.3 0.4 0.5 0.6
4 T T T T T 0.06 0.15 0.25 0.3 0.4 0.5
6 T T T T T 0.075 0.2 0.25 0.3 0.4
10 4 T T T T 0.15 0.2 0.25 0.3

2 S931N B-C 4.5 16

20
2.5
1.5
3.5
2.5
3.5
2.5
4
3
T
T
0.3
0.3
25 0.5 0.5 1.5 2 4 0.3
32 0.5 0.5 0.5 1.5 3.5
40 0.5 0.5 0.5 1.5 3.5
2 T T T T T 0.1 0.15 0.2 0.3 0.4 0.5 0.6
4 5 T T T T 0.15 0.25 0.3 0.4 0.5
6 4.5 5 T 5.5 T 0.2 0.25 0.3 0.4
10 4 4.5 5 5 5 0.15 0.2 0.25 0.3
S941N B-C 6 16 2.5 3.5 3.5 4 4.5 0.3
20 1.5 2.5 2.5 3 4.5 0.3
25 0.5 0.5 1.5 2 4 0.3
32 0.5 0.5 0.5 1.5 3.5
40 0.5 0.5 0.5 1.5 3.5
2 6 8 9 7 8 0.1 0.15 0.2 0.3 0.4 0.5 0.6
4 5 6 7.5 6 7 0.15 0.25 0.3 0.4 0.5
6 4.5 5 6 5.5 6 0.2 0.25 0.3 0.4
10 4 4.5 5 5 5 0.15 0.2 0.25 0.3
S951N B-C 10 16 2.5 3.5 3.5 4 4.5 0.3
20 1.5 2.5 2.5 3 4.5 0.3
25 0.5 0.5 1.5 2 4 0.3
32 0.5 0.5 0.5 1.5 3.5
40 0.5 0.5 0.5 1.5 3.5
2 6 8 9 7 8 0.1 0.15 0.2 0.3 0.4 0.5 0.6
4 5 6 7.5 6 7 0.15 0.25 0.3 0.4 0.5
6 4.5 5 6 5.5 6 0.2 0.25 0.3 0.4
10 4 4.5 5 5 5 0.15 0.2 0.25 0.3
S971N B-C 10 16 2.5 3.5 3.5 4 4.5 0.3
20 1.5 2.5 2.5 3 4.5 0.3
25 0.5 0.5 1.5 2 4 0.3
32 0.5 0.5 0.5 1.5 3.5
40 0.5 0.5 0.5 1.5 3.5
* Load side circuit-breaker 1P+N (230/240 V)
* For networks with 230/240 V AC ⇒ two-pole circuit-breaker (phase + neutral)
for networks at 400/415 V AC ⇒ four-pole circuit-breaker (load side circuit branched between one phase and the neutral)

2/4 ABB SACE

 S500 S500
C D
50 50
10 13 16 20 25 32 40 50 63 10 13 16 20 25 32 40 50 63
0.1 0.2 0.34 0.53 0.58 0.62 0.7 0.85 1 0.24 0.5 1 2 3 T T T T
0.15 0.26 0.4 0.53 0.58 0.62 0.7 0.85 0.2 0.32 0.5 1 2 3.5 T T T
0.1 0.2 0.26 0.4 0.53 0.58 0.62 0.7 0.15 0.24 0.35 0.5 1 2 4 T T
0.15 0.2 0.34 0.48 0.53 0.58 0.62 0.2 0.32 0.35 0.5 0.5 2 T T
0.15 0.26
0.2
0.4
0.34
0.48
0.4
0.53
0.48
0.58
0.53
0.24 0.3 0.5
0.35
0.5
0.5
1.5
1
3.5
2.5
T
3.5
2
0.26 0.34 0.4 0.48 0.5 0.5 1.5 2
0.26 0.34 0.4 0.48 0.5 1 1.5
0.26 0.34 0.4 0.48 0.5 1
0.1 0.2 0.34 0.53 0.58 0.62 0.7 0.85 1 0.24 0.5 1 2 3 5 T T T
0.15 0.26 0.4 0.53 0.58 0.62 0.7 0.85 0.2 0.32 0.5 1 2 3.5 5 T T
0.1 0.2 0.26 0.4 0.53 0.58 0.62 0.7 0.15 0.24 0.35 0.5 1 2 4 5.5 T
0.15 0.2 0.34 0.48 0.53 0.58 0.62 0.2 0.32 0.35 0.5 0.5 2 4.5 T
0.15 0.26 0.4 0.48 0.53 0.58 0.24 0.3 0.5 0.5 1.5 3.5 5.5
0.2 0.34 0.4 0.48 0.53 0.35 0.5 1 2.5 3.5
0.26 0.34 0.4 0.48 0.5 0.5 1.5 2
0.26 0.34 0.4 0.48 0.5 1 1.5
0.26 0.34 0.4 0.48 0.5 1
0.1 0.2 0.34 0.53 0.58 0.62 0.7 0.85 1 0.24 0.5 1 2 3 5 6 7 9
0.15 0.26 0.4 0.53 0.58 0.62 0.7 0.85 0.2 0.32 0.5 1 2 3.5 5 6 8
0.1 0.2 0.26 0.4 0.53 0.58 0.62 0.7 0.15 0.24 0.35 0.5 1 2 4 5.5 7
0.15 0.2 0.34 0.48 0.53 0.58 0.62 0.2 0.32 0.35 0.5 0.5 2 4.5 6
0.15 0.26 0.4 0.48 0.53 0.58 0.24 0.3 0.5 0.5 1.5 3.5 5.5
0.2 0.34 0.4 0.48 0.53 0.35 0.5 1 2.5 3.5
0.26 0.34 0.4 0.48 0.5 0.5 1.5 2
0.26 0.34 0.4 0.48 0.5 1 1.5
0.26 0.34 0.4 0.48 0.5 1
0.1 0.2 0.34 0.53 0.58 0.62 0.7 0.85 1 0.24 0.5 1 2 3 5 6 7 9
0.15 0.26 0.4 0.53 0.58 0.62 0.7 0.85 0.2 0.32 0.5 1 2 3.5 5 6 8
0.1 0.2 0.26 0.4 0.53 0.58 0.62 0.7 0.15 0.24 0.35 0.5 1 2 4 5.5 7
0.15 0.2 0.34 0.48 0.53 0.58 0.62 0.2 0.32 0.35 0.5 0.5 2 4.5 6
0.15 0.26 0.4 0.48 0.53 0.58 0.24 0.3 0.5 0.5 1.5 3.5 5.5
0.2 0.34 0.4 0.48 0.53 0.35 0.5 1 2.5 3.5
0.26 0.34 0.4 0.48 0.5 0.5 1.5 2
0.26 0.34 0.4 0.48 0.5 1 1.5
0.26 0.34 0.4 0.48 0.5 1

ABB SACE 2/5

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

MCCB @ 415 V 4p - S9 @ 240 V

Supply s. T1
Version B,C,N
Release TMD TMD, MA
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160** 160 16 20 25 32 40 50
C ∆4 T T T T T T T T T T T T T T T T T T
C 6 T T T T T T T T T T T T T T T T T T
C 10 3 3 3 T T T T T T T 3* 3 3 3 T

2 S931N C
C
4.5 16
20
3 T
3
T
T
T
T
T
T
T
T
T
T
T
T
3*
3*
3
3
T

C 25 T T T T T T 3*
C 32 T T T T T 3*
C 40 T T T T
B-C ∆4 T T T T T T T T T T T T T T T T T T
B-C 6 T T T T T T T T T T T T T T T T T T
B-C 10 3 3 3 4.5 T T T T T T 3* 3 3 3 4.5
S941N B-C 6 16 3 4.5 5 T T T T T 3* 3 4.5
B-C 20 3 5 T T T T T 3* 3
B-C 25 5 T T T T T 3*
B-C 32 T T T T T 3*
B-C 40 T T T T
B-C ∆4 T T T T T T T T T T T T T T T T T T
B-C 6 6 6 6 6 6 6 T T T T T T T T T T T T
B-C 10 3 3 3 4.5 7.5 8.5 T T T T 3* 3 3 3 4.5
S951N B-C 10 16 3 4.5 5 7.5 T T T T 3* 3 4.5
B-C 20 3 5 6 T T T T 3* 3
B-C 25 5 6 T T T T 3*
B-C 32 6 7.5 T T T 3*
B-C 40 7.5 T T T
B-C ∆4 T T T T T T T T T T T T T T T T T T
B-C 6 6 6 6 6 6 6 12 T T T T T T T T T T T
B-C 10 3 3 3 4.5 7.5 8.5 T T T T 3* 3 3 3 4.5
S971N B-C 10 16 3 4.5 5 7.5 T T T T 3* 3 4.5
B-C 20 3 5 6 T T T T 3* 3
B-C 25 5 6 T T T T 3*
B-C 32 6 7.5 T T T 3*
B-C 40 7.5 T T T
Supply side circuit-breaker 4P (load side circuit branched between one phase and the neutral)
Load side circuit-breaker 1P+N (230/240 V)
* Value valid only for magnetic only supply side circuit-breaker
* Neutral 50%

2/6 ABB SACE

 T2 T3
N,S,H,L N, S
EL TMD, MA
160 250
63 80 100 125** 125 160** 160 10 25 63 100 160 63 80 100 125** 125 160** 160 200** 200 250** 250
T T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T
T* T T T T T T T* T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
5 T T T T T T T T T 5 T T T T T T T T T T
5 T T T T T T T T T 5 T T T T T T T T T T
5 T T T T T T T T T 5 T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T
T* T T T T T T T* T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
7.5 8.5 T T T T T T T T T 7.5 8.5 T T T T T T T T T
5 7.5 T 7.5 T T T T T T 5 7.5 T 7.5 T T T T T T T
5 6 T 6 T T T T T T 5 6 T 6 T T T T T T T
5 6 T 6 T T T T T T 5 6 T 6 T T T T T T T
6 7.5 6 T T T T T T 6 7.5 6 T T T T T T T
6* 7.5 T T T T T 6* 7.5 T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T T T T T
7.5 8.5 T T T T T T T T T 7.5 8.5 T T T T T T T T T
5 7.5 T 7.5 T T T T T T 5 7.5 T 7.5 T T T T T T T
5 6 T 6 T T T T T T 5 6 T 6 T T T T T T T
5 6 T 6 T T T T T T 5 6 T 6 T T T T T T T
6 7.5 6 T T T T T T 6 7.5 6 T T T T T T T
6* 7.5 T T T T T 6* 7.5 T T T T T T T

ABB SACE 2/7

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200L @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
6..8 T T 1.5 2 3 5.5
10 5 T 1 1.5 2 3
13 4.5 T 1.5 2 3
S200L C 6 16 4.5 T 2 3

2 20
25
3.5
3.5
5
5
2.5

32 4.5
40

2/8 ABB SACE

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200 @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
∆2 T T T T T T
C 3 T T 3 6 T T
4 T T 2 3 6 T
6 T T 1.5 2 3 5.5
8
10
T
5
T
8
1.5
1
2
1.5
3
2
5.5
3
2
10 13 4.5 7 1.5 2 3
16 4.5 7 2 3
B-C 20 3.5 5 2.5
25 3.5 5
32 4.5
40
50
S200 63
∆2 T T T T T T
3 T T 3 6 T T
4 T T 2 3 6 T
6 T T 1.5 2 3 5.5
8 T T 1.5 2 3 5.5
10 5 8 1 1.5 2 3
D 10 13 3 5 1.5 2
16 3 5 1.5 2
20 3 5 2
25 4
32
40
50
63

ABB SACE 2/9

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200 @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
∆2 T T T T T T
3 T T 3 6 T T
4 T T 2 3 6 T
6 T T 1.5 2 3 5.5

2 8
10
T
5
T
8
1.5 2
1.5
3
2
5.5
3
K 10 16 3 5 2
20 3 5
25 4
32
40
50
S200 63
∆2 T T T T T T
3 T T 3 6 T T
4 T T 2 3 6 T
6 T T 1.5 2 3 5.5
8 T T 1.5 2 3 5.5
10 5 8 1 1.5 2 3
Z 10 16 4.5 7 1 1.5 2 3
20 3.5 5 1.5 2 2.5
25 3.5 5 2 2.5
32 3 4.5 2
40 3 4.5
50 3
63

2/10 ABB SACE

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200M @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
∆2 T T T T T T
C 3 T T 3 6 T T
4 T T 2 3 6 T
6 10.5 T 1.5 2 3 5.5
8
10
10.5
5
T
8
1.5
1
2
1.5
3
2
5.5
3
2
15 13 4.5 7 1.5 2 3
16 4.5 7 2 3
B-C 20 3.5 5 2.5
25 3.5 5
32 4.5
40
50
63
∆2 T T T T T T
3 T T 3 6 T T
4 T T 2 3 6 T
6 10.5 T 1.5 2 3 5.5
8 10.5 T 1.5 2 3 5.5
10 5 8 1 1.5 2 3
S200M D 15 16 3 5 1.5 2
20 3 5 2
25 4
32
40
50
63
∆2 T T T T T T
3 T T 3 6 T T
4 T T 2 3 6 T
6 10.5 T 1.5 2 3 5.5
8 10.5 T 1.5 2 3 5.5
10 5 8 1.5 2 3
K 15 16 3 5 2
20 3 5
25 4
32
40
50
63

ABB SACE 2/11

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200P @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
∆2 T T T T T T
C 3 T T 3 6 15 15
4 T T 2 3 6 15
6 10.5 T 1.5 2 3 5.5
2 25 8 10.5 T 1.5 2 3 5.5
10 5 8 1 1.5 2 3
13 4.5 7 1.5 2 3
B-C 16 4.5 7 2 3
20 3.5 5 2.5
25 3.5 5
32 4.5
15 40
50
S200P 63
∆2 T T T T T T
3 T T 3 6 15 15
4 T T 2 3 6 15
6 10.5 T 1.5 2 3 5.5
25 8 10.5 T 1.5 2 3 5.5
10 5 8 1 1.5 2 3
D 13 3 5 1.5 2
16 3 5 1.5 2
20 3 5 2
25 4
32
15 40
50
63

2/12 ABB SACE

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S200P @ 400/415 V

Supply s. S290 S500

Char. D D
Icu [kA] 15 50
Load s. In [A] 80 100 32 40 50 63
∆2 T T T T T T
3 T T 3 6 15 15
4 T T 2 3 6 15
6 10.5 T 1.5 2 3 5.5
25 8 10.5 T 1.5 2 3 5.5 2
10 5 8 1.5 2 3
K 13 3 5 1.5 2
16 3 5 2
20 3 5
25 4
32
15 40
50
S200P 63
∆2 T T T T T T
3 T T 3 6 15 15
4 T T 2 3 6 15
6 10.5 T 1.5 2 3 5.5
25 8 10.5 T 1.5 2 3 5.5
Z 10 5 8 1 1.5 2 3
16 4.5 7 1 1.5 2 3
20 3.5 5 1.5 2 2.5
25 3.5 5 2 2.5
32 3 4.5 2
15 40 3 4.5
50 3
63

ABB SACE 2/13

 Discrimination
Supply side circuit-breaker: MCB
Load side circuit-breaker: MCB

MCB - S500 @ 400/415 V

Supply s. S290
Char. D
Icu [kA] 15
Load s. In [A] 80 100
6 6 10
10 6 10
13 6 10
16 6 10

2 B-C-D 50 20
25
6
4.5
7.5
6
32 6
40
50
S500 63
∆5.8 T T
50 5.3..8 10 T
7.3..11 7.5 T
10..15 4.5 10
K 14..20 4.5 6
18..26 4.5
30 23..32
29..37
34..41
38..45

2/14 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200L @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
6 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T
10 3 3 3 4.5 T T T T T

S200L C 6
13
16
3 3
3
4.5
4.5
T
5
T
T
T
T
T
T
T
T 2
20 3 5 T T T T
25 5 T T T T
32 T T T T
40 T T T

ABB SACE 2/15

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200 @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
∆2 T T T T T T T T T T T
C 3 T T T T T T T T T T T
4 T T T T T T T T T T T

2 6
8
5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
T
T
T
T
T
T
T
T
T
T
10 3 3 3 4.5 7.5 8.5 T T T
10 13 3 3 4.5 7.5 7.5 T T T
16 3 4.5 5 7.5 T T T
B-C 20 3 5 6 T T T
25 5 6 T T T
32 6 7.5 T T
40 7.5 T T
50 7.5 T
S200 63 T
∆2 T T T T T T T T T T T
3 T T T T T T T T T T T
4 T T T T T T T T T T T
6 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T
10 3 3 3 3 5 8.5 T T T
D 10 13 2 2 3 5 8 T T
16 2 2 3 5 8 T T
20 2 3 4.5 6.5 T T
25 2.5 4 6 9.5 T
32 4 6 9.5 T
40 5 8 T
50 5 9.5
63 9.5

2/16 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200 @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
∆2 T T T T T T T T T T T
3 T T T T T T T T T T T
4 T T T T T T T T T T T
6
8
5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
T
T
T
T
T
T
T
T
T
T
2
10 3 3 3 3 6 8.5 T T T
K 10 16 3 3 4.5 7.5 T T T
20 3 3.5 5.5 6.5 T T
25 3.5 5.5 6 9.5 T
32 4.5 6 9.5 T
40 5 8 T
50 6 9.5
S200 63 9.5
∆2 T T T T T T T T T T T
3 T T T T T T T T T T T
4 T T T T T T T T T T T
6 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T
10 3 3 3 4.5 8 8.5 T T T
Z 10 16 3 4.5 5 7.5 T T T
20 3 5 6 T T T
25 5 6 T T T
32 6 7.5 T T
40 7.5 T T
50 7.5 T
63 T

ABB SACE 2/17

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200M @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
∆2 T T T T T T T T T T T
C 3 T T T T T T T T T T T
4 T T T T T T T T T T T

2 6
8
5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
T
T
T
T
T
T
T
T
10 3 3 3 4.5 7.5 8.5 T T T
15 13 3 3 4.5 7.5 7.5 12 T T
16 3 4.5 5 7.5 12 T T
B-C 20 3 5 6 10 T T
25 5 6 10 T T
32 6 7.5 12 T
40 7.5 12 T
50 7.5 10.5
63 10.5
∆2 T T T T T T T T T T T
3 T T T T T T T T T T T
4 T T T T T T T T T T T
6 5.5 5.5 5.5 5.5 5.5 5.5 10.5 T T T T
8 5.5 5.5 5.5 5.5 5.5 10.5 12 T T T
S200M D 15 10 3 3 3 3 5 8.5 T T T
16 2 2 3 5 8 13.5 T
20 2 3 4.5 6.5 11 T
25 2.5 4 6 9.5 T
32 4 6 9.5 T
40 5 8 T
50 5 9.5
63 9.5
∆2 T T T T T T T T T T T
3 T T T T T T T T T T T
4 T T T T T T T T T T T
6 5.5 5.5 5.5 5.5 5.5 5.5 10.5 T T T T
8 5.5 5.5 5.5 5.5 5.5 10.5 12 T T T
10 3 3 3 3 6 8.5 T T T
K 15 16 3 3 4.5 7.5 10 13.5 T
20 3 3.5 5.5 6.5 11 T
25 3.5 5.5 6 9.5 T
32 4.5 6 9.5 T
40 5 8 T
50 6 9.5
63 9.5

2/18 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200P @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
∆2 T T T T T T T T T T T
C 3 15 15 15 15 15 15 15 15 17* T T
4 15 15 15 15 15 15 15 15 17* T T

25
6
8
5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
15
15
17*
17*
T
T
T
T
2
10 3 3 3 4.5 7.5 8.5 17* T T
13 3 3 4.5 7.5 7.5 12 20* T
16 3 4.5 5 7.5 12 20* T
B-C 20 3 5 6 10 15 T
25 5 6 10 15 T
32 6 7.5 12 T
15 40 7.5 12 T
50 7.5 10.5
S200P 63 10.5
∆2 T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 17* T T
4 15 15 15 15 15 15 15 15 17* T T
6 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 17* T T
25 8 5.5 5.5 5.5 5.5 5.5 10.5 12 17* T T
10 3 3 3 3 5 8.5 17* T T
D 13 2 2 3 5 8 13.5 T
16 2 2 3 5 8 13.5 T
20 2 3 4.5 6.5 11 T
25 2.5 4 6 9.5 T
32 4 6 9.5 T
15 40 5 8 T
50 5 9.5
63 9.5

* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

ABB SACE 2/19

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S200P @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
∆2 T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 17* T T
4 15 15 15 15 15 15 15 15 17* T T

2 25
6
8
5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
15
12
17*
17*
T
T
T
T
10 3 3 3 3 6 8.5 17* T T
K 13 3 3 5 7.5 10 13.5 T
16 3 3 4.5 7.5 10 13.5 T
20 3 3.5 5.5 6.5 11 T
25 3.5 5.5 6 9.5 T
32 4.5 6 9.5 T
15 40 5 8 T
50 6 9.5
S200P 63 9.5
∆2 T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 17* T T
4 15 15 15 15 15 15 15 15 17* T T
6 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 17* T T
25 8 5.5 5.5 5.5 5.5 5.5 10.5 12 17* T T
Z 10 3 3 3 4.5 8 8.5 17* T T
16 3 4.5 5 7.5 12 20* T
20 3 5 6 10 15 T
25 5 6 10 15 T
32 6 7.5 12 T
15 40 7.5 12 T
50 7.5 10.5
63 10.5
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/20 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T1 - S500 @ 400/415 V

Supply s. T1
Version B,C,N
Release TM
Iu [A] 160
Load s. Char. Icu [kA] In [A] 16 20 25 32 40 50 63 80 100 125 160
6 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 20* 25* T
10 4.5 4.5 4.5 4.5 8 10 20* 25* T
13 4.5 4.5 4.5 7.5 10 15 25* T

B-C-D 50
16
20
4.5 4.5
4.5
7.5
7.5
10
10
15
15
25*
25*
T
T
2
25 6 10 15 20* T
32 7.5 10 20* T
40 10 20* T
50 15 T
S500 63 T
∆5.8 36 36 T T T T T T T T T
50 5.3..8 5.5 5.5 5.5 5.5 5.5 5.5 10.5 T T T T
7.3..11 4.5 4.5 4.5 4.5 8 T T T T
10..15 4.5 4.5 4.5 7.5 10 15 T T
K 14..20 4.5 4.5 7.5 10 15 T T
18..26 4.5 7.5 10 15 T T
30 23..32 6 10 15 20* T
29..37 7.5 10 20* T
34..41 10 20* T
38..45 15 T
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

ABB SACE 2/21

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200L @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
10 3* 3 3 3 4.5 T T T T T T T T T

2 S200L C 6
13
16
3* 3
3*
3
3
4.5
4.5
T
5
T
T
T
T
T
T
T
T
T T
T
T
T
T
T
20 3* 3 5 T T T T T T T
25 3* 5 T T T T T T T
32 3* T T T T T T T
40 5.5* T T T T T

* Value valid with supply side magnetic only circuit-breaker

2/22 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200 @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
∆2 T T T T T T T T T T T T T T T T T
C 3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
2
8 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
10 3* 3 3 3 4.5 7.5 8.5 T T T T T T T
10 13 3* 3 3 4.5 7.5 7.5 T T T T T T T
16 3* 3 4.5 5 7.5 T T T T T T
B-C 20 3* 3 5 6 T T T T T T
25 3* 5 6 T T T T T T
32 3* 6 7.5 T T T T T
40 5.5* 7.5 T T T T
50 3* 5* 7.5 T T T
S200 63 5* T T
∆2 T T T T T T T T T T T T T T T T T
3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
10 3* 3 3 3 3 5 8.5 T T T T T T T
D 10 13 2* 2 2 3 5 8 T T T T T
16 2* 2 2 3 5 8 T T T T T
20 2* 2 3 4.5 6.5 T T T T T
25 2* 2.5 4 6 9.5 T T T T
32 4 6 9.5 T T T T
40 3* 5 8 T T T
50 2* 3* 5 9.5 9.5 9.5
63 3* 9.5 9.5
* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/23

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200 @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
∆2 T T T T T T T T T T T T T T T T T
3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T

2 6
8
5.5* 5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
10 3* 3 3 3 3 6 8.5 T T T T T T T
K 10 16 2* 3 3 4.5 7.5 T T T T T T
20 2* 3 3.5 5.5 6.5 T T T T T
25 2* 3.5 5.5 6 9.5 T T T T
32 4.5 6 9.5 T T T T
40 3* 5 8 T T T
50 2* 3* 6 9.5 9.5 9.5
S200 63 3* 9.5 9.5
∆2 T T T T T T T T T T T T T T T T T
3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
8 5.5 5.5 5.5 5.5 5.5 T T T T T T T T T
10 3* 3 3 3 4.5 8 8.5 T T T T T T T
Z 10 16 3* 3 4.5 5 7.5 T T T T T T
20 3* 3 5 6 T T T T T T
25 3* 5 6 T T T T T T
32 3* 6 7.5 T T T T T
40 5.5* 7.5 T T T T
50 4* 5* 7.5 T T T
63 5* T T

* Value valid with supply side magnetic only circuit-breaker

2/24 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200M @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
∆2 T T T T T T T T T T T T T T T T T
C 3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6
8
5.5* 5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
10 3* 3 3 3 4.5 7.5 8.5 T T T T T T T
15 13 3* 3 3 4.5 7.5 7.5 12 T T T T T T
16 3* 3 4.5 5 7.5 12 T T T T T
B-C 20 3* 3 5 6 10 T T T T T
25 3* 5 6 10 T T T T T
32 3* 6 7.5 12 T T T T
40 5.5* 7.5 12 T T T
50 3* 5* 7.5 10.5 10.5 10.5
63 5* 10.5 10.5
∆2 T T T T T T T T T T T T T T T T T
3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 10.5 T T T T T T T T
8 5.5 5.5 5.5 5.5 5.5 10.5 12 T T T T T T T
10 3* 3 3 3 3 5 8.5 T T T T T T T
S200M D 15 16 2* 2 2 3 5 8 13.5 T T T T
20 2* 2 3 4.5 6.5 11 T T T T
25 2* 2.5 4 6 9.5 T T T T
32 4 6 9.5 T T T T
40 3* 5 8 T T T
50 2* 3* 5 9.5 9.5 9.5
63 3* 9.5 9.5
∆2 T T T T T T T T T T T T T T T T T
3 T T T T T T T T T T T T T T T T T
4 T T T T T T T T T T T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 10.5 T T T T T T T T
8 5.5 5.5 5.5 5.5 5.5 10.5 12 T T T T T T T
10 3* 3 3 3 3 6 8.5 T T T T T T T
K 15 16 2* 3 3 4.5 7.5 10 13.5 T T T T
20 2* 3 3.5 5.5 6.5 11 T T T T
25 2* 3.5 5.5 6 9.5 T T T T
32 4.5 6 9.5 T T T T
40 3* 5 8 T T T
50 2* 3* 6 9.5 9.5 9.5
63 3* 9.5 9.5

* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/25

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200P @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
∆2 T T T T T T T T T T T T T T T T T
C 3 15 15 15 15 15 15 15 15 15 17 T T T T T T T
4 15 15 15 15 15 15 15 15 15 17 T T T T T T T

2 25
6
8
5.5* 5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
15
15
17
17
T
T
T
T
T
T
T
T
T
T
T
T
10 3* 3 3 3 4.5 7.5 8.5 17 T T T T T T
13 3* 3 3 4.5 7.5 7.5 12 20 T T T T T
16 3* 3 4.5 5 7.5 12 20 T T T T
B-C 20 3* 3 5 6 10 15 T T T T
25 3* 5 6 10 15 T T T T
32 3* 6 7.5 12 T T T T
15 40 5.5* 7.5 12 T T T
50 3* 5* 7.5 10.5 10.5 10.5
S200P 63 5* 10.5 10.5
∆2 T T T T T T T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 15 17 T T T T T T T
4 15 15 15 15 15 15 15 15 15 17 T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 17 T T T T T T
25 8 5.5 5.5 5.5 5.5 5.5 10.5 12 17 T T T T T T
10 3* 3 3 3 3 5 8.5 17 T T T T T T
D 13 2* 2 2 3 5 8 13.5 T T T T
16 2* 2 2 3 5 8 13.5 T T T T
20 2* 2 3 4.5 6.5 11 T T T T
25 2* 2.5 4 6 9.5 T T T T
32 4 6 9.5 T T T T
15 40 3* 5 8 T T T
50 2* 3* 5 9.5 9.5 9.5
63 3* 9.5 9.5
* Value valid with supply side magnetic only circuit-breaker

2/26 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S200P @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
∆2 T T T T T T T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 15 17 T T T T T T T
4 15 15 15 15 15 15 15 15 15 17 T T T T T T T

25
6
8
5.5* 5.5 5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
10.5
10.5
15
12
17
17
T
T
T
T
T
T
T
T
T
T
T
T
2
10 3* 3 3 3 3 6 8.5 17 T T T T T T
K 13 2* 3 3 5 7.5 10 13.5 T T T T T
16 2* 3 3 4.5 7.5 10 13.5 T T T T
20 2* 3 3.5 5.5 6.5 11 T T T T
25 2* 3.5 5.5 6 9.5 T T T T
32 4.5 6 9.5 T T T T
15 40 3* 5 8 T T T
50 2* 3* 6 9.5 9.5 9.5
S200P 63 3* 9.5 9.5
∆2 T T T T T T T T T T T T T T T T T
3 15 15 15 15 15 15 15 15 15 17 T T T T T T T
4 15 15 15 15 15 15 15 15 15 17 T T T T T T T
6 5.5* 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 17 T T T T T T
25 8 5.5 5.5 5.5 5.5 5.5 10.5 15 17 T T T T T T
10 3* 3 3 3 4.5 8 8.5 17 T T T T T T
Z 16 3* 3 4.5 5 7.5 12 20 T T T T
20 3* 3 5 6 10 15 T T T T
25 3* 5 6 10 15 T T T T
32 3* 6 7.5 12 T T T T
15 40 5.5* 7.5 12 T T T
50 4* 5* 7.5 10.5 10.5 10.5
63 5* 10.5 10.5

* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/27

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T2 - S290 @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 160 160
C-D-K 80 4
S290 15 100 4
C 125 4

2
Tmax T2 - S500 @ 400/415 V

Supply s. T2
Version N,S,H,L
Release TM, M EL
Iu [A] 160
Load s. Char. Icu [kA] In [A] 12.5 16 20 25 32 40 50 63 80 100 125 160 10 25 63 100 160
6 4.5 5.5 5.5 5.5 5.5 5.5 5.5 10.5 15 20 25 36 36 36 36 36
10 4.5* 4.5 4.5 4.5 4.5 8 10 20 25 36 36 36 36 36
13 4.5* 4.5 4.5 4.5 7.5 10 15 25 36 36 36 36 36
16 4.5* 4.5 4.5 7.5 10 15 25 36 36 36 36
B-C-D 50 20 4.5* 4.5 7.5 10 15 25 36 36 36 36
25 4.5* 6 10 15 20 36 36 36 36
32 4.5* 7.5 10 20 36 36 36 36
40 5* 10 20 36 36 36
50 5* 7.5* 15 36 36 36
S500 63 5* 36 36
∆5.8 36 36 36 36 36 36 36 36 36 36 36 50** 50** 50** 50** 50** 50**
50 5.3..8 4.5* 5.5 5.5 5.5 5.5 5.5 5.5 10.5 36 36 36 50** 50** 50** 50** 50**
7.3..11 4.5* 4.5 4.5 4.5 4.5 8 36 36 36 50** 50** 50** 50** 50**
10..15 4.5* 4.5 4.5 4.5 7.5 10 15 T T T T T T
K 14..20 4.5* 4.5 4.5 7.5 10 15 T T T T T
18..26 4.5* 4.5 7.5 10 15 T T T T T
30 23..32 4.5* 6 10 15 20 T T T T
29..37 4.5* 7.5 10 20 T T T
34..41 5* 10 20 T T T
38..45 5* 7.5* 15 T T T

* Value valid with supply side magnetic only circuit-breaker

* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/28 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200L@ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
6 T T T T T T T
8 T T T T T T T
10 T T T T T T T

S200L C 6
13
16
T
5
T
T
T
T
T
T
T
T
T
T
T
T
2
20 5 T T T T T T
25 5 T T T T T T
32 T T T T T T
40 4 T T T T T

ABB SACE 2/29

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200 @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
∆2 T T T T T T T
C 3 T T T T T T T
4 T T T T T T T

2 6
8
T
T
T
T
T
T
T
T
T
T
T
T
T
T
10 7.5 8.5 T T T T T
10 13 7.5 7.5 T T T T T
16 5 7.5 T T T T T
B-C 20 5 6 T T T T T
25 5 6 T T T T T
32 6 7.5 T T T T
40 7.5 T T T T
50 5* 7.5 T T T
S200 63 5* 6* T T T
∆2 T T T T T T T
3 T T T T T T T
4 T T T T T T T
6 T T T T T T T
8 T T T T T T T
10 5 8.5 T T T T T
D 10 13 3 5 8 T T T T
16 3 5 8 T T T T
20 3 4.5 6.5 T T T T
25 2.5 4 6 9.5 T T T
32 4 6 9.5 T T T
40 5 8 T T T
50 3* 5 9.5 T T
63 3* 5* 9.5 T T

* Value valid with supply side magnetic only circuit-breaker

2/30 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200 @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
∆2 T T T T T T T
3 T T T T T T T
4 T T T T T T T
6
8
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
10 6 8.5 T T T T T
K 10 16 4.5 7.5 T T T T T
20 3.5 5.5 6.5 T T T T
25 3.5 5.5 6 9.5 T T T
32 4.5 6 9.5 T T T
40 5 8 T T T
50 3* 6 9.5 T T
S200 63 3* 5.5* 9.5 T T
∆2 T T T T T T T
3 T T T T T T T
4 T T T T T T T
6 T T T T T T T
8 T T T T T T T
10 8 8.5 T T T T T
Z 10 16 5 7.5 T T T T T
20 5 6 T T T T T
25 5 6 T T T T T
32 6 7.5 T T T T
40 7.5 T T T T
50 5* 7.5 T T T
63 5* 6* T T T

* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/31

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200M @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
∆2 T T T T T T T
C 3 T T T T T T T
4 T T T T T T T

2 6
8
10.5
10.5
T
T
T
T
T
T
T
T
T
T
T
T
10 7.5 8.5 T T T T T
15 13 7.5 7.5 12 T T T T
16 5 7.5 12 T T T T
B-C 20 5 6 10 T T T T
25 5 6 10 T T T T
32 6 7.5 12 T T T
40 7.5 12 T T T
50 5* 7.5 10.5 T T
63 5* 6* 10.5 T T
∆2 T T T T T T T
3 T T T T T T T
4 T T T T T T T
6 10.5 T T T T T T
8 10.5 12 T T T T T
S200M 10 5 8.5 T T T T T
D 15 16 3 5 8 13.5 T T T
20 3 4.5 6.5 11 T T T
25 2.5 4 6 9.5 T T T
32 4 6 9.5 T T T
40 5 8 T T T
50 3* 5 9.5 T T
63 3* 5* 9.5 T T
∆2 T T T T T T T
3 T T T T T T T
4 T T T T T T T
6 10.5 T T T T T T
8 10.5 12 T T T T T
10 6 8.5 T T T T T
K 15 16 4.5 7.5 10 13.5 T T T
20 3.5 5.5 6.5 11 T T T
25 3.5 5.5 6 9.5 T T T
32 4.5 6 9.5 T T T
40 5 8 T T T
50 3* 6 9.5 T T
63 3* 5.5* 9.5 T T
* Value valid with supply side magnetic only circuit-breaker

2/32 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200P @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
∆2 T T T T T T T
C 3 15 15 17 T T T T
4 15 15 17 T T T T

25
6
8
10.5
10.5
15
15
17
17
T
T
T
T
T
T
T
T
2
10 7.5 8.5 17 T T T T
13 7.5 7.5 12 20 T T T
B-C 16 5 7.5 12 20 T T T
20 5 6 10 15 T T T
25 5 6 10 15 T T T
32 6 7.5 12 T T T
15 40 7.5 12 T T T
50 5* 7.5 10.5 T T
S200P 63 5* 6* 10.5 T T
∆2 T T T T T T T
3 15 15 T T T T T
4 15 15 T T T T T
6 10.5 15 T T T T T
25 8 10.5 12 T T T T T
10 5 8.5 T T T T T
D 13 3 5 8 13.5 T T T
16 3 5 8 13.5 T T T
20 3 4.5 6.5 11 T T T
25 2.5 4 6 9.5 T T T
32 4 6 9.5 T T T
15 40 5 8 T T T
50 3* 5 9.5 T T
63 3* 5* 9.5 T T
* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/33

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S200P @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
∆2 T T T T T T T
3 15 15 17 T T T T
4 15 15 17 T T T T

2 25
6
8
10.5
10.5
15
12
17
17
T
T
T
T
T
T
T
T
10 6 8.5 17 T T T T
K 13 5 7.5 10 13.5 T T T
16 4.5 7.5 10 13.5 T T T
20 3.5 5.5 6.5 11 T T T
25 3.5 5.5 6 9.5 T T T
32 4.5 6 9.5 T T T
15 40 5 8 T T T
50 3* 6 9.5 T T
S200P 63 3* 5.5* 9.5 T T
∆2 T T T T T T T
3 15 15 17 T T T T
4 15 15 17 T T T T
6 10.5 15 17 T T T T
25 8 10.5 15 17 T T T T
10 8 8.5 17 T T T T
Z 16 5 7.5 12 20 T T T
20 5 6 10 15 T T T
25 5 6 10 15 T T T
32 6 7.5 12 T T T
15 40 7.5 12 T T T
50 5* 7.5 10.5 T T
63 5* 6* 10.5 T T
* Value valid with supply side magnetic only circuit-breaker

2/34 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T3 - S290 @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 160 200 250
C-D-K 80 4* 10 15
S290 15 100 4* 7.5* 15
C 125 7.5*
* Value valid with supply side magnetic only circuit-breaker 2

Tmax T3 - S500 @ 400/415 V

Supply s. T3
Version N, S
Release TM, M
Iu [A] 250
Load s. Char. Icu [kA] In [A] 63 80 100 125 160 200 250
6 10.5 15 20 25 36 36 36
10 8 10 20 25 36 36 36
13 7.5 10 15 25 36 36 36
16 7.5 10 15 25 36 36 36
B-C-D 50 20 7.5 10 15 25 36 36 36
25 6 10 15 20 36 36 36
32 7.5 10 20 36 36 36
40 10 20 36 36 36
50 7.5* 15 36 36 36
S500 63 5* 6* 36 36 36
∆5.8 36 36 36 36 T T T
50 5.3..8 10.5 36 36 36 T T T
7.3..11 8 36 36 36 T T T
10..15 7.5 10 15 T T T T
K 14..20 7.5 10 15 T T T T
18..26 7.5 10 15 T T T T
30 23..32 6 10 15 20 T T T
29..37 7.5 10 20 T T T
34..41 10 20 T T T
38..45 7.5* 15 T T T
* Value valid with supply side magnetic only circuit-breaker

ABB SACE 2/35

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200L @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
6 T T* T T T T T T T T T T T T
8 T T* T T T T T T T T T T T T
10 5 5* 5 T T T T T T T T T T T

2 S200L C 6
13
16
5*
3*
5
5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
20 5 T T T T T T T T T T
25 5 T T T T T T T T T T
32 5** T T T T T T T T T T
40 T T T T T T T T T T
* Value valid with supply side magnetic only circuit-breaker
* Value valid with supply side magnetic only MA 52 circuit-breaker

2/36 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200 @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
∆2 T T* T T T T T T T T T T T T
C 3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6
8
7.5
7.5
7.5*
7.5*
7.5
7.5
7.5
7.5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
10 5 5* 5 6.5 9 T T T T T T T T T
10 13 5* 5 6.5 8 T T T T T T T T T
16 3* 5 6.5 8 T T T T T T T T T
B-C 20 5 7.5 T T T T T T T T T
25 5 7.5 T T T T T T T T T
32 5** 7.5 T T T T T T T T T
40 6.5 T T T T T T T T T
50 5* T T T T T T T T T
S200 63 T* T* T T T T T T T
∆2 T T* T T T T T T T T T T T T
3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6 7.5 7.5* 7.5 7.5 T T T T T T T T T T
8 7.5 7.5* 7.5 7.5 T T T T T T T T T T
10 5 5* 5 5 9 T T T T T T T T T
D 10 13 5* 4 5.5 T T T T T T T T T
16 4 5.5 T T T T T T T T T
20 4** 5 T T T T T T T T T
25 4** 4.5 T T T T T T T T T
32 4.5* T T T T T T T T T
40 4.5* T* T T T T T T T T
50 T* T* T T T T T T T
63 T* T* T T T T T T

*Value valid with supply side magnetic only circuit-breaker

* Value valid with supply side magnetic only MA 52 circuit-breaker

ABB SACE 2/37

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200 @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
∆2 T T* T T T T T T T T T T T T
3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T

2 6
8
7.5
7.5
7.5*
7.5*
7.5
7.5
7.5
7.5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
10 5* 5 5 9 T T T T T T T T T
K 10 16 5* 5 8 T T T T T T T T T
20 5 6 T T T T T T T T T
25 5** 6* T T T T T T T T T
32 5** 6* T* T T T T T T T T
40 5.5* T* T* T T T T T T T
50 5* T* T* T* T T T T T T
S200 63 T* T* T* T* T T T T T
∆2 T T* T T T T T T T T T T T T
3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6 7.5 7.5* 7.5 7.5 T T T T T T T T T T
8 7.5 7.5* 7.5 7.5 T T T T T T T T T T
10 5 5* 5 6.5 9 T T T T T T T T T
Z 10 16 5* 4.5 6.5 8 T T T T T T T T T
20 5 7.5 T T T T T T T T T
25 5 7.5 T T T T T T T T T
32 5** 7.5 T T T T T T T T T
40 6.5 T T T T T T T T T
50 5* T T T T T T T T T
63 T* T T T T T T T T
* Value valid with supply side magnetic only circuit-breaker
* Value valid with supply side magnetic only MA 52 circuit-breaker

2/38 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200M @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
∆2 T T* T T T T T T T T T T T T
C 3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6
8
7.5
7.5
7.5*
7.5*
7.5
7.5
7.5
7.5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
10 5 5* 5 6.5 9 T T T T T T T T T
15 13 5* 5 6.5 8 T T T T T T T T T
16 3* 5 6.5 8 T T T T T T T T T
B-C 20 5 7.5 T T T T T T T T T
25 5 7.5 T T T T T T T T T
32 5** 7.5 T T T T T T T T T
40 6.5 T T T T T T T T T
50 5* T T T T T T T T T
63 T* T* T T T T T T T
∆2 T T* T T T T T T T T T T T T
3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6 7.5 7.5* 7.5 7.5 T T T T T T T T T T
8 7.5 7.5* 7.5 7.5 T T T T T T T T T T
S200M 10 5 5* 5 5 9 T T T T T T T T T
D 15 16 4 5.5 T T T T T T T T T
20 4** 5 T T T T T T T T T
25 4** 4.5 T T T T T T T T T
32 4.5* T T T T T T T T T
40 4.5* T* T T T T T T T T
50 T* T* T T T T T T T
63 T* T* T T T T T T
∆2 T T* T T T T T T T T T T T T
3 T T* T T T T T T T T T T T T
4 T T* T T T T T T T T T T T T
6 7.5 7.5* 7.5 7.5 T T T T T T T T T T
8 7.5 7.5* 7.5 7.5 T T T T T T T T T T
10 5* 5 5 9 T T T T T T T T T
K 15 16 5* 5 8 T T T T T T T T T
20 5 6 T T T T T T T T T
25 5** 6* T T T T T T T T T
32 5** 6* T* T T T T T T T T
40 5.5* T* T* T T T T T T T
50 5* T* T* T* T T T T T T
63 T* T* T* T* T T T T T
*Value valid with supply side magnetic only circuit-breaker
* Value valid with supply side magnetic only MA 52 circuit-breaker

ABB SACE 2/39

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200P @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
∆2 T T* T T T T T T T T T T T T
C 3 15 15* 15 15 15 T T T T T T T T T
4 15 15* 15 15 15 T T T T T T T T T

2 25
6
8
7.5
7.5
7.5*
7.5*
7.5
7.5
7.5
7.5
15
15
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
10 5 5* 5 6.5 9 T T T T T T T T T
13 5* 5 6.5 8 T T T T T T T T T
16 3* 5 6.5 8 T T T T T T T T T
B-C 20 5 7.5 T T T T T T T T T
25 5 7.5 T T T T T T T T T
32 5** 7.5 T T T T T T T T T
15 40 6.5 T T T T T T T T T
50 5* T T T T T T T T T
S200P 63 T* T* T T T T T T T
∆2 T T* T T T T T T T T T T T T
3 15 15* 15 15 15 T T T T T T T T T
4 15 15* 15 15 15 T T T T T T T T T
6 7.5 7.5* 7.5 7.5 15 T T T T T T T T T
25 8 7.5 7.5* 7.5 7.5 15 T T T T T T T T T
10 5 5* 5 5 9 T T T T T T T T T
D 13 5* 4 5.5 T T T T T T T T T
16 4 5.5 T T T T T T T T T
20 4** 5 T T T T T T T T T
25 4** 4.5 T T T T T T T T T
32 4.5* T T T T T T T T T
15 40 4.5* T* T T T T T T T T
50 T* T* T T T T T T T
63 T* T* T T T T T T
* Value valid with supply side magnetic only circuit-breaker
* Value valid with supply side magnetic only MA 52 circuit-breaker

2/40 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S200P @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
∆2 T T* T T T T T T T T T T T T
3 15 15* 15 15 15 T T T T T T T T T
4 15 15* 15 15 15 T T T T T T T T T

25
6
8
7.5
7.5
7.5*
7.5*
7.5
7.5
7.5
7.5
15
15
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
10 5* 5 5 9 T T T T T T T T T
K 13 5* 5 5 8 T T T T T T T T T
16 5* 5 8 T T T T T T T T T
20 5 6 T T T T T T T T T
25 5** 6* T T T T T T T T T
32 5** 6* T* T T T T T T T T
15 40 5.5* T* T* T T T T T T T
50 5* T* T* T* T T T T T T
S200P 63 T* T* T* T* T T T T T
∆2 T T* T T T T T T T T T T T T
3 15 15* 15 15 15 T T T T T T T T T
4 15 15* 15 15 15 T T T T T T T T T
6 7.5 7.5* 7.5 7.5 15 T T T T T T T T T
25 8 7.5 7.5* 7.5 7.5 15 T T T T T T T T T
Z 10 5 5* 5 6.5 9 T T T T T T T T T
16 5* 4.5 6.5 8 T T T T T T T T T
20 5 7.5 T T T T T T T T T
25 5 7.5 T T T T T T T T T
32 5** 7.5 T T T T T T T T T
15 40 6.5 T T T T T T T T T
50 5* T T T T T T T T T
63 T* T T T T T T T T
*Value valid with supply side magnetic only circuit-breaker
* Value valid with supply side magnetic only MA 52 circuit-breaker

ABB SACE 2/41

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S290 @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 160 200 250 160 250 320
C-K 80 5 11 T T T T
100 5* 8 T 12 T T
S290 C 15 125 8* 12 T T

2 D 80
100
5 11
8
T
T
T
12
T
T
T
T
* Value valid with supply side magnetic only circuit-breaker

2/42 ABB SACE

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCB

Tmax T4 - S500 @ 400/415 V

Supply s. T4
Version N,S,H,L,V
Release TM, M EL
Iu [A] 250 250 320
Load s. Char. Icu [kA] In [A] 20 25 32 50 80 100 125 160 200 250 100 160 250 320
6 7.5 7.5* 7.5 7.5 16 T T T T T T T T T
10 6.5 6.5* 6.5 6.5 11 T T T T T T T T T
13 6.5 5* 6.5 6.5 11 T T T T T T T T T

B-C 50
16
20
5*
4*
6.5
6.5
6.5
6.5
11
11
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
2
25 6.5 11 T T T T T T T T T
32 6.5 8 T T T T T T T T T
40 5* 6.5 T T T T T T T T T
50 5* 7.5 T T T T T T T T
63 5* 7 T T T T T T T
6 7.5 7.5* 7.5 7.5 16 T T T T T T T T T
10 6.5 6.5* 6.5 6.5 11 T T T T T T T T T
13 5* 6.5 11 T T T T T T T T T
16 6.5 11 T T T T T T T T T
S500 D 50 20 6.5* 11 T T T T T T T T T
25 6.5* 11 T T T T T T T T T
32 8* T T T T T T T T T
40 6.5* T* T T T T T T T T
50 7.5* T* T T T T T T T
63 7* T* T T T T T T
∆5.8 40** 40*/** 40** 40** 40** T T T T T T T T T
50 5.3..8 6 6* 6 6 40** T T T T T T T T T
7.3..11 5* 5 5 40** T T T T T T T T T
10..15 5* 5 12 T T T T T T T T T
K 14..20 5 12 T T T T T T T T T
18..26 5* 12* T T T T T T T T T
30 23..32 5* 12* T* T T T T T T T T
29..37 5* 8* T* T* T T T T T T T
34..41 6* T* T* T T T T T T T
38..45 6* 8* T* T* T T T T T T
*Value valid with supply side magnetic only circuit-breaker (with In = 50 A please refer to MA52 circuit-breakers)
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

ABB SACE 2/43

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T1 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
16 3 3 3 3 3 3 4 5 10** 10 10 10 10 10 10

2 20
25
3
3
3
3
3
3
3
3
3
3
3
3
4
4
5
5
10** 10
10** 10
10
10
10
10
10
10
10
10
10
10
32 3 3 3 3 3 4 5 10* 10 10 10 10 10
40 3 3 3 3 3 4 5 10* 10 10 10 10 10
B 50 3 3 3 3 3 4 5 10* 10 10 10 10
63 3 3 3 3 4 5 10* 10 10 10
80 3 4 5 10 10 10
100 5 10* 10 10
125 10* 10
160
25 3 3 3 3 3 3 4 5 10** 10 10 10 10 10 10
32 3 3 3 3 3 4 5 10* 10 10 10 10 10
T1 TM 160 40 3 3 3 3 3 4 5 10* 10 10 10 10 10
50 3 3 3 3 3 4 5 10* 10 10 10 10
C 63 3 3 3 3 4 5 10* 10 10 10
80 3 4 5 10 10 10
100 5 10* 10 10
125 10* 10
160
32 3 3 3 3 3 4 5 10* 10 10 10 10 10
40 3 3 3 3 3 4 5 10* 10 10 10 10 10
50 3 3 3 3 3 4 5 10* 10 10 10 10
N 63 3 3 3 3 4 5 10* 10 10 10
80 3 4 5 10 10 10
100 5 10* 10 10
125 10* 10
160

* Value valid with supply side magnetic only circuit-breaker

* Value valid with supply side magnetic only MA 52 circuit-breaker

2/44 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 800 1000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 800 100010001250 1600
10 10 10 10 T T T T T T T T T T T T T T
10
10
10
10
10
10
10
10
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T
10 10 T T T T T T T T T T T T T T

ABB SACE 2/45

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T2 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
1.6-2.5 T T T T T T T T T T T* T T T T T T T T

2 3.2
4-5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T*
T*
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
6.3 10 10 10 10 10 10 10 15 40** T T* T T T T T T T T
8 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
10 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
12.5 3 3 3 3 3 3 4 5 T T T T T T T T
16 3 3 3 3 3 3 4 5 T T T T T T
TM 160 20 3 3 3 3 3 3 4 5 T* T T T T T
25 3 3 3 3 3 3 4 5 T* T T T T T
32 3 3 3 3 3 4 5 T* T T T T T
T2 N 40 3 3 3 3 3 4 5 30* 30* 30 30 30 30
50 3 3 3 3 3 4 5 30* 30* 30 30 30 30
63 3 3 3 3 4 5 30* 30* 30* 30 30 30
80 3 3* 4 5 25* 25* 25* 25 25
100 4* 5 25* 25* 25* 25
125 25* 25*
160 25*
10 3 4 25 25 25 25 25 25 25
25 3 4 25 25 25 25 25 25
EL 160 63 3 4 25 25 25
100 3 4 25
160 3 4
* Value valid with supply side magnetic only circuit-breaker
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/46 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 800 1000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 800 10001000 1250 1600
T T T T T T T T T T T T T T T T T T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T

ABB SACE 2/47

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T2 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
1.6-2.5 T T T T T T T T T T T* T T T T T T T T

2 3.2
4-5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T*
T*
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
6.3 10 10 10 10 10 10 10 15 40** T T* T T T T T T T T
8 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
10 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
12.5 3 3 3 3 3 3 4 5 T T T T T T T T
16 3 3 3 3 3 3 4 5 T T T T T T
TM 160 20 3 3 3 3 3 3 4 5 T* T T T T T
25 3 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
32 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
T2 S 40 3 3 3 3 3 4 5 30* 30* 30 30 30 30
50 3 3 3 3 3 4 5 30* 30* 30 30 30 30
63 3 3 3 3 4 5 30* 30* 30* 30 30 30
80 3 3* 4 5 25* 25* 25* 25 25
100 4 5 25* 25* 25* 25
125 25* 25*
160 25*
10 3 4 25 25 25 25 25 25 25
25 3 4 25 25 25 25 25 25
EL 160 63 3 4 25 25 25
100 3 4 25
160 3 4
* Value valid with supply side magnetic only circuit-breaker
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/48 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 800 1000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 800 1000 10001250 1600
T T T T T T T T T T T T T T T T T T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T

ABB SACE 2/49

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T2 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
1.6-2.5 T T T T T T T T T T T* T T T T T T T T

2 3.2
4-5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T*
T*
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
6.3 10 10 10 10 10 10 10 15 40** T T* T T T T T T T T
8 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
10 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
12.5 3 3 3 3 3 3 4 5 T T T T T T T T
16 3 3 3 3 3 3 4 5 T T T T T T
TM 160 20 3 3 3 3 3 3 4 5 55*/** 55** 55** 55** 55** 55**
25 3 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
32 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
T2 H 40 3 3 3 3 3 4 5 30* 30* 30 30 30 30
50 3 3 3 3 3 4 5 30* 30* 30 30 30 30
63 3 3 3 3 4 5 30* 30* 30* 30 30 30
80 3 3* 4 5 25* 25* 25* 25 25
100 4 5 25* 25* 25* 25
125 25* 25*
160 25*
10 3 4 25 25 25 25 25 25 25
25 3 4 25 25 25 25 25 25
EL 160 63 3 4 25 25 25
100 3 4 25
160 3 4
* Value valid with supply side magnetic only circuit-breaker
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/50 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 800 1000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 800 1000 10001250 1600
T T T T T T T T T T T T T T T T T T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
55** 55** 55** 55** T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T

ABB SACE 2/51

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T2 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
1.6-2.5 T T T T T T T T T T T* T T T T T T T T

2 3.2
4-5
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T*
T*
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
6.3 10 10 10 10 10 10 10 15 40** T T* T T T T T T T T
8 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
10 10 10 10 10 10 10 10 15 40** T* T T T T T T T T
12.5 3 3 3 3 3 3 4 5 T T T T T T T T
16 3 3 3 3 3 3 4 5 70** 70** 70** 70** 70** 70**
TM 160 20 3 3 3 3 3 3 4 5 55*/** 55** 55** 55** 55** 55**
25 3 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
32 3 3 3 3 3 4 5 40*/** 40** 40** 40** 40** 40**
T2 L 40 3 3 3 3 3 4 5 30* 30* 30 30 30 30
50 3 3 3 3 3 4 5 30* 30* 30 30 30 30
63 3 3 3 3 4 5 30* 30* 30* 30 30 30
80 3 3* 4 5 25* 25* 25* 25 25
100 4 5 25* 25* 25* 25
125 25* 25*
160 25*
10 3 4 25 25 25 25 25 25 25
25 3 4 25 25 25 25 25 25
EL 160 63 3 4 25 25 25
100 3 4 25
160 3 4

* Value valid with supply side magnetic only circuit-breaker

* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

2/52 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 800 1000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 800 1000 100012501600
T T T T T T T T T T T T T T T T T T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
T T T T T T T T T T T T T T T T T T
70** 70** 70** 70** T T T T T T T T T T T T T T
55** 55** 55** 55** T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
40** 40** 40** 40** T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
30 30 30 30 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 25 T T T T T T T T T T T T T T
25 25 25 T T T T T T T T T T T T T T
25 25 T T T T T T T T T T T T T T

ABB SACE 2/53

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T3 @ 400/415 V

Supply s. T1 T2 T3 T4
Version B,
C, N,S,H,L N,S N,S,H,L,V
N
Release TM TM,M EL TM,M TM,M
Iu [A] 160 160 250 250
Load s. In [A] 160 160 25 63 100 160 160 200 250 20 25 32 50 80 100 125 160 200 250
63 3 4 5 7* 7 7 7

2 80
100
3* 4
4*
5
5
7*
7*
7
7*
7
7
N 125 7*
160
200
T3 TM 250 250
63 3 4 5 7* 7 7 7
80 3* 4 5 7* 7 7
100 4* 5 7* 7* 7
S 125 7*
160
200
250
* Value valid with supply side magnetic only circuit-breaker
* Select the lowest value between what is indicated and the breaking capacity of the supply side circuit-breaker

MCCB - Tmax T4 @ 400/415 V

Supply s. T5 T6 S7
Version
N,S,H,L,V N,S,H,L S,H,L

Release TM EL TM,M EL EL
Iu [A] 400 630 400 630 630 800 630 800 1000 1250 1600
1000100012501600
Load s. In [A] 320 400 500 320 400 630 630 800 630 800
20 T T T T T T T T T T T T T T
32 T T T T T T T T T T T T T T
50 T T T T T T T T T T T T T T
80 T T T T T T T T T T T T T T
N, TM 250 100 50* 50* 50* 50* 50* T T T T T T T T
S, 125 50* 50* 50* 50* T T T T T T T T
T4 H, 160 50* 50* 50* T T T T T T T T
L, 200 50* 50* 50* T T T T T T T T
V 250 50* 50* T T T T T T T T
100 50* 50* 50* 50* 50* 50* T T T T T T T T
EL 250 160 50* 50* 50* 50* 50* 50* T T T T T T T T
250 50* 50* 50* T T T T T T T T
320 320 50* T T T T T T T T
* Select the lowest value among what is indicated, the breaking capacity of the supply side
circuit-breaker and the breaking capacity of the load side circuit-breaker

2/54 ABB SACE

 T4 T5 T6 S7
N,S,H,L,V N,S,H,L,V N,S,H,L S,H,L

EL TM EL TM,M EL EL
250 320 400 630 400 630 630 800 630 8001000 1250 1600
100 160 250 320 320 400 500 320 400 630 630 800 630 8001000 100012501600
7 7 7 7 25 25 25 25 25 25 T T T T T T T T
7
7
7
7
7
7
25
25
25
25
25
25
25
25
25
25
25
25
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T 2
7 7 20 20 20 20 20 20 T T T T T T T T
7 7 20 20 20 20 T T T T T T T T
7 20 20 20 30 T 30 T T T T T
20 20 30 T 30 T T T T T
7 7 7 7 25 25 25 25 25 25 T T T T T T T T
7 7 7 25 25 25 25 25 25 T T T T T T T T
7 7 7 25 25 25 25 25 25 40** T 40** T T T T T
7 7 20 20 20 20 20 20 36 T 36 T T T T T
7 7 20 20 20 20 36 T 36 T T T T T
7 20 20 20 30 T 30 T T T T T
20 20 30 40** 30 40** 40** T T T

ABB SACE 2/55

 Discrimination
Supply side circuit-breaker: MCCB
Load side circuit-breaker: MCCB

MCCB - Tmax T5 @ 400/415 V

Supply s. T6 S7
Version
N,S,H,L S,H,L

Release TM,M EL EL
Iu [A] 630 800 630 8001000 1250 1600
Load s. In [A] 630 800 630 800 100010001250 1600
400 320 30 30 30 30 30 T T T

2 T5
N,
S,
H,
TM
630
400
500
30 30
30
30 T
30 T
T
T
T
T
L, 400 320 30 30 30 30 30 T T T
V EL 400 30 30 30 30 30 T T T
630 630 30 T T T

MCCB - Tmax T6 @ 400/415 V

Supply s. S7
Version
S,H,L

Release EL
Iu [A] 1250 1600
Load s. In [A] 10001250 1600
TM 630 630 T T
800 800 T T
N 630 630 T T T
EL 800 800 T T T
1000 1000 T T
TM 630 630 40 40
800 800 40 40
S 630 630 40 40 40
EL 800 800 40 40 40
T6 1000 1000 40 40
TM 630 630 40 40
800 800 40 40
H 630 630 40 40 40
EL 800 800 40 40 40
1000 1000 40 40
TM 630 630 40 40
800 800 40 40
L 630 630 40 40 40
EL 800 800 40 40 40
1000 1000 40 40

2/56 ABB SACE

 Discrimination
Supply side circuit-breaker: ACB
Load side circuit-breaker: MCCB

ACB - MCCB @ 400/415 V

Supply s. E1 E2 E3 E4 E6
Version B N B N S L* N S H V L* S H V H V
Release EL EL EL EL EL
Load s. Iu[A] 800 800 1600 1000 800 1250 2500 1000 800 800 2000 4000 3200 3200 4000 3200
1000 1000 2000 1250 1000 1600 3200 1250 1000 1000 2500 4000 4000 5000 4000
1250 1250 1600 1250 1600 1250 1250 6300 5000
1600 1600 2000 1600 2000 1600 1600 6300
2000 2500 2000 2000
3200 2500 2500

B T T T T T T T T
3200
T
3200
T T T T T T T 2
T1 C TM 160 T T T T T T T T T T T T T T T T
N T T T T T T T T T T T T T T T T
N T T T T T T T T T T T T T T T T
T2 S TM,EL 160 T T T T T T T T T T T T T T T T
H T T T 55 65 T T T T T T T T T T T
L T T T 55 65 T T T 75 T T T T T T T
T3 N TM 250 T T T T T T T T T T T T T T T T
S T T T T T T T T T T T T T T T T
N T T T T T T T T T T T T T T T T
S 250 T T T T T T T T T T T T T T T T
T4 H TM,EL 320 T T T 55 65 T T T T T T T T T T T
L T T T 55 65 100 T T 75 85 100 T T 100 T 100
V T T T 55 65 100 T T 75 85 100 T T 100 T 100
N T T T T T T T T T T T T T T T T
S 400 T T T T T T T T T T T T T T T T
T5 H TM,EL 630 T T T 55 65 T T T T T T T T T T T
L T T T 55 65 100 T T 75 85 100 T T 100 T 100
V T T T 55 65 100 T T 75 85 100 T T 100 T 100
N 630 T T T T T T T T T T T T T T T T
T6 S TM,EL T T T T T T T T T T T T T T T T
800
H T T T 55 65 T T T T T T T T T T T
1000
L T T T 55 65 T T T 75 85 T T T T T T
S 1250 T T T T T T T T T T T T T T T T
S7 H EL 1600 T T T 55 T T T T T T T T T T T T
L T T T 55 65 T T T 75 85 T T T T T T

Table valid for Emax circuit-breakers only with PR121/P, PR122/P and PR123/P releases
* Emax L circuit-breakers only with PR122/P and PR123/P releases

ABB SACE 2/57

 TabelleCoordinationcoordinamentotables

IntroduziMotorpronetection

Notes for use ............................................................................................................. 3/2

DOL Type 2 - Normal starting
415 V - 35 kA ....................................................................................................... 3/4
415 V - 50 kA ....................................................................................................... 3/5
415 V - 70 kA ....................................................................................................... 3/6
415 V - 80 kA ....................................................................................................... 3/7
440 V - 50 kA ....................................................................................................... 3/8
440 V - 65 kA ....................................................................................................... 3/9
500 V - 50 kA ..................................................................................................... 3/10
690 V - 50 kA ..................................................................................................... 3/11
DOL Type 2 - Heavy duty 3
415 V - 35 kA ..................................................................................................... 3/12
415 V - 50 kA ..................................................................................................... 3/13

440 V - 50 kA ..................................................................................................... 3/14

440 V - 65 kA ..................................................................................................... 3/15
500 V - 50 kA ..................................................................................................... 3/16
690 V - 50 kA ..................................................................................................... 3/17
Star-delta - Type 2
415 V - 35 kA ..................................................................................................... 3/18
415 V - 50 kA ..................................................................................................... 3/18
440 V - 50 kA ..................................................................................................... 3/19
440 V - 65 kA ..................................................................................................... 3/19
500 V - 50 kA ..................................................................................................... 3/20
690 V - 50 kA ..................................................................................................... 3/20
DOL Type 2 - Start-up with MP release
415 V - 35 kA ..................................................................................................... 3/21
415 V - 50 kA ..................................................................................................... 3/21
440 V - 50 kA ..................................................................................................... 3/22
500 V - 50 kA ..................................................................................................... 3/22
690 V - 50 kA ..................................................................................................... 3/23

ABB SACE 3/1

 Motor protection
Notes for use

ABB SACE proposes a vast range of coordination solutions for the power supply of
any motor for which protection against short-circuit and overload are of fundamental
importance.

Standard used
–IEC60947-4–1

Rated power of the motor

– The tables are based on the current consumed by electric, three-phase squirrel cage
ABB induction motors with four poles.
– The rated power of the motor is expressed in kiloWatt
Protection device

As protection device, the following tables use the moulded-case circuit-breakers (MCCB)
3 with the following types of releases:
– MF fixed magnetic only release (for Tmax T2 circuit-breakers)
– MA magnetic only release adjustable (for Tmax T2e T3 circuit-breakers)
– PR221/I electronic release (for Tmax T4 and T5 circuit-breakers)
– PR222MP electronic release (for Tmax T4 and T5 circuit-breakers).
The solutions proposed refer to an ambient temperature of 40 °C and to fixed version
apparatus. For higher temperatures, please contact ABB SACE.

Type of starting
– By normal starting, a starting time up to 2 s is intended in accordance with the trip
time of the thermal relays in class 10 A (see table 2).
– By heavy duty, a starting time up to 9 s is intended in accordance with the trip time
of the thermal relays in class 30 (see table 2).
– Two factors must be considered for normal star-delta starting: the speed the motor
has reached at the end of the starting period is 85% higher than the rated one; the
transition time between the star delta connection is 80 ms shorter.

Short-circuit current
– The valid selection for a certain value also covers lower levels of short-circuit. For
example, by selecting 80 kA, protection which is also valid for lower values is
obtained (70, 60..kA, at the same voltage). This means a starter with higher
performances at the required breaking capacity. For more economical solutions,
verifying some specific solutions for lower short-circuit levels is recommended.

3/2 ABB SACE

 Motor protection
Notes for use

Notes
To determine a type of coordination univocally, and therefore the apparatus needed to
carry it out, the following must be known:
– motor power in kW and the type;
– rated installation voltage;
– rated current of the motor;
– short-circuit current at the point of installation;
– type of starting: DOL or Y/∆ - Normal or Heavy - Type 1 o Type 2.

Example for using the tables

You want to realize Y/∆ Normal Type 2 starting of a three-phase asynchronous
squirrelcage motor with the following data:

rated voltage Ur = 400 V

3 P = 200 kW
short-circuit current
rated motor power Ik = 50 kA e

The following information is read from the table (star–delta 400 V 50 kA), in
correspondence with the relative line:
Ie (rated current): 349 A
protection device against short-circuit: T5S630 PR221-I In630 circuit-breaker
magnetic trip threshold: I3 = 4410 A
line contactor: A210
delta contactor: A210
star contactor: A185
thermal relay: E320DU320 adjustable 105-320 A
I
(to adjusted to e = 202 A).
∆
3
Caption of symbols

MCB Tmax Isomax Emax

For solutions not shown in these tables, please consult the website:
[Link]
or contact ABB SACE

ABB SACE 3/3

 Motor protection
DOL Type 2 - Normal starting

DOL @ 400/415 V - 35 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1.1 T2N160 MF1.6 21 A9 TA25DU1.4 1 1.4 1.4

0.55 1.5 T2N160 MF1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.9 T2N160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.8 T2N160 MF 3.2 42 A9 TA25DU4 2.8 4 3.2
1.5 3.5 T2N160 MF 4 52 A16 TA25DU5 3.5 5 4
2.2 5 T2N160 MF 5 65 A26 TA25DU6.5 4.5 6.5 5
3 6.6 T2N160 MF 8.5 110 A26 TA25DU8.5 6 8.5 8.5

3 4
5.5
8.6
11.5
T2N160 MF 11
T2N160 MF 12.5
145
163
A30
A30
TA25DU11
TA25DU14
7.5
10
11
14
11
12.5
7.5 15.2 T2N160 MA 20 210 A30 TA25DU19 13 19 19
11 22 T2N160 MA 32 288 A30 TA42DU25 18 25 25
15 28.5 T2N160 MA 52 392 A50 TA75DU42 29 42 42
18.5 36 T2N160 MA 52 469 A50 TA75DU52 36 52 50
22 42 T2N160 MA 52 547 A50 TA75DU52 36 52 50
30 56 T2N160 MA 80 840 A63 TA75DU80 60 80 65
37 68 T2N160 MA 80 960 A75 TA75DU80 60 80 75
45 83 T2N160 MA 100 1200 A95 TA110DU110 80 110 96
55 98 T3N250 MA 160 1440 A110 TA110DU110 80 110 110
75 135 T3N250 MA 200 1800 A145 TA200DU175 130 175 145
90 158 T3N250 MA 200 2400 A185 TA200DU200 150 200 185
110 193 T4N320 PR221-I In320 2720 A210 E320DU320 100 320 210
132 232 T5N400 PR221-I In400 3200 A260 E320DU320 100 320 260
160 282 T5N400 PR221-I In400 4000 A300 E320DU320 100 320 300
200 349 T5N630 PR221-I In630 5040 AF400 E500DU500 150 500 400
250 430 T6N630 PR221-I In630 6300 AF460 E500DU500 150 500 430
290 520 T6N800 PR221-I In800 7200 AF580 E800DU800 250 800 580
315 545 T6N800 PR221-I In800 8000 AF580 E800DU800 250 800 580
355 610 T6N800 PR221-I In800 8000 AF750 E800DU800 250 800 750

3/4 ABB SACE

 Motor protection
DOL Type 2 - Normal starting

DOL @ 400/415 V - 50 kA -Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1.1 T2S160 MF 1.6 21 A9 TA25DU1.4 1 1.4 1.4

0.55 1.5 T2S160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.9 T2S160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.8 T2S160 MF 3.2 42 A9 TA25DU4 2.8 4 3.2
1.5 3.5 T2S160 MF 4 52 A16 TA25DU5 3.5 5 4
2.2 5 T2S160 MF 5 65 A26 TA25DU6.5 4.5 6.5 5
3 6.6 T2S160 MF 8.5 110 A26 TA25DU8.5 6 8.5 8.5
4
5.5
8.6
11.5
T2S160 MF 11
T2S160 MF 12.5
145
163
A30
A30
TA25DU11
TA25DU14
7.5
10
11
14
11
12.5
3
7.5 15.2 T2S160 MA 20 210 A30 TA25DU19 13 19 19
11 22 T2S160 MA 32 288 A30 TA42DU25 18 25 25
15 28.5 T2S160 MA 52 392 A50 TA75DU42 29 42 42
18.5 36 T2S160 MA 52 469 A50 TA75DU52 36 52 50
22 42 T2S160 MA 52 547 A50 TA75DU52 36 52 50
30 56 T2S160 MA 80 840 A63 TA75DU80 60 80 65
37 68 T2S160 MA 80 960 A75 TA75DU80 60 80 75
45 83 T2S160 MA 100 1200 A95 TA110DU110 80 110 96
55 98 T3S250 MA 160 1440 A110 TA110DU110 80 110 110
75 135 T3S250 MA 200 1800 A145 TA200DU175 130 175 145
90 158 T3S250 MA 200 2400 A185 TA200DU200 150 200 185
110 193 T4S320 PR221-I In320 2720 A210 E320DU320 100 320 210
132 232 T5S400 PR221-I In400 3200 A260 E320DU320 100 320 260
160 282 T5S400 PR221-I In400 4000 A300 E320DU320 100 320 300
200 349 T5S630 PR221-I In630 5040 AF400 E500DU500 150 500 400
250 430 T6S630 PR221-I In630 6300 AF460 E500DU500 150 500 430
290 520 T6S800 PR221-I In800 7200 AF580 E800DU800 250 800 580
315 545 T6S800 PR221-I In800 8000 AF580 E800DU800 250 800 580
355 610 T6S800 PR221-I In800 8000 AF750 E800DU800 250 800 750

ABB SACE 3/5

 Motor protection
DOL Type 2 - Normal starting

DOL @ 400/415 V - 70 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1.1 T2H160 MF 1.6 21 A9 TA25DU1.4 1 1.4 1.4

0.55 1.5 T2H160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.9 T2H160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.8 T2H160 MF 3.2 42 A16 TA25DU4 2.8 4 3.2
1.5 3.5 T2H160 MF 4 52 A26 TA25DU5 3.5 5 4
2.2 5 T2H160 MF 5 65 A26 TA25DU6.5 4.5 6.5 5
3 6.6 T2H160 MF 8.5 110 A26 TA25DU8.5 6 8.5 8.5

3 4
5.5
8.6
11.5
T2H160 MF 11
T2H160 MF 12.5
145
163
A30
A50
TA25DU11
TA25DU14
7.5
10
11
14
11
12.5
7.5 15.2 T2H160 MA 20 210 A50 TA25DU19 13 19 19
11 22 T2H160 MA 32 288 A50 TA42DU25 18 25 25
15 28.5 T2H160 MA 52 392 A50 TA75DU42 29 42 42
18.5 36 T2H160 MA 52 469 A50 TA75DU52 36 52 50
22 42 T2H160 MA 52 547 A50 TA75DU52 36 52 50
30 56 T2H160 MA 80 840 A63 TA75DU80 60 80 65
37 68 T2H160 MA 80 960 A75 TA75DU80 60 80 75
45 83 T2H160 MA 100 1200 A95 TA110DU110 80 110 96
55 98 T4H250 PR221-I In160 1360 A110 TA110DU110 80 110 110
75 135 T4H250 PR221-I In250 1875 A145 E200DU200 60 200 145
90 158 T4H250 PR221-I In250 2500 A185 E200DU200 60 200 185
110 193 T4H320 PR221-I In320 2720 A210 E320DU320 100 320 210
132 232 T5H400 PR221-I In400 3200 A260 E320DU320 100 320 260
160 282 T5H400 PR221-I In400 4000 A300 E320DU320 100 320 300
200 349 T5H630 PR221-I In630 5040 AF400 E500DU500 150 500 400
250 430 T6H630 PR221-I In630 6300 AF460 E500DU500 150 500 430
290 520 T6H800 PR221-I In800 7200 AF580 E800DU800 250 800 580
315 545 T6H800 PR221-I In800 8000 AF580 E800DU800 250 800 580
355 610 T6H800 PR221-I In800 8000 AF750 E800DU800 250 800 650

3/6 ABB SACE

 Motor protection
DOL Type 2 - Normal starting

DOL @ 400/415 V - 80 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1.1 T2L160 MF 1.6 21 A9 TA25DU1.4 1 1.4 1.4

0.55 1.5 T2L160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.9 T2L160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.8 T2L160 MF 3.2 42 A16 TA25DU4 2.8 4 3.2
1.5 3.5 T2L160 MF 4 52 A26 TA25DU5 3.5 5 4
2.2 5 T2L160 MF 5 65 A26 TA25DU6.5 4.5 6.5 5
3 6.6 T2L160 MF 8.5 110 A26 TA25DU8.5 6 8.5 8.5
4
5.5
8.6
11.5
T2L160 MF 11
T2L160 MF 12.5
145
163
A30
A50
TA25DU11
TA25DU14
7.5
10
11
14
11
12.5
3
7.5 15.2 T2L160 MA 20 210 A50 TA25DU19 13 19 19
11 22 T2L160 MA 32 288 A50 TA42DU25 18 25 25
15 28.5 T2L160 MA 52 392 A50 TA75DU42 29 42 42
18.5 36 T2L160 MA 52 469 A50 TA75DU52 36 52 50
22 42 T2L160 MA 52 547 A50 TA75DU52 36 52 50
30 56 T2L160 MA 80 840 A63 TA75DU80 60 80 65
37 68 T2L160 MA 80 960 A75 TA75DU80 60 80 75
45 83 T2L160 MA 100 1200 A95 TA110DU110 80 110 96
55 98 T4L250 PR221-I In160 1360 A110 TA110DU110 80 110 110
75 135 T4L250 PR221-I In250 1875 A145 E200DU200 60 200 145
90 158 T4L250 PR221-I In250 2500 A185 E200DU200 60 200 185
110 193 T4L320 PR221-I In320 2720 A210 E320DU320 100 320 210
132 232 T5L400 PR221-I In400 3200 A260 E320DU320 100 320 260
160 282 T5L400 PR221-I In400 4000 A300 E320DU320 100 320 300
200 349 T5L630 PR221-I In630 5040 AF400 E500DU500 150 500 400
250 430 T6L630 PR221-I In630 6300 AF460 E500DU500 150 500 430
290 520 T6L800 PR221-I In800 7200 AF580 E800DU800 250 800 580
315 545 T6L800 PR221-I In800 8000 AF580 E800DU800 250 800 580
355 610 T6L800 PR221-I In800 8000 AF750 E800DU800 250 800 750

ABB SACE 3/7

 Motor protection
DOL Type 2 - Normal starting

DOL @ 440 V - 50 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1 T2H160 MF 1 13 A9 TA25DU1.4 1 1.4 1

0.55 1.4 T2H160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.7 T2H160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.2 T2H160 MF 2.5 33 A9 TA25DU3.1 2.2 3.1 2.5
1.5 3 T2H160 MF 3.2 42 A16 TA25DU4 2.8 4 3.2
2.2 4.4 T2H160 MF 5 65 A26 TA25DU5 3.5 5 5
3 5.7 T2H160 MF 6.5 84 A26 TA25DU6.5 4.5 6.5 6.5

3 4
5.5
7.8
10.5
T2H160 MF 8.5
T2H160 MF 11
110
145
A30
A30
TA25DU11
TA25DU14
7.5
10
11
14
8.5
11
7.5 13.5 T2H160 MA 20 180 A30 TA25DU19 13 19 19
11 19 T2H160 MA 32 240 A30 TA42DU25 18 25 25
15 26 T2H160 MA 32 336 A50 TA75DU32 22 32 32
18.5 32 T2H160 MA 52 469 A50 TA75DU42 29 42 42
22 38 T2H160 MA 52 547 A50 TA75DU52 36 52 45
30 52 T2H160 MA 80 720 A63 TA75DU63 45 63 63
37 63 T2H160 MA 80 840 A75 TA75DU80 60 80 70
45 75 T2H160 MA 100 1050 A95 TA110DU90 65 90 90
55 90 T4H250 PR221-I In160 1200 A110 TA110DU110 80 110 100
75 120 T4H250 PR221-I In250 1750 A145 E200DU200 60 200 145
90 147 T4H250 PR221-I In250 2000 A185 E200DU200 60 200 185
110 177 T4H250 PR221-I In250 2500 A210 E320DU320 100 320 210
132 212 T5H400 PR221-I In320 3200 A260 E320DU320 100 320 220
160 260 T5H400 PR221-I In400 3600 A300 E320DU320 100 320 280
200 320 T5H630 PR221-I In630 4410 AF400 E500DU500 150 500 400
250 410 T6H630 PR221-I In630 5355 AF460 E500DU500 150 500 430
290 448 T6H630 PR221-I In630 6300 AF580 E500DU500* 150 500 500
315 500 T6H800 PR221-I In800 7200 AF580 E800DU800 250 800 580
355 549 T6H800 PR221-I In800 8000 AF580 E800DU800 250 800 580
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

3/8 ABB SACE

 Motor protection
DOL Type 2 - Normal starting

DOL @ 440 V - 65 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 1 T2L160 MF 1 13 A9 TA25DU1.4 1 1.4 1

0.55 1.4 T2L160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
0.75 1.7 T2L160 MF 2 26 A9 TA25DU2.4 1.7 2.4 2
1.1 2.2 T2L160 MF 2.5 33 A9 TA25DU3.1 2.2 3.1 2.5
1.5 3 T2L160 MF 3.2 42 A16 TA25DU4 2.8 4 3.2
2.2 4.4 T2L160 MF 5 65 A26 TA25DU5 3.5 5 5
3 5.7 T2L160 MF 6.5 84 A26 TA25DU6.5 4.5 6.5 6.5
4
5.5
7.8
10.5
T2L160 MF 8.5
T2L160 MF 11
110
145
A30
A30
TA25DU11
TA25DU14
7.5
10
11
14
8.5
11
3
7.5 13.5 T2L160 MA 20 180 A30 TA25DU19 13 19 19
11 19 T2L160 MA 32 240 A30 TA42DU25 18 25 25
15 26 T2L160 MA 32 336 A50 TA75DU32 22 32 32
18.5 32 T2L160 MA 52 469 A50 TA75DU42 29 42 42
22 38 T2L160 MA 52 547 A50 TA75DU52 36 52 45
30 52 T2L160 MA 80 720 A63 TA75DU63 45 63 63
37 63 T2L160 MA 80 840 A75 TA75DU80 60 80 70
45 75 T2L160 MA 100 1050 A95 TA110DU90 65 90 90
55 90 T4H250 PR221-I In160 1200 A110 TA110DU110 80 110 100
75 120 T4H250 PR221-I In250 1750 A145 E200DU200 60 200 145
90 147 T4H250 PR221-I In250 2000 A185 E200DU200 60 200 185
110 177 T4H250 PR221-I In250 2500 A210 E320DU320 100 320 210
132 212 T5H400 PR221-I In320 3200 A260 E320DU320 100 320 220
160 260 T5H400 PR221-I In400 3600 A300 E320DU320 100 320 280
200 320 T5H630 PR221-I In630 4410 AF400 E500DU500 150 500 400
250 410 T6L630 PR221-I In630 5355 AF460 E500DU500 150 500 430
290 448 T6L630 PR221-I In630 6300 AF580 E500DU500* 150 500 500
315 500 T6L800 PR221-I In800 7200 AF580 E800DU800 250 800 580
355 549 T6L800 PR221-I In800 8000 AF580 E800DU800 250 800 580
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

ABB SACE 3/9

 Motor protection
DOL Type 2 - Normal starting

DOL @ 500 V - 50 kA - Type 2 - Normal starting

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type Current I max
Power current the magnetic setting
Pe Ie release min max

[kW] [A] [A] [A] [A] [A]

0.37 0.88 T2L160 MF 1 13 A9 TA25DU1.0 0.63 1 1

0.55 1.2 T2L160 MF 1.6 21 A9 TA25DU1.4 1 1.4 1.4
0.75 1.5 T2L160 MF 1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
1.1 2.2 T2L160 MF 2.5 33 A9 TA25DU3.1 2.2 3.1 2.5
1.5 2.8 T2L160 MF 3.2 42 A16 TA25DU4 2.8 4 3.2
2.2 4 T2L160 MF 4 52 A26 TA25DU5 3.5 5 4
3 5.2 T2L160 MF 6.5 84 A26 TA25DU6.5 4.5 6.5 6.5

3 4
5.5
6.9
9.1
T2L160 MF 8.5
T2L160 MF 11
110
145
A30
A30
TA25DU8.5
TA25DU11
6
7.5
8.5
11
8.5
11
7.5 12.2 T2L160 MF 12.5 163 A30 TA25DU14 10 14 12.5
11 17.5 T2L160 MA 20 240 A30 TA25DU19 13 19 19
15 23 T2L160 MA 32 336 A50 TA75DU25 18 25 25
18.5 29 T2L160 MA 52 392 A50 TA75DU32 22 32 32
22 34 T2L160 MA 52 469 A50 TA75DU42 29 42 42
30 45 T2L160 MA 52 624 A63 TA75DU52 36 52 52
37 56 T2L160 MA 80 840 A75 TA75DU63 45 63 63
45 67 T2L160 MA 80 960 A95 TA80DU80 60 80 80
55 82 T2L160 MA 100 1200 A110 TA110DU90 65 90 90
75 110 T4H250 PR221-I In160 1440 A145 E200DU200 60 200 145
90 132 T4H250 PR221-I In250 1875 A145 E200DU200 60 200 145
110 158 T4H250 PR221-I In250 2250 A185 E200DU200 60 200 170
132 192 T4H320 PR221-I In320 2720 A210 E320DU320 100 320 210
160 230 T5H400 PR221-I In400 3600 A260 E320DU320 100 320 240
200 279 T5H400 PR221-I In400 4000 A300 E320DU320 100 320 280
250 335 T5H630 PR221-I In630 4725 AF400 E500DU500 150 500 400
290 394 T6L630 PR221-I In630 5040 AF460 E500DU500 150 500 430
315 440 T6L630 PR221-I In630 6300 AF580 E500DU500* 150 500 500
355 483 T6L630 PR221-I In630 6300 AF580 E800DU800 250 800 500
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

3/10 ABB SACE

 Motor protection
DOL Type 2 - Normal starting

DOL @ 690 V - 50 kA - Type 2 - Normal starting

Motor MCCB Contactor TC Thermal release Group

Rated Rated Type Setting of Type KORC No. of Type Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 0.6 T2L160 MF1 13 A9 TA25DU0.63 0.4 0.63 0.63
0.55 0.9 T2L160 MF1 13 A9 TA25DU1 0.63 1 1
0.75 1.1 T2L160 MF1.6 21 A9 TA25DU1.4 1 1.4 1.4
1.1 1.6 T2L160 MF1.6 21 A9 TA25DU1.8 1.3 1.8 1.6
1.5 2 T2L160 MF2.5 33 A9 TA25DU2.4 1.7 2.4 2.4
2.2 2.9 T2L160 MF3.2 42 A9 TA25DU3.1 * 2.2 3.1 3.1
3 3.8 T2L160 MF4 52 A9 TA25DU4 * 2.8 4 4
4
5.5
5
6.5
T2L160 MF5
T2L160 MF6.5
65
84
A9
A9
TA25DU5 *
TA25DU6.5 *
3.5
4.5
5
6.5
5
6.5
3
T4L250 PR221-I In 100 150 A95 4L185R/4 13** TA25DU2.4 6 8.5 8.5
7.5 8.8 T4L250 PR221-I In 100 150 A95 4L185R/4 10** TA25DU2.4 7.9 11.1 11.1
11 13 T4L250 PR221-I In 100 200 A95 4L185R/4 7** TA25DU2.4 11.2 15.9 15.9
15 18 T4L250 PR221-I In 100 250 A95 4L185R/4 7** TA25DU3.1 15.2 20.5 20.5
18.5 21 T4L250 PR221-I In 100 300 A95 4L185R/4 6 TA25DU3.1 17.7 23.9 23.9
22 25 T4L250 PR221-I In 100 350 A95 4L185R/4 6 TA25DU4 21.6 30.8 30.8
30 33 T4L250 PR221-I In 100 450 A145 4L185R/4 6 TA25DU5 27 38.5 38.5
37 41 T4L250 PR221-I In 100 550 A145 4L185R/4 4 TA25DU4 32.4 46.3 46.3
45 49 T4L250 PR221-I In 100 700 A145 4L185R/4 4 TA25DU5 40.5 57.8 57.8
55 60 T4L250 PR221-I In 100 800 A145 4L185R/4 3 TA25DU5 54 77.1 77.1
75 80 T4L250 PR221-I In 160 1120 A145 E200DU200 65 200 120
90 95 T4L250 PR221-I In 160 1280 A145 E200DU200 65 200 120
110 115 T4L250 PR221-I In 250 1625 A145 E200DU200 65 200 120
132 139 T4L250 PR221-I In 250 2000 A185 E200DU200 65 200 170
160 167 T4L250 PR221-I In 250 2250 A185 E200DU200 65 200 170
200 202 T5L400 PR221-I In 320 2720 A210 E320DU320 105 320 210
250 242 T5L400 PR221-I In 400 3400 A300 E320DU320 105 320 280
290 301 T5L630 PR221-I In 630 4410 AF400 E500DU500 150 500 350
315 313 T5L630 PR221-I In 630 4410 AF400 E500DU500 150 500 350
355 370 T5L630 PR221-I In 630 5355 AF580 E500DU500*** 150 500 430
For further information about the KORC, please see the “Brochure KORC 1 GB 00-04” catalogue.
* Type 1 coordination
*
Cable cross section= 4 mm2
* No mounting kit to contactor is available; to use mounting kit provide E800DU

ABB SACE 3/11

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 400/415 V - 35 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 1.1 T2N160 MF1.6 21 A9 TA25DU1.4* 1 1.4 1.4
0.55 1.5 T2N160 MF1.6 21 A9 TA25DU1.8* 1.3 1.8 1.6
0.75 1.9 T2N160 MF 2 26 A9 TA25DU2.4* 1.7 2.4 2
1.1 2.8 T2N160 MF 3.2 42 A9 TA25DU4* 2.8 4 3.2
1.5 3.5 T2N160 MF 4 52 A16 TA25DU5* 3.5 5 4
2.2 5 T2N160 MF 5 65 A26 TA25DU6.5* 4.5 6.5 5
3 6.6 T2N160 MF 8.5 110 A26 TA25DU8.5* 6 8.5 8.5

3 4
5.5
8.6
11.5
T2N160 MF 11
T2N160 MF 12.5
145
163
A30
A30
TA25DU11*
TA450SU60 4
7.5
10
11
15
11
12.5
7.5 15.2 T2N160 MA 20 210 A30 TA450SU60 3 13 20 20
11 22 T2N160 MA 32 288 A30 TA450SU60 2 20 30 32
15 28.5 T2N160 MA 52 392 A50 TA450SU80 2 23 40 40
18.5 36 T2N160 MA 52 469 A50 TA450SU80 2 23 40 40
22 42 T2N160 MA 52 547 A50 TA450SU60 40 60 50
30 56 T2N160 MA 80 840 A63 TA450SU80 55 80 65
37 68 T2N160 MA 80 960 A95 TA450SU80 55 80 80
45 83 T2N160 MA 100 1200 A110 TA450SU105 70 105 100
55 98 T3N250 MA 160 1440 A145 TA450SU140 95 140 140
75 135 T3N250 MA 200 1800 A185 TA450SU185 130 185 185
90 158 T3N250 MA 200 2400 A210 TA450SU185 130 185 185
110 193 T4N320 PR221-I In320 2720 A260 E320DU320 100 320 220
132 232 T5N400 PR221-I In400 3200 A300 E320DU320 100 320 300
160 282 T5N400 PR221-I In400 4000 AF400 E500DU500 150 500 400
200 349 T5N630 PR221-I In630 5040 AF460 E500DU500 150 500 430
250 430 T6N630 PR221-I In630 6300 AF580 E500DU500*** 150 500 430
290 520 T6N800 PR221-I In800 7200 AF750 E800DU800 250 800 750
315 545 T6N800 PR221-I In800 8000 AF750 E800DU800 250 800 750
355 610 T6N800 PR221-I In800 8000 AF750 E800DU800 250 800 750
* Provide a by-pass contactor of the same size during motor start-up
* Set trip class 30 on the Type E relays
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

3/12 ABB SACE

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 400/415 V - 50 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 1.1 T2S160 MF 1.6 21 A9 TA25DU1.4* 1 1.4 1.4
0.55 1.5 T2S160 MF 1.6 21 A9 TA25DU1.8* 1.3 1.8 1.6
0.75 1.9 T2S160 MF 2 26 A9 TA25DU2.4* 1.7 2.4 2
1.1 2.8 T2S160 MF 3.2 42 A9 TA25DU4* 2.8 4 3.2
1.5 3.5 T2S160 MF 4 52 A16 TA25DU5* 3.5 5 4
2.2 5 T2S160 MF 5 65 A26 TA25DU6.5* 4.5 6.5 5
3 6.6 T2S160 MF 8.5 110 A26 TA25DU8.5* 6 8.5 8.5
4
5.5
8.6
11.5
T2S160 MF 11
T2S160 MF 12.5
145
163
A30
A30
TA25DU11*
TA450SU60 4
7.5
10
11
15
11
12.5
3
7.5 15.2 T2S160 MA 20 210 A30 TA450SU60 3 13 20 20
11 22 T2S160 MA 32 288 A30 TA450SU60 2 20 30 32
15 28.5 T2S160 MA 52 392 A50 TA450SU80 2 23 40 40
18.5 36 T2S160 MA 52 469 A50 TA450SU80 2 23 40 40
22 42 T2S160 MA 52 547 A50 TA450SU60 40 60 50
30 56 T2S160 MA 80 840 A63 TA450SU80 55 80 65
37 68 T2S160 MA 80 960 A95 TA450SU80 55 80 80
45 83 T2S160 MA 100 1200 A110 TA450SU105 70 105 100
55 98 T3S250 MA 160 1440 A145 TA450SU140 95 140 140
75 135 T3S250 MA 200 1800 A185 TA450SU185 130 185 185
90 158 T3S250 MA 200 2400 A210 TA450SU185 130 185 185
110 193 T4S320 PR221-I In320 2720 A260 E320DU320 100 320 220
132 232 T5S400 PR221-I In400 3200 A300 E320DU320 100 320 300
160 282 T5S400 PR221-I In400 4000 AF400 E500DU500 150 500 400
200 349 T5S630 PR221-I In630 5040 AF460 E500DU500 150 500 430
250 430 T6S630 PR221-I In630 6300 AF580 E500DU500*** 150 500 430
290 520 T6S800 PR221-I In800 7200 AF750 E800DU800 250 800 750
315 545 T6S800 PR221-I In800 8000 AF750 E800DU800 250 800 750
355 610 T6S800 PR221-I In800 8000 AF750 E800DU800 250 800 750
* Provide a by-pass contactor of the same size during motor start-up
* Set trip class 30 on the Type E relays
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

ABB SACE 3/13

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 440 V - 50 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 1 T2H160 MF 1 13 A9 TA25DU1.4* 1 1.4 1
0.55 1.4 T2H160 MF 1.6 21 A9 TA25DU1.8* 1.3 1.8 1.6
0.75 1.7 T2H160 MF 2 26 A9 TA25DU2.4* 1.7 2.4 2
1.1 2.2 T2H160 MF 2.5 33 A9 TA25DU3.1* 2.2 3.1 2.5
1.5 3 T2H160 MF 3.2 42 A16 TA25DU4* 2.8 4 3.2
2.2 4.4 T2H160 MF 5 65 A26 TA25DU5* 3.5 5 5
3 5.7 T2H160 MF 6.5 84 A26 TA25DU6.5* 4.5 6.5 6.5

3 4
5.5
7.8
10.5
T2H160 MF 8.5
T2H160 MF 11
110
145
A30
A30
TA25DU11*
TA25DU14*
7.5
10
11
14
8.5
11
7.5 13.5 T2H160 MA 20 180 A30 TA450SU60 4 10 15 15
11 19 T2H160 MA 32 240 A30 TA450SU80 3 18 27 27
15 26 T2H160 MA 32 336 A50 TA450SU60 2 20 30 32
18.5 32 T2H160 MA 52 469 A50 TA450SU80 2 28 40 40
22 38 T2H160 MA 52 547 A50 TA450SU80 2 28 40 40
30 52 T2H160 MA 80 720 A63 TA450SU60 40 60 60
37 63 T2H160 MA 80 840 A95 TA450SU80 55 80 80
45 75 T2H160 MA 100 1050 A110 TA450SU105 70 105 100
55 90 T4H250 PR221-I In160 1200 A145 E200DU200 60 200 145
75 120 T4H250 PR221-I In250 1750 A185 E200DU200 60 200 185
90 147 T4H250 PR221-I In250 2000 A210 E320DU320 100 320 210
110 177 T4H250 PR221-I In250 2500 A260 E320DU320 100 320 220
132 212 T5H400 PR221-I In320 3200 A300 E320DU320 100 320 220
160 260 T5H400 PR221-I In400 3600 AF400 E500DU500 150 500 400
200 320 T5H630 PR221-I In630 4410 AF460 E500DU500 150 500 430
250 410 T6H630 PR221-I In630 5355 AF580 E500DU500*** 150 500 430
290 448 T6H630 PR221-I In630 6300 AF750 E500DU500*** 150 500 500
315 500 T6H800 PR221-I In800 7200 AF 750 E800DU800 250 800 750
355 549 T6H800 PR221-I In800 8000 AF 750 E800DU800 250 800 750
* Provide a by-pass contactor of the same size during motor start-up
* Set trip class 30 on the Type E relays
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

3/14 ABB SACE

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 440 V - 65 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 1 T2L160 MF 1 13 A9 TA25DU1.4* 1 1.4 1
0.55 1.4 T2L160 MF 1.6 21 A9 TA25DU1.8* 1.3 1.8 1.6
0.75 1.7 T2L160 MF 2 26 A9 TA25DU2.4* 1.7 2.4 2
1.1 2.2 T2L160 MF 2.5 33 A9 TA25DU3.1* 2.2 3.1 2.5
1.5 3 T2L160 MF 3.2 42 A16 TA25DU4* 2.8 4 3.2
2.2 4.4 T2L160 MF 5 65 A26 TA25DU5* 3.5 5 5
3 5.7 T2L160 MF 6.5 84 A26 TA25DU6.5* 4.5 6.5 6.5
4
5.5
7.8
10.5
T2L160 MF 8.5
T2L160 MF 11
110
145
A30
A30
TA25DU11*
TA25DU14*
7.5
10
11
14
8.5
11
3
7.5 13.5 T2L160 MA 20 180 A30 TA450SU60 4 10 15 15
11 19 T2L160 MA 32 240 A30 TA450SU80 3 18 27 27
15 26 T2L160 MA 32 336 A50 TA450SU60 2 20 30 32
18.5 32 T2L160 MA 52 469 A50 TA450SU80 2 28 40 40
22 38 T2L160 MA 52 547 A50 TA450SU80 2 28 40 40
30 52 T2L160 MA 80 720 A63 TA450SU60 40 60 60
37 63 T2L160 MA 80 840 A95 TA450SU80 55 80 80
45 75 T2L160 MA 100 1050 A110 TA450SU105 70 105 100
55 90 T4H250 PR221-I In160 1200 A145 E200DU200 60 200 145
75 120 T4H250 PR221-I In250 1750 A185 E200DU200 60 200 185
90 147 T4H250 PR221-I In250 2000 A210 E320DU320 100 320 210
110 177 T4H250 PR221-I In250 2500 A260 E320DU320 100 320 220
132 212 T5H400 PR221-I In320 3200 A300 E320DU320 100 320 220
160 260 T5H400 PR221-I In400 3600 AF400 E500DU500 150 500 400
200 320 T5H630 PR221-I In630 4410 AF460 E500DU500 150 500 430
250 410 T6L630 PR221-I In630 5355 AF580 E500DU500*** 150 500 430
290 448 T6L630 PR221-I In630 6300 AF750 E500DU500*** 150 500 500
315 500 T6L800 PR221-I In800 7200 AF750 E800DU800 250 800 750
355 549 T6L800 PR221-I In800 8000 AF750 E800DU800 250 800 750
* Provide a by-pass contactor of the same size during motor start-up
* Set trip class 30 on the Type E relays
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

ABB SACE 3/15

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 500 V - 50 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 0.88 T2L160 MF 1 13 A9 TA25DU1.0* 0.63 1 1
0.55 1.2 T2L160 MF 1.6 21 A9 TA25DU1.4* 1 1.4 1.4
0.75 1.5 T2L160 MF 1.6 21 A9 TA25DU1.8* 1.3 1.8 1.6
1.1 2.2 T2L160 MF 2.5 33 A9 TA25DU3.1* 2.2 3.1 2.5
1.5 2.8 T2L160 MF 3.2 42 A16 TA25DU4* 2.8 4 3.2
2.2 4 T2L160 MF 4 52 A26 TA25DU5* 3.5 5 4
3 5.2 T2L160 MF 6.5 84 A26 TA25DU6.5* 4.5 6.5 6.5

3 4
5.5
6.9
9.1
T2L160 MF 8.5
T2L160 MF 11
110
145
A30
A30
TA25DU8.5*
TA25DU11*
6
7.5
8.5
11
8.5
11
7.5 12.2 T2L160 MF 12.5 163 A30 TA450SU60 4 10 15 12.5
11 17.5 T2L160 MA 20 240 A30 TA450SU60 3 13 20 20
15 23 T2L160 MA 32 336 A50 TA450SU60 2 20 30 30
18.5 29 T2L160 MA 52 392 A50 TA450SU80 2 27.5 40 40
22 34 T2L160 MA 52 469 A50 TA450SU80 2 27.5 40 40
30 45 T2L160 MA 52 624 A63 TA450SU60 40 60 52
37 56 T2L160 MA 80 840 A75 TA450SU60 40 60 60
45 67 T2L160 MA 80 960 A95 TA450SU80 55 80 80
55 82 T2L160 MA 100 1200 A145 TA450SU105 70 105 100
75 110 T4H250 PR221-I In160 1440 A145 E200DU200 60 200 145
90 132 T4H250 PR221-I In250 1875 A185 E200DU200 60 200 170
110 158 T4H250 PR221-I In250 2125 A210 E320DU320 100 320 210
132 192 T4H320 PR221-I In320 2720 A260 E320DU320 100 320 220
160 230 T5H400 PR221-I In400 3200 A300 E320DU320 100 320 280
200 279 T5H400 PR221-I In400 3600 AF400 E500DU500 150 500 400
250 335 T5H630 PR221-I In630 4725 AF460 E500DU500 150 500 430
290 394 T6L630 PR221-I In630 5040 AF580 E500DU500*** 150 500 430
315 440 T6L630 PR221-I In630 6300 AF750 E500DU500*** 150 500 500
355 483 T6L630 PR221-I In630 6300 AF750 E500DU500*** 150 500 500
* Provide a by-pass contactor of the same size during motor start-up
* Set trip class 30 on the Type E relays
* Connection Kit not available. To use the connection kit, replace with relay E800DU800

3/16 ABB SACE

 Motor protection
DOL Type 2 - Heavy duty

DOL @ 690 V - 50 kA - Type 2 - Heavy duty

Motor MCCB Contactor Thermal release Group

Rated Rated Type Setting of Type Type** No. of Current I max
Power current the magnetic turns of setting
release the CT
Pe Ie primary min max
coil
[kW] [A] [A] [A] [A] [A]
0.37 0.6 T2L160 MF1 13 A9 TA25DU0.63(X) 0.4 0.63 0.63
0.55 0.9 T2L160 MF1 13 A9 TA25DU1(X) 0.63 1 1
0.75 1.1 T2L160 MF1.6 21 A9 TA25DU1.4(X) 1 1.4 1.4
1.1 1.6 T2L160 MF1.6 21 A9 TA25DU1.8(X) 1.3 1.8 1.6
1.5 2 T2L160 MF2.5 33 A9 TA25DU2.4(X) 1.7 2.4 2.4
2.2 2.9 T2L160 MF3.2 42 A9 TA25DU3.1 *(X) 2.2 3.1 3.1
3 3.8 T2L160 MF4 52 A9 TA25DU4 *(X) 2.8 4 4
4
5.5
5
6.5
T2L160 MF5
T2L160 MF6.5
65
84
A9
A9
TA25DU5 *(X)
TA25DU6.5 *(X)
3.5
4.5
5
6.5
5
6.5
3
T4L250 PR221-I In 100 150 A95 TA450SU60 7** 5.7 8.6 8.5
7.5 8.8 T4L250 PR221-I In 100 150 A95 TA450SU60 5** 8 12 12
11 13 T4L250 PR221-I In 100 200 A95 TA450SU60 4** 10 15 15
15 18 T4L250 PR221-I In 100 250 A95 TA450SU60 3** 13 20 20
18.5 21 T4L250 PR221-I In 100 300 A95 TA450SU80 3 18 27 27
22 25 T4L250 PR221-I In 100 350 A95 TA450SU60 2 20 30 30
30 33 T4L250 PR221-I In 100 450 A145 TA450SU80 2 27.5 40 40
37 41 T4L250 PR221-I In 100 550 A145 TA450SU60 40 60 60
45 49 T4L250 PR221-I In 100 700 A145 TA450SU60 40 60 60
55 60 T4L250 PR221-I In 100 800 A145 TA450SU80 55 80 80
75 80 T4L250 PR221-I In 160 1120 A145 TA450SU105 70 105 105
90 95 T4L250 PR221-I In 160 1280 A145 TA450SU105 70 105 105
110 115 T4L250 PR221-I In 250 1625 A185 TA450SU140 95 140 140
132 139 T4L250 PR221-I In 250 2000 A210 E320DU320 105 320 210
160 167 T4L250 PR221-I In 250 2250 A210 E320DU320 105 320 210
200 202 T5L400 PR221-I In 320 2720 A260 E320DU320 105 320 220
250 242 T5L400 PR221-I In 400 3400 AF400 E500DU500 150 500 350
290 301 T5L630 PR221-I In 630 4410 AF400 E500DU500 150 500 350
315 313 T5L630 PR221-I In 630 4410 AF460 E500DU500 150 500 400
355 370 T5L630 PR221-I In 630 5355 AF580 E500DU500*** 150 500 430
* Type 1 coordination
*
Cable cross section= 4 mm2
* No mounting kit to contactor is available; to use mounting kit provide E800DU800
(X) Provide a by-pass contactor of the same size during motor start-up.

ABB SACE 3/17

 Motor protection
Star-delta - Type 2

Star-delta - Type 2 @ 400/415 V - 35 kA - 50/60 Hz

Motor MCCB Contactor Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star type [A]
type type type
18.5 36 T2N160 MA52 469 A50 A50 A26 TA75DU25 18-25
22 42 T2N160 MA52 547 A50 A50 A26 TA75DU32 22-32
30 56 T2N160 MA80 720 A63 A63 A30 TA75DU42 29-42
37 68 T2N160 MA80 840 A75 A75 A30 TA75DU52 36-52
45 83 T2N160 MA100 1050 A75 A75 A30 TA75DU63 45-63
55 98 T2N160 MA100 1200 A75 A75 A40 TA75DU63 45-63
75 135 T3N250 MA160 1700 A95 A95 A75 TA110DU90 66-90
90 158 T3N250 MA200 2000 A110 A110 A95 TA110DU110 80-110
110 193 T3N250 MA200 2400 A145 A145 A95 TA200DU135 100-135
132 232 T4N320 PR221-I In320 2880 A145 A145 A110 E200DU200 60-200

3 160
200
282
349
T5N400 PR221-I In400
T5N630 PR221-I In630
3600
4410
A185
A210
A185
A210
A145
A185
E200DU200
E320DU320
60-200
100-320
250 430 T5N630 PR221-I In630 5670 A260 A260 A210 E320DU320 100-320
290 520 T6N630 PR221-I In630 6300 AF400 AF400 A260 E500DU500 150-500
315 545 T6N800 PR221-I In800 7200 AF400 AF400 A260 E500DU500 150-500
355 610 T6N800 PR221-I In800 8000 AF400 AF400 A260 E500DU500 150-500

Star-delta - Type 2 @ 400/415 V - 50 kA - 50/60 Hz

Motor MCCB Contactor Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star type [A]
type type type
18.5 36 T2S160 MA52 469 A50 A50 A26 TA75DU25 18-25
22 42 T2S160 MA52 547 A50 A50 A26 TA75DU32 22-32
30 56 T2S160 MA80 720 A63 A63 A30 TA75DU42 29-42
37 68 T2S160 MA80 840 A75 A75 A30 TA75DU52 36-52
45 83 T2S160 MA100 1050 A75 A75 A30 TA75DU63 45-63
55 98 T2S160 MA100 1200 A75 A75 A40 TA75DU63 45-63
75 135 T3S250 MA160 1700 A95 A95 A75 TA110DU90 66-90
90 158 T3S250 MA200 2000 A110 A110 A95 TA110DU110 80-110
110 193 T3S250 MA200 2400 A145 A145 A95 TA200DU135 100-135
132 232 T4S320 PR221-I In320 2880 A145 A145 A110 E200DU200 60-200
160 282 T5S400 PR221-I In400 3600 A185 A185 A145 E200DU200 60-200
200 349 T5S630 PR221-I In630 4410 A210 A210 A185 E320DU320 100-320
250 430 T5S630 PR221-I In630 5670 A260 A260 A210 E320DU320 100-320
290 520 T6S630 PR221-I In630 6300 AF400 AF400 A260 E500DU500 150-500
315 545 T6S800 PR221-I In800 7200 AF400 AF400 A260 E500DU500 150-500
355 610 T6S800 PR221-I In800 8000 AF400 AF400 A260 E500DU500 150-500

3/18 ABB SACE

 Motor protection
Star-delta - Type 2

Star-delta - Type 2 @ 440 V - 50 kA - 50/60 Hz

Motor MCCB Contactor Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star type [A]
type type type
18.5 32 T2H160 MA52 392 A50 A50 A16 TA75DU25 18-25
22 38 T2H160 MA52 469 A50 A50 A26 TA75DU25 18-25
30 52 T2H160 MA80 720 A63 A63 A26 TA75DU42 29-42
37 63 T2H160 MA80 840 A75 A75 A30 TA75DU42 29-42
45 75 T2H160 MA80 960 A75 A75 A30 TA75DU52 36-52
55 90 T2H160 MA100 1150 A75 A75 A40 TA75DU63 45-63
75 120 T4H250 PR221-I In250 1625 A95 A95 A75 TA80DU80 60-80
90 147 T4H250 PR221-I In250 1875 A95 A95 A75 TA110DU110 80-110
110 177 T4H250 PR221-I In250 2250 A145 A145 A95 E200DU200 60-200
132 212 T4H320 PR221-I In320 2720 A145 A145 A110 E200DU200 60-200
160
200
260
320
T5H400 PR221-I In400
T5H630 PR221-I In630
3200
4095
A185
A210
A185
A210
A145
A185
E200DU200
E320DU320
60-200
100-320
3
250 410 T5H630 PR221-I In630 5040 A260 A260 A210 E320DU320 100-320
290 448 T6H630 PR221-I In630 5670 AF400 AF400 A260 E500DU500 150-500
315 500 T6H630 PR221-I In630 6300 AF400 AF400 A260 E500DU500 150-500
355 549 T6H800 PR221-I In800 7200 AF400 AF400 A260 E500DU500 150-500

Star-delta - Type 2 @ 440 V - 65 kA - 50/60 Hz

Motor MCCB Contactor Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star type [A]
type type type
18.5 32 T2L160 MA52 392 A50 A50 A16 TA75DU25 18-25
22 38 T2L160 MA52 469 A50 A50 A26 TA75DU25 18-25
30 52 T2L160 MA80 720 A63 A63 A26 TA75DU42 29-42
37 63 T2L160 MA80 840 A75 A75 A30 TA75DU42 29-42
45 75 T2L160 MA80 960 A75 A75 A30 TA75DU52 36-52
55 90 T2L160 MA100 1150 A75 A75 A40 TA75DU63 45-63
75 120 T4H250 PR221-I In250 1625 A95 A95 A75 TA80DU80 60-80
90 147 T4H250 PR221-I In250 1875 A95 A95 A75 TA110DU110 80-110
110 177 T4H250 PR221-I In250 2250 A145 A145 A95 E200DU200 60-200
132 212 T4H320 PR221-I In320 2720 A145 A145 A110 E200DU200 60-200
160 260 T5H400 PR221-I In400 3200 A185 A185 A145 E200DU200 60-200
200 320 T5H630 PR221-I In630 4095 A210 A210 A185 E320DU320 100-320
250 410 T5H630 PR221-I In630 5040 A260 A260 A210 E320DU320 100-320
290 448 T6H630 PR221-I In630 5670 AF400 AF400 A260 E500DU500 150-500
315 500 T6H630 PR221-I In630 6300 AF400 AF400 A260 E500DU500 150-500
355 549 T6H800 PR221-I In800 7200 AF400 AF400 A260 E500DU500 150-500

ABB SACE 3/19

 Motor protection
Star-delta - Type 2

Star-delta - Type 2 @ 500 V - 50 kA - 50/60 Hz

Motor MCCB Contactor Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star type [A]
type type type
22 34 T2L160 MA52 430 A50 A50 A16 TA75DU25 18-25
30 45 T2L160 MA52 547 A63 A63 A26 TA75DU32 22-32
37 56 T2L160 MA80 720 A75 A75 A30 TA75DU42 29-42
45 67 T2L160 MA80 840 A75 A75 A30 TA75DU52 36-52
55 82 T2L160 MA100 1050 A75 A75 A30 TA75DU52 36-52
75 110 T4H250 PR221-I In250 1375 A95 A95 A50 TA80DU80 60-80
90 132 T4H250 PR221-I In250 1750 A95 A95 A75 TA110DU90 65-90
110 158 T4H250 PR221-I In250 2000 A110 A110 A95 TA110DU110 80-110
132 192 T4H320 PR221-I In320 2560 A145 A145 A95 E200DU200 60-200
160 230 T4H320 PR221-I In320 2880 A145 A145 A110 E200DU200 60-200

3 200
250
279
335
T5H400 PR221-I In400
T5H630 PR221-I In630
3400
4410
A210
A210
A210
A210
A145
A185
E320DU320
E320DU320
100-320
100-320
290 394 T5H630 PR221-I In630 5040 A260 A260 A210 E320DU320 100-320
315 440 T6L630 PR221-I In630 5760 AF400 AF400 A210 E500DU500 150-500
355 483 T6L630 PR221-I In630 6300 AF400 AF400 A260 E500DU500 150-500

Star-delta - Type 2 @ 690 V - 50 kA - 50/60 Hz

Motor MCCB Contactor TC Thermal release

Pe [kW] Ie [A] Type Im [A] line delta star KORC Coils type [A]
type type type
5.5 6.5* T4L250 PR221-I In100 150 A95 A95 A26 4L185R/4** 13 TA25DU2.4** 6-8.5
7.5 8.8* T4L250 PR221-I In100 150 A95 A95 A26 4L185R/4** 10 TA25DU2.4** 7.9-11.1
11 13* T4L250 PR221-I In100 200 A95 A95 A26 4L185R/4** 7 TA25DU2.4** 11.2-15.9
15 18* T4L250 PR221-I In100 250 A95 A95 A26 4L185R/4** 7 TA25DU3.1** 15.2-20.5
18.5 21 T4L250 PR221-I In100 300 A95 A95 A30 4L185R/4** 6 TA25DU3.1** 17.7-23.9
22 25 T4L250 PR221-I In100 350 A95 A95 A30 4L185R/4** 6 TA25DU4** 21.6-30.8
30 33 T4L250 PR221-I In100 450 A145 A145 A30 4L185R/4** 6 TA25DU5** 27-38.5
37 41 T4L250 PR221-I In100 550 A145 A145 A30 TA75DU52** 36-52
45 49 T4L250 PR221-I In100 650 A145 A145 A30 TA75DU52** 36-52
55 60 T4L250 PR221-I In100 800 A145 A145 A40 TA75DU52** 36-52
75 80 T4L250 PR221-I In160 1120 A145 A145 A50 TA75DU52 36-52
90 95 T4L250 PR221-I In160 1280 A145 A145 A75 TA75DU63 45-63
110 115 T4L250 PR221-I In160 1600 A145 A145 A75 TA75DU80 60-80
132 139 T4L250 PR221-I In250 1875 A145 A145 A95 TA200DU110 80-110
160 167 T4L250 PR221-I In250 2125 A145 A145 A110 TA200DU110 80-110
200 202 T4L320 PR221-I In320 2720 A185 A185 A110 TA200DU135 100-135
250 242 T5L400 PR221-I In400 3200 AF400 AF400 A145 E500DU500 150-500
290 301 T5L400 PR221-I In400 4000 AF400 AF400 A145 E500DU500 150-500
315 313 T5L630 PR221-I In630 4410 AF400 AF400 A185 E500DU500 150-500
355 370 T5L630 PR221-I In630 5040 AF400 AF400 A210 E500DU500 150-500
400 420 T5L630 PR221-I In630 5670 AF460 AF460 A210 E500DU500 150-500
450 470 T5L630 PR221-I In630 6300 AF460 AF460 A260 E500DU500 150-500
For further information about the KORC, please see the “Brochure KORC 1 GB 00-04” catalogue.
*
Cable cross section = 4 mm2
* Connect the overload/relay upstream the line-delta mode.

3/20 ABB SACE

 Motor protection
DOL Type 2 - Start-up with MP release

DOL @ 400/415 V - 35 kA - Type 2 - Start-up with MP release

Motor MCCB Contactor Group

Pe [kW] Ie [A] Type I1* [A] I3 [A] type I max [A]

30 56 T4N250 PR222MP In100 40-100 600 A95 95

37 68 T4N250 PR222MP In100 40-100 700 A95 95
45 83 T4N250 PR222MP In100 40-100 800 A95 95
55 98 T4N250 PR222MP In160 64-160 960 A145 145
75 135 T4N250 PR222MP In160 64-160 1280 A145 145
90 158 T4N250 PR222MP In200 80-200 1600 A185 185
110 193 T5N400 PR222MP In320 128-320 1920 A210 210
132 232 T5N400 PR222MP In320 128-320 2240 A260 260
160 282 T5N400 PR222MP In320 128-320 2560 AF400** 320
200 349 T5N400 PR222MP In400 160-400 3200 AF400 400
250
290
430
520
T6N800 PR222MP In630
T6N800 PR222MP In630
252-630
252-630
5040
5670
AF460
AF580
460
580
3
315 545 T6N800 PR222MP In630 252-630 5670 AF580 580
355 610 T6N800 PR222MP In630 252-630 5670 AF750 630
* For heavy-duty start set the electronic release tripping class to class 30
* In case of normal start use AF300

DOL @ 400/415 V - 50 kA - Type 2 - Start-up with MP release

Motor MCCB Contactor Group

Pe [kW] Ie [A] Type I1* [A] I3 [A] type I max [A]

30 56 T4S250 PR222MP In100 40-100 600 A95 95

37 68 T4S250 PR222MP In100 40-100 700 A95 95
45 83 T4S250 PR222MP In100 40-100 800 A95 95
55 98 T4S250 PR222MP In160 64-160 960 A145 145
75 135 T4S250 PR222MP In160 64-160 1280 A145 145
90 158 T4S250 PR222MP In200 80-200 1600 A185 185
110 193 T5S400 PR222MP In320 128-320 1920 A210 210
132 232 T5S400 PR222MP In320 128-320 2240 A260 260
160 282 T5S400 PR222MP In320 128-320 2560 AF400** 320
200 349 T5S400 PR222MP In400 160-400 3200 AF400 400
250 430 T6S800 PR222MP In630 252-630 5040 AF460 460
290 520 T6S800 PR222MP In630 252-630 5670 AF580 580
315 545 T6S800 PR222MP In630 252-630 5670 AF580 580
355 610 T6S800 PR222MP In630 252-630 5670 AF750 630
* For heavy-duty start set the electronic release tripping class to class 30
* In case of normal start use AF300

ABB SACE 3/21

 Motor protection
DOL Type 2 - Start-up with MP release

DOL @ 440 V - 50 kA - Type 2 - Start-up with MP release

Motor MCCB Contactor Group

Pe [kW] Ie [A] Type I1* [A] I3 [A] type I max [A]

30 52 T4H250 PR222MP In100 40-100 600 A95 93

37 63 T4H250 PR222MP In100 40-100 700 A95 93
45 75 T4H250 PR222MP In100 40-100 800 A95 93
55 90 T4H250 PR222MP In160 64-160 960 A145 145
75 120 T4H250 PR222MP In160 64-160 1120 A145 145
90 147 T4H250 PR222MP In200 80-200 1400 A185 185
110 177 T5H400 PR222MP In320 128-320 1920 A210 210
132 212 T5H400 PR222MP In320 128-320 2240 A260 240
160 260 T5H400 PR222MP In320 128-320 2560 AF400** 320
200 320 T5H400 PR222MP In400 160-400 3200 AF400 400

3 250
290
370
436
T6H800 PR222MP In630
T6H800 PR222MP In630
252-630
252-630
4410
5040
AF460
AF460
460
460
315 500 T6H800 PR222MP In630 252-630 5040 AF580 580
355 549 T6H800 PR222MP In630 252-630 5670 AF580 580
* For heavy-duty start set the electronic release tripping class to class 30
* In case of normal start use AF300

DOL @ 500 V - 50 kA - Type 2 - Start-up with MP release

Motor MCCB Contactor Group

Pe [kW] Ie [A] Type I1* [A] I3 [A] type I max [A]

30 45 T4H250 PR222MP In100 40-100 600 A95 80

37 56 T4H250 PR222MP In100 40-100 600 A95 80
45 67 T4H250 PR222MP In100 40-100 700 A145 100
55 82 T4H250 PR222MP In100 40-100 800 A145 100
75 110 T4H250 PR222MP In160 64-160 1120 A145 145
90 132 T4H250 PR222MP In160 64-160 1280 A145 145
110 158 T4H250 PR222MP In200 80-200 1600 A185 170
132 192 T5H400 PR222MP In320 128-320 1920 A210 210
160 230 T5H400 PR222MP In320 128-320 2240 A260 260
200 279 T5H400 PR222MP In400 160-400 2800 AF400** 400
250 335 T5H400 PR222MP In400 160-400 3200 AF400 400
290 395 T6H800 PR222MP In630 252-630 5040 AF460 460
315 415 T6H800 PR222MP In630 252-630 5040 AF460 460
355 451 T6H800 PR222MP In630 252-630 5670 AF580 580
* For heavy-duty start set the electronic release tripping class to class 30
* In case of normal start use AF300

3/22 ABB SACE

 Motor protection
DOL Type 2 - Start-up with MP release

DOL @ 690 V - 50 kA - Type 2 - Start-up with MP release

Motor MCCB Contactor Group

Pe [kW] Ie [A] Type I1* [A] I3 [A] type I max [A]

45 49 T4L250 PR222MP In100 40-100 600 A145 100

55 60 T4L250 PR222MP In100 40-100 600 A145 100
75 80 T4L250 PR222MP In100 40-100 800 A145 100
90 95 T4L250 PR222MP In160 64-160 960 A145 120
110 115 T4L250 PR222MP In160 64-160 1120 A145 120
132 139 T4L250 PR222MP In160 64-160 1440 A185 160
160 167 T4L250 PR222MP In200 80-200 1600 A185 170
200 202 T5L400 PR222MP In320 128-320 1920 A210 210
250 242 T5L400 PR222MP In320 128-320 2240 A300 280
290 301 T5L400 PR222MP In400 160-400 2800 AF400 350
315 313 T5L400 PR222MP In400 160-400
* For heavy-duty start set the electronic release tripping class to class 30
3200 AF400 350
3
** In case of normal start use AF300

ABB SACE 3/23

 TabelleCoordinationcoordinamentotables

IntroduzioneSwitch-disconnectors

Notes for use ............................................................................................................. 4/2

MCCB - MCS ............................................................................................................ 4/4
MCCB - OT/OETL ..................................................................................................... 4/5

ABB SACE 4/1

 Switch-disconnectors
Notes for use

The following tables give the coordination between circuit-breakers and switch-
disconnectors of the following series: Tmax, Isomax, OT and OTEL.
The tables give the value of the maximum short-circuit current in kA for which
protection between the combination of circuit-breaker - switch-disconnector is verified,
for voltages up to 415 V.
The MCCB-OT-OETL tables are also valid at a voltage of 440 V. It is important to
check that the breaking capacities at 440 V (present in the technical catalogues of the
circuit-breakers) are compatible with the installation data.
With regard to the switch-disconnectors of the Emax series, on the other hand, it must
be checked that the short-circuit current value at the point of installation is lower than
the value of the short-time withstand current (Icw) of the switch-disconnector and that
the peak current value is lower than the making capacity current value (Icm).
The protection against overload of the Emax switch-disconnector must also be
checked. This can be carried out by means of an Emax series circuit-breaker of the
same size. Please consult the “Emax Low Voltage air circuit-breakers” technical
catalogue for the characteristics of Emax switch-disconnectors.

4/2 ABB SACE

 Switch-disconnectors
Notes for use

Note
The letter T indicates the switch-disconnector protection up to the breaking-capacity
of the circuit-breaker.
The following tables give the breaking capacities at 415 V AC for Isomax and Tmax
circuit-breakers.

Tmax @ 415 V AC Isomax @ 415 V AC

Version Icu [kA] Version Icu [kA]
B 16 S 50
C 25 H 65
N 36 L100
S 50
H 70
L (T2) 85
L (T4, T5) 120
L (T6) 100
V 200

Caption
MCS = switch-disconnectors derived from the moulded-case circuit-breakers (Tmax TD, Isomax SD)
MCCB = moulded-case circuit-breakers (Tmax, Isomax) 4
SD = switch-disconnectors
OT = OT series switch-disconnectors
OETL = OETL series switch-disconnectors
Ith = traditional thermal current at 40 °C in free air
Icw = short-time withstand current r.m.s. for 1 second

For moulded-case or air circuit-breakers:

TM = thermomagnetic release
– TMD (Tmax)
– TMA (Tmax)
M = magnetic only release
– MF (Tmax)
– MA (Tmax)
EL = electronic release
– PR211/P - PR212/P (Isomax)
– PR221DS - PR222DS (Tmax)

Caption of symbols

MCB Tmax Isomax Emax

For solutions not shown in these tables, please consult the website:
[Link]
or contact ABB SACE

ABB SACE 4/3

 Switch-disconnectors
Supply side circuit-breaker: MCCB
Load side switch-disconnectors: MCS

MCCB - MCS @ 415 V

Load s. T1D T3D T4D T5D T6D S7D

Icw [kA] 2 3.6 3.6 6 15 25

Supply s. Version Icu [kA] Ith[A] 160 250 320 400 630 630 800 1000 1250 1600
Iu[A]
B 16 16 16 16 16 16 16 16 16 16 16
T1 C 25 160 25 25 25 25 25 25 25 25 25 25
N 36 36 36 36 36 36 36 36 36 36 36
N 36 36 36 36 36 36 36 36 36 36 36
T2 S 50 160 50 50 50 50 50 50 50 50 50 50
H 70 70 70 70 70 70 70 70 70 70 70
L 85 85 85 85 85 85 85 85 85 85 85
T3 N 36 250 36 36 36 36 36 36 36 36 36
S 50 50 50 50 50 50 50 50 50 50
N 36 36* 36 36 36 36 36 36 36 36
S 50 250 50* 50 50 50 50 50 50 50 50
T4 H 70 70* 70 70 70 70 70 70 70 70
320
L 120 120* 120 120 120 120 120 120 120 120

4 V
N
200
36
200* 200 200
36*
200
36
200
36
200
36
200
36
200
36
200
36
S 50 400 50* 50 50 50 50 50 50
T5 H 70 70* 70 70 70 70 70 70
630
L 120 120* 120 120 120 120 120 120
V 200 200* 200 200 200 200 200 200
N 35 630 35* 35* 35 35 35
S 50 50* 50* 50 50 50
T6 H 70 800 70* 70* 70 70 70
1000
L 100 100* 100* 100 100 100
S 50 1250 50* 50* 50
S7 H 65 65* 65* 65
1600
L 100 100* 100* 100

* Value valid only with I1 (MCCB) ∆ Ith (MCS).

4/4 ABB SACE

 Switch-disconnectors
Supply side circuit-breaker: MCCB
Load side switch-disconnectors: OT/OETL

MCCB - OT/OETL @ 415 V

Load s. OT16 OT25 OT32 OT45 OT63 OT80 OT100 OT125 OT160 OT200-400 OETL630-1600

Icw[kA] 0.5 0.5 0.5 1 1.5 1.5 2.5 2.5 4 8-15 17-50
Ith [A] 25 32 40 63 80 100 115 125 200 200-400 630 - 1600
Supply s. Release In [A]
16 4 4 4 7 20 20 T T T T T
20 4 4 4 7 20 20 T T T T T
25 4 4 4 7 18 18 T T T T T
32 4 4 4 7 18 18 T T T T T
40 4** 4 4 7 18 18 T T T T T
T1 TM 50 4** 4 6 18 18 T T T T T
63 4** 6 18 18 T T T T T
80 6** 16 16 T T T T T
100 16** 16 T T T T T
125 16 T T T T T
160 16** T** T T T T
16 20 20 20 50 T T T T T T T
20 14 14 14 36 T T T T T T T
25 12 12 12 25 70 70 T T T T T
32
40
12
12**
12
10
12
10
25
20
70
36
70
36
T
T
T
T
T
T
T
T
T
T 4
TM 50 10** 10 20 36 36 T T T T T
63 10** 20 36 36 T T T T T
T2 80 7** 16 16 50 50 T T T
100 16** 16 50 50 T T T
125 16 50 50 T T T
160 16** 50** 50 T T T
25 10 10 10 16 50 50 T T T T T
EL 63 8* 8* 8* 12 30 30 T T T T T
100 8* 8* 6* 16* 16 50 50 T T T
160 6* 16* 16* 50* 50 T T T
63 3,5** 5 8 8 25 25 T T T
80 5** 8 8 24 24 T T T
100 8** 8 21 21 T T T
T3 TM 125 8** 20 20 40 T T
160 18** 18 36 T T
200 18** 36 T T
250 36 T T
20 8 8 8 20 T T T T T T T
32 6** 6 6 12 40 40 T T T T T
50 6** 6 12 40 40 T T T T T
T4 TM 80 8** 16 16 50 50 T T T
100 10** 10 19 20 100 100 T
160 10** 19 20 100 100 T
250 20** 100 100 T
EL 100-320 10* 10* 19* 20* 100* 100* T

Select the lowest value between the Icu of the circuit-breaker and the value indicated
* Maximum setting of the overload threshold PR2xx = 1.28*Ith OTxx/OETLxx
* I1 = 0.7 x I

ABB SACE 4/5

 Switch-disconnectors
Supply side circuit-breaker: MCCB
Load side circuit-breaker: OT/OETL

MCCB - OT/OETL @ 415 V

Load s. OT OT OT OT OETL OETL OETL OETL OETL

200 250 315 400 630 800 1000 1250 1600
Icw[kA] 8 8 15 15 17 17 50 50 50
Supply s. Release Ith [A] 200 250 315 400 630 800 1000 1250 1600
Iu [A]
TM 320 50 50 100 100 T T T T T
T5 400 50** 50 100 100 T T T T T
EL 320-630 50* 50* 100* 100 T T T T T
TM 630 25 30 70 70 T T T
T6 800 28** 60** 60 T T T
EL 630-800-1000 22* 22* 28* 60 60 T T T
1000 30* 30 50 50 50
S7 EL 1250 30* 30* 50 50 50
1600 20* 30* 30* 50* 50* 50

Select the lowest value between the Icu of the circuit-breaker and the value indicated
* Maximum setting of the overload threshold PR2xx = 1.28*Ith OTxx/OETLxx
* I1 = 0.7 x I

4/6 ABB SACE

 Tipografia
PrintedinItaly
1SDC007004D0204-12/2004

Due to possible developments of standards as well as of materials,

the characteristics and dimensions specified in the present
catalogue may only be considered binding after confirmation by
ABB SACE.

ABB SACE S.p.A

An ABB Group company
L.V. Breakers
Via Baioni, 35
24123 Bergamo, Italy
Tel.: +39 035.395.111 - Telefax: +39 035.395.306-433

[Link]