Ramakrishna Mission
Shilpamandira
Electronics & Telecommunication Engineering
PROJECT REPORT ON:
IR Remote Mains Switching
CERTIFICATE
This is to certify that the project entitled as “IR
Remote Mains Switching” which has been
completed and submitted by SUBHAJIT DAS,
Roll No. (D………..-….) in partial fulfillment of
the requirement for the award of the degree of
Diploma in Electronics and
Telecommunication Engineering for the session
2013-2016 in the department of Electronics and
Telecommunication Engineering, Ramakrishna
Mission Shilpamandira.
……………………..
……………………...
(External Examiner) (Internal
Examiner)
CERTIFICATE
This is to certify that the project entitled as “IR
Remote Mains Switching” which has been
completed and submitted by SUBHAJIT DAS,
Roll No. (D………..-….) in partial fulfillment of
the requirement for the award of the degree of
Diploma in Electronics and
Telecommunication Engineering for the session
2013-2016 in the department of Electronics and
Telecommunication Engineering, Ramakrishna
Mission Shilpamandira.
D.C.O
Guided by
…………………
……………….......
(Gopika Nandan Pal)
(Debashish Pal)
ACKNOWLEDGEME
NT
We take the space here to express deepest sense
of gratitude to Debashish Pal sir for his kind
assistance and co-operation. We are really
indebted to him for the variable time he spent
with us clearing the doubt in spite of their busy
schedule. Indeed, this project report “IR Remote
Mains Switching” would never have been
successful without his deepest concerns and
hands of help.
We thank our department for helping us greatly
during the project.
At last but not the least we would like to thank
our batch mates for helping us to collect some
specific data regarding this project “IR Remote
Mains Switching”.
GROUP MEMBERS
Name Roll no.
Subhadip Saha 14
Rakesh Bera 15
Debabrata Adak 16
Sujit Sarkar 17
Krishnashri Maji 18
Saibal Sen 19
Suman Das 20
Raunak Sen 22
Subhajit Das 23
Utsab Maity 24
INDEX
Sl. No. Content Page
1. Objectives 1
2. Project Work Overview 2
3. Block Diagram 3
4. Circuit Diagram 4-9
5. Circuit Explanation 10-12
6. Program 11-15
7. Program Explanation 16
8. Component List 17-18
9. Applications 18
10. Advantages 18-19
11. Future Aspects 20
12. Conclusion
13. Snapshots
OBJECTIVES
Learn microcontroller programming
concept.
To be familiar with Arduino
microcontroller system.
To get concept of IR based remote
control system.
To make use of electronic relay control
circuitry.
Mains switching using relay board
electronically.
Above all to get a strong practical view
on theoretical knowledge.
Project Work
Overview
In the first day the project was decided. Components
requirement and cost are evaluated.
Next day the components was collected for1 relay
BLOCK DIAGRAM
PSU
SMPS
Support Board
IR Sensor Microcontroller
Relay
Output/Load Board
2
CIRCUIT DIAGRAM
PSU support board
(with SMPS) 3
Relay Board
4
Relay Board
5
Microcontroller Board
6
Front Panel
7
Packaging
8
CIRCUIT
EXPLANATION
Power Supply Unit: -
Here four diodes are used as full bridge
rectifier. Then input voltage is applied to
LM2940CT-5.0 voltage regulator. Then
output voltage is fed to the eight headers
(4+ve and 4-ve). The Green LED indicates
the healthy condition of the unit.
Relay board circuit: -
The circuit consists of six relays. Each
relay can switch six individual load.
Q (1,3,5,7,9,11) are relay drivers and Q
(2,4,6,8,10,12) are used to drive the even
numbered transistors as well as the
LEDs.
The diodes are arranged to freewheel the
relays because current lags behind the
voltage so it does not immediately stop.
9
Microcontroller Module: -
The U1 atmega328 microcontroller is
used as the brain of this system.
The pin no. 7&20 and 8&22 is shorted
and acted as VCC and GND
respectively. Two headers are joined
with them.
The six male headers (1 to 6) are
connected with the six relays.
The three female headers are used to
receive VCC and GND and the one
signal from TSOP-1738 IR receiver.
Header no. Arduino pin Physical pin
1 D8 14
2 D7 13
3 D6 12
4 D5 11
5 D4 6
6 D3 5
IR D13 19
10
Pin Diagram:
LM2940CT-5.0
1. Input
2. GND
3. Output
Pin Description:
ATmega328
Pin No Connection
11-14 Relay board i/p
7,21 Vcc
8,20 GND
13 TSOP 1738 receiver
11
PROGRAM
#include <IRremote.h> // necessary for remote data
decoding
#include <FRONTECH_TV_Remote.h> // remote controller
const byte OUTPin[] = { // output OUT pin no
3, 4, 5, 6, 7, 8
};
const byte noOfOutputs = sizeof(OUTPin); // number of
OUTPUTs
boolean onStatus[noOfOutputs]; // states if OUT is ON (1) or
OFF (0)
boolean onStatusTemp[noOfOutputs]; // temporary onStatus
const byte Indicator = 9; // indicator blinks when remote data
recieves
byte i; // used for iteration control in loops
const byte RECV_PIN = 13; // recive pin for IR
IRrecv irrecv(RECV_PIN); // calling constructor of IRrecv
decode_results results; // decoded input results stored in results
object
boolean stateChanged = false;
void setup()
{
// defining all output pins as OUTPUT
for (i = 0; i < noOfOutputs; i++) {
pinMode(OUTPin[i], OUTPUT);
}
pinMode(Indicator, OUTPUT);
[Link](); // Start the receiver
12
// setting all OUTPUTs to off initially
for (i = 0; i < noOfOutputs; i++) {
onStatus[i] = false;
}
}
void loop() {
if ([Link](&results)) {
long recv = [Link];
[Link](); // Receive the next value
// checks for Remote control inputs
checkRemote(recv);
}
if (stateChanged) {
// switches the couputs accordingly
setOutputs();
}
delay(50);
}
// setting all OUT pins according to their respective onStatus
void setOutputs() {
// blinking indicator
digitalWrite(Indicator, HIGH);
delay(300);
digitalWrite(Indicator, LOW);
for (i = 0; i < noOfOutputs; i++) {
digitalWrite(OUTPin[i], onStatus[i]);
}
}
// returns true if any output is on
boolean getOUTAny() {
for (i = 0; i < noOfOutputs; i++) {
if (onStatus[i] == true) {
return true;
}
}
return false;
13
}
// checks remote data and sets onStatus
void checkRemote(long remoteValue) {
switch (remoteValue) {
case NUM_1 :
onStatus[0] = !onStatus[0];
stateChanged = true;
break;
case NUM_2 :
onStatus[1] = !onStatus[1];
stateChanged = true;
break;
case NUM_3 :
onStatus[2] = !onStatus[2];
stateChanged = true;
break;
case NUM_4 :
onStatus[3] = !onStatus[3];
stateChanged = true;
break;
case NUM_5 :
onStatus[4] = !onStatus[4];
stateChanged = true;
break;
case NUM_6 :
onStatus[5] = !onStatus[5];
stateChanged = true;
break;
case POWER :
stateChanged = true;
if (getOUTAny()) {
// setting all OUT pins to LOW
for (i = 0; i < noOfOutputs; i++) { // storing current
onStatus to temp location
onStatusTemp[i] = onStatus[i];
onStatus[i] = false;
}
}
else { //setting all OUT pins to HIGH
for (i = 0; i < noOfOutputs; i++) {
14
// retriving stored onStatus
onStatus[i] = onStatusTemp[i];
}
}
}
}
PROGRAM
EXPLANATION
Variables
OUTPin[] and onStatus[] used together to define their
respective value for a single load.
They represent different properties of same output.
Their index number must be same when accessing
them.
OUTPin[] contains the output pin numbers on the
microcontroller / arduino.
onStatus[] represents their on status, true(1) for on and
false(0) for off. Initially 0, as the all off.
Functions
void setup(), does initial setup (compulsory).
void loop(), loop through iterations.
void setOutputs(), sets outputs HIGH or LOW
depending on onStatus[].
boolean getOUTAny(), returns true if any output is on.
void checkRemote(long remoteValue), checks for
remote inputs, takes action on onStatus[] accordingly.
15
When user presses a button on the remote, the data is
received by IR receiver. Then it is decoded by decoder
library. Based on received data, output is switched.
For 1-6 output is directly switched. For power
button, current status stored and if any load is on they
turned off, or stored value is mimicked in output.
COMPONENT LIST
Relay Board
Sl.
Price
No Components Specification Quantity Total
(each)
.
PCV relay, 6v,
1. Relay 6 20 120
SPDT
Screw
2. 3 pin 6 20 120
Terminal
3. Transistor BC 547 12 5 60
4. Diode 1N4007 6 1 6
Blue, 2v 6
5. LED 1 7
Green, 2v 1
1.8kΩ, 0.25W 6 0.5 3
6. Resistor
330Ω,0.25W 7 0.5 3
7. Header 40pin male 1 Set 15 15
8. Vero Board IC vero 1 30 30
9. Wire Single core 2m 5 10
Total 374
Microcontroller Board
Sl. Components Specification Quantit Price Total
No y (each)
16
.
Microcontrolle
1. ATmega 328 1 150 150
r
2. Base 28 pin, 0.3” 1 5 5
3. Vero Board IC vero 1 10 10
40pin male 1 Set 15 15
4. Header
40pin female 1 Set 15 15
5. IR Receiver TSOP 1738 1 20 20
Total 215
PSU Support Board
Sl. Quantit Price
Components Specification Total
No. y (each)
1. 5v Regulator LM2940CT-5.0 1 35 35
470µF, 50v 1 5 5
2. Capacitor
10µF, 40v 1 3 3
3. Resistor 220Ω, 0.5w 1 1 1
4. LED Green, 2v 1 1 1
5. Header 40pin male 1 Set 15 15
Total 60
Packaging with Front Panel
Sl.
Quantit Price
No Components Specification Total
y (each)
.
3.5”x6”x2” 1 35
1. Plastic Box 65
4”x4”x2” 1 30
2. LED Green, 2v 7 1 7
3. Resistor 220Ω, 0.25w 7 0.5 3
4. LED Holder Small plastic 7 3 21
17
5. Switch Toggle, 2Amp. 1 7 7
6. Header 40pin male 1 Set 15 15
7. Shrink Tube 0.5cm 1m 10 10
Total 128
Sl No. Item Price/Costing Total
1. Relay Board 374
2. MCU Board 215
3. SMPS (6v) 250
1147
4. PSU Support Board 60
5. Packaging 128
6. Jumper 120
APPLICATIONS
Remote controlled AC equipment switching.
Light fan switching.
Car garage.
Door switching.
ADVANTAGES
Any type of load can be switch (AC/DC) up
to few amps.
18
Easy to use.
Reliable as relay is use instead of
semiconductor device.
High efficiency as SMPS is used as power
supply, no semiconductor switch is used for
mains load switching thus negligible
semiconductor loss.
FUTURE ASPECTS
To cope with the modern generation everything has
to be IoT implementation thus devices should be
controlled using internet (or a standard network).
So an internet module can be added to this project,
for which space is left.
A common DTMF receiver cum decoder can also
be added for DTMF control.
Wi-Fi can also be implemented for using it as
wireless medium.
Bluetooth connection can also be established with
this device, for any non-Wi-Fi mobile.
For practical industrial implementation this points
has to be followed: 19
o Relay board size has to be flexible.
CONCLUSION
This project implements regular IR system
with standard IR remote. Thus as it is easy to
operate for the end user, it may also interfere with
equipment’s signal. The receiver has to be placed
where there is no other IR receiver is placed.
The relay board is hand constructed thus, it
can’t be directly implemented in ac mains. For
implementation the custom made or a standard
relay board has to be used.
The program is made to operate 6 loads. To
increase the no of load we can modify the
program and to decrease the no of load we may
just disconnect the relay connection.
20
EXECUTION
SNAPSHOTS
No Load is on
1st Load is turned on 21
2nd Load is turned on
22
